Protocols / Routing :: Compaq Mini CQ10-100 Netbook - Make Wireless Internet Connection Through D-link Router
May 29, 2011
I have a Compaq mini CQ10-100 Netbook, and I am trying to Make a Wireless internet connection through a D-link router. My ISP is Cox Cable. The Netbook is connected to my wireless network, but will not connect to the internet. It keeps asking me to transfer information, via thumb drive, from a wireless access point, but my router is my wireless connector and it doesn't have a USB port to plug in a thumb drive. How do I get this netbook hooked up to the internet?
View 1 Replies
ADVERTISEMENT
Jul 25, 2012
I'm checking a mini laptop for a friend and found out that the wireless does not work on it. First I tried checking the button to activate it and it didn't work, even if the indicador says it's off/on it doesn't have an effect on the network adapter. The PC is running Windows 7 32-bit. I downloaded the Ralink 2011 802.11 b/g/n WiFi Adapter driver and tried reinstalling it. Funny thing is that the installation went smoothly but in the driver details the name of the driver shows the default Windows one, 3.0.0.14 I beleive. Tried again to install the driver since I thought it was a bad download or something but the same results. I've tried with the Atheros driver but the installer said that since the card is not present no drivers would be installed, so I assume that the model is the Ralink. So far the network card appears disabled on the network adapter window, and if I try to enable it, it remains disabled.
View 1 Replies
View Related
Jan 25, 2012
i got a compaq mini cq10 400sa given to me by my friend for the mean time as my laptop has stopped working. it runs on windows 7. it is not detecting any wireless network whatsoever.
View 5 Replies
View Related
Apr 16, 2011
I have a Compag Netbook (running Windows XP Home Edition) which will not connect to the internet, however the wireless icon in the tray is telling me that the signal strength is good and that i am connected but i cannot access any webpage. I know it is probably not the modem as we have another netbook in the house which connects no problem, as does our laptop so i'm figuring its something to do with the Compaq netbook??
I've had a look at some of the other queries regarding this on the site and note that you recommend 'ipconfig /all' results so you can gain a better understanding of what the problem might be, so here it is below
Windows IP Configuration
Host Name: Compaq-38184c6a
Primary DNS Suffix:
Node Type: Unknown
[Code]....
View 7 Replies
View Related
Jan 19, 2011
I have purchased the above for my daughter but I am unable to connect to the internet have tried our t-mobile dongle and also main connection from virginnet broadband, neither seem to work this netbook runs on windows ?
View 2 Replies
View Related
Dec 1, 2011
I have a Motorola Surfboard cable modem with a Comcast account that is supposed to get "up to 15 mps". My desktop works gloriously, but my laptops and everything else hooked up to the net through my Media link Wireless N Router either run incredibly slow, or get kicked off completely.I've already had the router replaced one.
View 19 Replies
View Related
May 12, 2012
i have use 7' mini laptop, os windows ce , now i use tenda 3g 150 router
View 1 Replies
View Related
Jul 4, 2012
I have TP-LINK TL-WR740N router and I am trying to configure it to work with my Broadband cable over PPPOE.The router once configured show status as connected with a proper IP and DNS servers. When I use the routers inbuilt ping utility to ping Google or any other site I get a reply.But when I connect my computer to the router on the LAN port I see no internet on my computer. I am able to ping the router address but not google.I tried disabling all Firewalls and Antivirus I have but problem still the same.Also I tried connecting over WIFI but still no internet.I also called up TP-LINK helpline several time and got my router replaced. They also tried a few settings on my machine but no success.
View 1 Replies
View Related
May 13, 2012
I bought yesterday a wireless modem/router and Tp-Link Adsl2+ N300 Modem Router Td-W8960n.I have 2 laptop computers at home.The first issue I have is that with one of the laptops (quite old - Acer Aspire 2420-2579 with Windows Vista Basic Service Pack 1) I can not connect (wireless) to the internet. It says local access only. However in other countries (IM in NZ) it does connect to internet. It does work when I use an Ethernet cable between my router and the laptop. The second issue is with my other laptop. A HP Pavillion DV-4 windows vista home premium service pack 2. I manage to get wireless access to the internet but every couple of minutes the connections drops and starts again by itself�. After 1-2 min approx�. it is getting pretty annoying!I don�t think it is the routher as I also have an XBOX 360 connectet to the internet usign the same device and works absolutely fine!
View 6 Replies
View Related
Jan 19, 2012
I have an old Compaq and it does not have wireless capability. I want to transfer a software application and files to my new Acer Net book. How do i d this?
View 1 Replies
View Related
Feb 10, 2011
I bought 2 Sylvania netbooks for my kids. I was able to go wireless on my son's netbook since I found a small icon on the task manager, where I clicked and just followed the instructions. However, I can't find that icon on my daughters netbook, I've tried the control panel for internet connections but the "wireless" option is not there...
View 2 Replies
View Related
Oct 19, 2012
How can I make sure R11 is able to get the OSPF routes of all the areas. Make sure area-278 does not receive any ospf routes from other areas as well as from ASBR routes from other areas. At the same tim, area-278 should be able send successfully RIP routes that we receive from R2 to backbone area.
View 1 Replies
View Related
Jul 21, 2011
Cannot find my wireless internet connection on my Netbook using Windows XP
View 2 Replies
View Related
Apr 16, 2013
I have a computer named server and it ip is 192.168.0.5 and a live ip xxxxxxxx which is a private ip. on this system my oracle middle wear is running.I just want that people may access my application which is running on 'server' through public ip. Is it possible. If it is. then how.=]
View 1 Replies
View Related
Nov 18, 2012
My D-Link 802.11g/2.4GHz Wireless Broadband Router is not turning on. None of the lights turn on. I have checked all the cords, and they are all properly plugged it. My laptop can not wireless connect.Model # of D-Link Router: DI-524
View 1 Replies
View Related
Aug 11, 2011
I have a d-link dslg604t, i tried to do the frimware upgrade and it froze in the process. Now the internet doesn't work at all. I have uninstalled the drivers, reset the modem and it indicates the modem is working as in i have the two monitors and the blue flashing light between them shown, also all the network settings are there. DHCP is assigned automatically etc etc. I can ping the modem but when i try to connect to the internet i get "detecting proxy server", "internet explorer cannot display the page". "FTP (passive)- Error 12007 connecting to ftp microsoft.com
View 1 Replies
View Related
Feb 23, 2011
my desktop is picking up wirelessinternet, i have 2 avalible ethernet ports on it, is their a way i can plug an ethernet from my computer to my xbox to play online, i dont want to have a cable come from the router.
View 1 Replies
View Related
Mar 20, 2011
We have Linkline ADSL that was set up by them with a Netopia 2241N-006 modem and a Cisco 33674 wired router. We got a Cisco E2000 wireless router to replace the wired one. It sets up perfectly, in that I can see and connect to the wireless router just fine, but it has no Internet connection. Also, when we plug the cord straight from the modem into the computer (as was suggested by someone) it has no Internet connection, so it seems we need the Netopia modem for it work.I have connected to Cisco live chat three different times to try and find out how to make this work, and each time after making me give them all the information they insisted the uninstalling/reinstalling Cisco connect and then going through set up again it would work. On the second and third chats I even gave them the reference numbers for the previous chats so theiy could see that is what was already done, to no avail. Apparently that is the only solution they know.Then I called Cisco support on the phone (twice). The first time they insisted I hang up and I repeat the same procedure from the chats, even though I explained I had now done it three times and gave them the chat reference numbers. They said if I would not do that. The second time I called they told me that was not something they supported - using their router with an adsl modem - even though their instructions do cover it.
using the two routers together since I cannot get the wireless one to work alone. I went and bought a crossover cable, hooked the two routers LAN port to LAN port, changed the router's IP address to just outside the main router's range and disabled DHCP. This did not change anything, so I tried the one other idea I found online which was to assign the router a static IP address in the same range that the rest of the network is using, hook the two routers LAN port to LAN port with the crossover cable, and disable the DHCP. This did not work either.
View 8 Replies
View Related
Apr 25, 2012
i need to know that how can i make vlans in Linksys SRW224G4 Layer 2 manageable switch , because i have 100 users network having lots of users using more then 1 ip to connect 4 different servers having different ip class pools, what i need is, i want to use only single ip pool with Class B Address like 172.16.6.0 for all network users which all connect to far end servers through layer 2 Linksys SRW224G4 manageable switch controlling to allow different IP pools ? like 172.16.1.0 / 172.16.55.0 / 172.16.99.0 and 192.168.1.0
View 1 Replies
View Related
Apr 2, 2012
i have tryed starting it on the services but that willl not do it eitheir. i have tryed almost everything and it stilll does not work. i can not access internet. plus i think a virus messed up my internet protocols. i think i removed the virus though i have been looking for an answer for 7 hours now
View 1 Replies
View Related
Jun 11, 2011
How i can change my ip address without changing my internet connection??
View 3 Replies
View Related
Mar 15, 2012
The wireless network never picks up any signals and when I try to plug in to the modem it doesn't recognize the internet either. Is this a driver issue or what?
View 1 Replies
View Related
Mar 18, 2011
I have an Inspiron Mini 1018 which all of a sudden I cannot get internet access but I do have the wireless network as being connected. It was working fine but all of a sudden I can't get onto the internet. Have run diagnostics but it doesn't pick up any problems.
View 5 Replies
View Related
Jan 12, 2012
I'm looking into a way of routing users internet connection based on their username or group in a windows environment. Currently there's two ISP connections with their own proxy server. I want a user to be fully redirected to one of the ISPs based on who they are. I was hoping via IE proxy settings, this can be accomplished, but it looks like the primary ISP connection, is still getting most of the connections/routing.
