No Internet Access Via Cat5 Cable Wireless Or Internet Dongle?
Aug 24, 2012
I have a Sony Vaio running Windows 7 Home Premium. Yesterday I accessed the Internet at the office over a Cat5 cable. Last night I accessed the Internet at home via my USB Internet dongle (actually an O2 mobile phone). Today neither works. I have also tried to connect to the Internet via Wireless and that does not work either.Needless to say my desktop (using the same Cat5 cable) works. My mobile phone can access the Internet on it own. And others can get the wireless to work.My Vaio can connect to all three; however, all three say "No Internet access".I changed nothing between last night and this morning. I have scanned through the list of Windows Updates and nothing has been downloaded in the past week. I have turned off my firewalls (in both McAfee and Symantec Endpoint Protection). I have run the three NETSH reset commands with Administrator privileges. I have rebooted my machine numerous times. Nothing works.
View 4 Replies
ADVERTISEMENT
Jun 7, 2012
at my house if i replaced a cat5 cable with a cat6 would i see increased download speeds?
View 5 Replies
View Related
Mar 8, 2013
Region : India
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
ISP : MTS
i am using tp-link router tl-mr3020.. having problem with internet access..it shows my isp (mts) network and got connected also.. it also shows me send and receive data.. but there is no internet access through web browsers .i have tried multiple web browsers (IE / Chrome / Mozilla Firefox)..but the problem remains same.. my ISP network is MTS .. Huwai Device EC-122 with CDMA 2G network.
View 1 Replies
View Related
Oct 31, 2012
I have an ASUS RTN66U running Tomato firmware.I have temporary (a month or so) Internet access via a Huawei E3131 3G USB dongle. I am posting this question using said Internet access.
I would like other machines on my network to be able to access the Internet in the usual fashion. That is, through my ASUS router.My initial thought was to plug the dongle into the router and configure it to connect. However, it seems tomato does not support my dongle because I get a message to that effect in the log.
So my next thought was to "point" my router at my Windows machine which has the dongle plugged into it. Thus, any machine connecting to the router would then route through my Windows machine to the Internet.
View 2 Replies
View Related
May 23, 2012
Have had ADSL installed through a router, connected the wireless router and it works fine Have since connected the original router via -120mtrs of CAT5 cable to extend to the house. Connection through LAN is fine into desktop however the minute we try to connect an additional wireless router the connection fails. We have even put the LAN from the second Wireless into the desktop and there is no connectivity.We have had a technician come to sort the problem, they advise that they have no explanation as to why the LAN works from the distance but the wireless does not. They have suggested that we need to cut the CAT5 half way and put an antenna up to connect the two routers.
View 1 Replies
View Related
Jan 10, 2012
I have one laptop and a wifi dongle and a router. I want to receive internet on my wireless device of my laptop and want to broadcast or share internet from wifi dongle(TP-LINK).
View 2 Replies
View Related
Apr 26, 2012
I am basic user of Wireless WAG200G, I am using only as router,the problem is that i could set the wireless properly. When i restart the computer, I couldn't get internet access unless I go to ( 192.168.1.1) & do rebooting for the device. I believe that the setting are not correct.
View 2 Replies
View Related
Jun 24, 2012
How do I set-up my IBM computer to a D-Link DI-624 router with only one Cat 5 connection on back of computer.
View 1 Replies
View Related
Jul 29, 2011
I am installing 60 meters of overhead telephone cables between two buildings. which is better cat5 or cat 6 in terms of durability?
View 3 Replies
View Related
Sep 29, 2012
I am installing a network in my small business and was given a spool of Cat5 cable to run wires... I know the length in feet of cable that I was given, but I was wondering if there is some kind of markers on the cable to tell me how much is left... I will be charged for it by foot after I'm done, and I want to know how much I've used. Do I have to just use a measuring tape? Seems unnecessarily complicated... I've checked the wire but can't see any marker of the length remaining.
View 1 Replies
View Related
Sep 5, 2012
can i get such settings with which i can connect my dongle with wifi router so that i can connect my tablets and mobile to use the internet of mobile...or is there ny cable available in market which connects the dongle directly to my mobile for using internet>?
View 4 Replies
View Related
Jan 28, 2013
I have MTS data card (model ZTE AC 2787) USB dongle which I am using to connect to internet. If I use it directly on my laptop or desktop, it's working fine.I want to share this internet connection over my wifi / LAN. I tried to configure virtual hotspot via connectify and 'virtual router by codeplex' but all failed. Even I tried with my friends 3g wifi router but it wont working anywahere.
