Port Forward Cisco DPC3825 Router To Play Minecraft?
Feb 13, 2013I have a Cisco DPC3825 and i don't know how to port forward it i want to port forward so i can host my server without hamachi?
View 1 RepliesI have a Cisco DPC3825 and i don't know how to port forward it i want to port forward so i can host my server without hamachi?
View 1 RepliesIm trying to port forward a minecraft server. To do this i have to goto to the default Gateway which is 192.168.1.1. i come to an authentication screen that says:The server 192.168.1.1:80 requires a username and password.The server says: NETGEAR WNR2000v2.
NETGEAR WNR2000v2 is the name of my wireless router.Everywhere i go it says the username and password is:
admin, admin
admin, password
admin, 1234
admin, (none)
password, password
password, 1234
password, admin
password, (none)
None of these work i even tried typing the name name and password of my router. No luck?
I had a modem and I wanted to play minecraft without a hamachi so I decided to buy a router. I bought the router but I do not know how I can portforward the game.
View 2 Replies View Relatedi have port forward minecraft on a netgear WGR14v9 on the router manager but when i run the mincraft server it says i havent and online port checkers aswell
View 2 Replies View Relatedport forwarding this im trying to setup a minecraft server with bukkit and i tried a number of things to port forward and it won't open port. I have a tomato firmware linksys router and a qwest modem.
View 1 Replies View RelatedI've been wanting to port forward this game called Minecraft for quite awhile now, but never got around to it, but now that I've wanted to let my friends that can't play with hamachi play with me. I wanted to port forward it so that they go into the game without using hamachi, or any other networking program. I've already tried once and whenever I ran my server, I would say "FAILED TO BIND TO PORT" or just ask me this "Is another running on that port?"
View 9 Replies View RelatedI've been trying to port forward for my minecraft server I'm setting up forever now and it still won't work. I used the minecraft tutorial to make my IP Addresses Static and I've made it so the port is forwarded on my router. I'm using Craftbukkit and hosting the server from my computer, which is not the one connected straight into the modem (If that matters).
View 9 Replies View RelatedIs it possible to create a service which will forward public port 9010 to an internal IP address with port 23?First of all, I do not like to open the public Telnet port to the inside so I would use another public port and second my ISP does not allow some public ports beneath port 80?
View 1 Replies View RelatedHow do you port forward Minecraft on a Motorola SBG6580 because I tried it and it didn't work I really want to have my own minecraft server,Dont say to go to portforward.com because I tried it and it didn't work it says the port is still closed when I check it on yougetsignal.com
View 5 Replies View RelatedI am looking to permanently reset the default remote management port of the MODEM DPC3825 to something other than 8080. how to PERMANENTLY change the port from 8080? In the web interface under administration I have several times set it to something else other than the defaulted 8080 but when the modem is rebooted or reset, it goes back to the default 8080.
View 4 Replies View RelatedCan switch do a port forward without a router just plane switch to port forward to another network crossing the internet.
View 1 Replies View Related[URL]I want to port forward so my family (not in my home) can play Minecraft on my server. What values should I type?
View 1 Replies View RelatedI have a 857w adsl router, I have configured it to connected to my ISP and i get a dhcp address from them, and I have dhcp pool to assign ip addresses to wireless or LAN, i have nat overload on a BVI . I am now trying to get one of the LAN port which has a device of 172.16.0.3 to be accessible from the outside world, but it will not let anyone connect to it.
View 9 Replies View RelatedI need to forward port 2875 from any public address to an internal address 192.168.20.103. I am not getting something right because it will not work. Below is my config.
Current configuration : 11012 bytes
!
! Last configuration change at 23:30:24 UTC Fri Apr 12 2002 by cisco
!
[Code]....
I have a belkin f7d4302 v1 and I can't get it to forward my ports.
View 6 Replies View RelatedI have unchecked 'Block Anonymous Internet Requests” but then also I am not able to forward ports like 80 and port 443.
