Cisco AAA/Identity/Nac :: ASA-5510 / IPSec Client Authentication Based On AD Group Membership?
Aug 26, 2009
Looking to fine tune Cisco IPSec client RA-VPN authentication on our ASA-5510. Currently using NT Domain authentication. It's been working fine for quite a while but is too broad a brush. It authenticates anyone who is in the domain. We need to only authenticate folks who are in a specific AD remote access security group. I'm testing LDAP but am getting the same results. I can get it to authenticate based on overall domain membership but can't seem to figure out how to check group membership.
We've updated to ASA 8.2(1) and ASDM 6.2(1). It seems to have more LDAP functionality but I'm not an LDAP expert. I've posted an image of the LDAP server dialog from the ASDM. I originally tried putting the Group DN in the Base DN field but kept getting a "can't find user" error when testing. I also tried adding the group info in the "LDAP parameters for group search" field at the bottom. But it doesn't seem to be looking there. Note that the current value is the Group Base DN only. I also tried putting "memberOf=" in front of that. Still no luck. The values shown in the image work for simple domain membership.
View 3 Replies
ADVERTISEMENT
Jan 6, 2011
My customer requires the hostport on an access switch to be allocated to a specific Vlan based upon the AD Group that the user is a memeber of ? I am planning to setup NAC in a Real Gateway OOB deployment, using an ACS 5.2. I was initially thinking that the initial authentication server would be the ACS and then the AD, which using group mappings within the AD, I could then assign the user to a specific ACS group and then pass a Radius attribute back to the NAC manager for processing?
View 2 Replies
View Related
Apr 15, 2013
I am deploying ISE with WLC 7.4. I have two SSID(s) running in my network 1. Corporate & 2. Services. I have a domain setup lets say "AD.com" with 4 groups 1. Corporate, 2. Services, 3. Employees, 4. Contractors.Here is an example of the scenario that I want:
AD.com Group : Corporate's User : 1. C_USER1
2. C_USER2
3. C_USER3
4. C_USER4
5. C_USER5
[code]....
Now what I want to do is have 802.1x authentication on my Corporate SSID that will check in AD.com, ONLY AND in ONLY corporate group for authentication. That is only C_USER1 to C_USER5 are allowed to connect to it. Users from any other AD group shouldnt be authenticated on this SSID.The same for the services group & SSID.
View 2 Replies
View Related
Dec 21, 2012
I have a working ASA 5505 that is used for remote access. It authenticates users via RADIUS (Microsoft AD using two IAS servers), it also authorises users via LDAP and it does some LDAP attribute mapping to get group membership for DAP. This is all working fine however recently I enabled IPv6 to do some testing. I have a /126 subnet on the Inside interface (maps to its equivalent /30 IPv4 subnet) and OSPFv3 running so the ASA has visibility of the internal IPv6 networks. DNS client is enabled in the ASA and all the authentication servers are entered as hostnames. The two RADIUS servers only have A records and the two LDAP servers (Windows DC's) have both A and AAAA records. My plan was to begin test IPv6 on the AnyConnect VPN clients (once I was happy the ASA was working fine with IPv6).
When I initially enabled IPv6 everything continued to work as before, however I had to reboot the ASA today and after it all came back up authorisation stopped working. I did a bit of troubleshooting and the ASA is complaining of not being able to resolve the addresses of the two LDAP servers. From the CLI I can ping the hostnames and the LDAP servers resolve to IPv6 addresses and the RADIUS servers resolve to IPv4 addresses. When I issue the command 'show aaa-server LDAP' (LDAP is the name of the group) I see the servers listed but the address displays 0.0.0.0:
Prior to the reboot both the LDAP servers were showing thier addresses (IPv4) correctly. I can workaround it by disabling IPv6 on the ASA, letting it lookup the (IPv4) addresses of the LDAP servers (so they appear in the 'Server Address:' field above) and then re-enabling IPv6. Strangely deleting and re-adding the servers just with their IPv4 addresses also fails but I haven't fully tested this. I don't know but I think I would have the same behaviour if the RADIUS servers also had AAAA records.
