Protocols / Routing :: Escalate An Internet Routing Beyond My ISP?
Apr 5, 2013
We have a PPPoE DSL link with a dedicated IP providing by a small ISP(ISP A) in Canada. We are having trouble reaching a small group of IPs in the US to be able to access some client resources.We have eliminated all possible local issues by removing the firewall and making a direct connection to the ISP. We have also had numerous tests prove successful when we use other local ISPs.
Trace routes show that the packets get dropped a few hops from the destination on a US ISP(ISP B).The routes even appear to be very similar to the other ISPs we tested. We escalated to ISP A and they say that everything is working properly on their end and the problem is with ISP B. They claim they "have no partnership with ISP B and therefore cannot create a ticket to get it resolved". I tried calling ISP B but I get nowhere because I am not a customer of theirs.
My solution is to give ISP A the boot, but management has denied that request because of the amount of effort required to switch over. How I can escalate this? Is there anyway to go over and above the ISPs?
View 4 Replies
ADVERTISEMENT
Jul 27, 2011
I have a local DSL line in our remote office. We are connecting a microwave antennae that carries our main office internet to the remote office.I want to be able to connect both paths to a Layer 3 switch and route traffic through the main office with the router connected to the DSL as a fail-over solution.I would really like to stick with HP Procurve's if possible.
View 3 Replies
View Related
Sep 4, 2012
Is this a wired or wireless connection issue? Both Who is your Internet Service Provider (ISP)? Comcast..What type of Broadband connection are you using? Cable..What is the exact Make and Model of your Modem, Router or Modem/Router Combo - (Main)Netgear WNR3700v2 / WNR2000v3(secondary) My current setup is the 3700 router is taking the internet from the modem cat5e and spewing the wireless. I would like to have the secondary router use the wireless from router 1 as the internet source and push the internet out of the 4 hardline ports so I can plug my upstairs xbox 360 into the router via cat5e. I'm just kinda new to this and still learning so I'm not sure how to configure the router to do this. I can get into the settings of the router just fine but finding the right settings to tweak is a little difficult.
View 3 Replies
View Related
Feb 16, 2011
The whole thing about IPv6 has been out for what is probably a couple of years now. But I find it very odd how even my newest modem/router can't even support it yet. Why on earth are manufacturers such as Netgear holding back so much on making their products IPv6 compatible? The IANA has just about given out what is left of the addresses, and we still have time to adapt by working our way over to IPv6 as it can work simultaneously with IPv4. Companies have been given years to prepare.
Why can't I connect to the Internet right now using IPv6? Not only is my router holding me back, but will my ISP hold me back as well?
View 1 Replies
View Related
Feb 28, 2012
I purchased an IP Cam for my girl friend to monitor her dog, she lives in an apartment complex that provides internet. I have been able to get the camera setup at my house to be accessed through the internet. I have a cable modem and a router, setup a dyndns account, port forwarded my router and boom it worked. Went to my gf's apartment and I didn't think of it at first until I was frustrated, but realized the apartment complex probably has a router of its own. I can access the cam on her LAN but not through the internet.
View 3 Replies
View Related
Mar 31, 2011
I have att dsl and they supplied me with a modem, a motorola model type 2210, and my belkin surf N300 router is giving me issues connecting to the internet. Im pretty sure my wireless network adapter is a netgear wg311v3.The issue im having is that sometimes i can connect to the internet just fine, and sometimes i cant connect to the internet. I know it is a router issue because when i plug the modem into my comp, i can access the internet 100% fine.I also think it is not a wireless network adapter issue because i ran an ethernet cable from the router to my comp and had the same issues. There are 2 other computers on the network, one of them is a year or two newer than my dell desktop, and has no issues whatsoever connecting to the internet via the router. The other computer on the network is a Wii, and has connection issues when playing online (probly a different issue), but can access the internet no problem.
