Constant Sending And Receiving Bytes
Jul 28, 2011When i look at the network wirless connection status something is constantly sending and receiving Bytes and lots of them.the modem gets warm from all of the activity.
View 6 Replies
ADVERTISEMENT
Receiving Way Too Many Bytes?
Feb 12, 2011For the last 3 weeks or so (right around the time I upgraded to IE8), my computer has been receiving a ridiculous number of bytes compared to what it sends.Within 5-10 minutes of logging on (I still use dialup), a check on the status shows around 100,000 bytes sent and over 2,000,000 received.I've been online for around 40 minutes, and it currently shows 650,000 sent (23% compression rate) and over 5,000,000 received (4% compression rate).Of course, the browser starts lagging and freezing after a while, which I assume is from the large number of bytes being received.
At the same time, there's a noticeable lag when I try to run programs, even when offline. For example,I click on my ISP connection and nothing happens for 5-6 seconds, then the dialog box appears. This is something that's never happened before. I'm running XP Home and no one else has access to my computer.I'm using the standard Windows firewall.I've run my AV and spyware programs multiple times (nothing found), cleaned my temporary files and cookies, even adjusted the FIFO buffers (the last thing I tried was turning the buffers off). I've been running Disk Cleanup everyday (which lags and runs slower than ever before), but it doesn't solve anything.I don't know how to adjust the compression rate for bytes received to see if that works.
Cisco :: Padding Bytes At L2 Layer In Receiving Station
Mar 28, 2013I am blocked with the below doubt for my issue resolution. When a ethernet frame for eg:ARP Packet of minimum length (64 bytes) is received at the end station, will the L2 layer remove both FCS and extra padding bytes(18 padding bytes for ARP)? Or removal of the padding bytes is dependent on the implementation?
View 2 Replies View RelatedSending But Not Receiving Packets?
Jun 26, 2011One Day the internet is fine the next day The Internet Stopped working. The problem is my pc is sending packets but not receiving any i though it was a bug or something so i restarted my pc after i restarted my pc the internet was working fine until a couple of minutes passed it stopped receiving packets again.i tried resetting the modem but nothing worked.I tried winsock fix or resetting TCP/IP and stuff but nothing workscause its starting to frustrate me.
View 14 Replies View RelatedSending But Not Receiving Packets
Sep 26, 2011Our computer is sending but not receiving packets. We've tried 3 different wi-fi adapters, and that wasn't the problem. We have no idea what's wrong? It won't pick up any wireless signals by the way, and it works fine while connected via Ethernet.
View 5 Replies View RelatedLAN Sending 0 Packet But Receiving Many Unwanted?
May 27, 2011my local area connection is sending 0 packet and receiving unwanted packet
View 1 Replies View RelatedDesktop Sending And Receiving But Still No Internet?
Apr 18, 2013I had a customer call me and her desktop (wired connection only) is sending and receiving packets but she still cannot connect to the internet. Customer has tried power cycling her modem, router and desktop with no avail. Her system is running XP.
View 13 Replies View RelatedDefault Gateway Not Available - Receiving But Not Sending Packets?
Feb 14, 2011I have a laptop computer with windows 7 and im having trouble connecting to my wireless internet. It says that im receiving packets but not sending them. I have tried to troubleshoot the problem and it says that the default gateway is not available. I am not sure what is happening with it, it started having problems while at a starbucks, and now the wireless and the LAN is not working on it.
View 13 Replies View RelatedReceiving More Packets Than Sending In Vista Home?
Sep 27, 2012Receiving more packets than sending in Vista Home?
View 1 Replies View RelatedAspire 5315 - Wireless Is Sending But Not Receiving Packets?
Jan 10, 2012i have an acer aspire 5315 and im running windows vista home basic, My wireless has had no issues at all until i came to oklahoma yesterday and my internet will not connect to my dads wireless, but at my moms it had no issue, and at the airport i connected to there wifi with no issues also, is there some kind of setting that gets changed when you connect to the internet in the airports that wouldnt allow you to get on your internet at home?