View 2 Replies
View Related
Oct 1, 2012
can we share internet connection via usb dongle in lan network
View 1 Replies
View Related
Jul 1, 2011
I just need a usb dongle to connect my acer n30 handheld to my internet
View 2 Replies
View Related
Jul 16, 2012
I'm having trouble connecting my 02 dongle to the internet using my router. My router is a TP-LINK MR3420 and my 02 modem device is E1752. I checked to see if the modem is compatible and it says it is. I went through the configuration that was given to me with the router and I tried using you tube but nothing. Do i need to get a static I.P address off my Internet provider? If I plug my 02 USB dongle directly into my computer it works perfectly and I got the router to work using a Ethernet cable and plugging it into the WAN port at the back of the router but I would prefer to let it connect through the 3g port
View 3 Replies
View Related
Mar 29, 2011
I have Netgear router and can't connect to Sony TVI thought earlier comments would solve my problems with my Sony KDL32EX713 but No.I didn't do anything at the router admin side as I couldn't see what could be changed (I'm on Vista). Its IP is 192.168.0.1I looked at adding a wireless device but it lost me.On the TV I tried the manual set up on that Bordersman suggested with the above in the default and DNS lines. leaving the sub net unchanged at 255.255.0.0 and the IP as 192.168.1.15.I said No to Proxy sever (didn't understand the comment about DHCP. It searched and came back with wireless device ok but local and internet connection failed
View 8 Replies
View Related
Feb 1, 2012
I want to connect my mini wespro laptop with internet through dongle.
View 1 Replies
View Related
Jan 28, 2012
can i connect a cat6 cable to a cat5 wall jack
View 1 Replies
View Related
May 16, 2012
I have my PC connected to the internet by way of a USB WiFi dongle, tapping into the neighbours internet access (with permission).Obviously, this leaves my RJ45 Ethernet connection on the PC, free and unused.I have a CCTV system also, which, if to get the most out of it, requires an internet connection via RJ45 Ethernet.Is it possible to allow my CCTV system access to the internet via Ethernet, connected to my PC, and then using the WiFi dongle access which the PC is already using, also?If so, how would one do this, after physically connecting the Ethernet cable between the PC and the CCTV system DVR?
View 1 Replies
View Related
Aug 7, 2012
I want to know if Cisco Router 1905 is compatible for connecting USB Internet dongle for VPN Tunnel configuration at USB port of same router. If Yes then how to open that port for config. Find the show tech logs of Cisco Router 1905 attached.
View 1 Replies
View Related
Mar 8, 2011
I have plugged my computer into the modem by way of a Ethernet cable and I immediately got a Local Area Network 2 icon that said a network cable is unplugged. Ive checked the cable with this PC, and it works. i tried this:1.) Shut dowm your PC.2.) Unplug the power cord. 3.) If you have a laptop, remove the battery as well. 4.) Walk away from the problem for at least 30 minutes. 5.) When you return, reconnect battery and power cord.5.) Start as usual.6.) If this solves the problem, take 20 minutes and post this to all of those message boards that you didn't find the solution to.
And This:Try a Simple Power Cycle ( as it is called so in Tech Terms )i,e Switch of the Computer/S , Router, Modem of your ISP Wait for 4 to 5 mins Switch on the Modem -- Wait untill all the lights come up and then again wait for 2 mins Switch on the Router -- Wait for 3 mins Switch on all other computers that are working, then check conectivity Switch on this computer that has a problem, then Try browsing.
This resolves most issues ( Basically it is the static in the unused ports that gets discharged )It that does not happen, delete all existing Lan Connection, Uninstall your network Driver, Reinstall the Drivers, then reconfigure you net connection then try It still that does not work out and you still get the " Network Cable Unplugged " Msg Then Unplug the Cable Then go to Start > Run > type regedit Navigate to HKEY_CLASSES_ROOTCLSIDThen Delete the key below {7007ACCF-3202-11D1-AAD2-00805FC1270E} Then Restart the comp and reconnect the cable and then tryand this:Using windows xp, the quick fix for this is to reinstall the drivers for your NIC
View 14 Replies
View Related
Feb 20, 2012
I've been given a used Dell Latitude laptop and need to access the web to register Microsoft Office, which is currently unlicensed on my machine. I took the cable connector from the back of my PC and put it into the port of the Dell, hoping that that would be sufficient. However, it doesn't connect. The gubbins that is displayed for the local area connection status says something about 80 packets sent and only 8 received.
View 9 Replies
View Related
Jun 10, 2012
I have a desktop running windows XP Professional x32 SP3 and my network adapter is a Realtek PCIe GBE Family Controller. The desktop is connected to the network with an ethernet cable.Up until yesterday the internet connectivity just stopped working. I am seeing a very low number of received packets as opposed to the high number when it was working. It is showing that it is connected to the network but I still can't access the internet. Also I should mention that the desktop is at work and it is connected to a DHCP server that assigns IP addresses. I have updated all the drivers and I have used Winsock Fix and Netsh but it still isn't working. However the weird thing is that if assign a static IP address to it...it works. But I can't do this because I am not suppose to hook it up to the ports assigned to the switch for static IP's. It has to be connected to the DHCP switch. Why does it work when assigned a static but not if it gets an IP assigned by the DHCP server or switch. Also even if I try to reset, renew or release the IP...when I connect again it still gives me the same IP. It wont change.
View 1 Replies
View Related
Nov 11, 2012
Over the passed couple of weeks I have experienced issues trying to connect to the internet via the LAN Ports. My main PC and a Xbox cannot connect to the internet even though 3 laptops have no problems using the Wifi connectivity.I have had two live chats with Cisco engineers and the first resolution was to perform a firmware upgrade which did solve the issue for a day or two. I think it was more to do with reset the modem/router rather than the firmware upgrade. The second session ended with the eingineer advising me to take the equipment back to PC and seek a replacement simply because Ciso have nothing in writing relating to this problem.
View 6 Replies
View Related
May 5, 2013
Appended below are the following log files:
0. ipconfig /all 1. TechGuy SysInfo Log 2. HijackThis Log 3. attach log from dds.scr (note: this program did not create a file named dds.txt.) 4. ark log from GMER 5. FSS log from Farbar *************************************************************************** ********** 0. ipconfig /all Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:Documents and SettingsRick>ipconfig /all Windows IP
[code]....
View 3 Replies
View Related
Jul 18, 2011
I have 1 PC and 2 laptops. All are connect to the WAG160N router. All 3 can access the internet but they cannot see each other, not even by ping.I have turned my Kaperksy internet Security off and this makes no difference. Windows Firewall is turn off.
View 2 Replies
View Related
Dec 12, 2011
Recently I shifted to ADSL2+ Internet broadband.So purchased "CISCO Linksys WAG120N" router as my firewall hardware( FortiGate60) had no any port to connect to ADSL.Now I'm accessing internet throug the above Linksys router and do not use the firewall as I don't know how to configure the firewall to get the internet access through firewall from the router.My earlier broadband service was directly connected to the firewall's WAN port as it was compatible.configure the firewall to access the internet from the router through the firewall.
View 2 Replies
View Related
Dec 26, 2010
I have local WI-Fi network with 2 Macs, 2 PC's, iPhone, iPod and i Pad at home on Link sys WAG120N router. On i Pad when I try to connect to Internet I have to turn WiFi off and on. It works for a while but after waking i Pad from sleep I have to switch off and on again. It really drives me crazy. Sometimes (hardly ever) it happens on my iPhone 4 (same network setup as on i Pad). Other devices connect to Internet whenever I need.
View 9 Replies
View Related
Nov 17, 2012
have a tata photan, now i want to connect tata photan to pc via data cable, any data cables available in the market, if i connect this type, incresing speed- this is my understanding , is that right?
View 1 Replies
View Related
Jun 20, 2012
I do not have access to internet (I'm on some unsecured internet from around here now, very slow). When I start the internetdiagnostics from windows, he says it's the modem or the connection from laptop, router, modem to internet. However, the lights indicating internet and dsl on the modem are brightly burning and the router shows nothing abnormal too.
I have a WPA2-PSK security, the modem is Zyxel. Also, the ethernetcable portal on my laptop is broken, so I can't do anything non-wireless. My phone has the same problem with this internet, it can get a connection, but no internet.
View 3 Replies
View Related
Aug 26, 2012
The detected problem is the connection between my access point, router, or cable modem and the Internet is broken.The network gateway is accessible, but Windows couldn't receive network traffic from the Internet.All other devices (iPad, Xbox, android phone) have no problem connecting to the Internet.Desktop is the only one experiencing the connection issue.
View 1 Replies
View Related
Jan 31, 2012
My laptop died last week and have been using my husbands, which I hate! We had some issues with computer freezing on some webpages or after being on webpages for awhile (like facebook). Yesterday it froze and I could not get it back on. When he got home he did scan disk (which I also did) and got it working after going into safe mode and doing system restore. He said an update had gotten through and messed things up. Anyhow, after he was on it a few hours last night, we lost connection. I figured the crazy weather was the culprit but it has been off all day. Our router is working and connecting but the adapter is not. Also our home phone says there is no line. We have unplugged everything several times, checked to make sure everything is in the right spots, I have even reset the router and rebooted the adapter. I uninstalled and restalled the adapter also. It is now telling me that "the connection between your access point, router, or cable modem and the Internet is broken". The only lights I have on the adapter are power, battery, DS and now the US light is blinking. The online and link lights are not on.
View 3 Replies
View Related
Nov 7, 2012
Today I purchased a Motorola SURFboard extreme Cable Modem DOCSIS 3.0 in order to replace my old modem which is out of date and has been very slow as of late. I connected the coaxial cable, Ethernet cable(to Linksys wireless router), and power expecting it to simply work. All four lights came on green (power, downstream, upstream, connectivity). The downstream light turned blue which indicates a bonded connection.The device light was blinking on the modem. I connected to my wireless router, but no internet access. I then tried connecting my laptop to the modem directly via Ethernet cable, still no access. I think that rules out the router being the problem. I also ruled out my laptop being the problem as the same thing is occurring with my other laptop and desktop. I called my ISP (Cox Cable) and had them re-establish connection with my modem, this did nothing. I thought for sure this meant I had purchased a faulty modem; I hooked up my old modem and the results were the same, the modem connected fully with no problem (all four lights were green) but I have no internet access.
View 3 Replies
View Related
