I'm using Cisco 2100 cable modem. It worked fine until some time later where the Data Send & Receive LED's stopped blinking. A man came to check if the cable was the problem by replacing it, but it wasn't. He claims it might be related to the laptop. I have tried several times restarting it. (I'm using mobile broadband) I would really like fast rather than slow internet ( I was limited so now it's slow but free)
View 14 Replies
One Day the internet is fine the next day The Internet Stopped working. The problem is my pc is sending packets but not receiving any i though it was a bug or something so i restarted my pc after i restarted my pc the internet was working fine until a couple of minutes passed it stopped receiving packets again.i tried resetting the modem but nothing worked.I tried winsock fix or resetting TCP/IP and stuff but nothing workscause its starting to frustrate me.
View 14 Replies View RelatedOur computer is sending but not receiving packets. We've tried 3 different wi-fi adapters, and that wasn't the problem. We have no idea what's wrong? It won't pick up any wireless signals by the way, and it works fine while connected via Ethernet.
View 5 Replies View Relatedmy local area connection is sending 0 packet and receiving unwanted packet
View 1 Replies View RelatedI had a customer call me and her desktop (wired connection only) is sending and receiving packets but she still cannot connect to the internet. Customer has tried power cycling her modem, router and desktop with no avail. Her system is running XP.
View 13 Replies View RelatedWhen i look at the network wirless connection status something is constantly sending and receiving Bytes and lots of them.the modem gets warm from all of the activity.
View 6 Replies View RelatedI have a laptop computer with windows 7 and im having trouble connecting to my wireless internet. It says that im receiving packets but not sending them. I have tried to troubleshoot the problem and it says that the default gateway is not available. I am not sure what is happening with it, it started having problems while at a starbucks, and now the wireless and the LAN is not working on it.
View 13 Replies View RelatedReceiving more packets than sending in Vista Home?
View 1 Replies View Relatedi have an acer aspire 5315 and im running windows vista home basic, My wireless has had no issues at all until i came to oklahoma yesterday and my internet will not connect to my dads wireless, but at my moms it had no issue, and at the airport i connected to there wifi with no issues also, is there some kind of setting that gets changed when you connect to the internet in the airports that wouldnt allow you to get on your internet at home?
View 19 Replies View RelatedFew systems on my LAN stops recieving packets but sending, this happened after i changed my switch, i run xp professional. i have tested cables, NICs,etc.
View 1 Replies View RelatedCisco ASA 5510. Between 5 to 10 minutes of reseting the asa traffic stop accessing outside ip addresses. Ping from console fails to ISP router IP. Ping to google name server failes. I have reset to factory default only setting up nic and natting and it still happens.
View 2 Replies View RelatedMy acer net-book is sending activity packets but not receiving. it is sending 800 activity packets and receive only 2
View 1 Replies View Relatedi have a problm in Epson LQ-2090 Dot Matrix Printer that is LAN Not receiving the data's .....Last time the same prblm came so i installed IP Add thn after 10day's again the same prblm repeating..... So can any one tel me the reason y it happen..... But i think LAN Memory power is gone.
View 1 Replies View Relatedhaving recently downloaded a bandwidth monitor widget, i notice that something is sending 1.625kb of data, OVER AND OVER. i am experiencing zero issues with my pc functionality, but am concerned about what is sending data out from my pc.in desperation, i tried a 3rd party firewall, zonealarm. even after installing it, the data continues to be sent. i have looked through my running processes, ending several auto-updaters, closed my browser and anything else i can think of that might use my internet.
View 3 Replies View RelatedWe've got a network consisting out of Cisco 3750 and 2960 units on which STP is enabled. We are trying to get a WAP200 working in this environment. Problem is that the WAP200 is sending out STP data every 2 seconds (checked with Wireshark) wich is causing mayhem on the network. The situation will not settle down to a stable situation.Question:Is there any way in which the STP traffic generated by the WAP200 can be disabled ?
View 2 Replies View RelatedMy setup is as follows:
Linksys E2500 as DHCP client, all default network settings (MTU auto configured to 1500), connected to:
ZTE 831 II ADSL2+ modem in bridged mode
The issue is that whenever any large file is downloaded over HTTP, the download stops after about 4 minutes and never resumes. This results in:
1) HTTP downloads of anything > ~80 MB failing; tried using several browsers and CURL, all with the same results
2) iOS downloads in iTunes timing out
3) YouTube videos stalling every few minutes
Interestingly, Netflix streaming works OK. Perhaps that's because the protocol for Netflix is not a single large download but a bunch of smaller ones, but that's conjecture.
This all occurs over both wireless and wired connections to the E2500.
If I connect my Mac directly to the ZTE modem, I don't have the problem.
I current have a Cisco 2100 Cable modem (192.168.100.1) connected to a Cisco Linksys E2000 (192.168.0.1) that is connected to a Cisco 3550 (192.168.0.10). I would like to relocate the E2000 to another room. This would require me to connect the 2100 and the E2000 through the 3550. I have had to set a MAC address clone on the E2000 of the PC that is also connected to the 3550.
The question I have is how do I get this all to interconnect so that the E2000 is used by the 2100 for validation to the internet provider (Time/Warner). I am also using the E2000 for DHCP.
