Cisco Routers :: WRVS4400N Internet Access Policies Blocking Everything

Aug 8, 2011

After updating the firmware of my WRVS4400N from V 2.0.1.3 to 2.0.2.1 all traffic was blocked for all machines, even some not included in the list of PCs. As the log was showing that all traffic was blocked by access policies, I disabled the only rule I had (blocking access to some sites to some MAC address list) and everything worked fine.I tried creating a new, simpler rule but after activation it blocked again all traffic for all the LAN.After many trials, I decided to roll back to the previous V2.0.1.3 which solved this problem.

View 1 Replies


ADVERTISEMENT

Cisco Routers :: WRVS4400N - VPN Blocking Windows Services

May 15, 2012

I need to access a shared folder over a VPN connection. Very simple host network: no Microsoft server, no AD. Just a WRVS4400N router and a peer-to-peer network.
 
Purchased a second WRVS4400N router to create VPN from SOHO and configured via VPN Setup Wizard.
 
When at the office, I can map a drive letter to a share on the other computer, as follows
 
net use f: \192.168.1.111MyShare /User:MYSELF mypass
 
However, when try same command over VPN, I receive the response:
 
System error 53 has occurred. The network path was not found.
 
I also cannot net view the other computer -- same error. However, I can successfully ping 192.168.1.111.
 
More info:
 
Routers have latest firmware.
 
Over VPN I cannot browse network via Windows Explorer (Win7 Network Neighborhood shows only my own PC. In the office I can see the other computer and the NAS appliance "NAS01").
 
I also cannot connect by entering \192.168.1.111MyShare into Windows Explorer's address bar (although I can do that successfully when at the office), or by choosing Map Network Drive from "Computer".
 
However, over VPN, I can get into NAS administration via https://192.168.1.3 and I can print to the office TCPIP printer (192.168.1.222)

View 4 Replies View Related

Cisco Routers :: WRVS4400N Internet Access Policy Not Working

Jun 23, 2012

I am trying to create an IAP for a single computer based on it's MAC address.  I want to block certain keywords and websites 24/7.  When I setup the IAP as number 1, I add the MAC address of the computer in question.  I then Select Allow and choose Everyday and 24 Hours.  I type in the forbidden domains and click add after each one.  I type in the keywords and click add after each one.  After I click on Save, all of my computers on the network lose internet access.
 
I have WRVS4400N VPN Version 2, firmware version 2.0.2.1

View 2 Replies View Related

Cisco Routers :: WRVS4400N Wireless Client Has No Internet Access

Jul 18, 2012

I recently purchased a WRVS4400N security router and have got a strange problem with it. I set it up as my main router and connected two computers (a desktop and a server) using DHCP. They both work fine, internet is as fast as it should be, no problems whatsoever. However, when I setup the Wifi SSID (whatever security options I use, same with open/wpa/wpa2) and connect my laptop to it. It is allocated a IP address and windows even says that there is an internet connection. As soon as I try to do anything though, I am dropped. Try to ping an outside server, failure and dropped. Open IE, failure and dropped. I cannot even access my local server connected by wire to the router.If I connect the laptop via a cable to the router everything works, and it continues to work when I unplug it. So this means that right now I walk over to the router and plug my laptop in for 3 seconds before I unplug it and then use the wifi for a couple of hours without any problem. But as soon as I try to turn on my wireless Logitech SqueezeBox or wireless printer, they fail and take my laptop with it..
 
I have:reset the router, used both firmware 2.0.2.1 and 2.0.1.3 and done a factory reset.Tried to move the router close to the laptop, no difference.

View 4 Replies View Related

Belkin Routers :: N450 - Blocking Internet But Allowing LAN Access?

Nov 16, 2012

Belkin N450 Router. I want to restrict Internet access completely but allow LAN access to a shared drive for a particular computer on my wireless network. I have gone into the web based set up page and under access controls have enabled and added this computer to the list. I have blocked http, https, ftp and nntp. I don't know if this is enough. The reason I am asking is that I am in Iraq right now and I want to allow my fellow team members access to the wireless for using viber on their iphones but one cat even though he has hardwired internet wants to continuously suck off my wireless for his computer to download stuff since I paid for faster internet. I am trying to do this quietly and still allow him access to the shared drives on the LAN. Sooooo If I block him just outright will he still have access to the drives or do I need to pick and choose like I did above and if I need to pick and choose did I miss anything other then pop3 email and imap?

