Forwarding Ports And Hosting Minecraft Server
Apr 30, 2013
I recently signed up with AT&T U-Verse. They required that I buy a 2Wire 3600 HGV router. I looked up how to forward ports -- and even called an AT&T representative -- and I am sure that I forwarded them correctly. I'm trying to host a Minecraft Server. I forwarded port 25565 in TCP and in UDP. After that wouldn't work, the AT&T representative said that the traffic was being blocked from my side. I then checked my Windows Firewall and allowed all proper applications -- Minecraft and Minecraft Server. When that wouldn't work, I went in an manually added exceptions to Windows Firewall for TCP - 25565 and UDP - 25565 Inbound and the same for Outbound. Nothing.I have tried to check the ports in DMZ mode with Windows Firewall disabled -- they are still timing out. What should I do?
View 7 Replies
ADVERTISEMENT
Jun 21, 2012
I've been trying to port forward for my minecraft server I'm setting up forever now and it still won't work. I used the minecraft tutorial to make my IP Addresses Static and I've made it so the port is forwarded on my router. I'm using Craftbukkit and hosting the server from my computer, which is not the one connected straight into the modem (If that matters).
View 9 Replies
View Related
Jul 30, 2012
How do you port forward Minecraft on a Motorola SBG6580 because I tried it and it didn't work I really want to have my own minecraft server,Dont say to go to portforward.com because I tried it and it didn't work it says the port is still closed when I check it on yougetsignal.com
View 5 Replies
View Related
Oct 1, 2012
port forwarding this im trying to setup a minecraft server with bukkit and i tried a number of things to port forward and it won't open port. I have a tomato firmware linksys router and a qwest modem.
View 1 Replies
View Related
Jul 15, 2011
I've been wanting to port forward this game called Minecraft for quite awhile now, but never got around to it, but now that I've wanted to let my friends that can't play with hamachi play with me. I wanted to port forward it so that they go into the game without using hamachi, or any other networking program. I've already tried once and whenever I ran my server, I would say "FAILED TO BIND TO PORT" or just ask me this "Is another running on that port?"
View 9 Replies
View Related
Feb 22, 2013
I have this Minecraft Server hosted at TCP 25565.I don't use any router and is connected to an RG-Box directly.My Firewall is disabled and so is Avast!But still nobody can connect from anywhere. I gave them my external IP and nothing worked out.I did a "netstat -a" search, and yes, I do have a connection listening at this port TCP.Still, I get this "Connection timed out: Connect" error when trying to reach my server from anywhere out side of my network.I called my ISP regarding this problem, and they told me that they were only blocking port 24 and 25, all other ports is free to use. And they told me that I don't need to Port-Forward or anything, I just plug my computer directly into the RG-BOX, and I should be good to go. But I'm not.
View 4 Replies
View Related
Sep 6, 2011
Im trying to port forward a minecraft server. To do this i have to goto to the default Gateway which is 192.168.1.1. i come to an authentication screen that says:The server 192.168.1.1:80 requires a username and password.The server says: NETGEAR WNR2000v2.
NETGEAR WNR2000v2 is the name of my wireless router.Everywhere i go it says the username and password is:
admin, admin
admin, password
admin, 1234
admin, (none)
password, password
password, 1234
password, admin
password, (none)
None of these work i even tried typing the name name and password of my router. No luck?
View 7 Replies
View Related
Feb 22, 2013
Trying to set up a minecraft server, I have a dlink DIR-601 router.I followed instructions on the portforward site, and use a portchecker and my ports are correct in practice, but they wont ever show as open.Below is what I have done, virtual server is empty and nothing checked. The ip in the picture is my static IP.
View 8 Replies
View Related
Apr 9, 2012
I'm looking into building a server for Minecraft and Ventrilo and have some questions.Should I build from scratch?If so, what parts are most important? Will I be able to run both things on one server?
View 6 Replies
View Related
Mar 23, 2011
On Windows XP, my integrated NIC stops working after hosting a server. The server starts fine, ports are forwarded, firewall is down, modem is fine, but when I receive a connection, it shows they have made a connection, but then they drop, as do I. I can't browse or ping anywhere. I have to physically disconnect, then reconnect the ethernet cable to the port, or restart the computer. Upon ipconfig, the adapter is set with the Windows default ip (169.x.x.x) and cannot be /release'd or /renew'd.
View 10 Replies
View Related
Jun 3, 2012
I have a desktop that I have my Minecrarft Server on. It was working fine until I forwarded port 25565 to it, and now I cant use firefox or internet explorer. I can access the server from my other computer on the same network, but none of my friends can from their houses.
