Protocols / Routing :: No Internet Access After Reset The Modem?

Dec 12, 2012

I have reset the modem but after resetting it I can't go for internet anymore with computer or wifi . And after that I notice that my wifi is not under any security which is free for all.can I know how to fix this problem ?the main problem is mostly that can't go internet after reset it

View 2 Replies


ADVERTISEMENT

Protocols / Routing :: Laptop Connected To Modem But Not The Internet

Aug 20, 2012

Just yesterday my laptop could connect to the Internet. Now it would just connect to the modem (via wi-fi), and there would be no Internet connection. All other computers in my house using wi-fi work fine.Here are my results when I type in the ipconfig /all in the command prompt.

Configuration IP de Windows

Nom de l'h�te . . . . . . . . . . : Loc-PC
Suffixe DNS principal . . . . . . :
Type de noeud. . . . . . . . . . : Diffusion
Routage IP activ� . . . . . . . . : Non

[code]....

View 6 Replies View Related

Protocols / Routing :: Can Connect To Internet Without Settings In Modem

Mar 31, 2012

can i connect to internet without settings in modem is dat possible?

View 3 Replies View Related

Protocols / Routing :: Cannot Connect Wireless Tp-Link Adsl2+ N300 Modem To The Internet

May 13, 2012

I bought yesterday a wireless modem/router and Tp-Link Adsl2+ N300 Modem Router Td-W8960n.I have 2 laptop computers at home.The first issue I have is that with one of the laptops (quite old - Acer Aspire 2420-2579 with Windows Vista Basic Service Pack 1) I can not connect (wireless) to the internet. It says local access only. However in other countries (IM in NZ) it does connect to internet. It does work when I use an Ethernet cable between my router and the laptop. The second issue is with my other laptop. A HP Pavillion DV-4 windows vista home premium service pack 2. I manage to get wireless access to the internet but every couple of minutes the connections drops and starts again by itself�. After 1-2 min approx�. it is getting pretty annoying!I don�t think it is the routher as I also have an XBOX 360 connectet to the internet usign the same device and works absolutely fine!

View 6 Replies View Related

Protocols / Routing :: No Internet Access With New Router

Dec 18, 2012

I have a little problem with installing my new router. There were quite a lot of problems with the old smc, so I've bought a TP-Link router. I installed it just alright, it said congratulations, you have internet. I don't have though, not even on the directly plugged computer. It's kind of frustrating, since the old router is still working like before. So I plugged an ethernet cable from the old router's lan to the tp-link wan and with that, the new network is working just fine. The problem with the internet access occurs only, if the router is directly plugged to the modem. (The computers do find the network but the connection is kind of offline.) I don't really know what could be the problem, since I'm a little new to routers. I've read almost everything in the new router's manual and I'm pretty sure it's installed correctly. (ADSL username and password copied from the old settings, mac address copied, all ip addresses pinged, done power cycle etc..) I thought about resetting the modem, but I'm a bit afraid of losing the old router's internet connection as well.

View 8 Replies View Related

Protocols / Routing :: Pc Connects To Modem But Not Router

Mar 2, 2013

I was in an online game with my wife when I lost my internet connection. We are on the same Lynksys wireless-B router. My pc is running win7, hers has win8. I could not reconnect but could connect if I went directly into the modem. I have Comcast cable.

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all
Windows IP Configuratin

[code]....

View 5 Replies View Related

Protocols / Routing :: Modem And Router Port Forward?

Aug 15, 2011

I'm trying to forward ports for game connections. For this particular game, I'm trying to forward port 7777My ports aren't forwarding according to: Open Port Check Tool - Test Port Forwarding on Your Router and Open Port Check Tool[CODE]

View 13 Replies View Related

Protocols / Routing :: Belkin Enhanced Wireless Modem Router?