View 2 Replies View Related

Cisco Routers :: RV110W Internet Access Policy Website Blocking?

Sep 30, 2011

I have an RV110W running firmware version 1.0.1.6 and I am trying to figure out how to enable website blocking in the Internet Access Policy screen. The Add Row button is grayed out in that section, as are the associated checkboxes.
 
Is there something else one needs to do to enable this feature?
 
If I set a name etc. at the top, and click save, it tells me "You must at least set a website blocking or PCs rule," so it is not the case that one has to save some information before continuing!

View 10 Replies View Related

Cisco WAN :: ASA5505 / Setting Access Policies Dual Internet Connections

Jun 7, 2011

I'm trying to set up a S2S VPN between two ASA5505 SP units running ASA Version 8.2(1). I've ordered additional ADSL2 lines to handle this traffic and I'm having troubles with the configuration for the additional PPPoE connection. Here is are extracts from my current config; First the interface vlans
 
!
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
 
[code]....

The result being that I can ping the OUTSIDE interface, but get no reply from the VPN interface. I've checked ADSL lines, they are up. The two PPPoE sessions are logged in and active. I can even see the ICMP packets hit the VPN interface, but there is no reply.

View 1 Replies View Related

Linksys Wireless Router :: E4200 V1 - Max Number Of Internet Access Policies Supported

May 16, 2012

I have an E4200 v1 wireless router, F/W 1.0.04.
 
Article ID 4041 [URL] says I can have up to 10 Internet Access Policies but the web based GUI has a pull down with only 5 possible.
 
Is 10 policies possible?  If so, how?

View 3 Replies View Related

Cisco Routers :: WRVS4400N V2 - DIAG Always On / No Access

Apr 21, 2012

After a few months of trouble-free ... the Cisco WRVS4400N V2 stopped working. i have tried to reset by holding the reset button for 30 seconds ... but nothing changes the red DIAG light remains on at all times
 
i have also tried two different versions of the Firmware Rescue Utility but all i get is "unable to scan"

View 1 Replies View Related

Cisco Routers :: Access LAN Resources Through WRVS4400n?

Apr 24, 2012

I am connected with qvpn, I can log in to the router bios remotely, but when I try to map the network drive from my remote location it does not work.I can detect the machine on the network, but it will not go further and tells me that "said IP was found but could not locate G". Does this mean it is behind a firewall on server side and that I need to create a rule to allow the incoming traffic? Or could it be something else.

View 1 Replies View Related

Cisco Routers :: Blocking Access To Instagram With ISA550W

Apr 28, 2013

How to successfully block access to Instagram with the ISA550W? Also, have you experienced any significant latency with URL filtering and AV protection enabled?

View 3 Replies View Related

Linksys Wireless Router :: WRVS4400N Firewall Blocking VPN Pass Through

Jul 13, 2011

I cannot connect via VPN PPTP (normal setup in windows xp), I have managed to connect over VPN direct connected to internet, through the router (WRVS4400n) if I turn off the firewall. But I cannot connect with the firewall enabled,One more thing, the device is on and I have enabled the passthrough (and 'Multicast Passthrough' in firewall basic settings) for all available options where one of the options is PPTP.

View 1 Replies View Related

Cisco Routers :: WRVS4400N - Access VPN When Assigned By DHCP?

Jul 6, 2012

My ip address of my WRVS4400N changes every so often. when i use the ip assigned to connect remotely, it works until the ip is re-assigned through dhcp. I know there is a way around this bu ysing a name or something. I just don't know how to set that up.

View 1 Replies View Related

Cisco Routers :: WRVS4400n Port Forwarding (SSH Access)

Apr 23, 2012

I have a WRVS4400n and a CentOS server that I need to enable a SSH access to from WAN. I created a single port forward rule to open port 22 and forward to server (which address is 192.168.41.3) However ssh connect doesn't happen, the command "ssh user@{external_IP}" times out after 20 seconds. If I connect my server directly to modem through outside interface - I have no problems connecting to it. Once it's behind router - no luck. I even added same rule for UDP, not sure if it's needed, but it definitely didn't hepl. The router is on firmware version 2.0.1.3, version on a bottom is 2.

View 4 Replies View Related

Cisco Routers :: IPSec Access Control On WRVS4400N?

