Cisco Routers :: RV110W Internet Access Policy Website Blocking?
Sep 30, 2011
I have an RV110W running firmware version 1.0.1.6 and I am trying to figure out how to enable website blocking in the Internet Access Policy screen. The Add Row button is grayed out in that section, as are the associated checkboxes.
Is there something else one needs to do to enable this feature?
If I set a name etc. at the top, and click save, it tells me "You must at least set a website blocking or PCs rule," so it is not the case that one has to save some information before continuing!
View 10 Replies
ADVERTISEMENT
Apr 5, 2013
I have a RV110W that's been in service since Dec 2012. All Everything is working fine except every month or so the firewall starts blocking all inbound traffic. It does not respond to remote management access. If I reboot the firewall (pwr off/on) everything works correctly for the next month or so and then it begins blocking all inbound traffic again. Local access to the Internet and VPN tunneling are not affected. When it's working, all my rules and port forwarding work correctly.
View 2 Replies
View Related
Nov 23, 2012
My current network consists of 4 computers, 3 windows 7, 1 Windows Home Server 2003. All are wired to a gigabit unmanaged switch which is connected to a Netgear WNR200V2 router. The router is connected to the cable modem. I replaced the Netgear WNR2000v2 router with a Cisco RV110W firewall which i had preconfigured using another computer. The 3 Windows 7 PC's connected up with no problems. The WHS 2003 computer has no internet access. All 4 computers are visible on the lan and the 3 Win 7 PC can access the internet. I've tried accessing the internet by URL and IP from the WHS with no luck. All computers are assigned static IP's. I've checked all my settings, turned off the firewall in both the WHS and the RV110W with no change. If I plug the Netgear router inplace of the Cisco, all computers including the WHS have internet access. Has to be a setting somewhere in the Cisco router that's blocking the access. IP's for the 3 Win7's are 192.168.1.40, 41,42. Fot the WHS 192.168.1.76.
View 2 Replies
View Related
Apr 20, 2013
For the last week, I haven't been able to access my banking web site (Royal Bank in Canada). It doesn't matter which browser (FireFox, IE, Chrome) or computer (desktop, laptop) or even my cell (on WiFi).It must be the router (DIR-825, HW-B1, FW-2.07NA) since I can connect to the web site fine if I connect straight to the modem. (Also, if I turn off WiFi on my cell, I can connect to their web site but once I turn WiFi back on, it wont connect).I tried restoring to factory settings but that didn't work.I tried some of the suggestions here: http:[url].....
- Turn off ALL QoS or Disable Traffic Shaping. Advanced/QoS.
- Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual.
- Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking
- Ensure devices are set to auto obtain an IP address.
- Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall.
- Enable uPnP and Multi-cast Streaming under Advanced/Networking.
View 3 Replies
View Related
Feb 27, 2011
l have a web-site and when l go on it it comes up with blank page internet explorer cant load this page.l have phone talk talk and they cant fix it.l have a d-link router,its only my own web-site l cant access all other web-sites l can access.
View 2 Replies
View Related
Oct 16, 2010
I am trying to set up an access policy on my WRT400N. Whenever an access policy is enabled, all internet acess is completely blocked. This occurs irregardless of what the access policy is supposed to block. Even a blank access policy that allows access to everything and doesn't have any computers registered still blocks everything. How do I get it to stop completely blocking internet access?
View 9 Replies
View Related
Apr 14, 2012
Would there be some reason why I cannot change the Access Restriction to Allow? I also can't add anything into the Website Blocking by URL Address or the Website Blocking by Keyword. I can't type anything in the fields. I've tried rebooting, other browsers and even other computers but nothing seems to work.
View 14 Replies
View Related
Aug 8, 2011
After updating the firmware of my WRVS4400N from V 2.0.1.3 to 2.0.2.1 all traffic was blocked for all machines, even some not included in the list of PCs. As the log was showing that all traffic was blocked by access policies, I disabled the only rule I had (blocking access to some sites to some MAC address list) and everything worked fine.I tried creating a new, simpler rule but after activation it blocked again all traffic for all the LAN.After many trials, I decided to roll back to the previous V2.0.1.3 which solved this problem.
View 1 Replies
View Related
Jun 23, 2012
I am trying to create an IAP for a single computer based on it's MAC address. I want to block certain keywords and websites 24/7. When I setup the IAP as number 1, I add the MAC address of the computer in question. I then Select Allow and choose Everyday and 24 Hours. I type in the forbidden domains and click add after each one. I type in the keywords and click add after each one. After I click on Save, all of my computers on the network lose internet access.