Oct 5, 2011

I bought this ( Belkin N150 Wireless Modem Router with Push Button Security Set Up and Network Status Display (F6D4630uk4A): Amazon.co.uk: Computers & Accessories )I want to use this instead of the modem I have now. Is it possible to make this my modem to connect to from the internet? I have a cheap talktalk modem and I want to get rid of it.

View 2 Replies View Related

Can't Connect To Internet / Router After Modem Reset?

Feb 18, 2012

Yesterday I had to move the computer desk to paint the wall behind it,which included unplugging the router and modem.There are four computers in the house,three on wireless, and after I hooked everything back up the pc in my room and the hardwired one reconnected to the router and internet just fine.My brother's pc and my laptop though can't seem to connect, they attempt to connect but just say they can't connect.

I work at the Staples Easy Tech center and the resident tech there told me to do an IP flush or some such thing, but my google fuu is weak and this "ipconfig /release" and "ipconfig /renew" refuse to do anything without a connection to the network.I proceeded to hardwire my laptop and even then it says no internet connection and doesn't recognize the network. I already power-cycled the router.Maybe power-cycle the modem?Reset mac addresses?

View 14 Replies View Related

Protocols / Routing :: Port Forwarding Minecraft - Qwest Modem / Linksys Router?

Oct 1, 2012

port forwarding this im trying to setup a minecraft server with bukkit and i tried a number of things to port forward and it won't open port. I have a tomato firmware linksys router and a qwest modem.

View 1 Replies View Related

Protocols / Routing :: Cannot Access A Certain Website?

Nov 28, 2011

I can access the website in other places(such as my library, another house, my university, my towns book store, etc.) but not at my own house. I can access the website anywhere but my own home! I contacted my ISP provider and he said that the website was not blocked by the ISP provider because the ISP consultant was able to access the website .I know the problem isn't rooted in my computer and believe that the problem is IP related because I was not able to access the website on either of the three computers at my house.

View 4 Replies View Related

Protocols / Routing :: Can't Access Google Servers?

Jun 9, 2011

My computer won't connect to any of Google's servers. ANY of them. Gmail, docs, reader, nothin. I can visit youtube, but I cannot get to the log-in page. EVERY other site works pretty well. Heck, even using a site that uses a Recaptcha it doesn't load the recaptcha!Nothing wrong with my hosts file.

Tracert results in 6 successful hops and then times out (I think at my ISP?)
the last 2 successful hops are
chnddsrj01-ae2.0.rd.ph.cox.net
And then
langbprj02-ae2.rd.la.cox.net
Then all time outs

My other PC is connected to the SAME wifi network right now, and I'm posting from it, and it works fine. Both are on XP. Reboots haven't worked. Happens on all browsers. Every other website I can find is just fine.

View 9 Replies View Related

Protocols / Routing :: Cable Blocking Access To MSN?

Jan 16, 2013

We have three home systems connecting to the internet. Our cable/phone/internet provider upgraded their phone service to digital and installed a new modem/router combo (three months ago). Since then we've not been able to access MSN.com on our XP laptop and droid tablet but can access it on our windows 7 laptop. When the router settings are changed to "Bridged" and the router firewall is turned off, we can connect. We've changed the modem and the problem still continues. Our cable provider is stumped and so am I.

View 9 Replies View Related

Protocols / Routing :: Opening Port 80 For WAN Access To Localhost?

Dec 22, 2012

So I am working on a website with MySQL/PHP that I have been developing on my Linux box. I wanted to show a friend my progress so I temporarily opened up port 80. So he was able to just type in my public IP and it brought him to my localhost index.

My question is, when I type in my IP address in the URL bar, does the web browser automatically just assume port 80? What happens if I want to have 2 different servers from the same local network and one is running through port 80 and the other is running through port 90? In this case, would I have to type ":90" to access the machine running on port 90?

