I have a new Dlink wireless router. Previously I had a Belkin router. The new one was said to have stronger signal. I am not able to connect via wireless to the router from a PC with Windows Vista. It works fine when I use a cable. Then I am able to connect to Internet via the router. Also, I am able to print on a wireless printer. It is also possible to use Internet from an Ipad with wifi.
The Belkin router had a different network, 192.168.2....When the cable is connected I can ping 192.168.0.1 but not when I remove the cable. In Windows Vista the connection has status "connected". When the cable is connected, the ipconfig /all is printed as below. It is a Swedish version. Some translated words:
Tr�dl�s = Wireless
Ja = Yes
Nej = No
Fr�nkopplad = Disconnected
Can I connect Magic-Jack to Dlink -655 wireless router ?I want to connect MJ direct to Dlink 655 wifi wireless router so I can make phone call without turn on computer?
Its a Toshiba laptop and she has a d-link 2680 wireless router. The laptop will successfully connect to the internet through an ethernet cable, and will connect to the wireless network fine but when wireless i cannot access the internet. I have an iphone which connects to the wireless network and accesses the web perfectly.I have tried everything I can think of and find online to try and talktalk tech support won't assist as its a hardware setup issue.
Windows IP Configuration Host Name . . . . . . . . . . . . : Barbara-laptop Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No
I started the FTP Server at the dlink and forwarded port 80 and port 21 to the ipadress from my NAS, surely i activated it. Port 80 for the webmask Port 21 for the FTP server. If i connected me at my homenetwork and typ in my browser: ftp://"username".dyndns.org the ftp server works, also the webmask from the Sharecenter. If i want to connect me from my work or other pc's, the ftp didn't work. can't ping "username".dyndns.org
getting my computer connected to the internet.I have a fresh install of XP Media Center Edition with SP2. I don't really have anything else installed as I wanted to make sure my internet connection was working to get updates. My computer is a Dell XPS720 desktop I have a DSL connection with [URL] and a Dlink Wireless Router DIR655.I have two portable computers that are on the local network with wireless connections and they are working o.k.On my desktop at the command prompt; I cannot "ping" anything and "ipconfig /all" returns nothing at all.
I have a dlink router. Dir615 I believe. After installing hotspot Shield on my desktop, I can no longer connect to my router from my laptop, which I did not even install Hotspot shield in. when trying to connect, nothing happens. the wireless icon on the taskbar does not show that its trying to connect.
My wireless devices are having a hard time connecting though my router. They see the router and can connect to it but cannot get on the internet. When I go into my router and check Wireless Status to see connected devices the window is empty. Usually if I reboot my router some of my devices will connect but if I leave them idle for any amount of time the connection is dropped. Suggestions. I have Dell 530 desktop running Vist Home Premium and the router is Dlink Dir 615. The desktop has no issues connecting to the internet as it is connected through LAN port
i have a Dlink DSL-2730U (an expensive, el cheapo router devoid of any functionalities, which also offers a way to connect to net as a side feature).basically i need to disconnect / reconnct pppoe without rebooting the router. but theres no button on the wan page for doing so.i noticed clicking on most of the buttons redirect to some non-html urls, like .cmd, .cgi etc, and some of them are common for many routers. e.g. on my router, "reboot" takes me to
I would like to connect a hard drive that has USB enclosure to an wireless N dlink extreem router so that I can access files wirelessly on my laptop. I installed SharePort utility on my pc and it is showing drive in the utility connected but can not see it in explore like the way I see when drive is connected directly to LAPTOP using USB port. I also tried to map the drive but nothing works.anything on WIN 7 side ? I tried the same with a USB jump drive but same thing.
set up of the router? There's so many options, manual internet set up, automatic internet set up, networking setup.The Quick CD installation got stuck trying to find the router. Do i need to connect the ethernet wire to my modem then connect my computer to it wirelessly? Do I need to connect the ehernet wire to my modem and connect my computer to it via another ethernet port in the router? Do I even need to connect my ethernet wire to my modem in the first place?
Now I am no techi but I think i have set evrything up ok but when i input my host name in ie all that happens is that it brings up my router admin page. I don't see how i can get port forwarding wrong so thats not the problem, the dvr is a zeus and its using port 80, which according to a port checking tool is closed (is that the problem) the router is a Dlink dsl 2680. My host name is [url]..... and the ip is set to public ip address, so up to press im stuck.
i have internet connection which is connect using dynamic ip address but if i add ip address in Local Area Connection i get two networks, one is internet dynamic ip & other one is ip which i setup in Local area connection. so if i select LAN network for lan clients i can access lan. but now i have DLINK DIR 615 router so what should be my settings?