I assume when IPv6 is enabled on the ASA it will perform AAAA lookups as well as A lookups but the LDAP client cannot use IPv6? Just guessing at the moment as I haven't managed to get a LAN capture. [code]
View 1 Replies
View Related
Apr 30, 2012
I am configuring a new ACS 5.3 system. Part of the rules is that I want to match the users specific AD group membership, and match appropriatly to an identity group.What i'm trying to do is say that if the user is a member of the AD Group (G-CRP-SEC-ENG) then associate them with the Identity Group SEC-ENG. The under the access service, authorization portion, i assign shell profiles and command sets based on Identity Group.It seems that the ACS server will not match the AD Group for the user, and it will match the Default of teh Group Mapping portion of the policy every time.
I tried several configuration choices from : AD1:ExternalGroups contains any <string showing in AD>, AD1:memberOf <group>.Is there something special i need to do in the Group Mapping Policy to get it to match and active directory group and result in assigning the host to an Identity Group?
View 7 Replies
View Related
Apr 18, 2011
I'm trying to configure ACS 5.2 to assign the VLAN to a user dynamically based on the AD group that the user belongs to. I've gone into:
Users and Identity Stores -> External Identity Stores -> Active Directory -> Directory Groups tab
and selected the group name from the AD. If I understand correctly, I should now see this group under:
Policy Elements -> Authorization and Permissions -> Network Access -> Authorization Profiles -> Common Tasks -> VLAN ID/Name
However, it does not. Am I missing something?
View 2 Replies
View Related
Apr 15, 2010
I have configured a lab for RA VPNs with a ASA5510 software version 8.2 and VPN Client 5 using digital certificates with Microsoft CA on a Windows 2003 server. I did the configuration based on this document from Cisco website: URL
Now the vpn works just fine, but now I need to configure different tunnel-groups so I can provide different services to different users. The problem I have now is that I don't know how to configure it so the certificate matches the tunnel-group name. If i do a debug crypto isakmp on ASA I get this error messages:
%ASA-7-713906: IP = 165.98.139.12, Trying to find group via OU...%ASA-3-713020: IP = 165.98.139.12, No Group found by matching OU(s) from ID payload: Unknown%ASA-7-713906: IP = 165.98.139.12, Trying to find group via IKE ID...%ASA-3-713020: IP = 165.98.139.12, No Group found by matching OU(s) from ID payload: Unknown%ASA-7-713906: IP = 165.98.139.12, Trying to find group via IP ADDR...%ASA-7-713906: IP = 165.98.139.12, Trying to find group via default group...%ASA-7-713906: IP = 165.98.139.12, Connection landed on tunnel_group DefaultRAGroup
So basically when using certificates I always connect the RA VPN only with the default group DefaultRAGroup. Do I need to use a different web enrollment template for certificate request instead of the user template??? How can I define the OU on the User certificate so it matches the tunnel-group???
View 3 Replies
View Related
Apr 25, 2011
I'm sure it can be done just haven't been able to find it. I'm running ACS 4.2 and have 2 network groups, one is wireless where I have a WLC and the other is the default where vpn users authenticate with their tokens. Is there a way to have the Wireless network group authenticate using AD and the other group use RSA? I can't find the switch or switches I need.
View 1 Replies
View Related
Mar 6, 2011
We have ASA5500's deployed for remote access concentration.We use Cisco IPsec vpn client with a group policy the chacks for Network ICE BlackIce ersonal firewall.The powers-that-be wish to change to McAfee presonal Firewall ok..Now the Group Policy allows you to check for several pre- configured Firewalls, Cisco Integrated, Sygate, Zone Labs etc.So as McAfee are no listed then I am to assume we go for "Custom Firewall" and this is where I am struggling.To configure checking for a Custom Firewall I must have the Vendor ID and the Product ID.McAfee haven't the faintest idea what we're talking about when we ask them for these details.Or is there a way to extract them from the registry of a machine with the McAfee product installed?
View 3 Replies
View Related
May 14, 2012
Basically I want to query Radius for AD group membership and apply a set of Bookmarks based on that group. I would use LDAP, but we have two domains and I need both to be available for login, so I am using ACS 5.3 as a proxy. I saw that using attribute 4242 for DAP for group membership, but what is the Group syntax?