View 1 Replies
View Related
Apr 6, 2011
Basically, I was following instructions of how to forward a port to get higher speeds on bitcomet.After doing allsorts which I don't understand (yes, very stupid I know, but I've learned my lesson now), I restarted my computer and have since been unable to connet to the internet.
I have tried a system restore which didn't work and also searched google for hours but to no avail.When I diagnose the problem with windows,it states," "Wireless Network Connection" doesn't have a valid IP configuration.I am running Windows 7 btw.
View 5 Replies
View Related
Mar 4, 2013
In recent days, there was an electrical fault and my computer does not automatically connect to the wireless network in the house, since then. I do not know what happened.
View 1 Replies
View Related
Dec 18, 2012
I have a little problem with installing my new router. There were quite a lot of problems with the old smc, so I've bought a TP-Link router. I installed it just alright, it said congratulations, you have internet. I don't have though, not even on the directly plugged computer. It's kind of frustrating, since the old router is still working like before. So I plugged an ethernet cable from the old router's lan to the tp-link wan and with that, the new network is working just fine. The problem with the internet access occurs only, if the router is directly plugged to the modem. (The computers do find the network but the connection is kind of offline.) I don't really know what could be the problem, since I'm a little new to routers. I've read almost everything in the new router's manual and I'm pretty sure it's installed correctly. (ADSL username and password copied from the old settings, mac address copied, all ip addresses pinged, done power cycle etc..) I thought about resetting the modem, but I'm a bit afraid of losing the old router's internet connection as well.
View 8 Replies
View Related
Aug 20, 2012
Just yesterday my laptop could connect to the Internet. Now it would just connect to the modem (via wi-fi), and there would be no Internet connection. All other computers in my house using wi-fi work fine.Here are my results when I type in the ipconfig /all in the command prompt.
Configuration IP de Windows
Nom de l'h�te . . . . . . . . . . : Loc-PC
Suffixe DNS principal . . . . . . :
Type de noeud. . . . . . . . . . : Diffusion
Routage IP activ� . . . . . . . . : Non
[code]....
View 6 Replies
View Related
Dec 12, 2012
I have reset the modem but after resetting it I can't go for internet anymore with computer or wifi . And after that I notice that my wifi is not under any security which is free for all.can I know how to fix this problem ?the main problem is mostly that can't go internet after reset it
View 2 Replies
View Related
Feb 23, 2011
my desktop is picking up wirelessinternet, i have 2 avalible ethernet ports on it, is their a way i can plug an ethernet from my computer to my xbox to play online, i dont want to have a cable come from the router.
View 1 Replies
View Related
Mar 31, 2012
can i connect to internet without settings in modem is dat possible?
View 3 Replies
View Related
Jan 23, 2013
Basically I have a win2000 server running as a VM in my computer with a secondary LAN address(Different subnet) which acts as a gateway for the other devices on my network (e.g. my wifi-router has DHCP relay set to my VM's address). The VM uses another network(internal NAT) for accessing the Internet though my computer. So far, I've managed to set up the DHCP and routing. Other devices on my network have access to the internet. But, since my computer has only one NIC, and even though the VM uses a secondary IP address, it's still on the same network as my internet connection. There are computers that belong to other people, who I do not want to give access through my router(even though their computers are picked up by my DHCP). I was given only one IP address for usage on my computer. This is why I wanted to add some kind of an authentication procedure(like some sort of PPPoE login maybe?)so as to prevent unauthorized usage my my connection. The question is, 'What are my options for the authentication procedure, and where do I start?' If my explanation was unclear.
