port forwarding this im trying to setup a minecraft server with bukkit and i tried a number of things to port forward and it won't open port. I have a tomato firmware linksys router and a qwest modem.
View 1 RepliesI've been wanting to port forward this game called Minecraft for quite awhile now, but never got around to it, but now that I've wanted to let my friends that can't play with hamachi play with me. I wanted to port forward it so that they go into the game without using hamachi, or any other networking program. I've already tried once and whenever I ran my server, I would say "FAILED TO BIND TO PORT" or just ask me this "Is another running on that port?"
View 9 Replies View RelatedI'm just setting up a Cisco rv180w router to replace our aging Belkin. I need to allow a range of ports through the firewall to a particular PC on our internal network that runs our VOIP/SIP Trunk phone system.
The Cisco's Port Forwarding looks like it can only forward one port at a time, but for our phones I need to allow a full range of ports (in this case ports 49152-64512) to one machine at 192.168.x.xx.
On the Belkin I used something called 'Virtual Servers' which allows you to enter ranges of ports. Anybody know what the equivalent might be for the Cisco router?
My Comtrend WAP5813n router, seems to be failing at port forwarding as I have configured it to forward ports,all the port checkers (offline and online) say those ports are open, yet I cannot access through them,it just fails to forward them(My server isn't blocking anything because it has worked on a previous router).
View 19 Replies View RelatedI've been trying to port forward for my minecraft server I'm setting up forever now and it still won't work. I used the minecraft tutorial to make my IP Addresses Static and I've made it so the port is forwarded on my router. I'm using Craftbukkit and hosting the server from my computer, which is not the one connected straight into the modem (If that matters).
View 9 Replies View RelatedHow do you port forward Minecraft on a Motorola SBG6580 because I tried it and it didn't work I really want to have my own minecraft server,Dont say to go to portforward.com because I tried it and it didn't work it says the port is still closed when I check it on yougetsignal.com
View 5 Replies View RelatedI'm trying to forward ports for game connections. For this particular game, I'm trying to forward port 7777My ports aren't forwarding according to: Open Port Check Tool - Test Port Forwarding on Your Router and Open Port Check Tool[CODE]
View 13 Replies View RelatedI am trying to port forward for Vuze and I am having a problem understanding the concepts at [URL] for working within two routers. I have a Zoom 5241 cable modem connected through a Motorola VT2442-VD for Vonage VOIP, then connected through my Netgear RangeMax WPN824v3 wireless router, to my computer. I am also running AVG internet security. Here is a look at my ipconfig /all:
C:Users
ex>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : MarekFamily
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
However, I do not understand where to setup the static ips and where to drop DHCP to be able to port forward successfully. I have tried in Vuze to set up acceptable ports 51600 for TCP and UDP, but they continue to get this error: "NAT Error - Connect attempt to 67.60.124.173:51600 (your computer) timed out after 20 seconds. This means your port is probably closed." I do know that the Ip present is from my Vonage with my external IP address. I even tried to establish rules for TCP and UDP within AVG Firewall settings for the Vuze program.
I've been having trouble signing into the PSN and Sony have given me some TCP and UDP ports to enter, I presume they're the ports for PSN.
TCP Ports: 80, 443, 5223, and 10070 - 10080
UDP Ports: 3478, 3479, 3658, and 10070,
When you want to open new ports on the BT HomeHub you have to fill out this form, and I don't know whereabouts I enter these ports I've been given.
I have a desktop that I have my Minecrarft Server on. It was working fine until I forwarded port 25565 to it, and now I cant use firefox or internet explorer. I can access the server from my other computer on the same network, but none of my friends can from their houses.
View 1 Replies View RelatedI have my internet through CenturyLink which is a DSL connection running on an Actiontec Q1000 on a Windows 7 set up. I'm trying to run a subsonic server on my computer to stream my music collection. It was all working beautifully until I had to switch to this modem from my previous. Now, when I go to canyouseeme.org, it can't see that 4040 and 8080 are open. They need to be for subsonic to work? I've tried to set it up as portforwarding
View 5 Replies View RelatedAt first I tried to port forward 25565 on my D-Link Router account, but that didn't work for anyone trying to connect through the External IP.
People can connect locally over my network and I can connect to the game via localhost, but like I said, no friends from abroad.
I've checked my External IP and that doesn't work, I've tried resetting my router to factory default and then reinstalling the firmware for the model, that didn't work. I tried removing the firewall altogether, and also just allowing 25565, but that didn't work. I also got my friend to take their firewall off as well.
(Also, it should be known, when I'm port forwarding I'm allowing access, and have 25565 set in both TCP and UDP. I tested to see if the port was open on Open Port Check Tool, but it said it was closed (connection timed out) even though I had it forwarded)
Router Model: TP-Link TD-W8970 port forwarding my modem/router. I previously was able to successfully port forward a Valve Source Server and had other people join on the internet so...(It worked) I recently reformatted and since have had issues.
I'm currently setup with PPPOA and I've added various ports for different programs (a Teamspeak 3 Server[9987] and Minecraft[25565]) either dont work. I used a port checker program and they either say the port is closed or the connection is refused...I've tried using a static IP but I think i configured it wrong becuase i was barely able to get the internet while using it, either way..the ports didn't open.
DCHP is disabled (Tried enabling, didn't work) The above ports are enabled with Windows firewall (inbound+outbound) and Im not using any Anti-virus software to block the ports. Windows 7 64bit, fresh format and ports that wont go through.
I've been trying to configure my router which is linksys E1000 to forward port to my sharepoint server. Here is what I have done so far, setup single portforward to i.e 192.168.xx.xx using port 4848.Now my question is, do I need to configure sharepoint to receive this incoming connection. I do need to have my sharepoint be accessed anywhere on the web.
View 1 Replies View RelatedI have set up port forwarding for my WD Network HDD, which runs a Media Server (Twonky). Now, I have tested the ports and accessed it through the internet and it works fine, until... I click a link to open a folder and suddenly I get a "No such page" error thing. I have however identified this problem, it seems that when I go off the main page it re-routes to the original network address, not my IP forward address. For Example if my IP was 82.9.12.456 and the port was 800 i would go to "82.9.12.456:800" and it would load but once I navigate i go to "192.168.0.*:800/*****" and does not load the page. If i then copy and past my IP into the URL it works, but this is annoying.
View 3 Replies View RelatedI have at&t DSL with Westell Modem/Router in Bridge Mode and Linksys Router connected. The internet is working fine, but I'm unable to forward ports on the Linksys Router. The ports are 80 and 37777.
View 1 Replies View RelatedI have a e4200 router, And a 660 series modem, I'm trying to portforward for a game called minecraft, I cannot seem to get the ports to open, I've called Century link they told me to put my modem in to bridge mode, So I did they said my IP should be public not private now, It is still private
View 6 Replies View RelatedI have tried everything possible with this modem and router. I cant figure it out. I tried the router in bridge mode, tried opening the ports up on both of them.
View 14 Replies View Relatedtrying to set up my router from the qwest modem
View 1 Replies View RelatedI'm trying to configure port forwarding for FTP but in my case it isn't as simple as i assumed ... i have an actiontec router/modem that serves as incoming internet from my provider (FIOS), which i connected to my own router (dir-825). i mainly configure my network on the dlink and leave the actiontec alone.
[CODE]...
I am trying to open up port 32400 on my 881w Cisco router but I have not had any success I need to configure manual port-forward to enable my Plex Media server.
View 1 Replies View RelatedI am trying to allow an external website access to my http://localhost:8080. It is a trusted website.
I have a ZyXel Q1000 modem and a Trendnet TEW-452BRP router. The TRENDnet is serving a PS3, Xbox, Wii, and 2 iMacs and the ZyXel is serving the TRENDnet.
My public IP for the ZyXel is 65.xxx.xx.152 and it's IP address is 192.168.0.1 with a range of 192.168.0.2-254 My TRENDnet IP is 192.168.1.1 and a range of 192.168.1.100-199
I have setup a Virtual Server on the TRENDnet using HTTP, Protocol TCP 80/80 and LAN Server 198.168.1.109 (my iMac localhost). I have also setup Application forwarding and Port forwarding on both the modem and router (at different times, trying to resolve this).
Naturally none of those worked. I don't know if I need a Port forwarded or Application forwarding or the Virtual Server. Also don't know if either of those need to be on one or both devices.
All I do know is to access my localhost from the Internet, all I need to do is put http://65.xxx.xx.152 in the address bar of a browser outside my network, and my modem/and or router should forward the request to my iMac and my localhost:8080.
But every configuration I have tried does nothing of the sort.
I'm currently using Cisco EPC 3000 cable modem and Airlive wt-2400r router. Afaik the cisco isn't a router, but i'm still having some weird problems with forwarding and apparently even DMZ wont work .
View 10 Replies View RelatedI've been trying to port forward my modem and router for Xbox 360 live. Only problem is, I know absolutely nothing about networking or configuring modem / router settings.Anyhow, I was told to put my modem into Bridged Ethernet mode. I tried, then I couldn't even connect to the internet anymore.my router model is a Belkin F5D7234-4 V5. My modem is a Motorola 2210-02-1006.
View 14 Replies View RelatedI recently signed up with AT&T U-Verse. They required that I buy a 2Wire 3600 HGV router. I looked up how to forward ports -- and even called an AT&T representative -- and I am sure that I forwarded them correctly. I'm trying to host a Minecraft Server. I forwarded port 25565 in TCP and in UDP. After that wouldn't work, the AT&T representative said that the traffic was being blocked from my side. I then checked my Windows Firewall and allowed all proper applications -- Minecraft and Minecraft Server. When that wouldn't work, I went in an manually added exceptions to Windows Firewall for TCP - 25565 and UDP - 25565 Inbound and the same for Outbound. Nothing.I have tried to check the ports in DMZ mode with Windows Firewall disabled -- they are still timing out. What should I do?
