How To Create A Wireless Intranet Without Internet Access
Jun 12, 2011
I'm trying to connect my portables to a central server that has all my music on it, all located in the same area. I've tried ad-hoc but it limits me to using the preset shared folders only, and its frustrating to use as it breaks once a computer leaves the network.Anyways i just want to create an off-line wireless intranet that will remain persistent even when all computers have left it. This doesnt seem to be possible with built-in windows tools, what program will let me do this?
View 2 Replies
ADVERTISEMENT
Apr 12, 2011
I'm looking at doing an intranet project at work. What i want is to have one main machine that will have a forum and website on (probably Windows IIS on Windows 7). Then i want to have approximately 10 other users on laptops that can connect to my intranet forum and site via "wireless" connection, but at the same time none of those 10 laptops or my main machine having any "internet" access. Is this possible and if so how
View 5 Replies
View Related
Mar 29, 2011
I am trying to setup internet access and intranet access using two cards per PC. I don't have sever software and I want to be able to share files between several machines. I have two routers. One that connects to cable modem and one that connects to intranet side. I have assigned different static ip addresses to both cards.
View 6 Replies
View Related
Feb 20, 2012
Small business with 4 computers networked together and sharing coommon software programs and files. Need to block one of the computers access to the Internet whille allowing the other 3 access to the Internet. Is this possible/ If so How?
View 3 Replies
View Related
Dec 31, 2012
I want to config a cisco 881 route to let a host jump to intranet web server when this host want to internet web server visit. All other server (email...) do not change.
View 1 Replies
View Related
Nov 15, 2011
Basically we have 5 users in one of our offices and the internet works completely fine.However we cannot access the company Intranet. We receive 'The page cannot be displayed'.I have no idea why because all other sites work okay!Note: The Intranet can be accesed from home and libraries as I have checked aswel as 2 offices we have, everything works fine.It's just the one office and everything else works fine.
View 2 Replies
View Related
Aug 30, 2011
My office pc internet ADSL router is connected on USB port and office intranet router is connected to LAN post throuh a CAT-5 cable.Both have different gateways.I have manually configured both USB and LAN but internet and intranet does nt work together.I am required to disable one connection to connect the othet one.I want to remotely connect to my office pc and work on intranet( oracle database) .i connect through team viewer but as internet is on,intranet does nt open.i tried to add intranet gateway throuh command line also but it did nt work.office pc is xp ..home pc is vista..
View 9 Replies
View Related
Dec 29, 2011
I just set up a new Cisco 300 Series Switch to replace an old switch on our network. We have probably 6 switches around our facility, all of them working fine (except for this one).
We have Windows SBS 2008. If I plug a PC directly into the switch that is NOT configured for SBS (in other words, it hasn't joined the domain) I have no problems accessing the internet. However if I connect PCs configured for SBS that have joined the domain to the switch, they can only access our intranet and not connect out to the internet.
The switch is currently configured for a static IP address and the client PCs are all dynamic.
View 13 Replies
View Related
Sep 7, 2011
I have made a site on the internet and an intranet site made in share point server 2003. How can i connect link my internet site to my intranet site.
View 1 Replies
View Related
Dec 27, 2011
It says I'm connected, but when I try to get online, it says I'm on the local intranet and "THIS PAGE CANNOT BE DISPLAYED". How can I get it to the internet instead of local intranet?
View 3 Replies
View Related
Apr 18, 2011
There is no internet support from one of the ISP providers in my local town so i need to:-Create wireless LAN to share resources between all the connected PCs without needing to internet connection.-take in to consideration privacy and security for every individual PC.
View 3 Replies
View Related
Mar 3, 2013
i cant create dlink acess point password , if I am going 192.168.0.50 then showing error massages , I am check two three computer , then the same error coming
View 1 Replies
View Related
May 9, 2012
I have a cisco 877 configured foir lan to lan between sites A and B. I have used vlan 1 but looks like i have to bvi1 if i need to use the wireless,what is the difference between bvi and vlan. if i wanted users on the same vlan and wireless what would be the base config ? at the moment all corporate traffic goes to site A and other traffic goes to internet. now would i be able to create two ssid, one for corporate to access corporate subnets and the other for guest access alone where the traffic goes out to the internet.
View 1 Replies
View Related
Mar 5, 2013
Region : United Kingdom
Model : TL-WR702N
Hardware Version : V4.20.0
Firmware Version :
ISP :
Using a TL-WR702N router as a wireless access point on a narrow-boat. How to print from my i Pad and iPhone to a printer on my narrow-boat, on the UK inland waterways. The Apple store geniuses seem to contradict each other on how it can be done, if at all. I have an i Pad and iPhone and would like to print photos, documents and the occasional web page to my Canon MG4250 printer, which has Air print capability, while I am cruising. I don't have a PC on the boat and of course there is no telephone or broadband connection (other than via 3G on my iPhone). In other words, I want to link my printer to a router, then when required, wireless connect to the router to print from my Apple devices.