View 19 Replies View RelatedRouters / Switches :: Computer Is Sending Packets But Not Receiving?
Mar 8, 2011Few systems on my LAN stops recieving packets but sending, this happened after i changed my switch, i run xp professional. i have tested cables, NICs,etc.
View 1 Replies View RelatedCisco 2100 - Data Not Sending Or Receiving From Modem?
Oct 26, 2012I'm using Cisco 2100 cable modem. It worked fine until some time later where the Data Send & Receive LED's stopped blinking. A man came to check if the cable was the problem by replacing it, but it wasn't. He claims it might be related to the laptop. I have tried several times restarting it. (I'm using mobile broadband) I would really like fast rather than slow internet ( I was limited so now it's slow but free)
View 14 Replies View RelatedWireless :: Acer Netbook Sending Activity Packets But Not Receiving
Feb 3, 2012My acer net-book is sending activity packets but not receiving. it is sending 800 activity packets and receive only 2
View 1 Replies View RelatedCisco WAN :: ASA 5510 - Outside Interface Stops Sending And Receiving Traffic
Aug 8, 2012Cisco ASA 5510. Between 5 to 10 minutes of reseting the asa traffic stop accessing outside ip addresses. Ping from console fails to ISP router IP. Ping to google name server failes. I have reset to factory default only setting up nic and natting and it still happens.
View 2 Replies View Related0 Bytes Of Free Space On CD-ROM?
Oct 22, 2012Why do i have 0 bytes of free space on my cd rom??
View 1 Replies View RelatedCisco VPN :: ASA 5510 Don't Have Bytes Rx
Jan 2, 2013I have a problem with my vpn between two ASAs, I review the running config of two devices, but I couldnt see anything out of normal.As you can see in the image the VPN is up, but in the ASA 5510 I don't have Bytes Rx (ZERO), I tried to config again two ASAs but I have the same trouble.
View 19 Replies View RelatedSent And Received Bytes Increasing When Idle?
Jan 20, 2011When i check the status of my Internet Connection I notice that the sent and received bytes keeps increasing. I'm sure there are no downloads taking place that I'm aware of. No torrent clients, no antivirus nothing. I checked my PC for malware but that didn't work. As a result of this, i keep getting high pings in online games and can't even watch videos in youtube anymore. like, some software to monitor all the programs that use the itnernet connection without my knowledge or something??My primary concern is gaming (Call of Duty 4) so I wouldn't mind this idle downloading (whatever it is) as long as the major chunk of my internet connection is directed towards Cod4!
View 5 Replies View RelatedBroadband :: Bytes Not Increasing In Network
Jun 7, 2012This has been happening of late. When i check the status of my Internet Connection I notice that the sent bytes will be more than 200 and received bytes will be low as 2 to 4
View 1 Replies View RelatedQuestion About Conversion From Bits To Bytes
Nov 16, 2012I used speed test and got 50 mega bits per second. I tried re downloading tf2 and i was getting 80 kilo bytes, and I am using windows 7. Doesn't 8 mega bits equal 1 mega byte?
View 2 Replies View RelatedSent And Received Bytes Keeps On Increasing Even When Idle?
Jan 20, 2011This has been happening of late. When i check the status of my connection, i notice that the "sent" and "received" bytes keeps on increasing when i'm idle. I'm pretty much sure there's no downloading of any sort in progress that I'm aware of. As a result of this, I can't watch videos in Youtube or play online games due to high ping.
View 6 Replies View RelatedCan't Connect To Workgroup Network 0 Bytes Received?
Jan 31, 2012We have a new router (D Link) at offices which is fixed with LAN wall points on different places , we want to use it .I connected computers to the LAN points with regular lan cables , it gives me the alert (connected) but no bytes received .I tried to ipconfig an here's what i got :Windows IP ConfigurationEthernet adapter Local Area Connection 2[CODE]
View 1 Replies View RelatedCisco :: Cannot Increase MTU To Support Extra Four Bytes Of VLAN Tag
Oct 22, 2012We have an EHWIC for a 2900 router. Apparently, this card supports QinQ.. However, there is no usual MTU command. Therefore we cannot increase the MTU to support the extra four-bytes of VLAN tag. We have tried 15.2 and 15.1 code. May be the command is different. I'm about to go and do some digging elsewhere.The card is EHWIC-4ESG.
