Protocols / Routing :: Users Internet Connection Based On Their Username Or Group In A Windows Environment?
Jan 12, 2012
I'm looking into a way of routing users internet connection based on their username or group in a windows environment. Currently there's two ISP connections with their own proxy server. I want a user to be fully redirected to one of the ISPs based on who they are. I was hoping via IE proxy settings, this can be accomplished, but it looks like the primary ISP connection, is still getting most of the connections/routing.
View 1 Replies
ADVERTISEMENT
Apr 28, 2012
My host has an IP of 20.168.1.2 from a router DHCP. I have a virtual environment which has a DC and DNS and the IP is: 192.168.1.x how can I get access from my host to the virtual environment? What do I need to setup on the host OS? (Windows)
View 3 Replies
View Related
Jun 26, 2012
I did not know the username and password for my DI-524 so I wanted to do a reset...used a paper clip and held the reset button for ten seconds, unplugged it, powered it up, and as per online instructions tried to type in 192.168.0.1 to access the username and password field so that I could enter "admin" and blank password. Here's where my lack of knowledge comes in. I am working off a MacBook with no Ethernet connection, just wifi. Is what I am trying to do even possible? Or does the computer I configure the router with have to be hardwired to the Internet while I do it?
View 1 Replies
View Related
Nov 14, 2011
I'm going to a relative's house, and they only have one computer, running Windows XP, with a wired connection. We're planning on bringing our laptops, and would prefer WiFi. There are no open networks near us we can use. So, is there an application for Windows XP that is painless to install/uninstall that would allow us to create an access point from that computer?
View 1 Replies
View Related
Jan 26, 2012
I have a windows 7 laptop and i have bridged my wireless with my ethernet port on it, i have directly connected my ubuntu server to my windows 7 laptop via crossover, and ubuntu says its connected, but it will not recieve internet. I can get 2 windows pc's to bridge successfully, but not a linux machine. Is there some configuration im missing or something that i missed? the goal is to get internet for my ubuntu server.
View 3 Replies
View Related
Feb 23, 2011
my desktop is picking up wirelessinternet, i have 2 avalible ethernet ports on it, is their a way i can plug an ethernet from my computer to my xbox to play online, i dont want to have a cable come from the router.
View 1 Replies
View Related
Mar 20, 2011
We have Linkline ADSL that was set up by them with a Netopia 2241N-006 modem and a Cisco 33674 wired router. We got a Cisco E2000 wireless router to replace the wired one. It sets up perfectly, in that I can see and connect to the wireless router just fine, but it has no Internet connection. Also, when we plug the cord straight from the modem into the computer (as was suggested by someone) it has no Internet connection, so it seems we need the Netopia modem for it work.I have connected to Cisco live chat three different times to try and find out how to make this work, and each time after making me give them all the information they insisted the uninstalling/reinstalling Cisco connect and then going through set up again it would work. On the second and third chats I even gave them the reference numbers for the previous chats so theiy could see that is what was already done, to no avail. Apparently that is the only solution they know.Then I called Cisco support on the phone (twice). The first time they insisted I hang up and I repeat the same procedure from the chats, even though I explained I had now done it three times and gave them the chat reference numbers. They said if I would not do that. The second time I called they told me that was not something they supported - using their router with an adsl modem - even though their instructions do cover it.
using the two routers together since I cannot get the wireless one to work alone. I went and bought a crossover cable, hooked the two routers LAN port to LAN port, changed the router's IP address to just outside the main router's range and disabled DHCP. This did not change anything, so I tried the one other idea I found online which was to assign the router a static IP address in the same range that the rest of the network is using, hook the two routers LAN port to LAN port with the crossover cable, and disable the DHCP. This did not work either.
View 8 Replies
View Related
Apr 15, 2012
I can't find any information that the AP1231G-A-K9 AP is supported in a 5508 Controller Based environment with Prime NCS.Could one of the experts confirm or deny?
View 1 Replies
View Related
Apr 2, 2012
i have tryed starting it on the services but that willl not do it eitheir. i have tryed almost everything and it stilll does not work. i can not access internet. plus i think a virus messed up my internet protocols. i think i removed the virus though i have been looking for an answer for 7 hours now
View 1 Replies
View Related
Jun 11, 2011
How i can change my ip address without changing my internet connection??
View 3 Replies
View Related
Feb 6, 2012
We have Cisco Cat4503 series L3 Switch and Cisco L2 2560 Series Switches, some of the users want to have a dynamic VLAN membership, and connecting with the network as mobile users,
can it possible and create dynamic VLAN for specific group of users.
View 6 Replies
View Related
Oct 30, 2012
How to control the speed and datausage for different users in wifi using java.
View 3 Replies
View Related
Feb 23, 2012
I have been tasked with attempting to setup an enviroment that allows users to VPN from home and use Dameware to connect, from home, to another machine in another users home that is VPN'd into the same network. Is this possible?
We are using 2 5520 ASA's and CiscoAnyConnect.