View 1 Replies
View Related
Jan 8, 2012
I had setup 2 servers at home. I'm now in need of hosting 4 websites. I have 4 static public ip's. I'm currently using a router with DD-WRT firmware installed. I have setup up as static NAT. X.X.X.27 to 192.168.0.100, X.X.X.28 to 192.168.0.101. This is my current setup for the existing 2 webservers which host a website each. I notice apache allows for multiple websites per server. One of the server's is a dell 2500 with 2 NIC's and will not be a problem assigning two ip's. The second server only has 1 NIC. Should I buy another NIC card for the second server or could I get by using a virtual NIC? The load on the servers isnt heavy. Only bout 20 clients connect to them daily.
View 8 Replies
View Related
Aug 3, 2012
Minecraft 1.3 LAN server function fails because host IP bad. The host (a laptop) connects to the LAN with a proper 10.0.1.X type address, but this particular laptop uses a 169.* address when it establishes/reports the game (instead of it's 10.0.1.X) and no other computer can connect to it. Other computers DO establish/report the 10.0.1.X address they receive from the wireless router, and they can host just fine- but I really need to get the one laptop to serve as host since it has more horsepower.
View 10 Replies
View Related
Dec 24, 2011
a few days ago i had a router dlink 2740b and i made a dedicated server of call of duty4 where my friends and i played. yesterday i changed my router with another dlink 2740b f1 version (a new version of the same router): i make port forwarding for the cod4 server but the server doesn't go online....i see it only in local....but my friends and i don't see it in the internet server in the game menù...
View 1 Replies
View Related
Aug 7, 2011
how much RAM is requied on server hosting CiscoWorks. Our CiscoWorks is running like snail. We have 3200 logical devices configured on it. Specially browing different pages of CiscoWorks is very very slow.
how big hard drive will be enough for CiscoWorks with below applications installaed and configured with 3200 devices.. Currently we have 65GB Harddrive and its 85% full.
Server Platform: Windows 2003 server 32-bit
Server RAM: 4GB
Hard Drive: 63GB-CiscoWorks is installed on this Harddrive.
Another Partition of Harddrive is 130GB and its 100% free.
LMS: 3.2.1
RME: 4.3.1
CM:5.2.1
View 2 Replies
View Related
Jun 28, 2012
I have a telephony system already in place with 6 FXO active ports configured on a 2821 Router.The thing is that I am not able to make an ip phone forward calls to a mobile No.I can make calls to the same mobile number when dialed from the phone but the call routing seems not to function correctly when call-forward all is configured on the ephone-dn.I would like to focus only on voice-port 0/0/0 and 0/0/1?
voice-port 0/0/0
supervisory disconnect anytone
output attenuation -3
echo-cancel coverage 32
compand-type a-law
cptone GB
[code]....
View 3 Replies
View Related
Jan 23, 2013
Ports are still closed after forwarding them dont know why am using TP-LINK WR740N.
View 3 Replies
View Related
May 16, 2011
Now my problem refers to the game Minecraft specifically, but I believe it has more to do with the router than the game, so that's why I am posting on here. To let people connect to your Minecraft server, you need to set a static IP and forward the port 25565. I have followed all of the tutorials for that on this site to the letter, and yet all I can do is make people in my network able to connect. Now before you say this has nothing to do with you guys, I also want to point out that the port checker tool says that port is closed, on both UDP and TCP. For some reason following these guides only opens my port to the network that connects through the router, either wirelessly or wired. So therefore any port checking tools or sites say that it is closed. I have checked my firewalls, turned them off, uninstalled them and that doesn't work. And no, people can't connect through the network unless I forward the ports, so I am actually doing something when I try to forward them. I am running Windows Vista x64-bit
View 1 Replies
View Related
Jul 10, 2012
I'm struggling to set up an SSH router and it always looks like the port is closed...
Here's my set-up
www>D-Link router (ADSL connection)>Linksys router (+Tomato)>Target PC
I have set up the Linksys router to be an SSH server running Tomato as described in many other forums. The "Tomato router" sits behind my ISP-provided D-link-2680 router.
The internal IP of the Tomato router is 192.168.1.200 and if I try: Code:
View 6 Replies
View Related
Dec 1, 2011
I have a problem trying to forward ports needed for steam: my connection to internet looks like this Cisco epc3212 cable modem -> netgear wnr3500v2 ->my pc, all via ethernet cable I set up static ip for my pc and forwarded ports in router but after checking results on web port scanners it only changed from timed out to closed. I have no firewalls, neither on my pc or router, i called my isp and they told me they don't block any ports. I have windows 7. After trying dmz all my ports remain closed except for 3389 which is remote access for windows. I.ve been working on this for past few hours and i'm loosing my mind .