View 1 Replies
View Related
Nov 20, 2012
I have configured ASA 5510 With IPsec Remote VPN.With local database users(Users are created in ASA).
Internal network has 4 VLANS. Need solution for below.
There are 25 Users created in ASA. where only 5 tp 6 users wants to grant access to Particualr IP and Subnets and rest of the users can access entire lan.
Is it possible to configure Group policy in ASA for IPsec Remote VPN.
View 1 Replies
View Related
Jan 9, 2012
We use a combination of Cisco ACS and Cisco catalyst 3560 switches for network authentication and authorization. Clients (Windows XP) have a certificate installed which will grand access to the network and put them in the correct VLAN. So far, so good. Some users are testing with Windows 7 in the same set-up as above and run into strange behaviour. The problem is that after a random timer the machine gets de-authenticated and nothing besides a reboot works to get the computer authenticated again (from a Windows point of view). It looks like this only happens to users who are using a certificate to authenticate, Windows 7 MAC bypass users have no such problems. If it occurs, the following logging appears in ACS: [code] We are using ACS 4.2(0) Build 124 and 3560-48PS switches with IOS 12.2(55).
View 4 Replies
View Related
Nov 13, 2011
What i want to do is simple. Being able for any member of Administrators group to authenticate on our ASA5510 based on the AD credentials.
What is correct CISCO procedure for that?
View 1 Replies
View Related
Nov 25, 2012
I had a problem about authentication use AD group member. Below webiside is the way I config on ACS.
[URL]
I'm using ACS 5.1.0.44 and this version has a bug , ACS cannot read AD group. I have to add it manually . After I change the access policy from Internal user to AD1. I can use anyone AD ID to pass authenticaiton. I finished all config from the website had same result.
I checked the access polices -- default device admin -- authorization , the new rules I created had no hit count. How can I make sure that I make a right config ?
View 2 Replies
View Related
May 16, 2013
I'm on an ASA 5510 running 8.2(5)41. I have clientless WebVPN configured to authenticate against an RSA RADIUS server, which has users assigned to RADIUS Class attribute 25 to match the group-lock values assigned to each ASA group-policy. This of course is to ensure users can only access the login page's drop-down VPN profiles they are assigned to by the RADIUS server. I have two other ASA 5510s (same code level) using the same RADIUS server with group-lock enabled but for IPSec remote access VPN's, and the group-lock feature works fine.
WebVPN, however, is authenticating any user to any VPN profile without regard to the RADIUS Class attribute 25 they are assigned. If I configure the VPN profiles to authenticate locally and assign group-lock to individual ASA user accounts, group-lock works. As soon as I point it back to the RADIUS server, group-lock does nothing. From the 'debug aaa' below for user 'corpvpnstp', you can see the RADIUS server sends back the attribute 25 values of "ou=stp.Client;" and "ou=stp.ClientDRC;" for this user. The ASA profile this user has attempted to connect to is "EMS-Admin", which should get denied by the ASA. Instead, the ASA successfully authenticates the user.
View 4 Replies
View Related
Apr 8, 2011
can i have on asa 5510 multiple pools and multiple group authentication for various departments along with restricted access if any
View 3 Replies
View Related
Jan 9, 2012
I'm trying to find out the options for authenticating remote users via IMEI and MISDN values via ACS 5.3/I'm unfamiliar with the Radius attribute options here and what kind of request/response we can utilise. Also previously I could define IP pools on ACS 4 but can't seem to do that now. Is there a way have ACS 5.3 to provide a DHCP server address for the connection ?
View 6 Replies
View Related
Apr 19, 2011
I've been working on trying to get RADUIS authentication working for devices connecting to our corporate mobile APN. Out APN provider sends us Username & Password attributes which I can authenticate fine using ACS 5.2 but I'm having a problem using other attributes sent in the Access-Request. We have mobile SIM cards with an MSISDN value match with a physical device with an IMEI value. The SIM cards cannot be used in other devices, only their matched device. The provider passes us the MSISDN attribute under RADIUS-IETF 31 and the IMEI under a VSA of 3GPP-IMEI
What is the best way of being able to authenticate a user and match the MSISDN and IMEI associated to that user?
View 1 Replies
View Related
Sep 11, 2011
I need some clarification with configuring my ASA 5540 with IOS 8.3x for remote client certificate authentication.
I have my root certificate from the Microsoft CA but not quite sure if the outlined steps in the Cisco websites below are exactly what I need since the firewall seems to be generating the certificate to be used. [URL].
My setup is such that the CA will issue certificates to the remote clients and to the ASA firewall, and the remote clients will authenticate and connect with their certificates which the firewall constantly updates using the CRL update from the CA. The dhcp pool is to be issued by the domain controller on the inside network and not on the firewall. Any examples or best practice steps to achieve this.
View 8 Replies
View Related
Aug 14, 2011
I want to configure IEEE 802.1x port-based authentication on cisco switches, preferable 2960 series. Which models support this feature?. I have try with some older switches but it doesn't works properly on everyone. I have upgraded them whitout better results, there is namely an issue with TLS handshaking on some switches which produces authentication to fail.
View 1 Replies
View Related
Dec 26, 2011
I am using Cisco 1812 as EZVPN server. I want to use Active directory for VPN user authentication. I am trying from couple of days but no success.With ASA, i am able to authenticate against AD, but not with IOS router. Below are my configurationsIf kerberos authentication is not possible, I would like to know the possibility of using AD as ACS external database. I am running both AD and ACS in the same server. If i can integrate AD with ACS, i can use TACACS or RADIUS for the authentication.
View 3 Replies
View Related
Mar 28, 2013
I've got random connection issue when I try to connect to a VPN gateway through an ASA 5510 (IPSEC client ->ASA 5510->VPN Gateway).
When the tunnel is coming up, those two lines appears in the captured traffic on the internal interface :
<private internal IP>.500 > <destination IP>.500: udp 541
<public external IP>.500 > <destination IP>.500: udp 541
When it's not coming up, the port nuimber for the public IP is not 500
(private internal IP).500 > (destination IP).500: udp 541
(public external IP).442 > (destination IP).500: udp 541
I don't understand why sometimes the port for the public external IP is 500 and sometimes not.
View 1 Replies
View Related
Feb 3, 2007
We have several ASA 5510 firewalls which are being used as VPN gateways.RSA SecurID is the authentication mechanism using native SDI connectivity. No ACS server is being used.Is it possible to assign user Group and other attributes (such as ACL), using the SecurID RADIUS server? I know this is what the Cisco ACS is for, but is it possible using the RSA RADIUS server itself?
View 11 Replies
View Related
Mar 2, 2011
I have a problem with LDAP authentication. i have an Cisco Asa5510 and windows 2008 R2 server. i create LDAP authentication.
aaa-server LDAPGROUP protocol ldapaaa-server LDAPGROUP (inside) host 10.0.1.30 server-port 389 ldap-base-dn dc=reseaux,dc=local ldap-naming-attribute sAMAccountName ldap-login-password ***** ldap-login-dn CN=user,OU=Utilisateurs,DC=reseau,DC=local server-type microsoft
but when i test, i have an error (user account work directly in server)
test aaa-server authentication LDAPGROUP host 10.0.1.30 username user password *****
INFO: Attempting Authentication test to IP address <10.0.1.30> (timeout: 12 seconds)ERROR: Authentication Rejected: Unspecified
View 11 Replies
View Related
Mar 21, 2013
I have a setup with a were I configured monitor mode on a switch with ISE as RADIUS server. This is for testing before a bigger deployment at a customer site.Im using ISE 1.1.3, C2960 and IOS 15.0(2) and a laptop with Windows 7 Enterprise SP1. The correct configuration with EAP-TLS and machin cert is working like it should but it is when I remove this and make the laptop fail that I get wierd results with monitor mode. I cant get DNS to work in dot1x monitor mode if the client fail authentication.
When the client fail dot1x and MAB it gets a IP with DHCP. I can ping but DNS/browsing is not working. If I put the AuthC back and the client authenticates DNS is working, or if I turn of dot1x on the client then DNS work as it should. [code]
View 3 Replies
View Related
Jan 13, 2012
I've setup my ASA 5510 to use AAA to my Windows Server 2008 NAP. After many hours of troubleshooting I got my setup to work. The only thing I'm not satsified with at the moment is, that RADIUS is using PAP for communicating between ASA5510 and W2K8/NAP.I've tried ticking the box "Microsoft CHAPv2 Capable" box under Users/AAA => AAA Server Groups => Edit AAA Server.From EventViewer on W2K8/NAP I get Event ID 6278 and 6272., see attached filehow I change from the PAP to the CHAP protocol?