I have a new gateway X3500, I'm trying to connect my wireless ip cam (Dlink DCS 932L). I have tried to use wpa-wpa2-wep but nothing to do. I update the firmware
I have two d link 604 and want to connect both together so that any pc connected to the repeater can connect to the internet. I am running win xp sp3,p4,2gb,asus p4p800-vm with all updates and firmware of router updated.
i want to set up my wireless router it is currently set on a static ip but i want to set up in pppoe(username/password) mode i set up once in pppoe but internet is not working?
I have a PC connected to the internet via a d-link 615 router and a cable modem.The PC is hardwired to the modem and the laptop can connect wirelessly via the router.I own a HP 6280 Network MFD and would like to locate this in a separate room to the PC.I own a Linksys WAG54GS mobem router from my last ADSL connection.Can I site the wireless router with the MFD and use it as a wireless hub?
I recently bought a new D-Link DIR 615 but I dont get adequate range in the rooms farthest away from the router. I have an old D-Link DIR 634M router which I'm told can be used as a wireless repeater. I went through several articles that describe connecting the two routers through a LAN cable. However is there a way to do the same without using a cable of any sorts?
I've been using DIR-600 wireless router since an year. But, after having a factory reset i'm having a strange issue. When i'm configuring the router in the Dlink page(192.168.0.1 now i changed it to 192.168.1.100).. In that i go to Manual Internet Configuration>> then i select Static IP(Since i've been provided a static IP,gateway, DNS settings by my ISP) As soon as enter IP: 192.168.1.2,, and Subnet 255.255.255.0,,,Gateway : 192.168.1.1 and enter DNS details and press SAVE.. I get a message " Invalid IP Address".. I've set the Router IP as 192.168.1.100 and DHCP range : 3 to 199I don't know why is this happening.. I'm not able to connect to internet now from the router.
This is my first post and I'm not very techy, but our home computer running Windows XP Professional recently lost its connection to the internet and I cannot get it back.This particular desktop computer is connected by a cable to the router. I have two other laptops connected wirelessly through the same router and have access to the internet, however the regular "J&A" network normally associated with the router cannot be connected to. Instead another wireless signal source called "DLink 4 (dlink)" is the connection point. This automacally disconnects when I unplug the router, so I'm assuming the router works fine, but the network is compromised somehow.
Recently the router has been dropping the wireless connection, and now is not connecting with the computer - the ethernet still works. It was suggested to upgrade the firmware but I can't access the configuration.I've tried admin, and blank password which is supposed to be the default. I've also tried XXXXX as password, and another username and password in case I had altered it for security.It doesn't allow me in.
I tested my network throughput speed and it's pitiful. 11Mbit/s or 1450 KB/s! I am running the test from two wireless machines connected via a wireless N router(DLink DIR-655). Both are in good range.I am using the Microsoft NTttcp tool to test my network throughput.
I have been putting up with rubbish wireless signal down one end of my house now for quite some time. So I thought I have a spare wireless router and I could put it down there but I am sure ts not as easy as just plugging it and away you go.
Network Setup
Router 1 is a D-Link DIR-655 Router 2 is a D-Link DI-524
I need to know how to setup Router 2 so it basically become just a wireless access point
Having issus trying to connect though SBG6580. Have tried everything, including factory reset and no luck. Called tech support for my ISP and they weren't
I was told that I need to make sure that ssl port 443 is open, I confirmed that it is at port 443 - Connection Check , I'm still unable to access my gmail account, I was wondering if I need to enable anything on my modem to allow that sort of connection to go through, I'm using D-Link DSL-2640B
I installed a new DIR 601 last July (2011). It replaced and old Dlink 150 that I have used for a number of years.I connected 2 PC's direct to the router and bought 2 dongles and connected two remote PC's onto it (4 total). They are not all on at the same time - usually. The laptop is a gateway vintage 2004 and has XP on it. It is updated I use it everywhere wireless and not. It works wireless ok everywhere, even McDonalds. When I connect it to the home 601 it connects and connects, etc etc. and never does. I am using WEP and have a security key. I see the network on the network list and click. It does not give me an option to enter the security key and does not give me an error and defaults to "Free Public Wifi" (I think this is the internal card). I am sure the security key is the issue and cannot figure out where to enter it. I haven't looked in the registery but that is a spooky place in which to play and I avoid it. Don't want to run into the Blue Screen Boogy man. I did however do a search of the registry for the network name and came up empty. No surprise. Where do I go to find and update the security key to access the router?