Will the TP Link TL-WR702N 150Mbps Wireless N Nano Router allow me to do this? Reading the product information, this nano router looks very flexible, but all five modes mentioned seem to utilize an internet connection. I only have an internet connection via 3G on my iPhone, and can also tether the i Pad to the iPhone's WiFi hotspot to give internet connection on the i Pad. Would I have to use this internet connection somehow, or can I just connect the Apple devices to the printer via the WiFi on the nano router?
In effect I want to create a wireless access point for printing, without any, or at least a regular, internet connection.
View 4 Replies
View Related
Mar 6, 2012
I have a working wired network and really all I want to do is set up my DIR-655 on it so that it provides internet only for wireless users, but doesn't allow access to the rest of the local network. I though that's what the Guest network would do, but when I connect to that I can still type in local IP addresses and get to those devices.
"Enable Routing Between Zones" is unchecked in the Guest Zone settings.
View 3 Replies
View Related
Oct 6, 2012
how we can make guest access to our network like hotels by using our WISM v 7.0.220 and wireless control system and ACS ?
View 1 Replies
View Related
May 7, 2012
it's possible to implement that on any Cisco Wireless Devices, so All I need is create one wireless account with timer for 1 hour, so SSID as guest without any password and once you connected it works only for 1 hour then disconnects and you can't connect again. Then create second account where you can browse timelessly but you need a password to connect there.
1. Is it possible to do that using one or two SSID, or password changes?
2. Is it possible to do that on Wireless controller WLC2100 series, or AP1000, AP1100 series, or AP500 series?
View 7 Replies
View Related
Nov 6, 2012
how do i connect to internet>? I have a wifi modem connected. With a browser?
View 1 Replies
View Related
Sep 18, 2012
I am trying to connect my wireless router into the wired ethernet so that i can create a private wireless network for our room. The thing is, my school realizes what you are trying to do and your browser only displays "you are attempting to access (college.edu) network on an unauthorized wireless network. My friend has made it work by turning off the dhcp with his airport extreme and setting it to create new network instead of extend, but after I turn off dhcp I dont know what i should put in for a static ip/ dns/ what to do at all. I can look at all the connections with ipconfig/all , I just don't know the magic things to put in after turning off dhcp to make this work. I have a netgear wireless wndr 3400 n600 router.
View 6 Replies
View Related
May 7, 2012
I have a WAG200G as my ADSL modem and wireless access point. I would like to build two small wired networks that are remote from the location of the wireless access point (i.e. where my telephone line comes in) so that I can connect several network cabled devices in each location (e.g. NAS drive, TV, games consoles etc). I cannot run network cables to these locaations but believe that I can bridge them via the wireless. At a pinch, I could have only one cabled sub-network but would prefer two.
View 4 Replies
View Related
Feb 11, 2011
I have set VPN clientr connection in windows 7 . Afetr connecting to the VPN I am not able to connect my intranet company sites, but I am able to connect the internet sites. I have made host entries in host files. All the other sites are working fine.
View 1 Replies
View Related
Mar 4, 2011
How to create a password to access one pc to another pc. Like i have 3 pc it is connecting throw switch. ip addresss is 192.168.1.1 192.168.1.2 192.168.1.3 i want access from 192.168.1.1 to \192.168.1.2 like this here i want to create login password and how to remove password
View 10 Replies
View Related
Mar 29, 2011
You are appointed as a system administrator for a large company which has its own computer intranet hosting 150 workstations and around the same number of users. Write few points explaining the roles you would expect to take on as part of your new employment in terms.
View 2 Replies
View Related
Jan 22, 2011
I have been stuck in a strange problems which happens occasionally--but too often to be ignored.I have a Windows 2003 Server running as a virtual machine via MS Virtual PC 2007. The host machine is a Windows 7 Home Premium 64-bit. This setup used to run fine where I had no issues accessing the guest OS (Win 2003). My development environment is Visual Studio 2005 and 2010 based, both running on the host machine.Some days ago I started working on a ASP .NET application which had a lots of files on the guest OS. That would cause the dreaded 'Network Bios Limit Reached' error in VS. So tweaked a few Registry keys on both host and guest and that problem went away. But then I started to get a new kind of problem: Occasionally, within VS 2010, I could not save files and that would be so bad that the entire guest OS cannot be browsed (but can be seen in the Network Neighborhood and be pinged as well).I have undone all Registry changes in both guest and host but I still see this problem. Only the virtual machine running Win 2003 is occasionally un-browseable but still ping-able by other intranet computers: Win xp, vista, Win 7 but cannot browse until the guest win 2003 is re-started.Is it some kind of network buffer being too full? So far I only see this problem when working inside Visual Studio 2010 but it could be happening elsewhere. The guest win 2003 is assigned a static ip of 192.168.1.7 by the router, btw.
