Broadband :: Reset PCI Soft Data Modem?Feb 9, 2011
We recently upgraded to higher speed internet and were to "reset" our modem, which is PCI Soft Data Fax Modem With SmartCP.How does one "reset" their modem?
We recently upgraded to higher speed internet and were to "reset" our modem, which is PCI Soft Data Fax Modem With SmartCP.How does one "reset" their modem?
One of the many things that I liked about the e4200 over my olg 54GL was the fact that I could reboot it remotely. However, I've recently had a few problems that only a full power down would fix. In addition, I've noticed that the DCHP client table doesn't reset when I do a soft reboot. Is this intentional? Is the soft reboot not really a full reboot? Can it be made a real reboot?View 7 Replies View Related
Ok I have a toshiba satellite with the above stated modem in place, however I am not sure if the modem is wireless capable. I have been trying to figure out how to connect it to my network.View 2 Replies View Related
I have a cable modem installed to my property but want to use my modem/router to go wireless. The proble is my cable modem output is a RJ45 and the router input is RJ11.View 10 Replies View Related
reset my username and password as my wireless network is not secure at this moment. I'm using the DPC 3925 cable modem which I've just purchased from Starhub.View 4 Replies View Related
How do I reset my User Name and PasswordView 1 Replies View Related
I had some issues with network and I thought that reseting the modem might work. So I did it, I pushed the reset button thingy, but now I can't connect wireless. There is no network offered in "Wireless network connections", like the reset deleted it. What can I do about this?View 2 Replies View Related
I've been having this problem the past 2 days. around 7-7:30pm my motorola sbg6580 will reboot itself every 15m or so the rest of the night.I've checked all my line they are in good condition, I've done the whole pull out all the cords let it sit for 1 minute, I've factory reset it.called the cableone tech support and it even reset while i was on the phone with him. I have a tech coming out tuesday but if it's something i can troubleshoot and fix now i'd rather have that.View 2 Replies View Related
Im having problems connecting my broadband to the internet, when I press the "Connect" button here is what pops up;
The modem (or other connecting device) is already in use or is not configured properly.I've tried doing;
1. Tried installing the software+driver to other laptops and it works fine.
2. Tried changing different modems and installed the required driver but ends up not able press the "Connect" button at all.
3. Tried Uninstall/Reinstall the software/Driver.
4. Disable/Enable driver from Device Manager.
5. Tried Doing a Recovery system but fortunately the recovery system goes as far back the first time I've tried installing this device.
6. Tried disabling Anti-Virus
7. Tried installing old version of Mobile Partner but it seems like it didnt detect the device and a pop-ups saying "Failed to find Port" when installing Mobile Partner 2.3 .This laptop used this broadband before 1-2 months ago.
Yesterday I had to move the computer desk to paint the wall behind it,which included unplugging the router and modem.There are four computers in the house,three on wireless, and after I hooked everything back up the pc in my room and the hardwired one reconnected to the router and internet just fine.My brother's pc and my laptop though can't seem to connect, they attempt to connect but just say they can't connect.
I work at the Staples Easy Tech center and the resident tech there told me to do an IP flush or some such thing, but my google fuu is weak and this "ipconfig /release" and "ipconfig /renew" refuse to do anything without a connection to the network.I proceeded to hardwire my laptop and even then it says no internet connection and doesn't recognize the network. I already power-cycled the router.Maybe power-cycle the modem?Reset mac addresses?