View 1 Replies View Related

Protocols / Routing :: DI-524 Can't Access Username / Password Field

Jun 26, 2012

I did not know the username and password for my DI-524 so I wanted to do a reset...used a paper clip and held the reset button for ten seconds, unplugged it, powered it up, and as per online instructions tried to type in 192.168.0.1 to access the username and password field so that I could enter "admin" and blank password. Here's where my lack of knowledge comes in. I am working off a MacBook with no Ethernet connection, just wifi. Is what I am trying to do even possible? Or does the computer I configure the router with have to be hardwired to the Internet while I do it?

View 1 Replies View Related

Protocols / Routing :: How To Restrict Access On Apps Using A Router

Jan 26, 2011

I am wondering how to restrict access to certain applications; software and hardware via a router.

View 2 Replies View Related

Reset Windows Xp And Now No Internet Access?

Sep 26, 2011

I had to reset my windows xp back to factory settings so i lost all my files but the important thing is that i cant get internet access. I have a modem and router and it does say on the computer that they working but still have no access. I tried to feasting everything and still nothing. I'm not sure what else i should do. Did my files get corrupted?

View 2 Replies View Related

Protocols / Routing :: To Make People Access The Application On Server

Apr 16, 2013

I have a computer named server and it ip is 192.168.0.5 and a live ip xxxxxxxx which is a private ip. on this system my oracle middle wear is running.I just want that people may access my application which is running on 'server' through public ip. Is it possible. If it is. then how.=]

View 1 Replies View Related

Protocols / Routing :: Port Forwarding To Access Share Point

Mar 31, 2013

I've been trying to configure my router which is linksys E1000 to forward port to my sharepoint server. Here is what I have done so far, setup single portforward to i.e 192.168.xx.xx using port 4848.Now my question is, do I need to configure sharepoint to receive this incoming connection. I do need to have my sharepoint be accessed anywhere on the web.

View 1 Replies View Related

Protocols / Routing :: Access Secondary Subnet From Remote Location?

Apr 12, 2011

Main Site allows communication from Remote Site via VPN to Windows ServerMain Site also has a secondary subnet that communicates ONLY through internet but NOT to the Windows Server.Sonicwall 192.168.168.x is main siteRemote Site is 192.168.0.x connecting to Main Site to access shared folders on serverSecondary subnet at Main Site is 192.168.0.x using Windows XP PC's. They are accessing a linux server at 192.168.0.215 which Main Site has no access to.VPN remote ip's are 192.168.0.x - they can successfully access the Windows Server at 192.168.168.100 BUT NOT 192.168.0.215.GOAL: Want to connect Remote Site to Secondary subnetWilling to make router changes or whatever is necessary to get Remote Site to access Secondary Subnet with the only exception that the Secondary Subnet REMAINS.VPN DHCP is turned off but willing to turn it on.Willing to make the Linux Server 'discoverable' on the Windows Server. Don't know linux at all but another co-worker set it up and can make changes.

View 4 Replies View Related

Protocols / Routing :: Can't Access Wireless Repeater Set-up / Admin Page

Dec 27, 2012

I have two wireless repeaters and can no longer access their set-up / admin page via default IP 192.168.10.1,I don't know the brand of the repeaters, which are commonly sold on eBay. Here's one example: eBay Item # 300829809133, They work well as repeaters, but it's frustrating that I can no longer access their set-up / admin page via default IP 192.168.10.1. Right now I have only one repeater plugged in and connected to my laptop via ethernet cable. The 2nd repeater is unplugged. The Wifi on my laptop is switched off and disabled, so I'm actually connected to the Internet via my laptop's ethernet port via ethernet cable to the repeater's ethernet port, then via wifi signal from the repeater to my Zyxel wireless router and Comcast cable modem. If I'm connected to the Internet via the repeater, why can't I access the repeater's set-up / admin page using default IP 192.168.10.1? When I enter http://192.168.10.1/ into Internet Explorer, I get only the error message "Internet Explorer cannot display the webpage"

View 3 Replies View Related

Protocols / Routing :: Can't Get Access To Router After Changing DSl Up-link To Ethernet