View 1 Replies
View Related
Mar 23, 2013
In my ACS 5.4 I want to have same useranme to use two shell profiles. Here is the requirement.One shell profile with privelege 15 for IOS device admin and other one with different privelege for WCS admin.As there can't have two shell profiles on the same authroization profile, I created two different profiles, and match with the ACS local group name. However whenever user tries to access it always hits the 1st profiles.
View 3 Replies
View Related
May 29, 2011
I have a Compaq mini CQ10-100 Netbook, and I am trying to Make a Wireless internet connection through a D-link router. My ISP is Cox Cable. The Netbook is connected to my wireless network, but will not connect to the internet. It keeps asking me to transfer information, via thumb drive, from a wireless access point, but my router is my wireless connector and it doesn't have a USB port to plug in a thumb drive. How do I get this netbook hooked up to the internet?
View 1 Replies
View Related
Mar 28, 2012
My question is on ASA and ACS5.2 users.Have my ASA SSL VPN and IPSEC VPN, the my ACS5.2 many users, for example, wireless user.I would now like to establish an independent user group, only the VPN user name and password, while both the ASA VPN can only allow users in this independent group of ACS5.2 VPN login, how to configure?
View 1 Replies
View Related
Jul 6, 2011
I have a network set up with file sharing. I use a Windows 7 PC to host files that are shared with around 8 other PCs - some on Windows 7, some on Windows XP. The file sharing works but sometimes some users are unable to get access to the files. The error message is something like PCNAME is not accessible...
View 2 Replies
View Related
Jan 15, 2012
Can I use AAA Radius on a ASA 5505 to block outgoing user access by user name in a group?
View 2 Replies
View Related
Apr 30, 2012
I am configuring a new ACS 5.3 system. Part of the rules is that I want to match the users specific AD group membership, and match appropriatly to an identity group.What i'm trying to do is say that if the user is a member of the AD Group (G-CRP-SEC-ENG) then associate them with the Identity Group SEC-ENG. The under the access service, authorization portion, i assign shell profiles and command sets based on Identity Group.It seems that the ACS server will not match the AD Group for the user, and it will match the Default of teh Group Mapping portion of the policy every time.
I tried several configuration choices from : AD1:ExternalGroups contains any <string showing in AD>, AD1:memberOf <group>.Is there something special i need to do in the Group Mapping Policy to get it to match and active directory group and result in assigning the host to an Identity Group?
View 7 Replies
View Related
Jul 6, 2011
I have a network set up with file sharing. I use a Windows 7 PC to host files that are shared with few other PCs - some on Windows 7, some on Windows XP. The file sharing works but sometimes some users are unable to get access to the files. It seems to be only on the machines that are on XP that this problem occurs. The error message is something like \PCNAME is not accessible...
The user can connect if the machine storing the files is restarted but it will happen 4-5 times during the day.
View 4 Replies
View Related
Apr 18, 2011
I'm trying to configure ACS 5.2 to assign the VLAN to a user dynamically based on the AD group that the user belongs to. I've gone into:
Users and Identity Stores -> External Identity Stores -> Active Directory -> Directory Groups tab
and selected the group name from the AD. If I understand correctly, I should now see this group under:
Policy Elements -> Authorization and Permissions -> Network Access -> Authorization Profiles -> Common Tasks -> VLAN ID/Name
However, it does not. Am I missing something?
View 2 Replies
View Related
Jan 29, 2011
I have a home pc running Windows 7 ultimate that I can't connect through RDP/VNC from an external network. I can connect internally from an other computer connected to network though.
1.Remote Assistance is allowed with "Allow connections from computers running any version of remote desktop" selected.
2.Network Discovery is turned on.
3. Accept incoming connections in TightVNC checked.
4. Ports 3389, 5800, 5900 forwarded to my internal IP hosting VNC/RDP servers which is 192.168.1.64 inside my router. Also have tried putting computer/private IP into DMZ Mode which made no difference.
ISP: AT&T DSL
Modem/Router: 2wire 2701HG-B.
ports forwarded: 3389, 5800, 5900 to computer hosting VNC/RDP server
Windows Firewall: Off
security software: None
I've also had my friend try to RDP/VNC to me and it didn't work. I have registered with [URL] and have the dynamic dns update tool installed on the same computer. Tried to access with my no-ip.com name but that doesn't make a difference.
View 6 Replies
View Related
Jan 18, 2012
How do I...add a dos based computer to a network running windows 2003
View 1 Replies
View Related
Apr 8, 2013
I needed to change my password to my wifi so after watching a youtube video I followed these instructions:Go to search program files : cmd Enter: ipconfig Get gateway ip address Go to internet explorer enter ip address Once admin log on comes on log on and I went on to change wireless password Once I did change password after that it would not comment to my wireless wifi Connection. I once again went to cmd then ipconfig where there it then said media disconnected. I mess something up since now nothing can connected to WiFi?