I need to reset my DLink wireless modem all over again, can't get it to recognise the router, so thought that it would need to reset to factory defaut, how can I do this. Tried just hitting reset on the router,but nothing is happening.View 4 Replies View Related
i want to speed up utorrent and idm downloading speed and i am using mblaze usb modem(mts)View 1 Replies View Related
I am hard wiring a Netgear wireless modem DG834G to the LAN connection on my PC. The modem lights up, the internet light flashes then goes green and the connection to the PC is lit. My PC wont see the modem - when I type 192.168.0.1 it cannot access the Netgear setup page. I have tried swapping the cable and even bought a PCI Lan card and installed it but the modem wont work in either port? I've had the modem checked out and it works fine it's just something in my PC stopping it from seeing the Modem. At present I have a USB modem hard wired which works fine. I unplug this when trying to setup the NEtgear modem...View 6 Replies View Related
I have a Lan connection operating through a DSL. I also have a Wireless 3G modem. can I use both at the same time to boost my connection speed?View 1 Replies View Related
I have reset the modem but after resetting it I can't go for internet anymore with computer or wifi . And after that I notice that my wifi is not under any security which is free for all.can I know how to fix this problem ?the main problem is mostly that can't go internet after reset itView 2 Replies View Related
I HAVE AN I BALL BATON iB lr6111a and i need to connect the same to a router but it has only one rj45 port since the router dont have a modem how can i connect it to a modem with only one port.View 1 Replies View Related
i am using mblaze usb modem and i want to increase the speedView 1 Replies View Related
How secure is a broadband modem like version 4g lte hooked to a computer rather than hooked to wireless routerView 3 Replies View Related
I don't think it's my PC, because I tried using the Ethernet cord on my laptop, and got the same error "limited or no connectivity..." When I try to troubleshoot on my PC, it says the modem is fine. All the lights are green on the modem. I did notice that I have an IP address, but no Gateway Address. Also, I'm sending few packets, but receiving even fewer.Is it safe to say that this is a modem issue? Or something else? Is there anything that can be done? -resetting the modem did not work.View 14 Replies View Related
I need line settings for manual configuration.becouse seens i change my modem to aztech,i got a slow connection,not like before(good).View 1 Replies View Related
how to reset nokia siemens 1600 modem as i have forgotten its username & password which i changed?View 1 Replies View Related
My wireless was working but would load some pages super slow and others just fine. I reset my modem and router and now I can wireless connect to the router but get no connection. If I plug my computer directly to the modem I can connect the internet just fine. But if I hook up my router and connect it to my pc through a cable it can't connect just like the wireless.I have a linksys WRT54GSv1 Comcast is my ISP I ran Xirrus connection test and it said DNS Lookup Failure then No IP Availible.This is an ipconfg /all result
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
I set up an E1200 about two weeks ago to replace our old DI-524 because our net speeds were getting throttled (the old router wouldn't support anything higher than 10mbps). The same day, we started getting modem resets (We have an SB6120). This never happened on the old router but it's constantly happening with this new one. It'll happen multiple times a day. I called Cox Tech Support and they pushed an upgrade onto the modem but it still reset. I don't think it's the router, since I don't understand why it would force the modem to reset, but this never happened before I installed it. The firmware is updated to the latest version on the Cisco site (1.0.02).View 5 Replies View Related
HandPunch 3000 Time & Access Device, no Communication over the Ethernet, on the Ethernet Card the red light flashes for 1sec then red & Green for 1sec.View 1 Replies View Related
connect the desktop and my loptop in one modemView 1 Replies View Related
i recently opened internet cafe,i have internet connection of 8mbps, and i have 6 computers, and internet speed distributes 8 mbps to per computer, i want to decrease this speed, i want to give 1 mbps to every computerView 1 Replies View Related
I have recently changed my Router to a Draytek Vigor 2830N from the standard O2 broadband router. When I swap them out I get no internet access via the main PC that is connected via ethernet. However I can access internet via WLAN on any other device. here are the ipconfig details for before and after swap (same)View 3 Replies View Related
modem driver for windows 7 of linktop ct800pView 2 Replies View Related
I have a new router (ASUS RT-N10)and It is asking me to direct connect my cable modem to my computer, and then find my MAC address via command prompt, and clone it to the new router.I can get to my command prompt, the problem lies in windows 7 and vista's (or mine) inability to realize that my network card is directly connecting to the modem. (No internet connection available, doesn't think anything is connected). I have tried on multiple machines to try and find my modem's mac address but it simply is not working.I want to know if I can find the mac address through the old router, or what I need to do to have windows 7 recognize I'm directly connecting the modem to the PC.View 3 Replies View Related
Modem/router mac address changer .. i have globe wimax bm622i model, that needs to be change its mac address, hardly to find a right software, so i decide to manually config and do it by ms-dos commands, any related command for dos to change mac address of globe-wimax-bm622i-model.View 1 Replies View Related
I can't get my PC to connect to my broadband. I am running windows 7 64 bit and use the following:
Motorola Surfboard SB6120 modem;
NetGear WGR614 wireless router
I am able to connect with other devices (iPhone, Roku) to my wireless through the wireless router. My computer recognizes the broadband connection, but it won't connect to it. I get two errors when I try to connect:651: the modem has reported an error, and 638: the remote server is not responding in a timely fashion.I have tried connecting the ethernet cable directly to the modem, but I get the same results.Also, I have tried to cycle down the computer, router, then modem and turn them back on in reverse with no change in results.The connection worked until I clicked "disable connection" one day when I had trouble connecting (high traffic i think). Since then, the"home group" I set up originally with the connection wizard disappeared, and it had not been able to connect since then. When I try to connect I click on a small icon in the lower right that says, "not connected, connection available", then I click on the button to connect to broadband and get the errors described above.
