Protocols / Routing :: Cable Blocking Access To MSN?
Jan 16, 2013
We have three home systems connecting to the internet. Our cable/phone/internet provider upgraded their phone service to digital and installed a new modem/router combo (three months ago). Since then we've not been able to access MSN.com on our XP laptop and droid tablet but can access it on our windows 7 laptop. When the router settings are changed to "Bridged" and the router firewall is turned off, we can connect. We've changed the modem and the problem still continues. Our cable provider is stumped and so am I.
View 9 Replies
ADVERTISEMENT
Sep 2, 2011
I live outside the US but want to listen to US radio stations online and, naturally, a lot of them are blocked because I'm not in the US. I've tried a few places and applications, like UltraSurf, FoxyProxy, to get around this but they either don't work or are so convoluted as to be impossible to use. What else is out there that actually works and isn't pain to use?
View 1 Replies
View Related
Dec 11, 2011
We have a group of computers on their own VLAN. A router allows internet access while keeping them sandboxed. We don't want them accidentally connect to our production network. We blocked their wireless MACs in unauthorized WAPs. I'd like to do the same thing for their ethernet MACs on our switches, (a mixture of 2950,2960 and 2960G currently testing on C2960-LANBASE-M, Version 12.2(25)SEE2). I've been unable to locate the correct method on google, by searching these boards or in the command reference.
What is the best practice for blocking a group of MACs from accessing a particular VLAN on a network consisting of several Layer 2 Switches?
View 4 Replies
View Related
Nov 28, 2011
I can access the website in other places(such as my library, another house, my university, my towns book store, etc.) but not at my own house. I can access the website anywhere but my own home! I contacted my ISP provider and he said that the website was not blocked by the ISP provider because the ISP consultant was able to access the website .I know the problem isn't rooted in my computer and believe that the problem is IP related because I was not able to access the website on either of the three computers at my house.
View 4 Replies
View Related
Jun 9, 2011
My computer won't connect to any of Google's servers. ANY of them. Gmail, docs, reader, nothin. I can visit youtube, but I cannot get to the log-in page. EVERY other site works pretty well. Heck, even using a site that uses a Recaptcha it doesn't load the recaptcha!Nothing wrong with my hosts file.
Tracert results in 6 successful hops and then times out (I think at my ISP?)
the last 2 successful hops are
chnddsrj01-ae2.0.rd.ph.cox.net
And then
langbprj02-ae2.rd.la.cox.net
Then all time outs
My other PC is connected to the SAME wifi network right now, and I'm posting from it, and it works fine. Both are on XP. Reboots haven't worked. Happens on all browsers. Every other website I can find is just fine.
View 9 Replies
View Related
Dec 18, 2012
I have a little problem with installing my new router. There were quite a lot of problems with the old smc, so I've bought a TP-Link router. I installed it just alright, it said congratulations, you have internet. I don't have though, not even on the directly plugged computer. It's kind of frustrating, since the old router is still working like before. So I plugged an ethernet cable from the old router's lan to the tp-link wan and with that, the new network is working just fine. The problem with the internet access occurs only, if the router is directly plugged to the modem. (The computers do find the network but the connection is kind of offline.) I don't really know what could be the problem, since I'm a little new to routers. I've read almost everything in the new router's manual and I'm pretty sure it's installed correctly. (ADSL username and password copied from the old settings, mac address copied, all ip addresses pinged, done power cycle etc..) I thought about resetting the modem, but I'm a bit afraid of losing the old router's internet connection as well.
View 8 Replies
View Related
Dec 12, 2012
I have reset the modem but after resetting it I can't go for internet anymore with computer or wifi . And after that I notice that my wifi is not under any security which is free for all.can I know how to fix this problem ?the main problem is mostly that can't go internet after reset it
View 2 Replies
View Related
Dec 22, 2012
So I am working on a website with MySQL/PHP that I have been developing on my Linux box. I wanted to show a friend my progress so I temporarily opened up port 80. So he was able to just type in my public IP and it brought him to my localhost index.
My question is, when I type in my IP address in the URL bar, does the web browser automatically just assume port 80? What happens if I want to have 2 different servers from the same local network and one is running through port 80 and the other is running through port 90? In this case, would I have to type ":90" to access the machine running on port 90?
View 1 Replies
View Related
Jun 26, 2012
I did not know the username and password for my DI-524 so I wanted to do a reset...used a paper clip and held the reset button for ten seconds, unplugged it, powered it up, and as per online instructions tried to type in 192.168.0.1 to access the username and password field so that I could enter "admin" and blank password. Here's where my lack of knowledge comes in. I am working off a MacBook with no Ethernet connection, just wifi. Is what I am trying to do even possible? Or does the computer I configure the router with have to be hardwired to the Internet while I do it?
View 1 Replies
View Related
Jan 26, 2011
I am wondering how to restrict access to certain applications; software and hardware via a router.
View 2 Replies
View Related
Apr 16, 2013
I have a computer named server and it ip is 192.168.0.5 and a live ip xxxxxxxx which is a private ip. on this system my oracle middle wear is running.I just want that people may access my application which is running on 'server' through public ip. Is it possible. If it is. then how.=]
View 1 Replies
View Related
Mar 31, 2013
I've been trying to configure my router which is linksys E1000 to forward port to my sharepoint server. Here is what I have done so far, setup single portforward to i.e 192.168.xx.xx using port 4848.Now my question is, do I need to configure sharepoint to receive this incoming connection. I do need to have my sharepoint be accessed anywhere on the web.
View 1 Replies
View Related
Apr 12, 2011
Main Site allows communication from Remote Site via VPN to Windows ServerMain Site also has a secondary subnet that communicates ONLY through internet but NOT to the Windows Server.Sonicwall 192.168.168.x is main siteRemote Site is 192.168.0.x connecting to Main Site to access shared folders on serverSecondary subnet at Main Site is 192.168.0.x using Windows XP PC's. They are accessing a linux server at 192.168.0.215 which Main Site has no access to.VPN remote ip's are 192.168.0.x - they can successfully access the Windows Server at 192.168.168.100 BUT NOT 192.168.0.215.GOAL: Want to connect Remote Site to Secondary subnetWilling to make router changes or whatever is necessary to get Remote Site to access Secondary Subnet with the only exception that the Secondary Subnet REMAINS.VPN DHCP is turned off but willing to turn it on.Willing to make the Linux Server 'discoverable' on the Windows Server. Don't know linux at all but another co-worker set it up and can make changes.
View 4 Replies
View Related
Dec 27, 2012
I have two wireless repeaters and can no longer access their set-up / admin page via default IP 192.168.10.1,I don't know the brand of the repeaters, which are commonly sold on eBay. Here's one example: eBay Item # 300829809133, They work well as repeaters, but it's frustrating that I can no longer access their set-up / admin page via default IP 192.168.10.1. Right now I have only one repeater plugged in and connected to my laptop via ethernet cable. The 2nd repeater is unplugged. The Wifi on my laptop is switched off and disabled, so I'm actually connected to the Internet via my laptop's ethernet port via ethernet cable to the repeater's ethernet port, then via wifi signal from the repeater to my Zyxel wireless router and Comcast cable modem. If I'm connected to the Internet via the repeater, why can't I access the repeater's set-up / admin page using default IP 192.168.10.1? When I enter http://192.168.10.1/ into Internet Explorer, I get only the error message "Internet Explorer cannot display the webpage"
View 3 Replies
View Related
Jun 15, 2011
I recently bought a tenda w548d Version 2.0 Adsl2+ Modem router. it worked fine with its default settings and wired connection was ok when i chose DSL uplink while installing its driver from CD. But it couldn't connect wireless. There were strong signals but connected computer couldn't get access to the internet. so i tried using ethernet uplink instead of DSL uplink while reinstalling the software Since then the light of ADSL never lights, even it never blinks. now the software on the cd can connect to the router. i cannot access its settings using IP address in browser, the page wouldn't load. I am so worried. Can i revert the setting back to dsl uplink?I can connect to the internet very smoothly using my old router so you can't blame my phone line or lan wire. I have tried reset the new router many times but still the ADSL light never lights up. And the ADSL light is ok because when i turn the router on, it lights with all the others.
View 2 Replies
View Related
Aug 31, 2011
I have a Buffalo WHR-G125 router which was given to me for free by my ISP for being a loyal client. At home I have a computer, a laptop and a netbook. The router is connected to the computer and I have no trouble accessing the Internet on all three of these devices. I can open pages, download etc.
However: However if I decide to host a server on some game, my friends cannot connect. After doing some research, I found out that certain ports are "closed" (whatever that means) and I need to open them in order for everything to start working again."
Anyway, I checked the infamous site "portforward.com" for instructions on how to open these ports. It was all fine and dandy, until the point where they stated I need to access my router settings page ("default gateway" or whatever, you'll have to excuse my ignorance). I entered "ipconfig" in cmd and it turns out my default gateway is 192.168.1.1. So I entered this in the URL bar of my browser and got a nasty surprise:
"404 Not Found The requested URL was not found"
I am truly stumped. The address is not accessible on neither the computer, nor the laptop or the netbook. I tried some automatic port forwarding software, but it didn't seem to do anything for me.
The only reason for this I can think of is that my ISP is probably blocking the router settings page for some reason (and how unfortunate, I can't even complain, because it's free, after all).
I tried asking on the official Buffalo forums and even tried asking for support and got pretty much the same message: "Try resetting. However, if it's flashed, you can't do anything.".
Not exactly sure what to do right now. My worries:
1.) I'm not even exactly sure how to reset the darn router
2.) I'm scared that reseting won't do a thing and even if it does, I'm not sure I'll be able to reconfigure the entire thing by myself and the worst case scenario, not having internet at all.
Is there any way to access the friggin router settings page?
View 5 Replies
View Related
Feb 18, 2011
WAG320 allows website blocking, to enable this you can use a keyword. I would like to use this function to block anoying advert sites (in the same way I could with my Netgear DG834GT) - However the way this function has been implemented is less than ideal.
e.g. when a site is blocked by the router, the router does not return a response - this is great until that site forms only part of a web page that is permitted. What then happens is the web page takes forever to load as the responses have to timeout for the blocked components.
The way this function *should* have been implemented, is the router should return a blank response for each of the blocked sites. Netgear do this and it works a treat, they even put up a banner saying "Website blocked by Netgear".
This is such a simple feature, why has Cisco overlooked this and how do I go about raising a product enhancement ? I've been through the helpdesk which quite frankly is a farse, they asked me to reflash my firmware which surprisingly didn't resolve the issue - they then told me to send them the unit back because it must have a fault !?!? (and I have to pay for postage of course!) I explained the issue about 5 times, but the operator on the other end was just a script reader and I could not speak to an engineer - very poor.
View 2 Replies
View Related
Nov 2, 2012
This is now an issue with new firmware. I cannot even log into blockbuster.com. I have noticed cookie issues since 2.0.04 firmware installed.
View 9 Replies
View Related
Jul 8, 2012
MY ISP installed one router in my lab.for internet connectivity they mail me steps :connect your Laptop directly to gi0/3 port to check internet connectivity with public ip 1.1.1.x and Gateway 1.1.1.1 with subnet mask 255.255.255.240 after connection I surprised because I am able to access only google sites like gmail,google search etc. but I am able to ping/traceroute all sites.from browser I am able to access only google sites only.In Router no firewall no such access list.
View 2 Replies
View Related
Aug 1, 2011
Every time I turn on my PC I find I have lost internet access. I can fix this by going to Network Connections, disabling the connection, re-enabling the connection.But why does this happen? I notice the the following:1. When I look at the Network Connection it shows "Local Area Connection, Network 3, Unidentified network, Realtek PCIe....."2. When I re-enable the network AVG tells me the Firewall settings have changed - Directly Connected to Network has been set to Unidentified..... etc
View 2 Replies
View Related
May 21, 2012
I am setting up a network for a friend with children. He has a BT homehub and wants to block their access between certain hours. However by using access control on BT it tells you that you have been blocked which is no good as he cannot feign ignorance and pretend he doesn't know what to do (as his kids will pester him to fix it). He therefore wants to block their access more discreetly (as if the internet was generally timing out or messing up instead of actually displaying they have access control).Is there a way to block an individual's access on the router without blocking everybody either on a timer or manually done each time (thus if there isn't a way of automating it he can at least do this manually each time).
View 3 Replies
View Related
Apr 20, 2013
For the last week, I haven't been able to access my banking web site (Royal Bank in Canada). It doesn't matter which browser (FireFox, IE, Chrome) or computer (desktop, laptop) or even my cell (on WiFi).It must be the router (DIR-825, HW-B1, FW-2.07NA) since I can connect to the web site fine if I connect straight to the modem. (Also, if I turn off WiFi on my cell, I can connect to their web site but once I turn WiFi back on, it wont connect).I tried restoring to factory settings but that didn't work.I tried some of the suggestions here: http:[url].....
- Turn off ALL QoS or Disable Traffic Shaping. Advanced/QoS.
- Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual.
- Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking
- Ensure devices are set to auto obtain an IP address.
- Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall.
- Enable uPnP and Multi-cast Streaming under Advanced/Networking.
View 3 Replies
View Related
Feb 20, 2012
Small business with 4 computers networked together and sharing coommon software programs and files. Need to block one of the computers access to the Internet whille allowing the other 3 access to the Internet. Is this possible/ If so How?
View 3 Replies
View Related
Aug 30, 2012
How can I block and make sure no one has remote access to my computer
View 1 Replies
View Related
May 12, 2013
I use my WAP610N as access point (AP) in a network with a router.Firmware is up to date (1.0.0.4 build 7).After I connect my mobile phone the AP crashes after a few minutes. (The firmware of the mobile phone is also up to date.)Then it blocks the whole LAN until I disconnect the network cable from the AP. Then the rest of the network works just fine.Blocking means, that a computer connected to a lan port of the router can't ping anything nor has access to the internet anymore.I need to power off the WAP610N and after the restart it works again.
Also is there any way to debug or at least show some kind of log on the WAP610N? The web client seems to have no such features. Is there an additional URL with more commands? It seems that theres no telnet console either.
View 5 Replies
View Related
Jan 30, 2012
I wish to block some url that users have access through my LAN
Thats i wish to block icmp,access towards such sites, i wish to block icmp because dns will resolve the domain and they can access through ip address.
what i have in place is a cisco 2800 series routers
View 2 Replies
View Related
Aug 6, 2012
Im using d-link 855 router to block internet to certain machines, using access control within dlink and then in putting the ip for the right machines. But it seems the machines keep changing the IP adresses everything they boot thus getting internet access the next day.
View 14 Replies
View Related
Feb 26, 2012
Like others I see on this board, we've got middle- and high-school age kids whose access to FB and other sites needs to be controlled/scheduled.
I thought the DIR-655 was great, in that it has features that, on the face of it, would seem to be ideal for blocking domains and restricting access.
My problem: I've never been able to get this to work.
I've set up schedules and created lists of domains that I want to limit access to according to the schedules, but the only constraint I've ever gotten to stick is blocking access completely to the router.
*None* of the schedule-based or website-based access controls have ever worked; I'll put the block in place to my daughter's computer's MAC address so she shouldn't be able to get to youtube or facebook, save, bounce the router, but then I go by her room and she's still busily chatting away online to her FB friends.
Based on similar posts I've seen on this forum, this may not be a unique problem.
So in a nutshell, this is what I want to do:
1) Block certain computers (identifiable by MAC address)
2) from being able to get to particular named domains (and any of their sub-domains)
3) according to a schedule that I can create and modify.
My preference would be to do this in the router, but again, responses I've seen here suggest that may not be possible.
View 1 Replies
View Related
May 30, 2011
After adding the below Extended Access-List Entry into my 1841 Router, access-list 102 permit ip host 192.168.1.1 any. I can access the Internet from this client but cannot connect to this client from another branch through vpn tunnels. I can access all other clients that do not have this access-list entry.
View 5 Replies
View Related
Apr 28, 2013
How to successfully block access to Instagram with the ISA550W? Also, have you experienced any significant latency with URL filtering and AV protection enabled?
View 3 Replies
View Related
Aug 6, 2011
I cannot connect to my company’s VPN after installing the current firmware (FW_E4200_1.0.02.013_US_20110524) on my E4200 router. Version 1.0.01 was on the router when I received it, and it worked without issues. As soon as I upgraded version 02, I could not initialize a VPN connection. When I try to start a VPN session, I get a "page not found" error when attempting to initiate SSL VPN service using a Microsoft Forefront Unified Access Gateway. VPN pass through is enabled for all protocols in the e4200’s setup. As soon as I revert to firmware 01, everything works fine again.
I did a fresh download and re-flashed the 02 firmware just to make sure that it wasn’t an issue with a bad download or a faulty flash. The problem is consistent and repeatable. I have upgraded and downgraded twice, and the results are exactly the same. My VPN connection works with firmware 01, and it fails with version 02. There is a something different in the 02 firmware that is blocking VPN access.
View 9 Replies
View Related
Nov 16, 2012
Belkin N450 Router. I want to restrict Internet access completely but allow LAN access to a shared drive for a particular computer on my wireless network. I have gone into the web based set up page and under access controls have enabled and added this computer to the list. I have blocked http, https, ftp and nntp. I don't know if this is enough. The reason I am asking is that I am in Iraq right now and I want to allow my fellow team members access to the wireless for using viber on their iphones but one cat even though he has hardwired internet wants to continuously suck off my wireless for his computer to download stuff since I paid for faster internet. I am trying to do this quietly and still allow him access to the shared drives on the LAN. Sooooo If I block him just outright will he still have access to the drives or do I need to pick and choose like I did above and if I need to pick and choose did I miss anything other then pop3 email and imap?
View 2 Replies
View Related
Aug 8, 2011
After updating the firmware of my WRVS4400N from V 2.0.1.3 to 2.0.2.1 all traffic was blocked for all machines, even some not included in the list of PCs. As the log was showing that all traffic was blocked by access policies, I disabled the only rule I had (blocking access to some sites to some MAC address list) and everything worked fine.I tried creating a new, simpler rule but after activation it blocked again all traffic for all the LAN.After many trials, I decided to roll back to the previous V2.0.1.3 which solved this problem.
View 1 Replies
View Related