Here is a copy of the running config:
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
[Code].....
I have a D Link WL-2100 AP, I connected my PC to AP with ethernet cable, then I tried to connect the AP to my wireless modem but I couldn't do.How can I make the AP recognize wireless modem?
View 2 Replies View RelatedI received a new modem with wifi and I'm still not receiving wifi even though I've hooked it up. I think that it's not hooked up properly.
View 1 Replies View RelatedI have a modem Scientific Atlanta 2100. I just installed windows 8 pro 64bit and when installing the driver to use the usb cable modem does not recognize it and simply not installed. I wonder if it is possible to use my usb cable modem or simply incompatible with my windows 8 64bit pro.
View 3 Replies View RelatedWe recently upgraded to higher speed internet and were to "reset" our modem, which is PCI Soft Data Fax Modem With SmartCP.How does one "reset" their modem?
View 1 Replies View RelatedIs it possible to pin out a DB37 (RS422) for DB25 (RS232) data port on a Satellite Modem? The question more so is can 232 data be passed through a 422/449 TX/RX Data port to a PC via a satellite modem?
View 1 Replies View RelatedSo I have a really neat computer sitting here, 2500K, P8z68-v, samsung 830 64gb ssd, corsair vengeance 16gb, deskstar hdd, firepro v5800
I have a non-descript trendnet 56K v.92 dial up modem installed to pci slot1 on my mobo.The phone company says they can't get a quicker connection than 31.2 Kbps established to dial up users in this area.The real issue is the data transfer rate.I have seen it reach as high as 6.xx Kbps but generally hovers around 2.5 Kbps.Now it is down to 1.xx Kbps and I took the last 48 hours downloading all the updates for windows and several other updates for hard ware etc.Now I need the ATI firepro update and 114 Mb will take over 16 hours at my average speed, and some 32 hours at the new slower speed
i have a cisco ACS version 5.0, I need to authenticate a wireless users connected to WLC 2100 controller when i connect the controller to a Dot1x port in the switch , the port go down.
View 6 Replies View RelatedI am currently running WLC - 2100 with software version : 7.0.98.0
My question is :
How to change the existing password ( not reset ) but change the password with the web interface ?
If that cant be done, then my guess is I have to do it via telnet/ssh session
I'm new to the Cisco WLCs and recently implemented a wireless infrastructure using a WLC 2100 with 1262 LWAPs. I have two of the 1262s plugged into ports 7/8 using crossover cables. They're functioning correctly with the exception of the inability SSH and send pings to the LWAPs behind the WLC. Is there anyway to ping/shh through the WLCs to the LWAPs behind it? I use an NMS (Nagios) to monitor the status of the LWAPs and it can't monitor them if it cannot ping them. Also, is there anyway to configure the WLC to monitor the status of LWAPs?
View 2 Replies View Relatedi have a dwl-2100 access point. first can this be used as a regular wireless router, and second, i tried the 192.168.0.1, and connection got reset a few times, so what else can i do to set out a pswd?
View 2 Replies View RelatedHow do i setup my d link dwl 2100 ap at my new address. I have moved and my installation cd has gone missing. The install wizard wants to work off the cd
View 2 Replies View RelatedI am trying to config my wireless lan controller (WLC) 2106 to discover my new 3500 access points.I followed the example Cisco configuration doc.69719.I am using a Cisco 3760 switch to interconnect the AP and WLC.I set up DHCP in the switch. [code]
View 6 Replies View RelatedSince few days the WLC 2100 series controller and 3x LAP1131AG are getting disconnected and the controller gets offline via the local ip address. At that point I have to reboot. To get anywhere and after I connect wirelessly to the AP before I know it it disconnects. It worked for 3 years straight no fuss. And now nothing. I reconfigured the WLC 10times and no diffference.
[code]....
I have a cisco AIR-LAP1262N-A-K9 and AIR-LAP1142N-A-K9, and i would like to join to Cisco WLC2106 (software version 7.0.98.0)My ap 1262N have 3 antennas externals with 7dbi of ganancy,Is possible to do it?
View 1 Replies View RelatedI have powered ON WLC(2100 Series) and connected LAN port from WLC to my PC. To access WLC GUI what is the factory default IP address?
I connected Console Port of WLC to Serial port of my PC. I have configured WLC as per the WLC quick guide.
Management Interface IP address :: 10.40.0.4
Management interface Net Mask: 255.255.255.0
[Code].....
The result is same even when below commands are used Configuration modeport adminmode all enablenetwork webmode enablenetwork secureweb enable
I'd WLC 2100 series and 9 access point LAP1142N .8 LAP1142N can work fine and join a capwap controller is ok but only one LAP1142 is can not . Part of LAP is AIR-LAP1142N-A-K9
Apr 2 10:52:42.284: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway found
*Apr 2 10:52:42.284: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway found
*Apr 2 10:52:42.284: LWAPP_CLIENT_EVENT: Dropping discovery in LWAPP. This AP model is not supported by LWAPP WLC.
*Apr 2 10:52:42.284: status of voice_diag_test from WLC is false
*Apr 2 10:52:52.284: %CAPWAP-3-ERRORLOG: Go join a capwap controller
[code]....
