Aspire 5315 - Wireless Is Sending But Not Receiving Packets?
Jan 10, 2012
i have an acer aspire 5315 and im running windows vista home basic, My wireless has had no issues at all until i came to oklahoma yesterday and my internet will not connect to my dads wireless, but at my moms it had no issue, and at the airport i connected to there wifi with no issues also, is there some kind of setting that gets changed when you connect to the internet in the airports that wouldnt allow you to get on your internet at home?
One Day the internet is fine the next day The Internet Stopped working. The problem is my pc is sending packets but not receiving any i though it was a bug or something so i restarted my pc after i restarted my pc the internet was working fine until a couple of minutes passed it stopped receiving packets again.i tried resetting the modem but nothing worked.I tried winsock fix or resetting TCP/IP and stuff but nothing workscause its starting to frustrate me.
Our computer is sending but not receiving packets. We've tried 3 different wi-fi adapters, and that wasn't the problem. We have no idea what's wrong? It won't pick up any wireless signals by the way, and it works fine while connected via Ethernet.
I have a laptop computer with windows 7 and im having trouble connecting to my wireless internet. It says that im receiving packets but not sending them. I have tried to troubleshoot the problem and it says that the default gateway is not available. I am not sure what is happening with it, it started having problems while at a starbucks, and now the wireless and the LAN is not working on it.
I have an Acer Aspire 5315. I recently reformatted the laptop and it now says I have no wireless adapter installed or configured. I'm assuming it's just a driver problem but when I went to find the wireless drivers for it there were a lot. I tried two different drivers for it with no success.
We have an Acer Aspire 5315 running a Broadcom 590x 10/100 Wireless card.The card was working wirelessly & with a direct connection. We upgraded the Hard Drive and the system now has Windows Vista on it.The computer will connect to the network via cable but it will no longer connect wirelessly.
I have a Aspire 5315-2153 Laptop with windows Vista Home.I cannot connect to my wireless anymore. When tries it says Connecting to 2wire296 please wait -- Then it says Conection to WLAN Failed.I am able to connect with my ethernet wire connection just not wireless.I did IPCONFIG/ALL and here what came up.
Microsoft Windows [Version 6.0.6002] Copyright (c) 2006 Microsoft Corporation. All rights reserved. C:Windowssystem32>ipconfig/all[code].....
My partners Aspire 5315 laptop will not connect to our newly installed Virgin wifi. Virgin have tried to access while hard wired and can see no issue with wifi, my laptop runs without issue Samsung Q35.When trying to connect Windows Network Diagnostics the message that comes up is;Cannot communicate with primary DNS Server(188.8.131.52).Network diagnostics pinged the remote host but did not receive a response.We can take her Aspire laptop out and connect to friends WIFI (Virgin, BT etc.) without any issues but cannot do this on our own wifi at home. Every diagnostic thats been run shows no issues with anything. [code] When I hard wire the internet through the ethrnet connection I have no issues but kinda defeats the purpose of WIFI for my partner.
I had a customer call me and her desktop (wired connection only) is sending and receiving packets but she still cannot connect to the internet. Customer has tried power cycling her modem, router and desktop with no avail. Her system is running XP.
I'm using Cisco 2100 cable modem. It worked fine until some time later where the Data Send & Receive LED's stopped blinking. A man came to check if the cable was the problem by replacing it, but it wasn't. He claims it might be related to the laptop. I have tried several times restarting it. (I'm using mobile broadband) I would really like fast rather than slow internet ( I was limited so now it's slow but free)
Cisco ASA 5510. Between 5 to 10 minutes of reseting the asa traffic stop accessing outside ip addresses. Ping from console fails to ISP router IP. Ping to google name server failes. I have reset to factory default only setting up nic and natting and it still happens.
I have a home network that does not connect to the internet, but which I use to play games on, or did before this issue happened by.For years my PC's and friends ones had been able to connect into the network with little or no problems, but a few months ago my tower PC just stopped picking anybody or anything up on the network and I have tried tons of different resolutions to solve this.Anyway, the other day I bought a new HD and installed XP SP3 again on it, and for about fifteen minutes I could connect to my Vista Laptop and share files and play games, then it stopped.Next day the same again and off and on till now when its been down for the last week.I have also now bought a new network card - no difference - and disabled the on board network card through the BIOS - no difference.I have done a Winsock repair, replaced automatic IP addresses with manual ones, and countless other remedies which have not solved diddly.
I have a Asus EEE PC 900 laptop running Windows XP Home. I DO NOT use a modem or router. I connect wireless to someones network (which of course i dont know who it is or how far it is from me) I connect to a Linksys unsecured network. I get good to very good (some times excellent connection from it) The name of my adapter is: Atheros AR5007EG wireless network adapter.Two days ago i was on the internet, and all of a sudden i Lost service ( usually when this happens i wait it out and it comes back)But it hasn't.So I'm checking through my settings and i noticed that im sending way more network packets than receiving. Last i checked it was around 40,000 sent and 5 received. So I wait and wait and wait and the most packets it would go up to is 90 while as sending is still in the thousands.It also says im successfully connected with good to very good connection status (but yet i cannot surf the web because i do not have enough network packets)
I tried different locations in my house (that didnt work)I uninstall and reinstalled my network adaptor (that didnt work)I turned off and on the wireless switch(that didn't work). Im wondering if this has something to do with my laptop or the other persons network? how can I increase the received network packets?
I cant connect to the internet. When I use other networks its fine. Also all the computers in this network im trying to connect to can connect and work perfect. I know i have the WPA code right. Its sending but not recieving any packages. The IP address 169.254.140.90 so i know its not working right.
I recently moved house and got a new ISP. I followed their instructions and set up my broadband. connection is working fine through the LAN, and I can connect to the wifi on my phone but when I try to connect my laptop via wifi it says it's connected but I can't access the internet and it looks like it's sending packets but not receiving.
Everything is fine except that whenever I am receiving packets, there is a corresponding upstream of packets which is subsequently slowing my download speed.I should be getting ~600kbps, but I am instead getting ~200kbps.The ratio of packets sent/received is almost 1:1.5, and of course when your upload bandwidth is being maxed it starts cutting your download speed.
Alright, so we have about six computers on average all on at the same time, working just fine, last night one of the laptops just, stopped working, saying there is no internet access, With every attempt it doesn't send any information. When I disconnect it from the wireless, then reconnect it, it immediately receives packets but won't send any.
So this is somewhat of a strange issue. I have a program called PeerGuardian 2 and it allows me to simplistically see the packets being sent to and from devices on my home network. It's showing that my computer is sending packets to random IP addresses, some of them reoccur, on a massive range of ports all going in order.
(example) From 192.168.1.253:6812 - To 184.108.40.206:80 From 192.168.1.253:6813 - To 220.127.116.11:80 From 192.168.1.253:6814 - To 18.104.22.168:80 From 192.168.1.253:6815 - To 22.214.171.124:80 From 192.168.1.253:6816 - To 126.96.36.199:80 From 192.168.1.253:6817 - To 188.8.131.52:80
This happens in spurts and it usually sends 20-40 to varying IP addresses in a matter of a few seconds. I asked my ISP if they understood what this was and it stumped the technician I spoke with. I also have run multiple virus/malware scans and everything comes up clean.
I can't connect to the internet. When I double click Local Area Network under Network connections it says it has both sent and received packets. It is set to automatically acquire an ip address. The computer is connected to a router. I can ping 192.168.1.1 but when I try to reach my router's settings it says page can't be loaded. I tried to hook the computer up directly to the modem and connect that way. It said it was connected and it was sending packets but I still couldn't do anything. I've turned off the windows firewall. The computer is Windows XP SP1
I can't connect to the internet. When I double click Local Area Network under Network connections it says it has both sent and received packets. It is set to automatically acquire an ip address. The computer is connected to a router. I can ping 192.168.1.1 but when I try to reach my router's settings it says page can't be loaded. I tried to hook the computer up directly to the modem and connect that way. It said it was connected and it was sending packets but I still couldn't do anything. I've turned off the windows firewall. The computer is Windows XP SP1.
More info: ip config /all netstat -n ping&tracert 192.168.1.1
Have a Cat 4507 with Supervisor 7-E, setup configuration to send NetFLow information to an external server, everything worked great but after 2 weeks, the exporter is showing zero packets sent and the following error is at the console:
A specific switch port which happens to be part of a 2 switch 3750 Switch Stack is seeing multiple CDP packets from 3 extra switch port interfaces that are not directly connected. Noteworthy is that the far end devices have the correct CDP entries and I physically confirmed at least two of those connections that lead to the switch "upstream to the culprit switch". Tricky part is that its production so room for maneuvering is limited. At some point I disabled all Ports save for the real uplink and the problem momentarily disappeared. Re-enable the interfaces problem resurfaces. Is there an explanation, technique to eliminate the culprit with minimal disruption?
I have a computer that is directly connected to my internet broadband service via my router and modem. From that computer, by use of a router (of course), I have a wireless connection to another desktop computer in my home, about 90 feet away.From that remote wireless internet broadband connection, I'd like to connect to yet a third computer. That third computer will be 200 more feet away. I have a direct Cat5 wire from the wireless computer desktop to that point 200 feet away. I'm thinking of adding a computer at that point.So, that raises my question: Can a computer receiving a wireless signal, then relay or transmit that signal to another computer that is "hard wired" to it via a Cat5 wire?
I have two number of WLC model 5508 running IOS version 184.108.40.206. And One WLC in DMZ with the same model and IOS version. AP model is 1141. The Two WLCs are integrated with ACS. I have a SSID named EMployee. The DHCP for the users are configured in a seperate DHCP server and i have mapped this DHCP server IP to the interaface Employee.And this interface is mapped to the SSID as well.. But my client is not receiving the DHCP IP. Attached are the debug logs from the client.
My Gateway laptop has stopped sensing wireless signal. It was working just fine a few hours ago, then after I pulled it out of hibernate it stopped sensing the signal. I have switched the button off and on at least 3 times, tried restarting and turning off and starting. Have also tried the Fn-F2 a number of times but still no luck.
Is there a way or software can I use to send messages to all wirelessPCs in my network without doing any configurations or installation on those PC.I've used net send command for that, but is there another way?