View 8 Replies
View Related
Aug 23, 2011
I am trying to put a link on our Intranet page to several documents that are updated daily by specific users. These users save the documents in their department folders, which are only acessible by their department and I.T. (me). Right now I have a .bat file that checks every half hour of the work day to see if it has been updated, if it has it will be moved to a location in the Intranet folder which will update the link on the Intranet. While users can view the Intranet, they do not have access to view the files or folders that house the Intranet html coding etc.This option works but our users are complaining that it isn't instantaneous. Any ideas how I can do this on a network while keeping everyone's security in place and not give them extra rights to the Intranet folders?
View 3 Replies
View Related
Feb 7, 2011
create a new proxy to access Facebook in school.
View 1 Replies
View Related
Mar 2, 2011
how to create a password to access one pc to another pc .like i have 3 pc it is connecting throw switch .ip addresss is 192.168.1.1,192.168.1.2, 192.168.1.3 i want access from 192.168.1.1 to \192.168.1.2 like this here i want to create login password and how to remove password
View 1 Replies
View Related
Aug 7, 2012
Differences between using an Apache server on a regular laptop vs. a whole operating system like Windows Server 2008. I'd like to setup an intranet complete with an internal domain name. Is this possible with Apache or do you have to use a complete server operating system like Windows server 2008?
View 1 Replies
View Related
Jan 3, 2012
I have a small problem: I succeeded in etablishing a VPN connection to my RV110W from Internet. When I'm connected with my VPN connection and surf on the web, my public IP address is my home router's one. However, I can't join my home computers.My VPN adress is 10.0.0.10.Ping to 10.0.0.1 and 10.10.10.1 (RV110W adresses both) works, but I can't ping to 10.10.10.101 (home computer). I tried with all my firewalls inactive.Did I miss something on my RV110W configuration ?
View 6 Replies
View Related
Jan 4, 2012
i m working in a domain environment . for example my domain name is testdomain.com. i create a shared folder on it and give everyone a read control over it. then i create a folder in that shared folder with name of test. i also create a user with name test. i give full control to test user over test folder. now when i access the test folder from network with username test. i can read that folder but when i create the file or folder in the test folder it will show the following error..."unable to create a folder"new folder" access is denied.
View 1 Replies
View Related
Feb 21, 2013
we have a cisco asa 5505 and it working great .i want to create web server that only selected public ip address can access.
View 3 Replies
View Related
Apr 7, 2011
Last time, i´ve implemented a Remote Access VPN to my network with ASA 5510 I´ve allowed to my VPN an acces to all my Internal LAn But i want to configure a group of vpn in the CLI for have different group of user which can access to different server or different network on my LAN.
Example : informatique group------access to 10.70.5.X Network
Consultor group -------- access to 10.70.10.X Network
I need to know how can i do that , and if you can give me some eg script for complete this Here is my configuration :
ASA Version 8.0(2)!hostname ASA-Vidruldomain-name vidrul-ao.comenable password 8Ry2YjIyt7RRXU24 encryptednamesdns-guard!interface Ethernet0/0 nameif outside security-level 0 ip address X.X.X.X 255.255.255.X!interface Ethernet0/1 nameif inside security-level 100 ip address X.X.X.X 255.255.255.X!interface Ethernet0/2 shutdown no nameif no security-level no ip address!interface Ethernet0/3 shutdown no nameif no security-level no ip address!interface Management0/0 description Port_Device_Management nameif Management security-level 99 ip address X.X.X.X 255.255.255.X management-only!passwd 2KFQnbNIdI.2KYOU encryptedftp mode passivedns server-group DefaultDNS domain-name vidrul-ao.comaccess-list 100 extended
[code]....
View 2 Replies
View Related
Mar 10, 2012
I should set up a network for a little enterprise.The requirements can be summarized as follows:
- All the "business" softwares have to be stored in a single computer (let's call it "the server"). The other computers (in this case there should be at most 2 or 3 computers) can execute these softwares through the server. So there are no local copies of those softwares on clients, only on the server.
- The main computer (the server) shares also a printer.
- All the computers in the network, are interconnected through a single wi-fi modem/router. Some of them are connected through the wi-fi interface and others through an ethernet cable.
the server, in order to perform some special procedures, has to connect to a special modem which connects it to a remote private network. In order to do so, the server disconnects from the local enterprise network because Windows does not allow me to stay connected to more than one network at the same time.The remote private network does not require to disconnect from any other network, it's just a constraint imposed by Windows.In the meantime, clients are not able to execute softwares anymore and cannot print anything.when the server is connected to the private network, it still needs to execute the "business" softwares.
Is it possible to keep the server connected to both the networks without denying the access to softwares, data and printers to anyone? If yes, how?If not, how can I design the topology of the network in order to share softwares and other data among all the computers (server and clients)? It's important that when the server connects to the private network every computer (including the server itself) can still access softwares, data and printers.
View 1 Replies
View Related