View 5 Replies
View Related
Jun 12, 2012
I've been really stumped when I decided to start using xbox live. When ever I try to join my friends party I am slammed with a NAT error. For years now I have not been able to forward ports at all. Any port checkers come back with unable to contact your router.I am fairly certain its the router because, I directly plugged my 360 into my modem and everything worked like a charm.I've read on a similar post found here "Similar post" that updating the firmware might fix the issue?
View 9 Replies
View Related
Dec 5, 2012
I have a network with multiple servers behind a PIX with 6.3 on it. I have one public IP address, and I'm using NAT. I'm currently trying to port my Exchange server to a cloud host, and the vendor is requiring I open up a wide range of ports for MAPI, basically ports 1024 on. What would be the command to forward all of the trafic cominto/from that broad range? if I could simply route all trafic to and from their two IP addresses to my email server, that would accomplish the same end goal.
View 3 Replies
View Related
Dec 16, 2012
Trying to get port forwarding going using ASDM 6.4 on a Cisco 5510
I want to forward port 25/Smtp to 192.168.1.10
I have added all the rules as outlined in the link below. [URL]
But when running an open port checker on [URL]
It says the port is closed, I have noticed that under Access Rules under the Hits columns it says 52 ?
View 7 Replies
View Related
Nov 26, 2011
I have a RV220W with 1.0.3.5 Firmware installed.
I also have a few servers with services I need to expose to outside the network (RDP and some websites) where the external port is not the same as the LAN port. I could accomplish this with my previous router using port forwarding and it looks like I can do the same here on the RV220W but I can't quite get it to work successfully.
View 3 Replies
View Related
Oct 20, 2011
Ok, so i never had problems with this before until i reformatted my computer. I have used a program called simple port forwarding and i've also manually added the port seeing if theres a difference, but every time i check my port which is 25565 for a minecraft server it says either failed or not open etc.. I checked netstat -an and it showed it was listening to my ip address and port 25565.
View 6 Replies
View Related
Nov 20, 2011
I have a cable modem hooked up to a Linksys WRT54G2 wireless router, which is hardwired to the computer I use.
I go into the router's menu by going through the standard 192.168.1.1 in the browser, and then go to Applications and Gaming. The port I am trying to open is port 25565 for both TCP and UDP. In the Start and End ports I put 25565, and for the end of the IP Address, I put the last digits of my IPv4 address (10). I used a couple of port checker tools, and it is reporting as still being closed.
View 9 Replies
View Related
May 15, 2013
I've created some port forwards from my public IP (Dialer0) to our private LAN but only the 25565 port forward works. I've even added an any statement to the Nat source list Homenet_NAT. Full config attached. My Cisco router is an 877W. [Code]
View 6 Replies
View Related
Apr 5, 2013
Region : UnitedKingdom
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP : Virgin Media Limited
when I forward ports I get the following error message:
Things to note:I have the web GUI running on 8080, because I run a file-server on port 80.
I am using a Virgin media branded router in 'modem mode', this would not cause issues.
I did not do anything to change anything, I went to add an additional port to forward and it didn't work.
I am on a Dynamic IP
After it stopped forwarding, I upgraded firmware to: 3.13.26 Build 130129 Rel.59449n.
View 11 Replies
View Related
Feb 24, 2013
Region : Mexico
Model : TD-W8968
Hardware Version : V1
Firmware Version : the last version of this web page, i forgot number
ISP : TELMEX (infinitum)
i have some problems to configure the port forwarding in my router, don't it work ! but the port number 80 it works with my sub-domain in the internet. after i change this port to 8080 still dont work the port forwarding. the FTP server its ok.
[code]......
View 3 Replies
View Related
Nov 25, 2012
What is the best hosting for vpn. I'm thinking bluehost, but is there anything better/cheaper. I prioritize the features: reliable, features (ftp, ssh, phpbb, perforce, etc.)
View 1 Replies
View Related
Oct 21, 2011
[code]...
How do i setup port forwarding in server 2008?? I have heard numerous ways of doing this through windows firewall, NAT and setting up static routes. Not of which i can get working.
View 2 Replies
View Related
Feb 8, 2012
Alright, so I'm trying to set up a Minecraft server without having to use some sort of hosting program, such as LogMeIn Hamachi. I have tried port forwarding both my external IP from "whatismyip.com" and from ipconfig in the CMD WITH the correct Minecraft port, and others still cannot connect. note that I can only connect to my own server when I use the IPv4 address from my CMD. get my server working so that others can connect? (I have been sure to change my "server properties" file's "server-ip" line accordingly.)
View 1 Replies
View Related
Mar 29, 2011
You are appointed as a system administrator for a large company which has its own computer intranet hosting 150 workstations and around the same number of users. Write few points explaining the roles you would expect to take on as part of your new employment in terms.
View 2 Replies
View Related