Jun 15, 2011

I recently bought a tenda w548d Version 2.0 Adsl2+ Modem router. it worked fine with its default settings and wired connection was ok when i chose DSL uplink while installing its driver from CD. But it couldn't connect wireless. There were strong signals but connected computer couldn't get access to the internet. so i tried using ethernet uplink instead of DSL uplink while reinstalling the software Since then the light of ADSL never lights, even it never blinks. now the software on the cd can connect to the router. i cannot access its settings using IP address in browser, the page wouldn't load. I am so worried. Can i revert the setting back to dsl uplink?I can connect to the internet very smoothly using my old router so you can't blame my phone line or lan wire. I have tried reset the new router many times but still the ADSL light never lights up. And the ADSL light is ok because when i turn the router on, it lights with all the others.

View 2 Replies View Related

Protocols / Routing :: Two Paths To Internet One Network

Jul 27, 2011

I have a local DSL line in our remote office. We are connecting a microwave antennae that carries our main office internet to the remote office.I want to be able to connect both paths to a Layer 3 switch and route traffic through the main office with the router connected to the DSL as a fail-over solution.I would really like to stick with HP Procurve's if possible.

View 3 Replies View Related

Protocols / Routing :: Who Is Your Internet Service Provider

Sep 4, 2012

Is this a wired or wireless connection issue? Both Who is your Internet Service Provider (ISP)? Comcast..What type of Broadband connection are you using? Cable..What is the exact Make and Model of your Modem, Router or Modem/Router Combo - (Main)Netgear WNR3700v2 / WNR2000v3(secondary) My current setup is the 3700 router is taking the internet from the modem cat5e and spewing the wireless. I would like to have the secondary router use the wireless from router 1 as the internet source and push the internet out of the 4 hardline ports so I can plug my upstairs xbox 360 into the router via cat5e. I'm just kinda new to this and still learning so I'm not sure how to configure the router to do this. I can get into the settings of the router just fine but finding the right settings to tweak is a little difficult.

View 3 Replies View Related

Protocols / Routing :: Why Can't Connect To The Internet Right Now Using IPv6

Feb 16, 2011

The whole thing about IPv6 has been out for what is probably a couple of years now. But I find it very odd how even my newest modem/router can't even support it yet. Why on earth are manufacturers such as Netgear holding back so much on making their products IPv6 compatible? The IANA has just about given out what is left of the addresses, and we still have time to adapt by working our way over to IPv6 as it can work simultaneously with IPv4. Companies have been given years to prepare.

Why can't I connect to the Internet right now using IPv6? Not only is my router holding me back, but will my ISP hold me back as well?

View 1 Replies View Related

Protocols / Routing :: IP Camera Not Accessible Through Internet

Feb 28, 2012

I purchased an IP Cam for my girl friend to monitor her dog, she lives in an apartment complex that provides internet. I have been able to get the camera setup at my house to be accessed through the internet. I have a cable modem and a router, setup a dyndns account, port forwarded my router and boom it worked. Went to my gf's apartment and I didn't think of it at first until I was frustrated, but realized the apartment complex probably has a router of its own. I can access the cam on her LAN but not through the internet.

View 3 Replies View Related

Protocols / Routing :: Connecting To Internet Via Router

Mar 31, 2011

I have att dsl and they supplied me with a modem, a motorola model type 2210, and my belkin surf N300 router is giving me issues connecting to the internet. Im pretty sure my wireless network adapter is a netgear wg311v3.The issue im having is that sometimes i can connect to the internet just fine, and sometimes i cant connect to the internet. I know it is a router issue because when i plug the modem into my comp, i can access the internet 100% fine.I also think it is not a wireless network adapter issue because i ran an ethernet cable from the router to my comp and had the same issues. There are 2 other computers on the network, one of them is a year or two newer than my dell desktop, and has no issues whatsoever connecting to the internet via the router. The other computer on the network is a Wii, and has connection issues when playing online (probly a different issue), but can access the internet no problem.