PS: ASA 5510 running ASA version 8.2(4) and ASDM version 6.3(5)
View 4 Replies
View Related
May 1, 2012
how to associate an AD group - which i have defined in users and identity stores/external identity stores/Active Directory/Directory attributes to associate with the relevant identity groups - Users and identity stores/identity groups Is there an example of this being done somewhere as i am having problems understanding how to do this from the user guide.All i want to do is associate identity groups with ad groups.
View 3 Replies
View Related
Jun 28, 2012
I am attempting to configure Radius authentication accross a site-to-site VPN for my ASA 5510-01 for remote access.
ASA5510-1 currently has a live site to site to ASA5510-2.
ASA 5510-1 - 10.192.0.253
ASA 5510-2 - 172.16.102.1
DC - 172.16.102.10
ASA5510-01 can ping the DC and vica versa but is unable to authticate when i perform a test. ASA5510-01 can authenticate to a DC on it;s own LAN but not on the remote LAN that DC sits on.
I have double checked the 'Server Secret Key' and ports as well as various users which all work locallly. ASA5510-02 authenticates to DC with no problems.
View 3 Replies
View Related
May 18, 2011
I have a new Cisco Secure ACS 5.2 on a VM. We want to use it to for administrative access to our Cisco equipment with TACACS+. I am trying to map user permissions to different groups of devices based on active directory group membership, however it is not working.
I am using an LDAP (configured for secure authentication) external identity store. On the directory organization tab, I have confirmed the accuracy of the subject and group search base and the test configuration button shows that it's finding > 100 users and >100 groups.
On the directory groups page I have entered the groups according to the required format. cn=groupname1,ou=groups,dc=abc,dc=com
I have a rule based result selection under group mapping. I have two rules in the format below.
Conditon
LDAP:Externalgroups groupname1
Result
Identitygroup1
I have the default group set to a identity group named other. My problem is, no matter what user attempts to authenticate, the Default rule is applied, and the user is put into the other identity group.This occurs when I log on as a groupname1 user, groupname2 user, or as user that is not a member of either of those groups. LDAP authentication works and the user is able to logon to the device.
View 3 Replies
View Related
Jan 24, 2012
I'm currently looking for a solution in order to restrict the modification of the host internal identity store (add or delete MAC host) per group. The default administrator roles does not include "per group restriction". Under the ACS I defined one group per department? My objective it to allow each department to access their ACS MAC database to add or delete MAC addresses as required.
How to restrict internal identity store per group?Do I need to create new roles? and how?I was not able to get an answer from the ACS ADMIN manual.
View 1 Replies
View Related
Dec 5, 2011
I'm looking for Cisco ISE v1.1 to use the following licensing feature. url...Endpoint is dynamically profiled by Cisco ISE and assigned dynamically or statically to an endpoint identity group. Cisco ISE authorization rules do not use this endpoint identity group.
View 2 Replies
View Related
Jan 12, 2012
I'm looking into a way of routing users internet connection based on their username or group in a windows environment. Currently there's two ISP connections with their own proxy server. I want a user to be fully redirected to one of the ISPs based on who they are. I was hoping via IE proxy settings, this can be accomplished, but it looks like the primary ISP connection, is still getting most of the connections/routing.
View 1 Replies
View Related
Sep 19, 2010
I have been configuring anyconnect VPN. The requirement from customer is to configure MAC address based authentication for anyconnect clients. I have gone through various cisco documents. I couldnot find this option explained. Is MAC address based authentication possible in anyconnect vpn without having AAA server in place?There is an option to select end point attribute as MAC address, while creating Dynamic access policies. But at the host scan configuration of Cisco secure desktop, there are no options for performing MAC retrieval.
My ASA is running on version 8.2(1) and ASDM version 6.3(1) and a memory of 512 MB RAM. Any way for MAC based authentication in cisco anyconnect VPN.
View 3 Replies
View Related
