Cisco :: Create Timer For Wireless Access On WLC2100 / AP1000 / AP1100 / AP500
May 7, 2012
it's possible to implement that on any Cisco Wireless Devices, so All I need is create one wireless account with timer for 1 hour, so SSID as guest without any password and once you connected it works only for 1 hour then disconnects and you can't connect again. Then create second account where you can browse timelessly but you need a password to connect there.
1. Is it possible to do that using one or two SSID, or password changes?
2. Is it possible to do that on Wireless controller WLC2100 series, or AP1000, AP1100 series, or AP500 series?
View 7 Replies
ADVERTISEMENT
Oct 7, 2011
I am recently engaged by a client to convert his network to wireless network. My client operates in an office with 8 floors and also concrete walls. On making my research i came about your product Cisco AP500 Series Wireless Access Points.I will like to know if this product can work for my client perfectly or I will need to get other enhancement to make it work at its optimum.
View 2 Replies
View Related
Mar 24, 2013
Our offcie use WLC2100 Series controller with AIR-LAP1031 and successfully join and running. Now i am trying to replace one ap with AIR-LAP1041N and join with WLC, but i can't and below the error message generate:
[code]....
View 2 Replies
View Related
Oct 9, 2012
I've found that Android devices (smartphones for sure, and perhaps other devices, like Windows Vista/XP pc's with some Atheros wi-fi adapters) can't connect to our eduroam network (WPA2 Enterprise) if the Access Points (all from Cisco) also have open SSID's configured in it. Once I protect the open networks with, for instance, WPA-PSK, the Android devices immediatly get connected to the eduroam. Is there any fix that can be applied to the Access Points. Below there's a list fo AP models and IOS version we have running. I may mention that this problem doesn't occur with Access Points from other manufacturers like, for instance, Meru Networks.
In the AP's event log appears the folowing:
"Packet to client 0026.3778.081f reached max retries, removing the client"
The steps to mitigate the problem above were applied, but with no results.
PS: The Android versions may vary with the same symptom.
Device types: AP 1100; AP 1130; AP1140;AP1210;AP1250
View 19 Replies
View Related
Sep 20, 2012
my hardware set-up : 2x AP 1100 series, 2x AP1131AG (not connected to a Cisco Switch)...all with the latest Cisco iOS
What i want to do is connect these APs and broadcast the same SSID (e.g Aironet and NOT Aironet1,Aironet2..etc). Doing that, a user with a laptop can roam between these APs and won't have to re-enter the password of the SSID every time he changes AP. I would also like the encryption to be with a 128bit password key. From what i have read, i need a local authenticator to do what (Something called Local Radius Server).
View 11 Replies
View Related
Sep 7, 2012
upgrading 300 Aironet 1100 series i.e. 1121 to newly bought WLC.Problem is 1100 are using SSC cert that I must do " debug pm pki enable " on each of 300 AP upgrading to extract its key-hash then copy to Security>AAA>AP Policy and repeat for 300 times. It is the impossible task.What would you recommend us to do the any other methods to achive the same goal?
View 2 Replies
View Related
Sep 18, 2012
our customer in France, it deploy access points AIR-LAP1142K-E-K9 in france but also in morocco.from Cisco's documentation and Azlan, it is not possible to purchase AP AIR-LAP1142K-E-K9 to the customer in Morocco. but it's possible only the item AIR-LAP1142K-I-K9.We have an issue: the WLC (version 7-0-220-0) is in france country code (FR) and regulatory domain (-E) and APs are in morocco.the regulatory domain (-I) is not supported in country (FR ), the interface 802.11a is not supported.
1/ is it possible to activate 802.11a on AIR-LAP1142K-I-K9 ? how can it be done ?
2/ or we must make an exchange AIR-LAP1142K-I-K9 by AIR-LAP1142K-E-K9 ?
3/ the morocco's customer said that it's possible to purchase AIR-LAP1142K-E-K9. is it true ? on the website Cisco: url... for morocco: the customer, can it purchase AIR-LAP1142K-E-K9 ?
