Trying to set up a minecraft server, I have a dlink DIR-601 router.I followed instructions on the portforward site, and use a portchecker and my ports are correct in practice, but they wont ever show as open.Below is what I have done, virtual server is empty and nothing checked. The ip in the picture is my static IP.
View 8 RepliesI have this Minecraft Server hosted at TCP 25565.I don't use any router and is connected to an RG-Box directly.My Firewall is disabled and so is Avast!But still nobody can connect from anywhere. I gave them my external IP and nothing worked out.I did a "netstat -a" search, and yes, I do have a connection listening at this port TCP.Still, I get this "Connection timed out: Connect" error when trying to reach my server from anywhere out side of my network.I called my ISP regarding this problem, and they told me that they were only blocking port 24 and 25, all other ports is free to use. And they told me that I don't need to Port-Forward or anything, I just plug my computer directly into the RG-BOX, and I should be good to go. But I'm not.
View 4 Replies View RelatedIm trying to port forward a minecraft server. To do this i have to goto to the default Gateway which is 192.168.1.1. i come to an authentication screen that says:The server 192.168.1.1:80 requires a username and password.The server says: NETGEAR WNR2000v2.
NETGEAR WNR2000v2 is the name of my wireless router.Everywhere i go it says the username and password is:
admin, admin
admin, password
admin, 1234
admin, (none)
password, password
password, 1234
password, admin
password, (none)
None of these work i even tried typing the name name and password of my router. No luck?
I've been trying to port forward for my minecraft server I'm setting up forever now and it still won't work. I used the minecraft tutorial to make my IP Addresses Static and I've made it so the port is forwarded on my router. I'm using Craftbukkit and hosting the server from my computer, which is not the one connected straight into the modem (If that matters).
View 9 Replies View RelatedI'm looking into building a server for Minecraft and Ventrilo and have some questions.Should I build from scratch?If so, what parts are most important? Will I be able to run both things on one server?
View 6 Replies View RelatedI have a desktop that I have my Minecrarft Server on. It was working fine until I forwarded port 25565 to it, and now I cant use firefox or internet explorer. I can access the server from my other computer on the same network, but none of my friends can from their houses.
View 1 Replies View RelatedI recently signed up with AT&T U-Verse. They required that I buy a 2Wire 3600 HGV router. I looked up how to forward ports -- and even called an AT&T representative -- and I am sure that I forwarded them correctly. I'm trying to host a Minecraft Server. I forwarded port 25565 in TCP and in UDP. After that wouldn't work, the AT&T representative said that the traffic was being blocked from my side. I then checked my Windows Firewall and allowed all proper applications -- Minecraft and Minecraft Server. When that wouldn't work, I went in an manually added exceptions to Windows Firewall for TCP - 25565 and UDP - 25565 Inbound and the same for Outbound. Nothing.I have tried to check the ports in DMZ mode with Windows Firewall disabled -- they are still timing out. What should I do?
View 7 Replies View RelatedMinecraft 1.3 LAN server function fails because host IP bad. The host (a laptop) connects to the LAN with a proper 10.0.1.X type address, but this particular laptop uses a 169.* address when it establishes/reports the game (instead of it's 10.0.1.X) and no other computer can connect to it. Other computers DO establish/report the 10.0.1.X address they receive from the wireless router, and they can host just fine- but I really need to get the one laptop to serve as host since it has more horsepower.
View 10 Replies View Relateda few days ago i had a router dlink 2740b and i made a dedicated server of call of duty4 where my friends and i played. yesterday i changed my router with another dlink 2740b f1 version (a new version of the same router): i make port forwarding for the cod4 server but the server doesn't go online....i see it only in local....but my friends and i don't see it in the internet server in the game menù...
View 1 Replies View RelatedI have a Cisco DPC3825 and i don't know how to port forward it i want to port forward so i can host my server without hamachi?
View 1 Replies View RelatedI have a WRT54G routher hardlined to a Ubuntu 12.04 server that is dedicated to minecraft.I have two ports opened for Minecraft to run off of.I'de like to give remote access to the computer to other people to maintain the server.BUT I need to restrict ANY and ALL ability for them to access the internet by either blocking all other ports or something else. Id rather not have to restrict it through Ubuntu if I don't have to.
View 1 Replies View Relatedport forwarding this im trying to setup a minecraft server with bukkit and i tried a number of things to port forward and it won't open port. I have a tomato firmware linksys router and a qwest modem.
View 1 Replies View RelatedI've been wanting to port forward this game called Minecraft for quite awhile now, but never got around to it, but now that I've wanted to let my friends that can't play with hamachi play with me. I wanted to port forward it so that they go into the game without using hamachi, or any other networking program. I've already tried once and whenever I ran my server, I would say "FAILED TO BIND TO PORT" or just ask me this "Is another running on that port?"
View 9 Replies View Relatedi don't know the ip address of my DP-301p+ print server. how can i reset it to default ip address
View 1 Replies View RelatedI had a modem and I wanted to play minecraft without a hamachi so I decided to buy a router. I bought the router but I do not know how I can portforward the game.
View 2 Replies View Relatedi have port forward minecraft on a netgear WGR14v9 on the router manager but when i run the mincraft server it says i havent and online port checkers aswell
View 2 Replies View RelatedI have been putting up with rubbish wireless signal down one end of my house now for quite some time. So I thought I have a spare wireless router and I could put it down there but I am sure ts not as easy as just plugging it and away you go.