View 6 Replies
View Related
Mar 20, 2011
We have Linkline ADSL that was set up by them with a Netopia 2241N-006 modem and a Cisco 33674 wired router. We got a Cisco E2000 wireless router to replace the wired one. It sets up perfectly, in that I can see and connect to the wireless router just fine, but it has no Internet connection. Also, when we plug the cord straight from the modem into the computer (as was suggested by someone) it has no Internet connection, so it seems we need the Netopia modem for it work.I have connected to Cisco live chat three different times to try and find out how to make this work, and each time after making me give them all the information they insisted the uninstalling/reinstalling Cisco connect and then going through set up again it would work. On the second and third chats I even gave them the reference numbers for the previous chats so theiy could see that is what was already done, to no avail. Apparently that is the only solution they know.Then I called Cisco support on the phone (twice). The first time they insisted I hang up and I repeat the same procedure from the chats, even though I explained I had now done it three times and gave them the chat reference numbers. They said if I would not do that. The second time I called they told me that was not something they supported - using their router with an adsl modem - even though their instructions do cover it.
using the two routers together since I cannot get the wireless one to work alone. I went and bought a crossover cable, hooked the two routers LAN port to LAN port, changed the router's IP address to just outside the main router's range and disabled DHCP. This did not change anything, so I tried the one other idea I found online which was to assign the router a static IP address in the same range that the rest of the network is using, hook the two routers LAN port to LAN port with the crossover cable, and disable the DHCP. This did not work either.
View 8 Replies
View Related
Jul 15, 2012
well i had the same problem because i got bored and i was like hmm i wonder if i can change my IP and i tried it and i had the same problem but when i did system restore it still did not work, now i have to get a new operateing system...
View 10 Replies
View Related
Feb 4, 2012
My wireless connection shoes connected but no internet access. when i connect directly to the modem to computer internet is ok. i am using linksys wrt400n route
View 17 Replies
View Related
Aug 11, 2011
I have a d-link dslg604t, i tried to do the frimware upgrade and it froze in the process. Now the internet doesn't work at all. I have uninstalled the drivers, reset the modem and it indicates the modem is working as in i have the two monitors and the blue flashing light between them shown, also all the network settings are there. DHCP is assigned automatically etc etc. I can ping the modem but when i try to connect to the internet i get "detecting proxy server", "internet explorer cannot display the page". "FTP (passive)- Error 12007 connecting to ftp microsoft.com
View 1 Replies
View Related
Sep 4, 2012
My router is not connecting my laptop to the internet. The icon at the bottom states that I am connected and have an excellent connection.checking the router, starting and restarting router but still no connection.
Windows XP
HP laptop
Verizon ISP
View 3 Replies
View Related
Jan 26, 2012
I have a windows 7 laptop and i have bridged my wireless with my ethernet port on it, i have directly connected my ubuntu server to my windows 7 laptop via crossover, and ubuntu says its connected, but it will not recieve internet. I can get 2 windows pc's to bridge successfully, but not a linux machine. Is there some configuration im missing or something that i missed? the goal is to get internet for my ubuntu server.
View 3 Replies
View Related
Jan 13, 2013
I had this problem for 3 months now, at random times I get no connection and the LAN led 1 in my router (which I am connected to) just keep blinking very fast, ADSL and ACT leds are just on. I tried to troubleshoot the problem and it detected 2 problems: "default gateway is not available" and "local area connection doesn't have a valid IP". even when it says that it is fixed, seconds later the problem is still there (sometimes it gives me one problem only). I tried many solution on the forum including reseting the router, disabling the laptop's wireless modem (I'm on a laptop) and even trying ipconfig/release - ipconfig/renew. everything is up to date and I update my antivirus (and it has auto update enabled). here are my specs:
Broadband connection: DSL
Router Make/Model: TP-LINK TP-8840
Anti-virus: Avira free anti-virus
ipconfig data:
[Code].....
View 19 Replies
View Related
Nov 8, 2012
Applications such as skype, teamviewer, etc, are all working fine, however, when I try to load certain webpages, such as Facebook and forum boards, they don't load, just stay white screen.
Youtube, google, both load, I imagine this is because they're both on the Google servers, apart from any Google related sites, I can't find any that will load for me.
I think this is a problem wth my DNS addresses, I've tried a range of solutions, clearing my DNS, changing my IPv4 address, restarting the router, PC, but I can't seem to find a fix.