im recieving ip conflict adress error i have an dsl modem and its my individual i ave not share a connection with anyone.and whenever i recieved this error my net works zeroView 1 Replies View Related
can a westell 7500 router/modem dsl from verizon connect to optimum broadband cable?View 1 Replies View Related
Digital Business and my SRP527W router has just arrived. While I wait for my digital business to be activated i've got a small Eee PC shareing its internet connection through a D-link (piece of garbage) router into my server and out to my LAN.
What I would like to do is install the USB modem into the USB slot of my Cisco Router so i can finally get my data cabinet set up.
The problem is that the Telstra modem when being installed onto a computer, it requires a PIN to activate and then you are required to 'connect' via a little user interface.
Will this be an issue? Will i be able to connect my USB modem to my router while i wait for Digital Business to get going?
I am trying to create a VBR soft pvc across a T3 and T1 backup link, but I am confused about what values to use for PCR, SCR and MCR. If I use high values for the T3, what will happen when this link is down and the soft PVC reroutes across the T1? I would like to use percents (%) for the values, i.e. voice can use 25% of the link, then it would make more sense when using the backup T1 link.View 2 Replies View Related
my new netcore nw705p wireless router dns is not respondinView 1 Replies View Related
My friend changed to TimeWarner cable a while ago. I bought her a netgear wireless switch to have wireless access. She has an old laptop as well with Vista on it, and was trying to connect that to the WiFi. Let her buy the Linksys. Didnt solve the problem and he turned off the wireless security to connect the Vista laptop. That was somewhere July 2011. Since than I have setup MAC filtering to at least have the WiFi not completely open to the public.View 2 Replies View Related
I have a Dell XPS 430 desktop and a Netgear DGN2000 modem/router. My ISP is Zen. The router is connected to the PC by an ethernet cable.I have had no problems accessing the internet for years until a couple of days ago when the monitors on the info bar show a triangle with a yellow exclamation mark. The Windows Diagnose and Repair reports - Error 815. The Broadband Network Connection could not be established because the remote server is not responding.My laptop with a wireless connection to the router as no problem connecting so I assume the router is OK.View 9 Replies View Related
I have internet over LAN with Motorola SB5102 broadband modem. Is it possible to share this internet on Edimax EW-7416APn V2 access point?View 1 Replies View Related
I have a Packetfront DRG700 broadband modem (fiberoptic), which also has a wireless DHCP server built-in. In addition I have a D-Link DIR-615 router which is connected by cable to the modem. I want both units to be wireless access points for the same local network.
I've tried disabling the DHCP server on the D-Link and naming both units with the same SSID and passphrase, but that didn't work because whenever I'm wirelessly connected to the D-Link, I get an IP address from my broadband provider and not from the DHCP server on my modem; i.e. I'm no longer connected to my local network.
I'm told by my provider that the reason is because the DHCP server on the DRG700 only works wireless, while the LAN ports are given IPs from outside the house. (I would use one of these ports for my broadband TV decoder.)
I try to upgrade LMS 4.2 to LMS 4.2.1 on a soft appliance and i got this error. To upgrade from LMS 4.2 to LMS 4.2.1:
lms/admin# conf t
lms/admin(config)# repository myrepo
lms/admin(config-Repository)# url disk://opt
lms/admin# application upgrade Cisco_Prime_LAN_Management_Solution_4_2_1upgrade.tar.gz myrepo
Save the ADE-OS running configuration?(yes/no) [yes]? yes
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Local file not found
I have 3 systems in my office, LAN connected. how to setup internet connection for every system with BSNL broadband DHCP modem.View 2 Replies View Related
While running the install wizard of soft appliance LMS 4.1 it asks for hostname and also the domain during the install. Is the hostname suppose to be fully qualified domain name exp: foo.blah.com or just hostname without fqdn exp: foo? Reason why I ask is when I ran the following command below in the shell it doesn't look like it is setup correctly. Also if I did the install without my hostname in dns first will this mess up my install?View 3 Replies View Related