View 7 Replies View RelatedI was in an online game with my wife when I lost my internet connection. We are on the same Lynksys wireless-B router. My pc is running win7, hers has win8. I could not reconnect but could connect if I went directly into the modem. I have Comcast cable.
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all
Windows IP Configuratin
[code]....
I have a Cisco DPC3825 and i don't know how to port forward it i want to port forward so i can host my server without hamachi?
View 1 Replies View RelatedI bought this ( Belkin N150 Wireless Modem Router with Push Button Security Set Up and Network Status Display (F6D4630uk4A): Amazon.co.uk: Computers & Accessories )I want to use this instead of the modem I have now. Is it possible to make this my modem to connect to from the internet? I have a cheap talktalk modem and I want to get rid of it.
View 2 Replies View RelatedI have a Belkin router (model to follow when back at work), which I've set up port forwarding, or virtual servers as it's called in the router admin. I also have a PPPoA login with static IP from BT which has been set up on the router.Essentially, if I was to visit the routers IP address in a browser, It should go via my router and through it's port 80 forwarding to the assigned IP which has a static IP rather than DHCP assigned IP within the network. The computer with this IP has a web server set up, and the holding page will be shown in the browser. This is how it should work.
Mine works exactly as it should as shown above... Some of the time. Generally though, connecting to the network externally doesn't work, and the port forwarding seems not to work. I've tried pinging the external IP and get connection time outs, which obviously is not ideal. When I reset the router it sometimes works as it should, but mainly doesn't. I have a few ports forwarded to a server computer, and when the web server cannot be contacted, neither can any of the other forwarded connections.
I have been working on this problem for the last few day and have know idea why its not working but my d link Dir-615 will not work with my qwest q100 modem.
View 1 Replies View RelatedI have got a PC at work (Windows XP Pro SP3) that is on two networks with the IPs 10.20.30.167, subnet 255.255.255.0 (internet enabled) and 10.0.0.20, subnet 255.255.255.0 (no internet). On the 10.0.0.X network there is a gateway with the IP 10.0.0.200 allowing access to another network; 192.168.60.X, subnet 255.255.255.0 (no internet). I have added the route on my work PC to access the 192.168.60.X network via this gateway and I can access all PCs on all three networks from this PC.Now, I am using LogMeIn Hamachi so that I can access the networks at work from home. The PC at work is the 'gateway' PC on the Hamachi network. When installing Hamachi it created a new network connection and bridged this connection with my 10.20.30.167 network adapter to allow access to the 10.20.30.X network from an external PC when connected using the Hamachi VPN connection. I have manually configured my Hamachi connection on my PC at home to the IP 10.20.30.169, subnet 255.255.255.0, with the default gateway set to 10.20.30.167. I can ping all computers on the 10.20.30.X network from my PC at home.
I then added a route on my PC at home for 10.0.0.X to go via 10.20.30.167 (the 'gateway' on the Hamachi network). I also enabled IP forwarding on the 'gateway' PC (my PC at work). I can not ping any PC on the 10.0.0.X network from my PC at home apart from 10.0.0.20 (the other NIC in the Hamachi gateway PC) and 10.0.0.30 (another PC on the 10.20.30.X network that is also on the 10.0.0.X network).Now, with IP forwarding enabled on the Hamachi gateway PC I would assume after adding the route on my PC at home for 10.0.0.X traffic to go via 10.20.30.167 that I would be able to ping all PCs on the 10.0.0.X network...I also tried adding a route on my home PC to send all traffic for the 192.168.60.X network via 10.20.30.167 which has a route via 10.0.0.200 to the 192.168.60.X network, but this also did not work.I then tried adding the 10.0.0.20 network adapter into the network bridge that the Hamachi connection made, also keeping both IPs (10.20.30.167 and 10.0.0.20) on this network bridge by adding them into the 'IP Settings' in the 'Advanced TCI/IP Settings'. I also added the 10.0.0.200 gateway for good measure. I still cannot ping any PC on the 10.0.0.X or 192.168.60.X networks from my PC at home.
I have also added the route to the 10.20.30.X network on a PC on the 10.0.0.X network to go via 10.0.0.20 and tried pinging a PC on the 10.20.30.X network but this also has not worked. Also setting the default gateway on a PC on the 10.0.0.X network to 10.0.0.20 does not allow this...Surely bridging the networks 10.20.30.167 and 10.0.0.20 on my work PC would allow another PC on the 10.0.0.X network to access the 10.20.30.X network after adding the route or setting 10.0.0.20 as the default gateway?
I need to open the 443 port on my rangemax wireless router to enable credit card processing
View 1 Replies View Relatedi want to open portforward to utorrent in arouter but i cant open the addres of the router lookand when i go to local area connection status /status/detailsi found number of ip but there is no gateway i take whole ip and put them in browser and its dont open but the last friday i wake up in 3am run cmd and put ipconfigi found the gateway 192.168.2.45put it it in browser its open want username and pass i know them but i see lets doit next day going to bed next day the gate way reverse to the stupid gateway in in the pic i cant use aprogram to open port as i cant knowing my router mode
View 1 Replies View Related