Running on windows 7 Home premium
NOTE: I had the Metropolitan police virus yesterday, I did a system restore to remove it, my internet worked fine after, it's only since I've moved from the router at my other house, to the one here that I'm having problems.
View 1 Replies
View Related
Jun 2, 2011
I have a Airtel Internet Broadband connection and I have a lan having around 10 workstations. I have another computer which I want to use as a server through which all the internet traffic will pass. The server has two lan cards(one on motherboard and other one is usb).I have connected broadband modem to lancard1(on motherboard) and have connected the lancard2(usb) to the lan switch.Now how to proceed further, so that internet service is available on all the workstations connected to the lan switch.
View 4 Replies
View Related
Apr 2, 2012
i have tryed starting it on the services but that willl not do it eitheir. i have tryed almost everything and it stilll does not work. i can not access internet. plus i think a virus messed up my internet protocols. i think i removed the virus though i have been looking for an answer for 7 hours now
View 1 Replies
View Related
Jun 11, 2011
How i can change my ip address without changing my internet connection??
View 3 Replies
View Related
Mar 9, 2013
I had a power outage while online and when power resumed, I was no longer able to connect to the internet via my wireless router. My laptops (I have 2, work and personal) both receive the wireless signal from my router (a Linksys WRT54GC) but I get a 'DNS lookup failed' error message when trying to access the internet. My standard set up was Arris cable modem-->Linksys router-->Laptop but I've had to go cable modem-->Laptop via Ethernet in order to access the internet.
Both laptops are running WinXP Pro, SP3 and I ran 'ipconfig/all' on my work one, once when connected via Ethernet and once when I had my wireless connection enabled (but again, not connected to the internet). Results below.
Ipconfig/all when connected via Ethernet to cable modem:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and Settingsm03015a>ipconfig/all
[Code].....
View 19 Replies
View Related
Jul 4, 2012
I have TP-LINK TL-WR740N router and I am trying to configure it to work with my Broadband cable over PPPOE.The router once configured show status as connected with a proper IP and DNS servers. When I use the routers inbuilt ping utility to ping Google or any other site I get a reply.But when I connect my computer to the router on the LAN port I see no internet on my computer. I am able to ping the router address but not google.I tried disabling all Firewalls and Antivirus I have but problem still the same.Also I tried connecting over WIFI but still no internet.I also called up TP-LINK helpline several time and got my router replaced. They also tried a few settings on my machine but no success.
View 1 Replies
View Related
Apr 1, 2011
Recently I connected a Linksys wrt54g broadband router so that my daughter could also be online. the problem i have developed is that while I have the router connected to my network, my internet keeps kicking me off. When I disconnect the router my internet stays on and I have no problems with it. I am working with a custom built PC with quad core processor, 4 gigs of RAM, nvidia graphics card
View 1 Replies
View Related
Dec 14, 2011
I've got a problem with my Linksys E1000 router. When I bought it, it worked without trouble. Setup was easy and straight forward and I was able to connect all my wireless devices (2 latops, a mobile) without any problem. Then, after two months or so, I noticed the laptops were losing internet connection (or not finding the wireless network on start up). Rebooting the router seemed to work the first couple of times to restore the wireless connections, but after a few more days, the wireless network either shows up and the devices are unable to connect to it OR the wireless network does not appear in the network list. However, the wired connection to my desktop PC via ethernet cable has no issues at all. My conclusion is that these wireless routers (E1000) have a defect in the radio card.
View 6 Replies
View Related
May 13, 2012
I bought yesterday a wireless modem/router and Tp-Link Adsl2+ N300 Modem Router Td-W8960n.I have 2 laptop computers at home.The first issue I have is that with one of the laptops (quite old - Acer Aspire 2420-2579 with Windows Vista Basic Service Pack 1) I can not connect (wireless) to the internet. It says local access only. However in other countries (IM in NZ) it does connect to internet. It does work when I use an Ethernet cable between my router and the laptop. The second issue is with my other laptop. A HP Pavillion DV-4 windows vista home premium service pack 2. I manage to get wireless access to the internet but every couple of minutes the connections drops and starts again by itself�. After 1-2 min approx�. it is getting pretty annoying!I don�t think it is the routher as I also have an XBOX 360 connectet to the internet usign the same device and works absolutely fine!