View 6 Replies View RelatedCisco WAN :: 881 / Memory Allocation Of 65536 Bytes Failed From 0x81F083F4 / Alignment 16
Oct 31, 2011We have a Cisco 881 router, which is crashing. We have seen that the ARP cache fills up so much it causes things to crash, our phones go down.. We dont know why this however IP CEF seems to be doing it, when we disable it goes away however disabling IP CEF causes our L2TP tunnel to become inoperable also. So why does IP CEF cause thousands of AR entries and how can we limit that!? Below is the error, sample of the ARP cache and our config. You will notice we also have a /31 given to us on WAN interface, this was given to us by our service provider. This is really strange I cant find other examples on internet.
The error:
Nov 1 04:21:57.474: %SYS-2-MALLOCFAIL: Memory allocation of 65536 bytes failed from 0x81F083F4, alignment 16
Pool: Processor Free: 55176 Cause: Not enough free memory
Alternate Pool: I/O Free: 2352 Cause: Not enough free memory
[code]....
Cisco :: 5500 - Count Bytes For Some Interesting Traffic Crossing Firewall In It?
Mar 20, 2013I need to count the bytes for some interesting traffic crossing the firewall in ASA 5500. Packet Capture is so far as I need, cause I only need the number of bytes during a long time for about 3 months (source host - destination host)
capture capin type raw-data access-list cap buffer 33554432 interface inside circular-buffer [Capturing - 33553570 bytes]
I need to get only the exactly amount of "33553570 bytes" The pcap file is not needed
Cisco Firewall :: ASA 5520 / Crypto Errors CTM ERROR / Failed To Allocate X Bytes Of Memory
Oct 9, 2012I am currently getting a strange error when trying to use and crypto services on our ASA 5520 (8.0.3)Initially I observed that a connected VPN had dropped.Then when I attempted to use ASDM or SSH I was blocked.
In the end I opened telnet as a test and this was successful. Syslog also shows that traffic is passing as normal.The only obvious error I can see when observing various debug traces is this;
FW02# CTM: rsa session with no priority allocated @ 0xCF1FBBA0
CTM: Session 0xCF1FBBA0 uses a nlite (Nitrox Lite) as its hardware engine
CTM: rsa context allocated for session 0xCF1FBBA0
CTM: rsa session with no priority allocated @ 0xCE7A5EA8
[code]....
Constant Disconnection From Router 2 To 1
Sep 17, 2012I am not good at networking. My friend wanted me to set up his home network.because the modem is unable to supply a good wireless connection to the rest of the household when the door is closed, a second router was needed.I set both routers to run with DHCP as they have many devices that needs to connect to the router for internet. However, a few hours after setting it up, my friend's pc as well as all devices connected to the second router faced issues. The router's interface showed that it does not have connection to the internet. they are still facing this problem until now.
View 7 Replies View RelatedConstant Disconnects From Internet?
Dec 21, 2011I keep getting disconnect from the internet about every 10-15 minutes.I had a tech from cableone come over yesterday he installed all new wiring and a new modem.how can i tell if it's my computer that is the problem or if it's just a service i need to get rid of?
View 8 Replies View RelatedATT DSL - Getting Constant Signal Drops?
Sep 12, 2011I currently live in a fairly-large apartment in Downtown San Francisco and as you can probably imagine, I have ALOT of interference with nearby residential and business wifi's, microwave's, cell-phones and all that jazz.
I currently have the ATT Elite DSL package, which is I believe the 6MBPS(?) package? Anyway, it's the $40 package and I want to say it's either the second or third up from the basic 19.95/month subscription. Here's my problem: ever since I moved into this building, I get signal drops on my ATT all the time--like at least once an hour if not more often. I had a technician check the wiring and he even replaced the router box (they always do) in hopes of improving the situation but so far, no dice.