View 1 Replies
View Related
Mar 8, 2011
We lost internet connection and found out that our router's light is off. Is it possible that something is wrong with the adaptor?
View 1 Replies
View Related
Sep 25, 2012
unable to open 192.168.1.1 in google chrome but can access other net work.
View 1 Replies
View Related
Sep 6, 2011
I have a netbook (ASPIRE ONE) with windows XP SP3. When I am at the office the internet connection fails frequently. The internet connection icon disappears after few seconds. But the rest of the computers that are in the office work OK with the internet. But at home, my computer work well, even the internet icon appears and remains. At office, there is a belkin300N router. At home, I have the same model but old version.there are computers with Windows Vista or Windows XP either at office or at home.
View 2 Replies
View Related
Jan 17, 2012
I have D-Link Amplifi N+600 Dual Band wireless router (Model: DIR-827) that was purchased a couple of months ago. I live in a house with a bunch of other university students so I would estimate we have about 18 devices that connect to the router such as laptops, mobile phones, and gaming systems. Every few hours our wireless router will just stop working and drop everyone's connection including the connection to the wired Ethernet ports. The light which is normally green on the front of the router turns yellow and will stay that way until the router is reset. The network still shows up on all the devices with full signal bars but no access.
View 1 Replies
View Related
May 26, 2012
I have my D-link DIR 600 and I never had problems with it until now. For the past three weeks, my router keeps on disconnecting my Desktop P.C. from which the main internet cable is connected. Whenever it happens, I try connecting my Netbook over a WiFi connection using the same router; and even though my desktop can not connect to the internet, my netbook still can. Apparently when it happens, the [3] (the 4th light in the image) light goes off, and I have to restart my Desktop P.C. for it to turn on again and to use the internet again.
View 1 Replies
View Related
Jan 25, 2012
I have IIS running in a machine inside my network and I would like to make is visible to the world wide web.To do that, I created a website in the port 8787, which is accessible when the user types 192.168.0.126:8787 in the browser. Of course it works only when the user is inside my network.(IIS running over windows server 2008 OS)Now I want to make it visible to the WWW, so I created a rule to make a port forwarding to it:I went to: Advanced > Virtual Servers and created a rule with the given information:
enabled
Name: website
private ip: 192.168.0.126
protocol: both
private port: 8787
public port: 8787
Schedule: always
This rule created automatically a firewall rule
Enabled
Alow
Source: WAN *
Destination: LAN 192.168.0.126 Protocol: * Port range:8787
always
Unfortunately it isn't enough, if I type myPublicIp:8787 I can't access the website because I either get "connection reset" error or a timeout.I pluged my computer directly in my modem and it worked perfectly.To make a test, I tried to enable the router remote administration on the port 10001. It didn't work.ps: my wireless router is a dlink di-524, I am writing this in this forum because I couldn't find the one related to my router...
View 1 Replies
View Related
Jun 15, 2011
I recently bought a tenda w548d Version 2.0 Adsl2+ Modem router. it worked fine with its default settings and wired connection was ok when i chose DSL uplink while installing its driver from CD. But it couldn't connect wireless. There were strong signals but connected computer couldn't get access to the internet. so i tried using ethernet uplink instead of DSL uplink while reinstalling the software Since then the light of ADSL never lights, even it never blinks. now the software on the cd can connect to the router. i cannot access its settings using IP address in browser, the page wouldn't load. I am so worried. Can i revert the setting back to dsl uplink?I can connect to the internet very smoothly using my old router so you can't blame my phone line or lan wire. I have tried reset the new router many times but still the ADSL light never lights up. And the ADSL light is ok because when i turn the router on, it lights with all the others.
View 2 Replies
View Related
May 23, 2011
We have gotten a tv with wireless capability.I do not remember the WEP key.I currently have my laptop pc and a HP printer working with my D Link router. I have gotten as far at the set up page for the router and am wondering if I change the WEP key, will it automatically update the existing devices (my laptop and printer) or will they be locked out? Can I use the same code for all 4 WEp keys ?
View 6 Replies
View Related
Mar 31, 2011
I have att dsl and they supplied me with a modem, a motorola model type 2210, and my belkin surf N300 router is giving me issues connecting to the internet. Im pretty sure my wireless network adapter is a netgear wg311v3.The issue im having is that sometimes i can connect to the internet just fine, and sometimes i cant connect to the internet. I know it is a router issue because when i plug the modem into my comp, i can access the internet 100% fine.I also think it is not a wireless network adapter issue because i ran an ethernet cable from the router to my comp and had the same issues. There are 2 other computers on the network, one of them is a year or two newer than my dell desktop, and has no issues whatsoever connecting to the internet via the router. The other computer on the network is a Wii, and has connection issues when playing online (probly a different issue), but can access the internet no problem.
View 1 Replies
View Related