Oct 7, 2011

I have a WRVS4400N, and need to apply access control to an IPSec tunnel that terminates at a client site, but can't seem to make the device comply.
 
I can configure ACLs on their device for the LAN to restrict packets coming back into my network, and can restrict packets outbound frm my LAN but that is hardly a secure method of doing this in my opinion.

View 1 Replies View Related

Cisco Routers :: RV016 Firewall Is Blocking QuickVPN Access?

Feb 16, 2012

We have had our router and remote computers set up with Quick VPN for over a year. We've had our share of problems but have worked around them.
 
Now, out of the blue, no one can connect to the VPN. I went in to try to do some 'troubleshooting' and the ONLY thing that allows our VPN connection to go through is to completely disable the RV016 firewall. We have too many remote users to actually start and stop the firewall everytime someone needs the VPN connection.

View 1 Replies View Related

Cisco Routers :: WRVS4400N - Unable To Access Admin Console

Jan 18, 2013

Although I hasten to point out that I have owned and used an 'IBM' type PC since 1988 and have always managed to get things configured correctly until NOW!
 
Apart from the last time I tried to use a Linksys product. I had the WRVS4400N recommended to us by a friend as we run a small FTP server to share promotional materials amongst sales operatives around the world, wanted to protect it from intrusion and was told that a Cisco Linksys product with a VPN was the way to go.
 
I duly purchased a WRVS440N and have been trying to log into the admin console via both browsers (IE9 and Google Chrome) that are installed on a laptop running Win7 which in turn is the only thing connected to the stated device via ethernet port 1... I have tried accessing it via http://192.168.1.1 and have even tried a suggestion from another forum to try https://192.168.1.1 - this only results in my being told that the address does not have a trusted certificate and I even tried every suggested workaround...
 
I have tried all kinds of reset periods from 10 seconds to a minute, both hot and cold and each time the result is the same - I type in 'admin' and 'admin' in the appropriate boxes and the dialogue box continues to return to the browser window with empty fields...
 
The shame is that I have managed to re-flash a BT Voyager 190 ethernet modem successfully with DynaLink v3.29a firmware (which allows it to be used with any ISP besides AOL [for whom this modem was solely intended]) and can set it up as a DHCP server, non-DHCP with a single link to another server or non-DHCP and no link.... The point is the modem works... I'm using it right now to type this! We have a single static IP from our ISP and the BT modem is working just fine (as is the TP-Link wireless modem/router that the WRVS4400N was intended to replace)... there are other options in it's firmware for port forwarding, etc and I'm convinced that it wil be adequate for use in conjunction with the WRVS4400N.
 
I have to concede that the WRVS4400N was not sold to us as NIB; it was sold as re-conditioned and was shipped to or via Ingram Micro Distribution from Cisco Systems, Veldweg 3, Herkenbosch 6075 NL (Holland) via UPS on or about the 31st of July, 2012... there is a shipping label on the original packaging that tells me that so it has in fact been back to Cisco at some point and for some reason.

View 3 Replies View Related

Cisco Routers :: Wireless Clients On WRVS4400n Cannot Access Server

Mar 10, 2012

When clients connect wirelessly to the WRVS4400N they successfully get a DHCP address from the Windows 2008 server.  After they have the address they can no longer access the server.  It cannot be pinged, no drives can be mapped and internet access fails because the same server is running DNS.  The WRVS4400N is setup for DCHP relay to the server.  Wired clients do not have this problem.  Wireless clients that connect to a secondary WAP on the same LAN also do not experience this problem.  I have updated the router to the latest firmware version, reset it to factory defaults and reconfigured from scratch.  Turning the server firewall off has not made any difference either.  I have been able to bypass the internet problem by adding a second external DNS server in the DHCP scope options. 

View 5 Replies View Related

AVG Is Blocking Internet Access?

Aug 1, 2011

Every time I turn on my PC I find I have lost internet access. I can fix this by going to Network Connections, disabling the connection, re-enabling the connection.But why does this happen? I notice the the following:1. When I look at the Network Connection it shows "Local Area Connection, Network 3, Unidentified network, Realtek PCIe....."2. When I re-enable the network AVG tells me the Firewall settings have changed - Directly Connected to Network has been set to Unidentified..... etc

View 2 Replies View Related

Cisco Routers :: WRVS4400N Block All Internet Outgoing

Oct 16, 2011

When i try to active the Internet Access Police with Website Blocking by Keyword, the router WRVS4400N block any access to internet, the Access Restriction by time is disable. How i can active this feature without restrict all the access?