I have tried switching to different channels after using scanning to see what channels other internet users nearby were using, but I did not see any improvement.The best solution I've been able to come up with is to set my router to be on 802.11B only. For the most part,I have not disconnected but I do feel a certain amount of slow-down or lag compared to my 802.11G settings.Now,I might be paranoid but it certainly does take a good amount of time longer to load up pages and such as compared to previously.The tech suggested I look towards getting an 802.11A/N router, but alas ATT does not support routers of that caliber...not sure why. It's been years and they're still stuck with the 2Wire 2701HG-B model for DSL.
D-Link DIR-615 :: DIR-632 Needs Constant Rebooting?
May 2, 2011About twice a week lately I'm having to reboot my router. All connections don't work. Logs captured don't show any time stamping so not as good as I was hoping but I do have some debug data:
View 1 Replies View RelatedD-Link DIR-655 :: Constant Disconnecting
Apr 8, 2012My router was working fine. Then 1 day I started having slow internet. My ping in games would jump up from ~60 to about 400-800. Did some troubleshooting with my ISP. Seemed like my modem was to blame. So I bought a Netgear one from BestBuy.
Everything was fine. Then 1 day the internet stated disconnecting. None of the computers could see the router in the wireless networks. I found the only way to solve the problem is to unplug the power and plug it back in. Strangely it seems to happen a lot late at night like around 11PM or 12 midnight EST.
Before with my old modem I just had automatic settings and DHCP. With the new modem it wouldn't work so I called DLink and the tech guy walked me through some steps, one of which was changing the ip address from 192.256.0.1 to 10.10.10.1. Whenever I reboot the router after a disconnect the computers say "there was an IP address conflict." Maybe this has something to do with it?
I saw in another topic someone said their router's time was wrong. Mine said it was 2010 so I updated it to automatically sync with ntp1.dlink.com and now it shows 2012. Let's see if it fixes now. My mom's laptop had a similar problem with Skype. For some reason the clock kept resetting to 2000 and Skype would not work (everything else did). When she resets the time to 2012 it starts working again.
Constant Slow Down Of Network Transfer
Aug 19, 2012The setup is Windows 7 64 bit transferring a 10 GB file to a Linux Ubuntu distro. Both have 1Gb NICs and the Switch is also a 1Gb switch.
View 2 Replies View RelatedBelkin Router Constant Disconnect?
Sep 17, 2011I am an unlucky person who still has a belkin router. Not only do i have a belkin router, my PC is also connected via 2 switch boxes all ethernet cabled together in and around the house.
I am unable to forward and ports succesfully because after i have saved the settings i check it with a port checking site and it says they're all closed.
I have also been getting disconnected from my router when its under stress (Most recently playing League of Legends) but my Dad's Pc (Which is only connected to the Belkin) still stays connected and hasn't experienced any disconnections.
My router model is F5D7634-4 v2, DHCP is enabled but only my Dad's PC appears, UPnP is enabled but doesn't seem to work and my fireware is up to date.
I used to have a different router before this one which never had these disconnecting problems.
Constant Wifi Disconnections - 5 Routers
Jul 30, 2011Ive been through 5 routers. All of them, except ONE has had a very annoying problem. The WiFi disconnects like anything randomly. The funny thing: The 4 that disconnect have all been working on 802.11n 300mbps. The 802.11g DG834Gv5 is as solid as a rock, maintaining connection for months on end, no wireless dropouts. Ive tried fiddling with the 4 routers (DGN2200, DG834N, Belkin N1 Vision, and another one ive forgotten), putting them onto 54mbps, which always works perfectley. When its on 145mbps or 300, they disconnect. No pattern, just fall off. When reconnecting, I can see them in the network selection thingy, but it just gives me the error 'Cannot connect to XXXX', only solution is to turn off the wireless radio and turn it back on via router interface.
View 6 Replies View Related