View 1 Replies
View Related
Apr 15, 2013
I am deploying ISE with WLC 7.4. I have two SSID(s) running in my network 1. Corporate & 2. Services. I have a domain setup lets say "AD.com" with 4 groups 1. Corporate, 2. Services, 3. Employees, 4. Contractors.Here is an example of the scenario that I want:
AD.com Group : Corporate's User : 1. C_USER1
2. C_USER2
3. C_USER3
4. C_USER4
5. C_USER5
[code]....
Now what I want to do is have 802.1x authentication on my Corporate SSID that will check in AD.com, ONLY AND in ONLY corporate group for authentication. That is only C_USER1 to C_USER5 are allowed to connect to it. Users from any other AD group shouldnt be authenticated on this SSID.The same for the services group & SSID.
View 2 Replies
View Related
Jan 6, 2011
My customer requires the hostport on an access switch to be allocated to a specific Vlan based upon the AD Group that the user is a memeber of ? I am planning to setup NAC in a Real Gateway OOB deployment, using an ACS 5.2. I was initially thinking that the initial authentication server would be the ACS and then the AD, which using group mappings within the AD, I could then assign the user to a specific ACS group and then pass a Radius attribute back to the NAC manager for processing?
View 2 Replies
View Related
Feb 10, 2011
I have a Cisco ASA (8.2) with several group-policies setup. By default, I can hit the SSL page, and have a selection of available group-policies for a user to login to. I want to have different ACLs for each group, to go along with the subnet that each particular group hands out. Right now, as long as a user is authenticated through AAA, they can log in to any group they select, and therefore, have more permissions than another group.
I know how to hide the list, but I need to be able to assign a specific group to a user based on an attribute in ACS.
I've setup ACS to use the "CVPN3000/ASA/PIX7.x-Tunnel-Group-Lock" Atttribute, to which I match the group-policy name in the ASA, to the attribute on the user account in ACS.This doesn't seem to work, and it just throws the user into DfltGrpPlcy, which doesn't give the user anything. So it's either wide-open, or it's broken.
I'm using RADIUS authentication and not TACACS, so it should retrieve the attributes, and according to the ACS, it grabs the attribute during the authentication process.
View 1 Replies
View Related
Aug 26, 2009
Looking to fine tune Cisco IPSec client RA-VPN authentication on our ASA-5510. Currently using NT Domain authentication. It's been working fine for quite a while but is too broad a brush. It authenticates anyone who is in the domain. We need to only authenticate folks who are in a specific AD remote access security group. I'm testing LDAP but am getting the same results. I can get it to authenticate based on overall domain membership but can't seem to figure out how to check group membership.
We've updated to ASA 8.2(1) and ASDM 6.2(1). It seems to have more LDAP functionality but I'm not an LDAP expert. I've posted an image of the LDAP server dialog from the ASDM. I originally tried putting the Group DN in the Base DN field but kept getting a "can't find user" error when testing. I also tried adding the group info in the "LDAP parameters for group search" field at the bottom. But it doesn't seem to be looking there. Note that the current value is the Group Base DN only. I also tried putting "memberOf=" in front of that. Still no luck. The values shown in the image work for simple domain membership.
View 3 Replies
View Related
Sep 2, 2012
I have two computers. Computer A is connected to the internet through GSM network. Computer A also have NIC adapter which is connected to local network with IP 192.168.33.10/24.
Computer B in connected to internet with DSL connection.
On both machines I use TeamViewer to make VPN secure tunnel between this two computers. Computer A gets IP:7.200.100.2 Computer B gets IP:7.200.100.3
How can I access from computer B to specific device with IP 192.168.33.250 which is on local network of computer A?
Is it possible to route traffic from VPN to other local network, or it is some possibility to use port forwarding from VPN connection to specific IP address on the local network to specific port number?
View 1 Replies
View Related
Apr 19, 2010
I'm actually require authentication for users who are coming from the PublicVLAN (the vlan associated with the wireless hotspot) to authenticate themself to the LDAP server via my firewall ASA 5510
View 12 Replies
View Related
May 23, 2011
We have gotten a tv with wireless capability.I do not remember the WEP key.I currently have my laptop pc and a HP printer working with my D Link router. I have gotten as far at the set up page for the router and am wondering if I change the WEP key, will it automatically update the existing devices (my laptop and printer) or will they be locked out? Can I use the same code for all 4 WEp keys ?
View 6 Replies
View Related
Sep 26, 2011
recently we had a small blackout but electricity came back almost immediately. After that I had problems connecting to the internet with one of my wired connection computers (Windows XP). Connection has a Limited or no Connection status and the problem seems to be that the network doesn't assign a new ip adress.
C:Documents and SettingsAdministrator>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : paloalto
[Code]....
View 18 Replies
View Related
Sep 20, 2012
I would like to know about asa 5500-x. Does it supports application visibility and granular control for different applications. Moreover bandwidth control based on different users and different applications
View 1 Replies
View Related