I have WRVS4400N VPN Version 2, firmware version 2.0.2.1
View 2 Replies
View Related
Nov 16, 2012
Belkin N450 Router. I want to restrict Internet access completely but allow LAN access to a shared drive for a particular computer on my wireless network. I have gone into the web based set up page and under access controls have enabled and added this computer to the list. I have blocked http, https, ftp and nntp. I don't know if this is enough. The reason I am asking is that I am in Iraq right now and I want to allow my fellow team members access to the wireless for using viber on their iphones but one cat even though he has hardwired internet wants to continuously suck off my wireless for his computer to download stuff since I paid for faster internet. I am trying to do this quietly and still allow him access to the shared drives on the LAN. Sooooo If I block him just outright will he still have access to the drives or do I need to pick and choose like I did above and if I need to pick and choose did I miss anything other then pop3 email and imap?
View 2 Replies
View Related
Oct 3, 2011
We have an RVS-4000 router that we use as an Internet gateway on our school network. I am trying to set up an Internet Access Policy to block some specific websites by URL using a domain name. I set up the policy, and added a PC to the list using the mac address, and the blocking did not work. I went back to the list and added the IP address of the same PC, the policy still did not work to block the domain. I rebooted the router, cleared the Internet Temporary files and history on the PC, and the policy still does not work. It acts like it is going to block access to the website because it takes a long time, but it will eventually connect.
View 7 Replies
View Related
Feb 13, 2012
Is it possible to set up an RV110W to limit access to only specified websites according to a schedule? I can block access to specific sites using the Internet Access Policy settings under Firewall, but I can't figure out a successful way to block access to all sites except those specified. I also tried establishing access rules but that did not work either.
View 4 Replies
View Related
Apr 15, 2013
We have purchased an RV110W and I need to restrict internet access to the entire internet with the exception of 4 websites that are required for employees to do their jobs. I need to do this on 3 specific machines, not the entire network. I have looked at the internet access and schedule management pages of the router and just can seem to figure out how to do this.
View 8 Replies
View Related
Jan 28, 2012
Is there any way to block access to the router logon page from the wan? By simply going to the router's external WAN IP, the cisco logon screen shows up? I really think this not that safe and want to block it from showing up. I have looked at all the settings and don't seem to be able to find something that will keep that from happening.
View 1 Replies
View Related
Jan 1, 2013
I've encountered a problem when using PPTP VPN to access my network. I can connect in and able to ping the hosts connected to the RV110W. [code] On the local network, I am able to ping the hosts in 192.168.250.x from 192.168.251.x and vice versa.Static routes are configured to ensure that all networks are reachable.The problem comes when I tried to VPN (PPTP) in from a remote location using the Windows XP's built in default VPN dialer.When connected, I can ping all the hosts on 192.168.254.xxx segments, but when I tried to ping the hosts in 192.168.250.xxx and 192.168.251.xxx segments, I get a request timeout.
The routing table on the RV110W shows the gateway for 192.168.254.240 (the VPN IP address) as 0.0.0.0 and interface is WAN.What am I missing and how should I configure the RV110W so that I can access the other subnets through VPN?
View 6 Replies
View Related
Jul 7, 2012
I have an RV110W, there's internet access directly from my DSL modem, but when i connect my router it doesn't see the internet connection. I've changed the network cable and also confirmed the correct configuration in the router.
View 3 Replies
View Related
Nov 22, 2011
I saw a reference to release notes for firmware 1.1.0.9 (I think that was the number) for the RV110W but if I browse the firmware download page I only see 1.0.1.6 available for download. Is this available somewhere or am I confused and saw a reference to something else?
I have an installed RV110W at a client site that has to be rebooted about once a week since it stops allowing inbound access to mapped ports. For example, it stops forwarding connections on Port 25 to the client's e-mail server. I thought for a while there was a software issue with the e-mail server but after days of eliminating all other likely issues I rebooted the router and everything was fine. Now the problem recurs about once a week and rebooting the router always fixes it (this is week 3). Forwarding to ports 80, 443, and several others also stop working.
View 14 Replies
View Related
Jan 24, 2011
How do u lock your wirless router connection so other people. Can't get on it
View 2 Replies
View Related
Apr 5, 2011
I have a dir-655 a3 router that is blocking my website ip address.I could previously access this site until one day, without changing any router settings, it started blocking communication to my website. pings, tracerts, web browsers, everything simply times out. It resolves the IP address ok but doesn't go any further than that. I was on firmware 1.31 and have now upgraded to 1.35NA, but no luck. I have also tried resetting factory defaults to no avail. If i bypass the router and plug my computer straight into the modem, the site loads fine. so its definitely the router. I have tried this on a number of devices to make sure. It appears that for some reason the router is blocking that specific IP address as it is on a shared hosting and I can't access any other sites on the same IP address. Does the router check the IP address with any web service before returning the request?
View 4 Replies
View Related
Oct 4, 2011
I want to block a website timely using group policy on window server 2008.
View 1 Replies
View Related
Jun 23, 2012
I'm using a WRT160N v3 wireless router and it is somehow blocking my website. It works when connected directly to modem.
View 1 Replies
View Related
May 16, 2013
In Setup > Parental Control it is possible to set rules attached to specific website URLs. I want to block access from 1am to 6am.
However these rules only apply to websites URL. Is there a way to apply a rule to ALL websites at once? I tried to enter "*" or "*.*" in website URL field but it doesn't work.
View 1 Replies
View Related
Apr 28, 2013
How to successfully block access to Instagram with the ISA550W? Also, have you experienced any significant latency with URL filtering and AV protection enabled?
View 3 Replies
View Related
Jul 29, 2011
is there a way i can block a website from being viewed.i would like to do this from the setup page of my e1000 under website restrictions.
View 1 Replies
View Related
Feb 18, 2011
WAG320 allows website blocking, to enable this you can use a keyword. I would like to use this function to block anoying advert sites (in the same way I could with my Netgear DG834GT) - However the way this function has been implemented is less than ideal.
e.g. when a site is blocked by the router, the router does not return a response - this is great until that site forms only part of a web page that is permitted. What then happens is the web page takes forever to load as the responses have to timeout for the blocked components.
The way this function *should* have been implemented, is the router should return a blank response for each of the blocked sites. Netgear do this and it works a treat, they even put up a banner saying "Website blocked by Netgear".
This is such a simple feature, why has Cisco overlooked this and how do I go about raising a product enhancement ? I've been through the helpdesk which quite frankly is a farse, they asked me to reflash my firmware which surprisingly didn't resolve the issue - they then told me to send them the unit back because it must have a fault !?!? (and I have to pay for postage of course!) I explained the issue about 5 times, but the operator on the other end was just a script reader and I could not speak to an engineer - very poor.
View 2 Replies
View Related
Mar 19, 2012
I have a Linksys E2500 wireless router. It seems to be blocking a website (evernote.com). I cannot access this site from any of the computers/ devices in our house, whether they be connected by ethernet or wireless. However, when i move to a different network, I can connect to this site immediately from exactly the devices that do not connect in our house.
How can I determine how/if the router is somehow blocking this site? I have reset the router and upgraded the firmware. Same problem persists. I see nothing in the router settings that would be blocking this site, and I have certainly done nothing intentional in the settings to block this. We used to be able to connect to this with no problems, but all of a sudden, we are blocked.
View 5 Replies
View Related
Feb 16, 2012
We have had our router and remote computers set up with Quick VPN for over a year. We've had our share of problems but have worked around them.
Now, out of the blue, no one can connect to the VPN. I went in to try to do some 'troubleshooting' and the ONLY thing that allows our VPN connection to go through is to completely disable the RV016 firewall. We have too many remote users to actually start and stop the firewall everytime someone needs the VPN connection.
View 1 Replies
View Related
Dec 20, 2012
I have an ASA 5510 deployed and we are getting a tonne of port scanning traffic (who isn't these days) and ping traffic.The threat scanning thresholds seem a bit too high and was wondering if there is a way to use a Service Policy Rule to perform a Shun/Block of the hosts rather than the firewall simply blocking the request via the ACL and sending a reply.
In other words, if I do nothing, I know the ACL is protecting the resources but it is still replying to the client connection. I want the end result to be the same as a "Shun" where the connection is dropped and no reply is sent. how to employ Service Policy Rules to thwart Port Scanning and/or IP Spoofing?
View 2 Replies
View Related
Jun 14, 2010
I've been given the task of blocking access to certain websites, facebook, youtube, etc The router is the Cisco Linksys WRT120N
Ive entered the web addresses in the Website Blocking by URL Address boxes on the internet access policy page but it doesnt seem to work no matter how i do it.
Ive tried to deny internet access but that shuts of all internet access.
View 9 Replies
View Related
Mar 8, 2013
I would like to set up a monitoring/site blocking system where I work (owners request) to black sites like Facebook, YouTube, etc. Are there any decent, basic freeware ones out there?
View 1 Replies
View Related
Aug 4, 2011
I am tying to block a certain website on my WRT54GL Linksys router.I have put in MAC adresses on the Access Restrictions tab but its still not working.
View 3 Replies
View Related
Sep 12, 2009
Setting up website blocking. I have set up access restrictions for selected times and days but I also want to set up access restrictions for webistes. Perhaps I'm just not clear on how this is supposed to work - I created a policy called 'Site' and then enter the URL in the website blocking area. The options under the 'Access Restrictions' area are either 'Allow' or 'Deny' - intuitively one would assume the selection should be 'Deny' since this policy is to block access to specific URL's. However, if I click 'Deny' and then save, then the URL's I just entered are cleared. However, if I select 'Allow' then I am essentially giving 24hour access every day to my computers (but blocking the URLs), which then seems to go against the access restrictions I set up for selected times and days. Perhaps these two policies are mutually exclusive but it does not seem clear that it is.
View 2 Replies
View Related
Oct 25, 2011
used to be able to access this secure website [URL] prior to a firmware upgrade. Can no longer access. On Firmware Version: 3.0.2.01-tm. Assuming there's some default setting in the firewall?
View 2 Replies
View Related