View 1 Replies View Related

Cisco Routers :: Sending All Traffic To VPN And Blocking Internet On Other End - RV042

Dec 28, 2012

I wonder if I can have a RV042 VPN Tunnel to a RV082, and in the RV082 block all traffic to the internet that comes form the PCs that are behind the RV042.
 
Remote PC -> RV042 -> VPN -> RV082 -> RV082 Firewall (block internet traffice, allow intranet traffic)

View 3 Replies View Related

Blocking Individuals Internet Access?

May 21, 2012

I am setting up a network for a friend with children. He has a BT homehub and wants to block their access between certain hours. However by using access control on BT it tells you that you have been blocked which is no good as he cannot feign ignorance and pretend he doesn't know what to do (as his kids will pester him to fix it). He therefore wants to block their access more discreetly (as if the internet was generally timing out or messing up instead of actually displaying they have access control).Is there a way to block an individual's access on the router without blocking everybody either on a timer or manually done each time (thus if there isn't a way of automating it he can at least do this manually each time).

View 3 Replies View Related

Cisco Routers :: WRVS4400N Slowing Down 100Mb Internet Connection

Jun 4, 2012

I have a Cisco WRVS4400N on the latest firmware and I have just had my Virgin internet connection upgraded to the 100Mb. Once i thought it was upgraded i checked with a broadband speed test and it came back as 15Mb download and 5Mb upload. Before i rang Virgin i thought i'd check with a direct connection from my pc straight to the modem. Ran the speed test and it came back as 100Mb download and 5Mb upload. I thought the best thing to do is restore my settings back to factory and its still the same.

View 7 Replies View Related

Cisco Routers :: Linksys WRVS4400N V1.1.13 Slows Down Internet Speed By 50%?

Dec 10, 2012

Recently I upgraded my Internet speed at the ISP from 10Mbps to 25Mbps and the problem is that I am measuring only 15Mbps using [URL]On the day when the tech came out to install the new DSL modem, he noticed the difference and as part of troubleshooting, he bypassed the Linksys router and voila the net speed measured 25Mbps using speedtest.net.So, why my Linksys WRVS4400N V1.1.13 acts like a bottleneck in this case? I didn't have this problem at the speed of 10Mbps. The upload speed is OK, it is 5Mbs with or without the DSL modem.

View 2 Replies View Related

Cisco Routers :: WRVS4400N Intermittently Drops Internet Connection?

Oct 18, 2011

For eight months we have not had any problems with our new WRVS4400N (V2.0.2.1) connected to a Verizon/Westell 6500 to provide DSL internet for our network with DHCP on our server...  No changes have been made to the router or modem since initial setup; but, then it started -- Our internet connection would drop intermittently.  Sometimes every 5 or 10 minutes - sometimes every hour.  Verizon has tested the lines which came up ok, then they sent a tech who changed the wire pair coming into the building for the DSL line and retested the lines which again came up ok, then they provided us with a new modem (now a Verizon/Westell 7500).  After all that, the DSL still connects then disconnects intermittently.  I am now wondering if the issue lies with the WRVS4400N.

View 2 Replies View Related

Providing Intranet Access While Blocking Internet?

Feb 20, 2012

Small business with 4 computers networked together and sharing coommon software programs and files. Need to block one of the computers access to the Internet whille allowing the other 3 access to the Internet. Is this possible/ If so How?

View 3 Replies View Related

D-Link 855 Router - Blocking Internet Access?

Aug 6, 2012

Im using d-link 855 router to block internet to certain machines, using access control within dlink and then in putting the ip for the right machines. But it seems the machines keep changing the IP adresses everything they boot thus getting internet access the next day.

View 14 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.2 Access Policies

Mar 15, 2012

We have two device groups ASAs for VPN accessWireless ControllersThere are 2 AAA devices in each group.