View 2 Replies
View Related
Jan 19, 2011
Due to lack of wires we decided to extend our network by using WET546 bridge by linksys. Ideally we looking to create topology like this:
(Computer)--eth--(WET546)---wireless----(AP/WLC2100)---(router)---(Internet)
WET546 successfully authenticates and looks pretty healthy on controller (see below) , however neither of computers plugged to WET546 was unable to obtain ip address from dhcp server , nor working with static ip. I was under impression what it might be related to some default policies on WLC2100. Logs (warning) on WLC2100 looks clean.
View 8 Replies
View Related
May 20, 2013
I am working on a wlc 5508 in a lab environment doing snmp reporting & i was wondering if there is anyway to after the timing on how quick the snmp traps appear on the trap log page? I have looked through the gui but cant seem to find anything, so not too sure if there is a cli command, the traps come in very quickly on the nms way before they appear on the trap log page.
View 1 Replies
View Related
Apr 2, 2013
I am having a very peculiar issue wherein an 1142 WAP is randomly disassociating and powering down due to what the Trap log is calling a "Watchdog Timer Reset." The only way I can get it back up is to power cycle the AP. Currently the AP is being powered by a Cisco Power Injector. Is this a hardware of software issue with the AP itself? From what I read about Watchdog Timers it sounds like it could be. I posted below the Trap Log output after I power cycled the AP:
[code]....
View 12 Replies
View Related
Apr 9, 2013
I have a strange issue with clients connected to a WiFi network.I have configured AP in FlexConnect mode and 2 SSID's. After a reboot of the AP the network is stable for almost 45 mins. Then each client will go UP and Down, mostly with a delay of 5 mins.
What could be the source of this. The clients are Windows CE handheld with fixed IP adres. I already configure persitent client and have play arround with APR timers as well. Thereby an Windows desktop or an iPad has less connectivity issues but even they expert pakcteloss once in severall minutes.
Session timer is turned off
The iPad for example can play music, but each 5 mins you hear a little hickup and 2 subsecond ping are loss.
Controller version is 7.3
View 6 Replies
View Related
Jan 20, 2011
I've got a 2106 that I'm installing for a customer and having issues with it assigning DHCP to WiFI clients. What's odd is that this was working at one point at home during testing. Only difference at this point is LAN hardware at the customer location.
Simple config- single flat vlan on Cat2960G switch, ASA5505 serving up DHCP for the network. Wired clients are receiving DHCP fine.
Mgmt IP192.168.0.10/24Mgmt Gateway192.168.0.1Mgmt VLAN0Mgmt Int port1Mgmt DHCP server192.168.0.1AP Mgr Int IP192.168.0.11Virtual GW IP1.1.1.1RF group namerfgrp1SSIDxxxxClient Static IP?noCountry Code802.11a/b/g statusenabledRadio resource mgmt statusenabled I've run dhcpd debug on both the controller and the ASA and I see the DHCPD requests on the controller, but I never see them hitting the ASA.
I don't have the specific version of code it's running, but I know it's 6.0. One of my local Cisco account engineers found some Cisco CSC bugs referencing this issue. One TAC cas even referenced stripping all security off the WiFi, connecting the client and then reimplementing the security again.
View 7 Replies
View Related
Jun 12, 2011
I'm trying to connect my portables to a central server that has all my music on it, all located in the same area. I've tried ad-hoc but it limits me to using the preset shared folders only, and its frustrating to use as it breaks once a computer leaves the network.Anyways i just want to create an off-line wireless intranet that will remain persistent even when all computers have left it. This doesnt seem to be possible with built-in windows tools, what program will let me do this?
View 2 Replies
View Related
Jul 19, 2011
how to change the ARP timer in CISCO. I know how to change th mac-address aging timer, but can't seem to find any documents on how to change the ARP timer from 4 hours.
View 2 Replies
View Related
Apr 26, 2013
We have a non-cisco device peering with Cisco 6500 for bgp. The routing table is fully populated and connection is good.But after some time we see bgp hold timer error on the non-cisco device. This device by default has a hold timer of 90 seconds which is different from default cisco hold timer. Will this cause any disruptions to the network? If we change the hold timer on one device to match on both sides, will it reset the bgp session?
