Linksys Cable / DSL :: WAG320N - Router Opens The Port And Close It After A Couple Of Hours?
Feb 9, 2010
I have noticed that in my router log that the router opes a port automatically without any human interaction and after some the time router closes the port again.Here is the log file of my router that opens the port and close it after a couple of hours.
LOG------------------------------
Tue, 2010-02-09 10:02:16 - AddPortMapping: external NULL:3658 to 10.1.1.253:3658 protocol UDP for: 10.1.1.253:3658 to 3658 (UDP) with timeout:0Tue, 2010-02-09 10:02:16 - no permission rule matched : accept by default (n_perms=0)Tue, 2010-02-09 10:02:16 - redirecting port 3658 to 10.1.1.253:3658 protocol UDP for: 10.1.1.253:3658 to 3658 (UDP)Tue, 2010-02-09 10:02:16 - creating pass rule to 10.1.1.253:3658 protocol UDP for: 10.1.1.253:3658 to 3658 (UDP)
.....
Tue, 2010-02-09 12:52:59 - DeletePortMapping: external port: 3658, protocol: UDPTue, 2010-02-09 12:52:59 - removing redirect rule port 3658 UDPTue, 2010-02-09 12:52:59 - Trying to delete rules at index 0
View 6 Replies
ADVERTISEMENT
Jan 1, 2011
I have a problem with my wag120n and iphone or ipad or macbook.The connection works well for about 1-2 hours then stops.so with macbook i have to disable airport and connect to the network again with iPad or iPhone i have to turn-off and REturn-on the wifi.I have already changed the wireless channel but this didn't work form me.
View 5 Replies
View Related
Mar 12, 2011
I bought my new router WAG320N two weeks ago and each morning after 10 hours operation I loose my internet connectivity I can't even remote into the router and press the connect button to connect to the internet again .I have to power cycle the modem to be able to connect to the internet again .? I though this may be ISP related put my old adsl router plugged it in and ran for 2 days no disconnection.
View 1 Replies
View Related
Dec 4, 2012
I have a Linsys E3200 router for almost a year. It's been working fine until recently. It kept losing internet connection every a couple hours or even shorter. I have to power cycle the router in order to make it to work. However, sometimes that won't work either. I also tried to restore the router to the factory default but that doesn't seem to work.
I have updated the router with the latest firmware (1.04). I am using a cable connection and it never gives me any problem if I just connect my computer to it. I also test my network with another old netgear router that works just fine.
View 9 Replies
View Related
Sep 19, 2012
I have an issue with my current network where every couple of hours I will lose my connectivity and it will not come back unless I do a power cycle on my router/modem. I originally thought the issue was with my router, however I'm beginning to think it's an issue involving the modem. I've tried two different routers and this happens on both. My main router is a D-Link WBR-1310 (crap I know but it was free) and has lasted for years, and my modem is a Toshiba PCX2500 from Time Warner Cable. The second router I used to test this was an older Linksys BEFW11S4. I was going to replace my router, but when I saw that both of them reset after a few hours (today was only 5, last night it was connected for over 8 hours as I slept). I ran an IPCONFIG /ALL when I was connected with internet and when I was connected without and the only three changes were: [code]
View 2 Replies
View Related
Dec 5, 2011
I have some hardware on my internal network which I want to send udp packets. I can connect using telnet to it prooving that TCP and port forward works but when I try to send a UDP packet externally it fails.I can however send the same packet internally and port forwarding works fine.My router is Linksys by Cisco WAG320n.
View 2 Replies
View Related
Mar 4, 2011
I'm trying to open some ports for my webserver, I've configured the static IP and forwarded port 80 to my server's IP and I checked the port on canyouseeme.org and it says it's closed. I've tried multiple ports (21, 22, 7878 whatever) and all do the same thing.
So my next step was to try DMZ on the server's IP .. still no happiness .. ports stay closed. I checked this on multiple computers and it still won't open any ports for any machines on my network.
Updated to the latest firmware .. didn't make a difference. My ISP doesn't block any ports (didn't have any issues on my old router.
View 1 Replies
View Related
Apr 4, 2011
Got BT Infinity installed today, thought I would ditch the Home-hub 3 and go back to my tried and tested WAG320N. Got it configured, set the first ethernet port to WAN and got a connection.Ran speed test.net and comes out at 26Mbit.using the Home-hub 3.0 I get 37.5MBit.
View 4 Replies
View Related
Oct 14, 2011
can i connect 2 hard disk to usb port of my WAG320N or one hard disk and one printer?
View 1 Replies
View Related
Jul 9, 2011
I have recently purchased a Linksys WAG320N (firmware V1.00.12) to replace my old ZyXEL P-660H-D1.I've managed to set it up roughly the same in terms of the ports I want open and port forwarding, with one exception: I can enable a port to be forwarded to an IP address on my network, but I can't find anywhere to set it so that the port is only allowed from a specific IP address outside of the network, e.g.
Accept port [some number] from [some Internet address] into 192.168.1.2 but reject attempts from others.I thought it might be in Access Restrictions but that only covers internal IP addresses.
View 1 Replies
View Related
Feb 16, 2011
i am trying to get my router to change ports for certain tasks for eg FTP Port 21 i dont want to use 21 and telnet Port 23 i dont want to use 23 ,is there a way of routing ports so that i can get port 21 say to route to port 786 instead so i can ftp from port 786 and so and and so forth
View 3 Replies
View Related
Mar 15, 2012
So finally that my e4200 is capable of disabling wps i run in to another question.
how to close ports 139 445 ? these are open by default and i didnt figure out how to close them, in browser setup..
and YES port 139 IS a security issue. people denying this, are the same, that denied any vulnearibilties to wps.
View 1 Replies
View Related
Jun 29, 2012
I have a Linksys WAG320N wireless N router which provides wireless coverage to only a part of my apartment. I'm trying to extend the wireless coverage by using an Apple Airport Express (1st Gen). The only way this would make sense would be to extend wirelessly.
1) is this technically possible? I had assumed so when buying the Airport Express
2) Do I have to change some settings inside my WAG320N to make it "Extensible" ?
View 2 Replies
View Related
Feb 10, 2011
I need to connect 4 pc together and to the gateway (only one pc has wifi). i would know if it's possible to use one device like a router where i can wired the 4pc to put them in lan and use also this router to connect all the client to one gateway WAG320N.
View 3 Replies
View Related
Dec 22, 2011
My WAG320N has developed a fault where by after 1, 2, maybe 3 clicks on the web interface and the router reboots. The browser can no longer connect until it is closed and reopened (firefox). Firmware is: v1.00.12
Interestingly, if I use a different browser it doesn't seem to reboot and I can click away for ever. However, firefox reproduces the problem every time. FIrefox version is 7.0.1
View 2 Replies
View Related
Aug 6, 2012
The Port 80 port fowarding stops functioning after a few hours and requires the router to be rebooted to start forwarding again. The firmeware is the latest 1.0.04 Build 7. I require it to operate reliably for many days without intervention. I assume that it is a port forwarding problem because I can access the IP on my network from within my network even when I can't access it from outside my network. I am using the correct IP addresses as it sometimes works OK. A characteristic is that when I can't access the page it loads as completely blank white with no error message.
View 2 Replies
View Related
Mar 14, 2012
I've recently bought a wag320n modem router to replace the two wire device fitted to my bt business broadband. This router supports a guest network..
View 1 Replies
View Related
Feb 6, 2012
I just started using NMAP and found that port 139 is open on my router. Browsing through the router's settings I don't see any option for closing ports or disabling NetBios.... how should I go about securing this port?
Here is my router. [URL]
View 4 Replies
View Related
Jun 4, 2010
some reference material about configuring my WAG320N to use my cable modem via Ethernet port 1. I've seen it mentioned that's its possible, however I've been unable to sort it out myself.
And before you ask, I've brought the DSL router as I'm moving in the next 12 months and my new base will not have access to cable internet and I'll be reverting back to DSL.
View 8 Replies
View Related
Jun 28, 2012
I have a WAG54G2 working fine for more than 2 years now. It has the initial firmware version 1.00.10
Recently I mode it from my home to my store, where I have a already working CCTV setup. Initially the router did not work, but once the service provider removed the mac-id binding (with my previous ADSL2+ router) the WAG54G2 was connecting on DSL. However it never got a DNS value. Currently I am using it with a fixed DNS.
After a few days of working I noticed that my remote viewing for the CCTV was not working. On checking the router settings I saw that the router had defaulted to no settings at all. Changing it back to PPPoE did not work since the page would not render completely. Resetting to Factory settings also did not work. However simply switching off the router and restarting it worked. I let it go then. The same thing happened again within a day or two. Each time restarted the router seemed to solve the problem, however temporarily.
I have the SPI firewall enabled also I have application port forwarding set for HTML port 80 forwarding to say port 1234.
View 2 Replies
View Related
Jul 17, 2011
I have a WAG320n and I wish to use it as a modem only so that I can use an Airport Extreme as my wireless router. how to configure the WAG320n so that it can be used in this configuration?
View 1 Replies
View Related
Mar 2, 2011
how to configure or set up VPN on WAG320N?
View 3 Replies
View Related
Aug 27, 2012
I have an intermittent issue with a new WAG320N.Device is new (installed for 1 month now) and is running the latest firmware "out of the box".
Device was confirmed as working (recommended) via the ISP, as it uses a Broadcom chipset, so it works "more reliably" with the ISP's hardware which uses the same chipset.
Setup was painless and the router synced up fine and has been operating for a few weeks. However, twice in the past week the router has become unresponsive to ping over the LAN. Furthermore, the device's lights indicate everything is OK, however I have to reset the router (power cycle) and then it returns to normal.
WIFI is OFF. LAN IP is set manually, DHCP is OFF. The router is plugged into it's own UPS.
View 1 Replies
View Related
Mar 6, 2012
How to configure settings for router E4200I live in Finland and bought new Cisco Linksys WAG320n router modem as I am experienced Cisco user. However after spending several hours and setups on the WAG320n router I cannot get it to connect on the ISP ADSL line.
RFC2684 Bridged
LLC/SNAP
g.dmt or ADSL2+
VPI 0
VCI 100
But once I setup these or acutally any other setting I cannot get the router to connect. With the right settings I can get the DSL PVC status up and connected but the ModemRouter cannot connect and retrieve IP-address from ISP.
View 7 Replies
View Related
Sep 4, 2012
I'm trying to play some online games and my WAG320N does not forward ports, upnp does not function and to top it off DMZ wont even work (not a software firewall issue either). I have the latest firmware (and honestly the stock firmware is terrible).
Am I out of luck or is there something I can do to fix this? I sure as hell will be steering clear of linksys products after this.
View 1 Replies
View Related
May 16, 2010
i need to downgrade my WAG320N and don't find old firmware 1.00.08 AnnexA
View 9 Replies
View Related
Mar 10, 2011
This WAG320N Router can get really slow after a while use which is really frustrating for me since I am a gamer. Power cycling it SOMETIMES does the trick but it will still get slow. It has been slow just now and over here it is midnight so the internet peak should be down and my internet should be faster but its now.
View 2 Replies
View Related
Nov 8, 2012
I have the WAG320N. I know if my router is updated to fix the bug of the WPS?There is an update? Which is the date scheduled for release? The vulnerability of my network has been compromised yesterday because of this bug, so either the update is released soon or I'll have to switch to another product of some companies more serious
View 3 Replies
View Related
Feb 4, 2011
Transferring a file between a wired Win 7 machine and a wireless Snow Leopard mac seems to top out at 32Mbps.I've seen over 60Mbps on this laptop using N networks before, and when I wire the laptop I get a more respectable 240Mbps (presumably maxing out the server's disk I/O rate), so I'd say the issue is the router.
Things I have already tried:updating the firmware to 1.00.125Ghz modeFinding the least crowded 2.4Ghz channelswide channelsSetting network mode to N-onlySetting the transmission rate to 108Mbpschanging the beacon interval to 50, the frag threshold to 2201 and the RTS threshold to 2202
View 2 Replies
View Related
Jan 11, 2010
I have bought a WAG320 & ever since I've had it the ADSL line keeps dropping every few hours. The LAN network is fine & I have 7 computers connected to the router wirelessly. When I press the re-set button on the back of the router everything is fine for a few hours then it starts doing it again?
View 9 Replies
View Related
Jan 26, 2010
I have only purchased this modem a few days ago (upgraded from a working Netgear DGN2000 for Gigabit).... it's solid most the time except for once a day when it needs to be reset.
One morning I accessed a single website, only to find the next wouldn't come up. (approx 7:30am) Lastnight the net was working fine at 11:30pm.... Thismorning I woke up, checked my download manager to find that at 2:30am all queued downloads failed, so the ADSL dropped sometime inbetween then.
The LAN and Wifi still work fine, when I go into the settings and click "reconnect" nothing happens. I need to turn the modem off for a min before it works ok. There is no newer firmware as of yet to try.
View 5 Replies
View Related
Jan 14, 2012
I do not have a "storage" tab in my setup screen. I have Setup, Security, Wireless, etc. According to its manual there must be a Storage tab between security and wireless. Mine doesn't have it. USB drive is connected and I see "mywag320n" on the network but I can't access it because it requires login and password (which I guess I must set up from Storage tab )
View 8 Replies
View Related
Jul 9, 2011
I connected my Western Digital Studio II 2TB external harddrive which is formatted NTFS. I can access the drive and read it. But I can't write it. It says I do not have rights. I tried to get to be the owner of the device but it gave some kind of error.
View 2 Replies
View Related