View 6 Replies
View Related
Jan 12, 2012
I'm looking into a way of routing users internet connection based on their username or group in a windows environment. Currently there's two ISP connections with their own proxy server. I want a user to be fully redirected to one of the ISPs based on who they are. I was hoping via IE proxy settings, this can be accomplished, but it looks like the primary ISP connection, is still getting most of the connections/routing.
View 1 Replies
View Related
May 29, 2011
I have a Compaq mini CQ10-100 Netbook, and I am trying to Make a Wireless internet connection through a D-link router. My ISP is Cox Cable. The Netbook is connected to my wireless network, but will not connect to the internet. It keeps asking me to transfer information, via thumb drive, from a wireless access point, but my router is my wireless connector and it doesn't have a USB port to plug in a thumb drive. How do I get this netbook hooked up to the internet?
View 1 Replies
View Related
Apr 5, 2011
I have got a PC at work (Windows XP Pro SP3) that is on two networks with the IPs 10.20.30.167, subnet 255.255.255.0 (internet enabled) and 10.0.0.20, subnet 255.255.255.0 (no internet). On the 10.0.0.X network there is a gateway with the IP 10.0.0.200 allowing access to another network; 192.168.60.X, subnet 255.255.255.0 (no internet). I have added the route on my work PC to access the 192.168.60.X network via this gateway and I can access all PCs on all three networks from this PC.Now, I am using LogMeIn Hamachi so that I can access the networks at work from home. The PC at work is the 'gateway' PC on the Hamachi network. When installing Hamachi it created a new network connection and bridged this connection with my 10.20.30.167 network adapter to allow access to the 10.20.30.X network from an external PC when connected using the Hamachi VPN connection. I have manually configured my Hamachi connection on my PC at home to the IP 10.20.30.169, subnet 255.255.255.0, with the default gateway set to 10.20.30.167. I can ping all computers on the 10.20.30.X network from my PC at home.
I then added a route on my PC at home for 10.0.0.X to go via 10.20.30.167 (the 'gateway' on the Hamachi network). I also enabled IP forwarding on the 'gateway' PC (my PC at work). I can not ping any PC on the 10.0.0.X network from my PC at home apart from 10.0.0.20 (the other NIC in the Hamachi gateway PC) and 10.0.0.30 (another PC on the 10.20.30.X network that is also on the 10.0.0.X network).Now, with IP forwarding enabled on the Hamachi gateway PC I would assume after adding the route on my PC at home for 10.0.0.X traffic to go via 10.20.30.167 that I would be able to ping all PCs on the 10.0.0.X network...I also tried adding a route on my home PC to send all traffic for the 192.168.60.X network via 10.20.30.167 which has a route via 10.0.0.200 to the 192.168.60.X network, but this also did not work.I then tried adding the 10.0.0.20 network adapter into the network bridge that the Hamachi connection made, also keeping both IPs (10.20.30.167 and 10.0.0.20) on this network bridge by adding them into the 'IP Settings' in the 'Advanced TCI/IP Settings'. I also added the 10.0.0.200 gateway for good measure. I still cannot ping any PC on the 10.0.0.X or 192.168.60.X networks from my PC at home.
I have also added the route to the 10.20.30.X network on a PC on the 10.0.0.X network to go via 10.0.0.20 and tried pinging a PC on the 10.20.30.X network but this also has not worked. Also setting the default gateway on a PC on the 10.0.0.X network to 10.0.0.20 does not allow this...Surely bridging the networks 10.20.30.167 and 10.0.0.20 on my work PC would allow another PC on the 10.0.0.X network to access the 10.20.30.X network after adding the route or setting 10.0.0.20 as the default gateway?
View 2 Replies
View Related