We have 4 Identity Stores

ACS Internal User Store - This is used for external suppliers doing SSL VPN on ASAsExternal Radius server - this is a two factor authentication server that in turn looks up our AD and its own internal token database. This is used for IPSEC VPN access for internal employees.We have mapped AD groups - this is used for allowing access for wireless users.LDAP group mapped from other AD domain - used for allowing wireless access to an associated organisation. 
Our requirements

We need to create a rule for the VPN access that first of all looks through the ACS internal store - if a user is not found there then it checks the external Radius server. If no users are found there then access is denied.We needto create a similar rule for wireless users so that it will check AD - if a user is not found there then it checks LDAP. If no users are found then access is denied.

View 2 Replies View Related

Cisco :: ACS 5.1 Access Policies For Multiple EAP Types?

Mar 3, 2011

I am trying to configure a Unified Wireless solutions with ACS 5.1 and am having trouble with the access policies. We have corporate laptops authenticating via PEAP and 7921 phones authenticating using EAP-FAST.
 
I have one access service configured to allow PEAP and authenticate against AD and another access service configured to allow EAP-FAST and authenticate the 7921 phones against the "internal user" database.
 
I have configured 2 service selection rules. Each one points to one of the access services. The only condition I have currently configured is the "protocol" field to be RADIUS. Because both the 7921 phones and the client laptops are generating RADIUS requests I can only have one EAP type working depending which rule is at the top. Because the RADIUS protocol field is always matched, requests never get past the first rule.
 
how I modify the rule to be able to distinguis between VoIP handsets on one WLAN and client laaptops on another so that correct access policy is used for each device?

View 5 Replies View Related

Cisco VPN :: ASA 8.2.x - Control Access To Different Group Policies On VPN? 

Mar 22, 2010

Using Microsoft IAS as the auth server, how do I get the ASA (v.8.2.1) to take different user groups defined in AD, and control access to different group policies on the VPN?  We're setting up the ASA for many different vendors, and need to control access for each vendor with different policy.

For example, Vendor one is in AD group Vendor1 and will only be permitted access to a specific group of defined IPs in our network. Vendor two is in AD group Vendor2 and will only be permitted access to a different group of defined IPs in our network from Vendor1.

View 12 Replies View Related

Cisco WAN :: WRVS4400N - Can No Longer Access Internet Or Login On The Network

Oct 17, 2011

I recently bought a new Cisco WRVS4400N router for our network which has 19 computers connected to a 24 port switch.  We are currently using a D-Link router and are upgrading to the Cisco router.  The problem I am having is as soon as I connect one of our servers or the 24 port switch to the Cisco router I can no longer access the internet or login on the network, I also cannot access the routers setup from either server.  If I connect the router to just a stand alone computer I can access the setup and change things but as soon as I connect the server or 24 port switch everything dies (all lights are still green on the router though so everything is connected).

View 1 Replies View Related

Cisco Routers :: RV016 Firewall Policies Via Telnet (rules / Chains / Etc)

Nov 3, 2011

I am having some troubles finding information about how to configure firewall policies (rules, chains, etc.) via telnet on a RV016. The reason for that is that i keep getting some log entries "connection refused - policy violation" and "blocked" even with my firewall wide open (only allow rules on all interfaces, SPI and block wan request disabled, multicast and https enabled, etc.... ). Also, with these exact same rules, i can only connect via PPTP with the firewall disabled. The minute i tick the enable option the tunnel never gets to authentication phase. I then started reading OpenRG manual and many things are quite similar, but some other entries are missing from that manual (maybe some changes made by cisco?). I am trying to figure out some service ids, chains (e.g. the rv016 has some rules redirecting to chains 10, 100, 200 but i can not find them anywhere), and so on.  I have only one rv016 and about 60 connections to it so i can not experiment that much without having the whole company on my neck with internet problems.

View 2 Replies View Related

Cisco Routers :: SRP547W Multiple IPSec Policies Through Single IKE Policy

Apr 7, 2012

I am trying to create a VPN between an SRP547W and a Cisco IOS router, in this case a UC540.I am running firmware 1.2.4 (003) Jan 11 2012. Now I can do this with an SRP527W and many other routers successfully. Including other IOS routers 1801, 1941 etc.
 
The issue I have is on the SRP547W I cannot create more than one IPSec Policy through a single IKE policy. I require this to route multiple v lans to our remote site. When I try to add an additional IPSec Policy I am give the error "IKE policy has been used by other IPSec policy"
 
This is possible to do on the SRP527W with latest firmware. I have tried rolling back to earlier firmware but instead I am given an error about overlap. Latest release note for this firmware suggest this issue was already resolved.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved