Computer Loses Signal Unless Very Close To Router?
Sep 28, 2011
About a week ago my laptop started acting strange. I noticed when I brought my computer to my room (which is where i usually use my computer) it said that there were connections available where the signal bar is. Which is odd because it usually just auto connects. So i clicked on the signal bar and connected to my internet, but it lost the connection shortly after so I clicked connect again and it said windows was unable to connect to the router. Then shortly after that it said no connections were available. So i brought the computer to the computer to the family room ,where the router is, to check the router. It was nothing wrong with the router so I looked back at the computer and it was automatically connected to the internet with a five bar connection, but when i left the family room with the computer it immediately lost the signal. So i decided i should just stay in the family room. The next day the same problem occured and i went back to the family room to use the computer but i noticed the connection wasnt usually at five bars like it usually is wen im that close to the router but it was 4 bars or 3.
The next day i went over my fathers house for the weekend, and when im over there i pretty much always have a five bar connection even though im not in the same room as the router because im 1 floor directly above the router. Now when i used the computer over my dads house it had a 3 bar connection, disconnected from the internet at times, and when i try to connect bak it said that windows could not connect to router like it had said in my room bak at my own house, even though it always used to have a very high connection before this problem happened. So wen i got bak to my house i went to the family room to connect to the internet and now im having the same problems i had over my dads house. Now i try deleting some programs to see if they affected the internet and have even turned off some start off services on using mpconfig but that didnt work either
View 11 Replies
ADVERTISEMENT
Aug 30, 2012
I have been disappointed by the range of the EA4500 compared to previous routers, but I am most puzzled by it's behavior. I may get an "excellent" connection close to the router (one room away) and speeds up to 65 Mps, but after a few minutes of surfing the web the signal strength and speed can drop substantially.
The problem is the worst at a distance (one floor down in our house, maybe 30 feet away in total) where the signal strength may start at "good" and a speed of perhaps 30 Mps, but then after 3-4 minutes drops to "poor" and maybe 5 Mps.
View 4 Replies
View Related
Jun 24, 2011
I'm currently using a Lenovo V360 and my issue is that my computer, which connects via wi-fi, disconnects from the network randomly. The network will be completely removed from the list of available networks. The other networks available will still be visible. I tried turning off the wi-fi button on my laptop and turning it back on, but the list of available networks still does not include the network I was recently connected to. The only way to see the network on my Lenovo is to restart the computer. The connection works perfectly after I restart. It is definitely not the network's problem because I am still connected to the same network with my other laptop. If necessary, my laptop runs Windows 7, my router is a D-Link, and the encryption is WPA.
View 5 Replies
View Related
Mar 26, 2011
successfully installed Windows 7 x64 on my computer this week, but the computer sometimes loses contact with my WD 1TB Book live NAS(When trying to copy Big FILE). When this happens, I restart the computer, and the drive usually reappears. I just bought this hard drive two days agoInstead of simply failing to recognize it, I sometimes get "not responding" errors when trying to open files.My hard drive (Western Digital My Book Live WDBACG0010HCH 1TBI contacted Western Digital support, Still no reply from them. still waitingi find some hardware forum to check this out .. also not solution yeti change my router,off firewall, also the same problem.
View 1 Replies
View Related
Oct 17, 2011
I am having problems connecting to my wireless internet. We were getting a poor signal so we moved our router to our living room where we always are, but now we can't connect. We tried resetting everything, turned on and off several times. Went to the linksys wireless set up page, changed SSID and password. Still can't connect with the computer or our iphones. It shows our SSID is there but won't connect. My internet when plug directly to the computer works fine (I am using it now). My computer can connect to the router Linksys WRT54G, we just can't get it to connect to the wireless.
View 1 Replies
View Related
Feb 6, 2012
I just started using NMAP and found that port 139 is open on my router. Browsing through the router's settings I don't see any option for closing ports or disabling NetBios.... how should I go about securing this port?
Here is my router. [URL]
View 4 Replies
View Related
Jun 17, 2011
I am having a problem with my router disconnecting every time that I close a browser window. I am pretty sure that it is a problem with either my Desktop or my WiFi usb card that is connected to my Desktop. I have tested this on my laptop and it doesn't seem to have the same issue. Has any heard of this or does any have a solution to how I can get this working correctly?
View 3 Replies
View Related
Nov 23, 2011
I have a dlink wbr 2310 router and i keep on getting hit offline on my xbox 360 because my parents set my router on open connection so anyone close enough to pick it up can use it and I'm trying to close the connection so they would have to know my password to use it?
View 1 Replies
View Related
Mar 15, 2012
So finally that my e4200 is capable of disabling wps i run in to another question.
how to close ports 139 445 ? these are open by default and i didnt figure out how to close them, in browser setup..
and YES port 139 IS a security issue. people denying this, are the same, that denied any vulnearibilties to wps.
View 1 Replies
View Related
Dec 19, 2012
I just bought a Cisco Linksys E900 wireless router. Can someone explain to me why the router (192.168.1.1 on my case) has ports 1990/tcp and 5916/tcp open on the LAN?? I cannot find a way to close those ports.
[code]...
Every client on the LAN (wired and wireless) can connect to those ports on the router. I do not want that to happen. It is unncessary and it is just not secure. I only want the router to have port 443 open on the LAN for the web mgmt interface. I do not want any other unncessary port open.
View 4 Replies
View Related
Feb 9, 2010
I have noticed that in my router log that the router opes a port automatically without any human interaction and after some the time router closes the port again.Here is the log file of my router that opens the port and close it after a couple of hours.
LOG------------------------------
Tue, 2010-02-09 10:02:16 - AddPortMapping: external NULL:3658 to 10.1.1.253:3658 protocol UDP for: 10.1.1.253:3658 to 3658 (UDP) with timeout:0Tue, 2010-02-09 10:02:16 - no permission rule matched : accept by default (n_perms=0)Tue, 2010-02-09 10:02:16 - redirecting port 3658 to 10.1.1.253:3658 protocol UDP for: 10.1.1.253:3658 to 3658 (UDP)Tue, 2010-02-09 10:02:16 - creating pass rule to 10.1.1.253:3658 protocol UDP for: 10.1.1.253:3658 to 3658 (UDP)
.....
Tue, 2010-02-09 12:52:59 - DeletePortMapping: external port: 3658, protocol: UDPTue, 2010-02-09 12:52:59 - removing redirect rule port 3658 UDPTue, 2010-02-09 12:52:59 - Trying to delete rules at index 0
View 6 Replies
View Related
Aug 31, 2012
The only thing hat worked for me was to update the vga driver. Restart the computer and ready to watch everything you want in your tv.
View 1 Replies
View Related
Jul 3, 2012
wireless works on other household computer, but not the Sony Vaio
View 1 Replies
View Related
Apr 9, 2012
how to re-connect my home wireless signal to my computer. The wireless signal is strong and the other computers in my house will connect with no issues. My computer connected with no problems to my wireless signal at work. I am running Windows 7 Home Premium on a Lenovo Idea Pad Win7 PC. The computer was connecting yesterday and then was shut down. The next time I got on, ,it wouldn't connect. I've tried re-establishing the network as a new network, but it says the network already exists. The profile is the same as our other computers and nothing has been changed there. When I disconnect from the wireless signal and ask to re-connect it says that the it is trying to connect, but can't make the connection. I'm looking for any way to re-build the profile so it will connect and work again.
View 9 Replies
View Related
Jan 18, 2011
My desktop computer doesn't have a wireless card in it. i also have a laptop which does have a wireless card. I was wondering if there is a way i can take the wireless connection and re-transmit it to the desktop through ethernet. I have a 5-port switch. I don't really know much about networking. but i am knowledgeable in computers. laptop has windows 7 on it. i really would prefer to not buy a wireless card for the desktop.
View 2 Replies
View Related
Jul 18, 2011
I have a computer that is directly connected to my internet broadband service via my router and modem. From that computer, by use of a router (of course), I have a wireless connection to another desktop computer in my home, about 90 feet away.From that remote wireless internet broadband connection, I'd like to connect to yet a third computer. That third computer will be 200 more feet away. I have a direct Cat5 wire from the wireless computer desktop to that point 200 feet away. I'm thinking of adding a computer at that point.So, that raises my question: Can a computer receiving a wireless signal, then relay or transmit that signal to another computer that is "hard wired" to it via a Cat5 wire?
View 8 Replies
View Related
Nov 14, 2011
I have Clear service but there is one area that I cannot get a signal and need the network security key. I have windows 7, where do I find this security key?
View 2 Replies
View Related
Apr 6, 2011
I have a an HP Pavilion dv6000t notebook running Windows Vista.I have a wireless router at home and connect to the wireless signal using both this computer and my other computer that I use for work. Yesterday, out of the blue, my laptop stopped connecting to my home wireless signal.It detects the signal, but when I click on it to connect (something I shouldn't have to do, as it is configured to connect automatically), I get a message saying that it couldn't connect and suggests that the signal strength is low.I know that the signal strength is fine as I am connected just fine on my work computer.I can plug my laptop into the router using a cable and it connects just fine that way, so the only problem is with the wireless signal. I have restarted the computer, modem, and router, to no avail.
View 3 Replies
View Related
Jun 24, 2012
So i have AT&T dsl internet. but whenever i connect my computer wirelessly to the modem and get on the internet it repeatedly loses dsl connection every some odd minutes. the dsl light on my modem turns off, then blinks red, then fixes itself for five or so minutes until the cycle restarts. ive tried 2 wireless usb adapter and 1 internal wireless card. none have worked at all. but if its wired with an ethernet cord it works fine. we also have 2 other laptops that connect wirelessly and work fine. i dont understand what would cause this solely on my computer. ive also had AT&T come to my house and look at it and they said its fine, the issue is somewhere in my computer messing with the modem.
View 1 Replies
View Related
Oct 13, 2012
change the network icon to the icon that shous the list of networks available with the strength bars
View 1 Replies
View Related
May 14, 2013
Region : UnitedStates
Model : TL-WR841N
Hardware Version : V8
ISP : ATT
I get this new router TL-WR841N from amazon.com, I get no signal/internet connection on my computer when I install/connect the router using the installation min CD (same procedure at listed here: url...The DSL connection is good, since I get internet connection when I connect my modem directly (without the router) to my computer. My modem is the old Siemens SpeedStream 4100 with IP Address of 192.168.0.1 from ATT.Is my router deficit ?
View 2 Replies
View Related
Jan 31, 2012
How can I Block the port 80 on Windows XP?
View 6 Replies
View Related
Apr 5, 2011
I opened a computer in other network via remote desktop(because I forwarded port in router)....and tried to access other computers in the network via remote desktop again from that computer but after I done, I don't know how to close the secondary remote desktop. There was one close button on the top, but if "close" it, whole rdp connection was closed. The secondary rdp connection is still open in the computer.
View 1 Replies
View Related
May 3, 2011
I've been trying to set up a customers security camera's for remote viewing. He has a HP running Vista, a netgear grt614 vs10 router, and a static IP address through Verizon. My problem is this. I set up port forwarding for port 80. All seems to work well sometimes and I can connect to his DVR no problem. Then other times I can't connect at all. I'll run a port checker and it will tell me port 80 is closed. Is it possible that Verizon will off and on block inbound port 80? I seem to only be able to connect during buisness hours. Is it possible that his PC needs to be on for the port to be open. The DVR is the server which is always on and the router is always on. I don't know why the computer would have to be on.
View 6 Replies
View Related
Jan 21, 2013
I currently have a d-link DIR-615E3 with the latest dd-wrt firmware (v24 from 2010-12-13). Everything seems to be ok when I boot up the router - with factory settings and unsecured wireless, I have an internet connection. When I enter the GUI, create a router username/password, everything is still fine. Then, when I create a wireless security password (WPA2 personal) I lose internet connection, and the only way to get it back is to do a hard reset of the router. This also happens if I change any setting within the ddwrt interface, not just the wireless settings. (I also have a linksys WRT54GL with ddwrt with absolutely no problems) My cable modem is a motorola surfboard SB5101U, ISP is comcast cable, running windows 7.
View 6 Replies
View Related
Dec 24, 2012
i want to know that how long a tcp should wait for close the connection.
View 3 Replies
View Related
Jul 17, 2002
Network was:
AT&T Broadband ISP
LanCity LC-PET3 cable modem (non DOCSIS)
Linsys 4 port hub
2 Win98SE PCs
All worked fine
New network is: Same as above, with a Linksys 1 port router (BFSR11) between the cable modem and the hub.
Router is configured to be a DHCP server (default configuration).
I assigned the router a custom WAN side MAC to match one of my two PCs to avoid having to call AT&T to get things running.
Results: Everything runs perfectly fine initially, but after leaving and coming back to either system (left on, in standby) after quite a while (going to work / bed), the network connection is dead.
WINIPCFG still reports the same IP, but seems to hang forever if I attempt to release / renew. The router's is unreachable for configuration / status (it's still on the default IP of 192.168.1.1) Pressing the reset button on the back of the router restores the internet connection (quickly too - I'm back online in about 15 seconds).
Entering standby manually and coming back out again after just a couple minutes does not affect the internet connection - it seems to only occur when I'm off for an extended period of time. I have no had the time to determine what the period of time is, and if it is a fixed time since DHCP lease / initial startup, or if it is a fixed amount of inactivity time (or maybe even not a fixed amount of time at all).
View 7 Replies
View Related
Nov 12, 2012
I boot up my computer. I close it over. come back later. open it. Computer will connect but with the small yellow triangle. Thing is though, it's only my computer that ever has issues with my internet connection. My sisters laptop has never had an issue with out internet. Yet my laptop is able to connect to the neighbors internet fine. The solution to my problem almost all of the time is to simply reboot my computer, which solves the problem(most of the time). But i'm getting so sick of having to do it. The other times when a reboot doesn't work I have to manually reset the internet. As i'm typing this I'm on my neighbors internet. my sister is connected fine to our internet but my laptop simply won't work with it so i'll have to reset it when i'm finished this Some useful information might be that this problem only started happening ever since my computer got wiped.I've tried updating the drivers but apparently they're up to date.
View 5 Replies
View Related
Oct 28, 2011
When restarting my PC after a short power failure the D-Link connection wizard autostarts trying to connect to my wlan. After a short while I have a connection and is able to access the internet. The connection wizard, however does not register that a connection has been established and continues to attempt to connect for two minutes, then shuts down and immediately starts for another two-minute try....and so on. If I shut it down it just pops up again.This has never occured before. I run Windows 7 on an HP with an AMD processor.
View 3 Replies
View Related
Sep 24, 2011
I have a Compaq Presario V2000 running Windows XP and whenever i close the lid of the laptop the wireless disconnects.
I have all of my power settings set to NOTHING. I have set the adapter, Minimum Power Consumption disabled, same with the Power Save Mode.
View 6 Replies
View Related
Feb 14, 2013
I'm using Cisco AnyConnect VPN Client v2.4.1012 running on Windows 7/64 to connect to a client's network environment. Is there any method to the way that the client forces my Firefox and IE browser windows to close?
View 3 Replies
View Related
Jun 19, 2011
Using Vista Home Premium I've got a D-Link Dir628 router equipped with a USB printer port. All is well when it is working. However, at irregular intervals, the router and the printer do not communicate. The only way I can restore communication is to toggle the power on the router, then all is well until the next time this happens.
View 1 Replies
View Related
Nov 3, 2012
My laptop loses connection to the router.... constantly. When it disconnects I check my available networks and the laptop will not pick up any... neighbors or my own, I refresh they show up ...I have my network set as the preferred so it will always attempt to reconnect when available; Sometimes it starts to reconnect then drops off and cannot see available networks again! If I am able to reconnect... Sometimes I don't even have time to refresh my browser before it disconnects again; however sometimes I stay connected for hours at a time, other times/days just can't stay connected very long and becomes so frustrating that I just shut down the laptop and say "Fahgetaboutit"
I thought it was the network driver and a intel has an update(even though my LT doesn't show that I need it), I downloaded the update first knowing that I would be with out internet service after removing the old driver software but the new software installation always gives an error that it cannot install with older version present even after I'm sure I've removed it ... Not sure what to do... I ran cmd: ipconfig /all>network.txt&network.txt and here is the result of that straight from the activated notepad:
Windows IP Configuration
Host Name . . . . . . . . . . . . : VAIO-PC
Primary Dns Suffix . . . . . . . :[code].....
View 14 Replies
View Related