View 1 Replies View RelatedThis is my Cisco LAB environment used for study but also in production for daily use. I am trying to setup a double-NAT network with just one IP from my ISP through the ASA & 3825 going to (2) end nodes and multiple ports for port forwarding. It is currently working but only as simple PAT and I cannot initiate FTP from the outside. removing the router, but this is my study LAB and it's a bit unconventional for learning purposes. I attached the diagram and need parts of the config.
View 14 Replies View RelatedI'm trying to forward ports for game connections. For this particular game, I'm trying to forward port 7777My ports aren't forwarding according to: Open Port Check Tool - Test Port Forwarding on Your Router and Open Port Check Tool[CODE]
View 13 Replies View RelatedI have my router set up and life was good. i now want to forward a port. i go into apllications/gaming put the application name, the port i want to forward and click enable. Save changes and i get a changes save message. When the browser goes back to the applications/gaming screen no port shows as being forwarded. If i go to canyouseemenow.org the port shows as being closed.
View 3 Replies View RelatedWindows 7 64 bit / Linksys EA3500 / (2) FosCam F18910W IP Camera’s I just installed a new EA3500. (Should I have purchased the 4500)?I need to set up port forwarding to enable wireless use of the IP cams with my iPhone. I had this all set using my former router, but it died.how to to port forward this Linksys EA3500?
View 2 Replies View Relatedi Have a router called Linksys BEFSR41v3 i need to port forward a port but it just wont open i loggerd in on my router using 192.168.1.1 after i click applications & gaming started the port on 100 and ended on 100 used ipconfig in cmd to find me ipv4 adres and putted in ip adress box also both protocol are on and i clicked the enabled function also i tried also got a static ip i used canyouseeme.org to cheak if my port is open it still says its not open.
View 9 Replies View RelatedHaving a devil of a time trying to forward a port on my router. Did everything instructions said, but it still doesn't work. What can I do.
View 2 Replies View RelatedI attached an Iomego Home Media network hard drive to my Linksys E3000 router (via ethernet cable). Before setting up the remote access on the Iomega, I forwarded the ports that it wanted (443 and 21) to the static IP of the Iomega. I checked to see that they were open using yougetsignal.com and they were both open. After setting up the remote access on the Iomega, the 443 port closed and I cant even get into the "manage storage device" page for the Iomega. Iomega uses TZo for the domain names. They tell me that the association is made between the name and my public IP address. My router is out of warranty since Sept, so Linksys wont give me the time of day. I contacted my ISP and while they block a couple of ports, 443 is not one of them.I've installed the latest firmware (1.0.04 - Build 6). Reset and rebooted numerous times, Port 443 remains closed.
View 8 Replies View Relatedi want to open portforward to utorrent in arouter but i cant open the addres of the router lookand when i go to local area connection status /status/detailsi found number of ip but there is no gateway i take whole ip and put them in browser and its dont open but the last friday i wake up in 3am run cmd and put ipconfigi found the gateway 192.168.2.45put it it in browser its open want username and pass i know them but i see lets doit next day going to bed next day the gate way reverse to the stupid gateway in in the pic i cant use aprogram to open port as i cant knowing my router mode
View 1 Replies View RelatedSome routers are able to forward to broadcast directly by sending a port to 192.168.1.255, other's I've been able to trick by forwarding to 192.168.1.254 and then editing the arp table with 192.168.1.254 <-> ff:ff:ff:ff:ff:ff. Is there any way I can edit the arp table of the E4200? Is there a way to telnet in or get a console connection?
View 9 Replies View RelatedI encounter a problem setting up port 80 forwarding on WRT54g router.
Configuration:
- Numericable modem
- WRT54G router : portforwarding configured, accepting anonymous internet traffic, no DMZ, no port-triggering... in fact everything is fine except for ports 80/443
- Linux Ubuntu server + Apache2 listening *:80 and/or *:15001
1/ Situation 1: Apache listening on server's *:15001
-> Accessing from Internet (outside LAN) works very fine.