Network Setup
Router 1 is a D-Link DIR-655
Router 2 is a D-Link DI-524
I need to know how to setup Router 2 so it basically become just a wireless access point
How do you port forward Minecraft on a Motorola SBG6580 because I tried it and it didn't work I really want to have my own minecraft server,Dont say to go to portforward.com because I tried it and it didn't work it says the port is still closed when I check it on yougetsignal.com
View 5 Replies View RelatedI've bought a new note book and i can't connect to my Dlink router, it won't accept my security key
View 3 Replies View RelatedI have already successfully upgraded the firmware to DD-WRT with no problems.What I want to do is have the D-Link DIR-601 Router set as a Repeater Bridge because I am trying to expand my wireless signal to dead spots in the house.I have NO SECURITY enabled on my NetGear Router and I am still unable to successully setup the D-link DIR-601 Router as a Repeater Bridge.
View 2 Replies View RelatedFor reasons that are slowly pushing me over the edge of insanity, I have to reset this dumb router!!
I press the stupid little button on the back of it, the lights go out, one amber one comes on etc. etc. but when I go to 192.168.0.1, everything is still the same!!
Like the passwords are still there and nothing has changed! I thought resetting it was supposed to wipe all that stuff out so you could start from scratch? Also pulled the power cord in and out a zillion times but no way it will reset!
As an aside, I am having no end of problems getting my iPads (2) and iPhones (2) to connect to the wireless network! The "Network Discovery" button will not stay checked and though I have done all the Googling and been into Services to start things running, no way it is going to work!
But I digress, how do I get this fool of a router to reset properly?
I have a dlink router. Dir615 I believe. After installing hotspot Shield on my desktop, I can no longer connect to my router from my laptop, which I did not even install Hotspot shield in. when trying to connect, nothing happens. the wireless icon on the taskbar does not show that its trying to connect.
View 2 Replies View Relatedcan i use dlink switch as a router to set up LAN
View 1 Replies View RelatedI reset the router and now it doesn't have a default gateway address. It stops on the check for network status when trying the install wizard and says it can't install it.
View 2 Replies View Relatedhow to put a timer on dlink n150 router for protection on unwanted visitors or how to change password often for my internet cafe.
View 2 Replies View RelatedI have purchased a Dlink DWR 131 today. I did configure it as per the instructions. Initially my iPhone was able to detect the wireless network. Then I switched off the device and turned it on later and it stopped working. It is not damaged for sure, since http://192.168.0.1/ is still accessible from my laptop and I am able to connect to internet through LAN cable. But the wireless network is not working. Even my laptop doesn't detect the network neither does my iPhone. I suspect this to be some configuration issue. I have tried using different SSIDs. Also, MAC filter is disabled. I also tried using different wireless channels. I even did reset the router but no luck.
View 2 Replies View RelatedOur router is a Dlink DGL-4500. Over the last 15 minutes I've been disconnected and reconnected about 5 or 6 times. This happens every so often. But even without it I get disconnected several times per day.I need to be able to stay online and for some certain programs to run, if they get disconnected I will have to reconnect manually and I can't do this if I am not near my computer.I think the problem is specific to my laptop. Most of the time I stay online ok, except for the lapses I've mentioned. I asked someone else in our house if they have been getting disconnected and they say they haven't. Here's an IPconfig and in the next quote box, I did an IPconfig/all>C:esults.txt, which I've posted the content of[CODE]
View 14 Replies View Relatedi have a dlink dir-628 and it not working problem. the power light, local network led and even the dlink logo is blinking. it was working fine yesterday but it just stopped working randomly, i tried to reset but that doesnt even work,
View 6 Replies View Relatedi want to set up my wireless router it is currently set on a static ip but i want to set up in pppoe(username/password) mode i set up once in pppoe but internet is not working?
View 7 Replies View RelatedI have a PC connected to the internet via a d-link 615 router and a cable modem.The PC is hardwired to the modem and the laptop can connect wirelessly via the router.I own a HP 6280 Network MFD and would like to locate this in a separate room to the PC.I own a Linksys WAG54GS mobem router from my last ADSL connection.Can I site the wireless router with the MFD and use it as a wireless hub?
View 4 Replies View RelatedNeed installing dlink router dir-615 version b2. I tried installing it but when i try to use my browsers, i'm redirected to my isp's web page, and i can not connect with skype.
View 1 Replies View RelatedI have a new Dlink wireless router. Previously I had a Belkin router. The new one was said to have stronger signal. I am not able to connect via wireless to the router from a PC with Windows Vista. It works fine when I use a cable. Then I am able to connect to Internet via the router. Also, I am able to print on a wireless printer. It is also possible to use Internet from an Ipad with wifi.
The Belkin router had a different network, 192.168.2....When the cable is connected I can ping 192.168.0.1 but not when I remove the cable. In Windows Vista the connection has status "connected". When the cable is connected, the ipconfig /all is printed as below. It is a Swedish version. Some translated words:
Tr�dl�s = Wireless
Ja = Yes
Nej = No
Fr�nkopplad = Disconnected
[code]...
This is an ongoing problem and I am wondering if a firmware update is called for. We have had the router for some time and to the best of my knowledge nothing has been done to fix the problem except the old "unplug for 10 seconds" routine.There are now four users on the home network with multiple devices.
View 1 Replies View Related