View 10 Replies
View Related
Feb 20, 2013
how to put a timer on dlink n150 router for protection on unwanted visitors or how to change password often for my internet cafe.
View 2 Replies
View Related
May 9, 2012
I have a cisco 877 configured foir lan to lan between sites A and B. I have used vlan 1 but looks like i have to bvi1 if i need to use the wireless,what is the difference between bvi and vlan. if i wanted users on the same vlan and wireless what would be the base config ? at the moment all corporate traffic goes to site A and other traffic goes to internet. now would i be able to create two ssid, one for corporate to access corporate subnets and the other for guest access alone where the traffic goes out to the internet.
View 1 Replies
View Related
Mar 3, 2013
i cant create dlink acess point password , if I am going 192.168.0.50 then showing error massages , I am check two three computer , then the same error coming
View 1 Replies
View Related
Oct 6, 2012
how we can make guest access to our network like hotels by using our WISM v 7.0.220 and wireless control system and ACS ?
View 1 Replies
View Related
Mar 5, 2013
Region : United Kingdom
Model : TL-WR702N
Hardware Version : V4.20.0
Firmware Version :
ISP :
Using a TL-WR702N router as a wireless access point on a narrow-boat. How to print from my i Pad and iPhone to a printer on my narrow-boat, on the UK inland waterways. The Apple store geniuses seem to contradict each other on how it can be done, if at all. I have an i Pad and iPhone and would like to print photos, documents and the occasional web page to my Canon MG4250 printer, which has Air print capability, while I am cruising. I don't have a PC on the boat and of course there is no telephone or broadband connection (other than via 3G on my iPhone). In other words, I want to link my printer to a router, then when required, wireless connect to the router to print from my Apple devices.
Will the TP Link TL-WR702N 150Mbps Wireless N Nano Router allow me to do this? Reading the product information, this nano router looks very flexible, but all five modes mentioned seem to utilize an internet connection. I only have an internet connection via 3G on my iPhone, and can also tether the i Pad to the iPhone's WiFi hotspot to give internet connection on the i Pad. Would I have to use this internet connection somehow, or can I just connect the Apple devices to the printer via the WiFi on the nano router?
In effect I want to create a wireless access point for printing, without any, or at least a regular, internet connection.
View 4 Replies
View Related
Jul 22, 2009
I have a working BGP session established. With "debug ip bgp events" I see many (2/3 every second) messages like this:
*Jul 23 11:23:48.773: BGP: default originate timer at max delay of 64 sec
*Jul 23 11:23:48.997: BGP: default originate timer at max delay of 64 sec
I can find nothing about this message. IOS version is 12.4(24)T and platform is Cisco 2811
View 8 Replies
View Related
Apr 29, 2013
Amazed I cannot find this in any documentation but I want to know the default aging timer for ICMP redirects on a 3750 switch running at layer 2.
View 10 Replies
View Related
Sep 27, 2012
I am having an issue on a Cisco 3750 stack where when the stack master is rebooted, all my lacp port-channels drop and then come back up again. After doing some investigation It seems that it is happening because of lacp using the stack master mac-address as part of the system-id, so when the stack master reboots, the stack mac changes. I see that there is the command: stack-mac persistent timer 0
There is this warning about using this command:
When you configure this feature, a warning message displays the consequences of your configuration. You should use this feature cautiously. Using the old master MAC address elsewhere in the domain could result in lost traffic.
My question are:
Are there any other consequences to using this command (apart from moving the switch/mac to another location in the network)It mentions 'If the entire switch stack reloads, it acquires the MAC address of the master as the stack MAC address' Is this still the case if you have the stack-mac persistent timer to 0? Does using channel-group mode on for the port-channels still use the same mechanism of having a system-id? (Will the channels flap using 'mode on' when rebooting the stack master.
View 4 Replies
View Related
Mar 4, 2011
How to create a password to access one pc to another pc. Like i have 3 pc it is connecting throw switch. ip addresss is 192.168.1.1 192.168.1.2 192.168.1.3 i want access from 192.168.1.1 to \192.168.1.2 like this here i want to create login password and how to remove password
View 10 Replies
View Related
Feb 21, 2013
we have a cisco asa 5505 and it working great .i want to create web server that only selected public ip address can access.
View 3 Replies
View Related
Apr 7, 2011
Last time, i´ve implemented a Remote Access VPN to my network with ASA 5510 I´ve allowed to my VPN an acces to all my Internal LAn But i want to configure a group of vpn in the CLI for have different group of user which can access to different server or different network on my LAN.
Example : informatique group------access to 10.70.5.X Network
Consultor group -------- access to 10.70.10.X Network
I need to know how can i do that , and if you can give me some eg script for complete this Here is my configuration :
ASA Version 8.0(2)!hostname ASA-Vidruldomain-name vidrul-ao.comenable password 8Ry2YjIyt7RRXU24 encryptednamesdns-guard!interface Ethernet0/0 nameif outside security-level 0 ip address X.X.X.X 255.255.255.X!interface Ethernet0/1 nameif inside security-level 100 ip address X.X.X.X 255.255.255.X!interface Ethernet0/2 shutdown no nameif no security-level no ip address!interface Ethernet0/3 shutdown no nameif no security-level no ip address!interface Management0/0 description Port_Device_Management nameif Management security-level 99 ip address X.X.X.X 255.255.255.X management-only!passwd 2KFQnbNIdI.2KYOU encryptedftp mode passivedns server-group DefaultDNS domain-name vidrul-ao.comaccess-list 100 extended
[code]....
View 2 Replies
View Related
Feb 7, 2011
create a new proxy to access Facebook in school.
View 1 Replies
View Related
Mar 2, 2011
how to create a password to access one pc to another pc .like i have 3 pc it is connecting throw switch .ip addresss is 192.168.1.1,192.168.1.2, 192.168.1.3 i want access from 192.168.1.1 to \192.168.1.2 like this here i want to create login password and how to remove password
View 1 Replies
View Related
Sep 15, 2011
At first I use ACS 4.2 to create static ip address user for remote access VPN,It's easy,just configuration it at user set>Client IP Address Assignment>Assign static IP address,but when I use ACS 5.2 I can't find it.I try to add IPv4 address attribute to user by read "ACS 5.2 user guide" ,it says this: [code] I do this,but it's not work.When I use EasyVPN client to connect ASA 5520,user could through authentication but will not get that static IP address which I configuration on Internal Users.so,what should I do,if anyboby knows how to use ACS 5.2 to create a static ip address user for remote access VPN.
View 2 Replies
View Related
May 8, 2012
I have a newly aquired asa 5505 that I just set up to the bare minimum configurations. I followed a cisco paper on how to create a "remote access vpn" setup for ipsec. I can sucessfully connect and establish a VPN, but when I try to access an inside resource from the vpn address, the asa blocks it.
Specific error is: Code...
View 17 Replies
View Related
Sep 23, 2012
Is there a module or way to create a Guest Access Lobby on the ASA 5525? We currenly leverage the WLC to do this for us, but are moving to a routed access enviornment which is causing some issues. We would like to offload the guest access responsibility to the ASA if possible.
View 1 Replies
View Related
Jan 4, 2012
i m working in a domain environment . for example my domain name is testdomain.com. i create a shared folder on it and give everyone a read control over it. then i create a folder in that shared folder with name of test. i also create a user with name test. i give full control to test user over test folder. now when i access the test folder from network with username test. i can read that folder but when i create the file or folder in the test folder it will show the following error..."unable to create a folder"new folder" access is denied.
View 1 Replies
View Related
Jun 10, 2013
when I click 'Create...' under Access Policies > Default Network Access > Authorization, and then press the 'OK' button, it says 'Please configure at least 1 condition.' However I have no way to configure conditions as the 'Conditions' text is just bold text and not a link or any sort of configurable area. If I go to 'Customize' on the bottom right and add conditions to the right list box, I still have no options when I press Create. Also, the 'green light' next to Default Network Access is grey with a line through it. This is the most cryptic system I have ever used
View 12 Replies
View Related