-> Portforwarding of router:15001 to server:15001 (TCP) works fine.
2/ Situation 2: Apache listening on server *:80
-> Accessing from Internet (outside LAN) FAILS.
-> Portforwarding of router:80 to server:80 (TCP) doesn't work. Diagnostic using the client machine's firewall tool showed the request doesn't get any return... no traffic back at all.
The system being fully operational when using port:15001 shows the problem does not come from server configuration.I still have to try a bypass of my router by plugging the modem directly on the server eth card.
-> If that works it would definitely prove the problem comes from the router, precisely the portforwarding feature as applied to port:80.
My guess is the following:
- As WRT54g router's remote administration interface is precisely set to listen 80/443 ports.
- As I still did not disable remote administration as I need it, but I will come to such extremities (very soon in fact as despair is gaining me
- Looks like WRT54g is unable to forward port 80 as this is it's remote administration port. You can set it up, but it just won't work, and there's no warning
Solutions?
- Disable remote administration? (will it work ? cause I would not risk to disable it for nothing...)
- Have remote administration litening on different ports than 80/443?
- Is my diagnostic correct ? (at least, does it seems to be...)
- (shall I get another device? Update to alternative firmware project?)
PS : I could be asked for ifconfig/netstats/hdw-fmw version, I would post later as I do not have access now.Looks like to me it is recurrent issue on WRT54g (maybe I'm wrong and just an **bleep** in LAN/WAN configuration which is highly possible)
I am trying to set up a web server behind WRT55AG router. I have read many forums where people are having the same problem, but none explain how to fix issue. The router will not forward any port to the server. Any attempt to access the server from outside my local network just brings me to the login screen of the router. I have tried port forwarding port 80 and 10080 and both do the same thing. Also, I have the firewall, remote management, and UPnP turned off
View 3 Replies View RelatedI have one server 172.16.0.100 and i nat this server to a public ip X.X.X.5 and i open RDP for this public ip.Now when i access Remote desktop on this public ip x.x.x.5 it open perfectly.Now my senario is that i want to open a http url on port 5555,server ADMIN open port 80 for this URL on LOCAL lan(http://172.16.0.100:80)So how can i map port 5555 to port 80 on ASA 5520.so when i hit URL [URL]
View 5 Replies View Relatedi am trying to port forward my router so that i can run a minecraft server. When I put in th port number and save the changes, it brings me to a screen that says my changes have been saved yet when i go back to the page they haven't. I have tried deleting the cookies on my browser, using another browser, using another computer, and hard resetting the router for ten seconds. None of this works.
View 2 Replies View RelatedI have the following setup: Private network <-> SW <-> CISCO VPN <-> ISP MODEM
I have configured VPN part and is working correctly. I have a computer in the private network at static address 192.168.1.100 and an application is running on it on 8100 tcp port for clients.
Now I need to connect from the Internet to the application on 192.168.1.100 on port 8100.
How to configure CISCO router to forward traffic coming in tcp port 8100 to machine 192.168.1.100?? ISP Modem is going to handover all the traffic to CISCO device.
How do I port forward on a SAGEMCOM SE567 router to be able to view my DVR from a remote location?
View 3 Replies View RelatedI'm using Cisco Connect Cloud to connect to my E4200 router. I wish to open my NAT type as currently its moderate on all games.Where the hell is the area to add the port ranges?? Is it even an option on the new connect cloud? If it is, it doesn't make it very easy to find. Would be allot easier if you had a tab/app for "Gaming/Applications" like you did previously.
View 1 Replies View RelatedA while back, I had my own minecraft server running. I had everything working and it was flawless. Then for some reason it just stopped working. I was Unable to open ANY PORTS. I did happen to try 65 - 110 and 254 - 210, as well as 12, 212 and 122. I dopnt know what happened but i have been searching everywhere on the internet (roughly 3 months)
View 1 Replies View Related