Small business with 4 computers networked together and sharing coommon software programs and files. Need to block one of the computers access to the Internet whille allowing the other 3 access to the Internet. Is this possible/ If so How?
View 3 Replies
I am trying to setup internet access and intranet access using two cards per PC. I don't have sever software and I want to be able to share files between several machines. I have two routers. One that connects to cable modem and one that connects to intranet side. I have assigned different static ip addresses to both cards.
View 6 Replies View RelatedI'm looking at doing an intranet project at work. What i want is to have one main machine that will have a forum and website on (probably Windows IIS on Windows 7). Then i want to have approximately 10 other users on laptops that can connect to my intranet forum and site via "wireless" connection, but at the same time none of those 10 laptops or my main machine having any "internet" access. Is this possible and if so how
View 5 Replies View RelatedI'm trying to connect my portables to a central server that has all my music on it, all located in the same area. I've tried ad-hoc but it limits me to using the preset shared folders only, and its frustrating to use as it breaks once a computer leaves the network.Anyways i just want to create an off-line wireless intranet that will remain persistent even when all computers have left it. This doesnt seem to be possible with built-in windows tools, what program will let me do this?
View 2 Replies View RelatedI just moved in to a new place and have connected my Wireless router (WRT610N) to my switch located in the smart panel in the basement (SE2500). Plugging my ultrabook in to the wall confirms that the signal from the switch in the basement is being sent up, however if I plug my wireless router in to the jack and connect to the wireless router I have no internet access.
View 3 Replies View RelatedEvery time I turn on my PC I find I have lost internet access. I can fix this by going to Network Connections, disabling the connection, re-enabling the connection.But why does this happen? I notice the the following:1. When I look at the Network Connection it shows "Local Area Connection, Network 3, Unidentified network, Realtek PCIe....."2. When I re-enable the network AVG tells me the Firewall settings have changed - Directly Connected to Network has been set to Unidentified..... etc
View 2 Replies View RelatedI am setting up a network for a friend with children. He has a BT homehub and wants to block their access between certain hours. However by using access control on BT it tells you that you have been blocked which is no good as he cannot feign ignorance and pretend he doesn't know what to do (as his kids will pester him to fix it). He therefore wants to block their access more discreetly (as if the internet was generally timing out or messing up instead of actually displaying they have access control).Is there a way to block an individual's access on the router without blocking everybody either on a timer or manually done each time (thus if there isn't a way of automating it he can at least do this manually each time).
View 3 Replies View RelatedIm using d-link 855 router to block internet to certain machines, using access control within dlink and then in putting the ip for the right machines. But it seems the machines keep changing the IP adresses everything they boot thus getting internet access the next day.
View 14 Replies View RelatedI have a D-Link DGL-4500 Wireless N Gaming Router. If I create a mobile hotspot with my BB Bold 9900, can I somehow get my router to connect to it so I can provide bandwidth to my Ethernet dependent network devices?
View 2 Replies View RelatedI want to config a cisco 881 route to let a host jump to intranet web server when this host want to internet web server visit. All other server (email...) do not change.
View 1 Replies View RelatedBelkin N450 Router. I want to restrict Internet access completely but allow LAN access to a shared drive for a particular computer on my wireless network. I have gone into the web based set up page and under access controls have enabled and added this computer to the list. I have blocked http, https, ftp and nntp. I don't know if this is enough. The reason I am asking is that I am in Iraq right now and I want to allow my fellow team members access to the wireless for using viber on their iphones but one cat even though he has hardwired internet wants to continuously suck off my wireless for his computer to download stuff since I paid for faster internet. I am trying to do this quietly and still allow him access to the shared drives on the LAN. Sooooo If I block him just outright will he still have access to the drives or do I need to pick and choose like I did above and if I need to pick and choose did I miss anything other then pop3 email and imap?
View 2 Replies View RelatedAfter updating the firmware of my WRVS4400N from V 2.0.1.3 to 2.0.2.1 all traffic was blocked for all machines, even some not included in the list of PCs. As the log was showing that all traffic was blocked by access policies, I disabled the only rule I had (blocking access to some sites to some MAC address list) and everything worked fine.I tried creating a new, simpler rule but after activation it blocked again all traffic for all the LAN.After many trials, I decided to roll back to the previous V2.0.1.3 which solved this problem.
View 1 Replies View RelatedBasically we have 5 users in one of our offices and the internet works completely fine.However we cannot access the company Intranet. We receive 'The page cannot be displayed'.I have no idea why because all other sites work okay!Note: The Intranet can be accesed from home and libraries as I have checked aswel as 2 offices we have, everything works fine.It's just the one office and everything else works fine.
View 2 Replies View RelatedI have a small network running in my language academy which is causing me some issues. We have a server running Win XP with two folders, one for the teachers which is password protected and the other for the students which doesn't require a password. Up until two days it has been working well. However now the server keeps disconnecting from the internet quite randomly which stops us from connecting to the shared folders.
I've noticed that a caution icon appears next to the ethernet icon in the task bar when this problems occurs on the server. I have tried to right click and choose the repair option but it tell me that it cannot resolve the ip address. In some cases rebooting the server resolves the issues but in many case it doesn't.
I have an RV110W running firmware version 1.0.1.6 and I am trying to figure out how to enable website blocking in the Internet Access Policy screen. The Add Row button is grayed out in that section, as are the associated checkboxes.
Is there something else one needs to do to enable this feature?
If I set a name etc. at the top, and click save, it tells me "You must at least set a website blocking or PCs rule," so it is not the case that one has to save some information before continuing!
Here is where I want to go:
Windows server 2008 (providing DHCP and DNS) 192.168.89.1 on all
Cisco SG 300-20 (switch) 192.168.89.3
all Clients(15 x DHCP assigned IPs) connected to switch
WRT300N(192.168.89.2) connected to switch
Internet modem connected to WRT300N
To achieve this I need to disable DHCP on the WRT300N, since my server is providing DHCP.The issue I have is that when I disable DHCP at the WRT300N, I lose internet connection (connected to either switch or direclty to WRT300N).
My company has a peer to peer network of 10 personal computers without a server. Operating systems from Windows XP to Vista. I've recently installed a Cisco RV120W Wireless-N VPN Firewall. It's configured in DHCP Server Mode with printers/copiers that have static IPs below the DHCP range.
I'm having a problem with certain stations being used for personal networking, shopping, etc. during business hours. Consequently I would like to limit internet access on these stations. However, some internet access is required because of online database software that's an integral part of our business. I've been reading in the Administration Guide about URL Blocking. Would it be possible to give static IPs to certain stations and then limit their internet access to 1 or 2 specific websites?
FYI, I've read about the Trusted Domains and Blocked Keywords but cannot quite understand how to parley this into the solution I need.
My office pc internet ADSL router is connected on USB port and office intranet router is connected to LAN post throuh a CAT-5 cable.Both have different gateways.I have manually configured both USB and LAN but internet and intranet does nt work together.I am required to disable one connection to connect the othet one.I want to remotely connect to my office pc and work on intranet( oracle database) .i connect through team viewer but as internet is on,intranet does nt open.i tried to add intranet gateway throuh command line also but it did nt work.office pc is xp ..home pc is vista..
View 9 Replies View RelatedI just set up a new Cisco 300 Series Switch to replace an old switch on our network. We have probably 6 switches around our facility, all of them working fine (except for this one).
We have Windows SBS 2008. If I plug a PC directly into the switch that is NOT configured for SBS (in other words, it hasn't joined the domain) I have no problems accessing the internet. However if I connect PCs configured for SBS that have joined the domain to the switch, they can only access our intranet and not connect out to the internet.
The switch is currently configured for a static IP address and the client PCs are all dynamic.
I have made a site on the internet and an intranet site made in share point server 2003. How can i connect link my internet site to my intranet site.
View 1 Replies View RelatedWe have a home use WRT160N router linked to a PC desktop and two wireless laptops, Yesterday bought a new I-Phone, but could not link to my network (entered the security key many times). I accidentally connected to computer fix it firm that linked to my PC and wanted a large sum to fix the problem which he said was due to large number of temp?? internet files and once removed he would change the IP address of the desktop computer? Is this diagnosis logical and can I do it on my own. The router is definetely working - both laptops access the internet and I was recently able to hook up a Samsung Blu-Ray player using the same security code I used for the I-Phone.
View 1 Replies View RelatedFor the last week, I haven't been able to access my banking web site (Royal Bank in Canada). It doesn't matter which browser (FireFox, IE, Chrome) or computer (desktop, laptop) or even my cell (on WiFi).It must be the router (DIR-825, HW-B1, FW-2.07NA) since I can connect to the web site fine if I connect straight to the modem. (Also, if I turn off WiFi on my cell, I can connect to their web site but once I turn WiFi back on, it wont connect).I tried restoring to factory settings but that didn't work.I tried some of the suggestions here: http:[url].....
- Turn off ALL QoS or Disable Traffic Shaping. Advanced/QoS.
- Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual.
- Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking
- Ensure devices are set to auto obtain an IP address.
- Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall.
- Enable uPnP and Multi-cast Streaming under Advanced/Networking.
connect a network providing security pin
View 1 Replies View RelatedMy device is not providing wireless around the house. What should I do?
View 1 Replies View RelatedHow can I block and make sure no one has remote access to my computer
View 1 Replies View RelatedWe have three home systems connecting to the internet. Our cable/phone/internet provider upgraded their phone service to digital and installed a new modem/router combo (three months ago). Since then we've not been able to access MSN.com on our XP laptop and droid tablet but can access it on our windows 7 laptop. When the router settings are changed to "Bridged" and the router firewall is turned off, we can connect. We've changed the modem and the problem still continues. Our cable provider is stumped and so am I.
View 9 Replies View RelatedI use my WAP610N as access point (AP) in a network with a router.Firmware is up to date (1.0.0.4 build 7).After I connect my mobile phone the AP crashes after a few minutes. (The firmware of the mobile phone is also up to date.)Then it blocks the whole LAN until I disconnect the network cable from the AP. Then the rest of the network works just fine.Blocking means, that a computer connected to a lan port of the router can't ping anything nor has access to the internet anymore.I need to power off the WAP610N and after the restart it works again.
Also is there any way to debug or at least show some kind of log on the WAP610N? The web client seems to have no such features. Is there an additional URL with more commands? It seems that theres no telnet console either.
I wish to block some url that users have access through my LAN
Thats i wish to block icmp,access towards such sites, i wish to block icmp because dns will resolve the domain and they can access through ip address.
what i have in place is a cisco 2800 series routers
Like others I see on this board, we've got middle- and high-school age kids whose access to FB and other sites needs to be controlled/scheduled.
I thought the DIR-655 was great, in that it has features that, on the face of it, would seem to be ideal for blocking domains and restricting access.
My problem: I've never been able to get this to work.
I've set up schedules and created lists of domains that I want to limit access to according to the schedules, but the only constraint I've ever gotten to stick is blocking access completely to the router.
*None* of the schedule-based or website-based access controls have ever worked; I'll put the block in place to my daughter's computer's MAC address so she shouldn't be able to get to youtube or facebook, save, bounce the router, but then I go by her room and she's still busily chatting away online to her FB friends.
Based on similar posts I've seen on this forum, this may not be a unique problem.
So in a nutshell, this is what I want to do:
1) Block certain computers (identifiable by MAC address)
2) from being able to get to particular named domains (and any of their sub-domains)
3) according to a schedule that I can create and modify.
My preference would be to do this in the router, but again, responses I've seen here suggest that may not be possible.
After adding the below Extended Access-List Entry into my 1841 Router, access-list 102 permit ip host 192.168.1.1 any. I can access the Internet from this client but cannot connect to this client from another branch through vpn tunnels. I can access all other clients that do not have this access-list entry.
View 5 Replies View RelatedHow to successfully block access to Instagram with the ISA550W? Also, have you experienced any significant latency with URL filtering and AV protection enabled?
View 3 Replies View RelatedNVIDIA is blocking my internet connecting on only one of my computers and it has become somewhat of an urgent situation. I need to know how to get rid of it immediately. I have no idea what NVIDIA is. I was using my computer and going on the internet without a problem and 3 hours later this issue came about.
View 2 Replies View RelatedR11 is acting as host for testing purposes (pinging the DG's, and the ISP interfaces -> which are the lo0 address on the routers.I also have another question: How would I go about providing redundancy on the trunks from the Switch to the router?
View 2 Replies View Related