View 1 Replies View Related

Protocols / Routing - Changed IP And Now Can't Connect To Internet?

Apr 6, 2011

Basically, I was following instructions of how to forward a port to get higher speeds on bitcomet.After doing allsorts which I don't understand (yes, very stupid I know, but I've learned my lesson now), I restarted my computer and have since been unable to connet to the internet.

I have tried a system restore which didn't work and also searched google for hours but to no avail.When I diagnose the problem with windows,it states," "Wireless Network Connection" doesn't have a valid IP configuration.I am running Windows 7 btw.

View 5 Replies View Related

Protocols / Routing :: Unable To Connect To Internet

Mar 4, 2013

In recent days, there was an electrical fault and my computer does not automatically connect to the wireless network in the house, since then. I do not know what happened.

View 1 Replies View Related

Protocols / Routing :: Buffalo WHR-G125 - Can't Access Router Settings (404 Error)

Aug 31, 2011

I have a Buffalo WHR-G125 router which was given to me for free by my ISP for being a loyal client. At home I have a computer, a laptop and a netbook. The router is connected to the computer and I have no trouble accessing the Internet on all three of these devices. I can open pages, download etc.

However: However if I decide to host a server on some game, my friends cannot connect. After doing some research, I found out that certain ports are "closed" (whatever that means) and I need to open them in order for everything to start working again."

Anyway, I checked the infamous site "portforward.com" for instructions on how to open these ports. It was all fine and dandy, until the point where they stated I need to access my router settings page ("default gateway" or whatever, you'll have to excuse my ignorance). I entered "ipconfig" in cmd and it turns out my default gateway is 192.168.1.1. So I entered this in the URL bar of my browser and got a nasty surprise:

"404 Not Found The requested URL was not found"

I am truly stumped. The address is not accessible on neither the computer, nor the laptop or the netbook. I tried some automatic port forwarding software, but it didn't seem to do anything for me.

The only reason for this I can think of is that my ISP is probably blocking the router settings page for some reason (and how unfortunate, I can't even complain, because it's free, after all).

I tried asking on the official Buffalo forums and even tried asking for support and got pretty much the same message: "Try resetting. However, if it's flashed, you can't do anything.".

Not exactly sure what to do right now. My worries:

1.) I'm not even exactly sure how to reset the darn router

2.) I'm scared that reseting won't do a thing and even if it does, I'm not sure I'll be able to reconfigure the entire thing by myself and the worst case scenario, not having internet at all.

Is there any way to access the friggin router settings page?

View 5 Replies View Related

Linksys Access Point :: How To Reset WAP11 With No Reset Switch

Apr 16, 2013

I have the WAP11 serial number G3110320414 that does not have a reset switch in the back. How do I get back to factory settings?

View 3 Replies View Related

Acer 6930 - Lost Internet Access After Reset?

Nov 23, 2012

After reset to factory settings of my Acer 6930 I have lost my internet access.Tried wi-fi and ethernet but neither find my router.

View 6 Replies View Related

Protocols / Routing :: Escalate An Internet Routing Beyond My ISP?

Apr 5, 2013

We have a PPPoE DSL link with a dedicated IP providing by a small ISP(ISP A) in Canada. We are having trouble reaching a small group of IPs in the US to be able to access some client resources.We have eliminated all possible local issues by removing the firewall and making a direct connection to the ISP. We have also had numerous tests prove successful when we use other local ISPs.

Trace routes show that the packets get dropped a few hops from the destination on a US ISP(ISP B).The routes even appear to be very similar to the other ISPs we tested. We escalated to ISP A and they say that everything is working properly on their end and the problem is with ISP B. They claim they "have no partnership with ISP B and therefore cannot create a ticket to get it resolved". I tried calling ISP B but I get nowhere because I am not a customer of theirs.

My solution is to give ISP A the boot, but management has denied that request because of the amount of effort required to switch over. How I can escalate this? Is there anyway to go over and above the ISPs?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved