Protocols / Routing :: Change Ip Address Without Changing Internet Connection?
Jun 11, 2011How i can change my ip address without changing my internet connection??
View 3 Replies
ADVERTISEMENT
Protocols / Routing :: Internet Does Not Work After Changing IP Address
Jul 15, 2012well i had the same problem because i got bored and i was like hmm i wonder if i can change my IP and i tried it and i had the same problem but when i did system restore it still did not work, now i have to get a new operateing system...
View 10 Replies View RelatedProtocols / Routing :: Can You Change Your IP Address
Sep 17, 2011So I want to watch some videos on justin.tv, but for some reason I have been IP blocked. I actually went on their support forums and the guy basically said "I picked up a bad IP address", so I didn't do anything wrong, I just got unlucky.
View 3 Replies View RelatedProtocols / Routing :: Change Assigned External Ip Address?
Mar 30, 2011How can I change my external IP address which is assigned
View 1 Replies View RelatedProtocols / Routing :: Changing WAN IP On 3g / 4g Router?
Feb 6, 2013I need the capability to log into the 3g/4g modem and change the Wan IP address. Doe anyone know of a 3g/4g modem that allows you to do that. My other option would be to disable the wireless radio on the 3g/4g router and connect my Linksys Wireless router that I know I can log in and change the WAN Ip. It looks like to me that this model below would allow me to do that?MBR1516 Will turning off wireless radio on the 3g/4g router completely turn off all routing or could there be a conflict with my Linksys wireless router?
View 6 Replies View RelatedProtocols / Routing :: Can't Get Access To Router After Changing DSl Up-link To Ethernet
Jun 15, 2011I recently bought a tenda w548d Version 2.0 Adsl2+ Modem router. it worked fine with its default settings and wired connection was ok when i chose DSL uplink while installing its driver from CD. But it couldn't connect wireless. There were strong signals but connected computer couldn't get access to the internet. so i tried using ethernet uplink instead of DSL uplink while reinstalling the software Since then the light of ADSL never lights, even it never blinks. now the software on the cd can connect to the router. i cannot access its settings using IP address in browser, the page wouldn't load. I am so worried. Can i revert the setting back to dsl uplink?I can connect to the internet very smoothly using my old router so you can't blame my phone line or lan wire. I have tried reset the new router many times but still the ADSL light never lights up. And the ADSL light is ok because when i turn the router on, it lights with all the others.
View 2 Replies View RelatedProtocols / Routing :: Canyon Wireless N Router CNP-WF514N1A Not Working After Changing Password?
Feb 19, 2012I have a CANYON Wireless N Router CNP-WF514N1A. It was working properly, but I changed its deafult password to my own . (192.168.0.1 -> wireless security -> new pass -> okay -> reboot computer ). After I restarted the computer, the router stopped working. The lights on it are fine, and if I plug the net cable into the computer I have internet too. The problem is, if I plug the cable into the router, I don't have internet. And I can't open 192.168.0.1 either.
View 1 Replies View RelatedProtocols / Routing :: Sending Internet Connection Out Of Computer?
Feb 23, 2011my desktop is picking up wirelessinternet, i have 2 avalible ethernet ports on it, is their a way i can plug an ethernet from my computer to my xbox to play online, i dont want to have a cable come from the router.
View 1 Replies View RelatedProtocols / Routing :: Cisco E2000 Has No Internet Connection
Mar 20, 2011We have Linkline ADSL that was set up by them with a Netopia 2241N-006 modem and a Cisco 33674 wired router. We got a Cisco E2000 wireless router to replace the wired one. It sets up perfectly, in that I can see and connect to the wireless router just fine, but it has no Internet connection. Also, when we plug the cord straight from the modem into the computer (as was suggested by someone) it has no Internet connection, so it seems we need the Netopia modem for it work.I have connected to Cisco live chat three different times to try and find out how to make this work, and each time after making me give them all the information they insisted the uninstalling/reinstalling Cisco connect and then going through set up again it would work. On the second and third chats I even gave them the reference numbers for the previous chats so theiy could see that is what was already done, to no avail. Apparently that is the only solution they know.Then I called Cisco support on the phone (twice). The first time they insisted I hang up and I repeat the same procedure from the chats, even though I explained I had now done it three times and gave them the chat reference numbers. They said if I would not do that. The second time I called they told me that was not something they supported - using their router with an adsl modem - even though their instructions do cover it.
using the two routers together since I cannot get the wireless one to work alone. I went and bought a crossover cable, hooked the two routers LAN port to LAN port, changed the router's IP address to just outside the main router's range and disabled DHCP. This did not change anything, so I tried the one other idea I found online which was to assign the router a static IP address in the same range that the rest of the network is using, hook the two routers LAN port to LAN port with the crossover cable, and disable the DHCP. This did not work either.
Protocols / Routing :: Cannot Start The (ics) Internet Connection Sharing Service?
Apr 2, 2012i have tryed starting it on the services but that willl not do it eitheir. i have tryed almost everything and it stilll does not work. i can not access internet. plus i think a virus messed up my internet protocols. i think i removed the virus though i have been looking for an answer for 7 hours now
View 1 Replies View RelatedProtocols / Routing :: How To Change My Ip
Apr 12, 2011How can i actually change my ip...tryed those cmd things but nothing works. Ineed to change ip somehow.
View 1 Replies View RelatedProtocols / Routing :: Change MTU On Public Network?
Aug 24, 2011I'm trying to connect an Xbox 360 to my University's wireless network using a bridged connection between the wireless adapter and the LAN adapter. I can connect to the internet on the Xbox, but not Xbox LIVE. I get an error message stating that my MTU setting must be 1364 or higher. I obviously cannot access the router settings because they are the schools routers and I do not have administrative privileges. So, Is there some other way to modify MTU settings without that access?
View 1 Replies View RelatedProtocols / Routing :: Users Internet Connection Based On Their Username Or Group In A Windows Environment?
Jan 12, 2012I'm looking into a way of routing users internet connection based on their username or group in a windows environment. Currently there's two ISP connections with their own proxy server. I want a user to be fully redirected to one of the ISPs based on who they are. I was hoping via IE proxy settings, this can be accomplished, but it looks like the primary ISP connection, is still getting most of the connections/routing.
View 1 Replies View RelatedProtocols / Routing :: How To Change IP To Specific State And City
Jan 19, 2011I wanted to change ip address to certain region and more specifically a city. How would I go about doing this?
View 5 Replies View RelatedProtocols / Routing :: Compaq Mini CQ10-100 Netbook - Make Wireless Internet Connection Through D-link Router
May 29, 2011I have a Compaq mini CQ10-100 Netbook, and I am trying to Make a Wireless internet connection through a D-link router. My ISP is Cox Cable. The Netbook is connected to my wireless network, but will not connect to the internet. It keeps asking me to transfer information, via thumb drive, from a wireless access point, but my router is my wireless connector and it doesn't have a USB port to plug in a thumb drive. How do I get this netbook hooked up to the internet?
View 1 Replies View RelatedCisco Switching/Routing :: Can't Reconnect To 881 After Changing IP Address
Jan 1, 2013I have a new 881 router and am simply trying to change the ip address from the default 10.10.10.1 to 192.168.15.1
I tried doing this both in the CCP Express app loaded on the router, and also using the desktop CCP client. I can change other parameters without any problems, but when I change the ip address of the vlan the program hangs (as expected since the ip address should be changing). I then try to open it back up and reconnect but get no response from the router.
I can ping it no problem, and the http server is running according to the serial terminal.
Wireless Home Network With Verizon Internet Security - Changing IP Address?
Dec 24, 2011I have verizon fios internet and a wireless home network with verizon internet security and I want to ghange my IP adress on my laptop
View 6 Replies View RelatedProtocols / Routing :: Not Acquiring Ip Address
Jun 9, 2011I have a dell laptop. It will pick up and connect to the neighbors wifi. But when trying to connect to mine it will not acquire a network address. It continuously searches but says 0.0.0... it says the signal is excellent but will just not acquire the ip address. By the way, cell phones with Wifi connect to this network with no problems.
View 2 Replies View RelatedProtocols / Routing :: Keeping Log Of Own IP Address?
Feb 16, 2012Keep a log of my own (Wan) IP-adress. It should look up my own IP-address and write it away to a log, so that I can look up a few weeks or months later what my IP-adress was on a certain day. I am using a router at home.
View 6 Replies View RelatedProtocols / Routing :: IP Address For AT&T Router 2701HG-B?
Sep 18, 2011Have tried 192.168.0.1 and 192.168.1.1 and both time out.I need to connect two laptops to the wireless and need the pass code.
View 1 Replies View RelatedProtocols / Routing :: Can't Find Unit Ip Address?
Mar 21, 2011I'm working on a CCTV DVR which has network viewing function. The front controls on the DVR won't work at all so i am unable to access any menus or burn off the footage i need. I was hoping to connect to the unit via the network viewer software or web browser but i have no idea what the ip address is. Is there any way of finding out the ip address of the unit if i connect a pc to it via a cross over cable or through a switch or am i stuck because i dont know the ip range it is in?
View 6 Replies View RelatedProtocols / Routing :: How To Calculate Broadcast Address
Apr 27, 2012How can know the Broadcast address before subnetting? I know how to calculate the broadcast address , but don't understand 'Broadcast address before subnetting'?
View 2 Replies View RelatedProtocols / Routing :: Any Way To Get IP Assigned To Physical Address?
Apr 12, 2012Is there any way to get an ip address through it's physical location? I was asked this by a friend and it's a good question. We know how to get the physical address by it's by coordinates, but is it possible to reverse it, getting the ip assigned to the physical address?
View 3 Replies View RelatedProtocols / Routing :: Cisco 1841 - Cannot Use Public IP Address
Jun 5, 2012Am having an issue with my cisco 1841. I recently brought some IP Publics. Now that i need them i just can't use them, I don't know much about routers but till now have successfully manage to do some stuffs with the router after googling ,OK we already have some other ip publics and when i look at the config file i can see something like this:
View 3 Replies View RelatedProtocols / Routing :: Switch Shows Up Router With IP Address
Nov 21, 2012i got a d-link router comming off modum and then a lynksys switch . well when i run the lorex program it (the switch) shows up as a router with a ip address ? i have tried a different swith but still the same thing happens .
View 3 Replies View RelatedProtocols / Routing :: SR 5500 - Finding IP Address Of A Device?
Nov 15, 2011Okay so currently in my possession is a SR 5500 wireless channel receiver with a problem.. We need to find its current ip address it also is not a standard ip address such as 192.168.xxx.xxx it has a standard ethernet port and of course GPIB ports
I'm looking to know if there is a way I can find its ip address by maybe with a crossover cable, or by bridging its connection to my computer and somehow seeing what ip it's requesting.
Protocols / Routing :: Determine Country From Email Address?
Nov 8, 2012I have a list of email addresses, people who have subscribed to a free electronic newsletter. The email address is all the information we have about each subscriber.A satellite office is going to begin handling print and electronic subscriptions for subscribers in Peru. Is there any way to determine which of these email addresses are from Peru?
View 5 Replies View RelatedPoor Connection Until Change MAC Address
Nov 29, 2011I have been having considerably slow internet compared to the other guys I live with and decided to investigate. I have run the speedtest.net on a good chunk of their computer and they all get around 40 mb/s while I am getting 2 mb/s. I have figured out that when I go in and change my MAC Address, I am able to get the same speed that they do for a short amount of time, but after a while(I haven't figured out a time interval) my speeds go back to the 2 mb/s. I can then go back in and change the address again and the same thing happens. I thought I might have a virus, but the different scan that I have tried running show nothing and when I do netstat from the command prompt, nothing abnormal shows up.
View 3 Replies View RelatedProtocols / Routing :: Wireless Network Doesn't Have An Valid IP Address?
Apr 5, 2013giving unauthorized access and no internet access
Windows IP Configuration
Host Name . . . . . . . . . . . . : KHANBALOCH-PC
Primary Dns Suffix . . . . . . . :
[Code].....
No Access To Internet After Changing To A Dial Up Connection?
Jul 30, 2012Our ISP provider made our internet connection a dial up. Last time it automatically connects to internet without putting those username and password. So after they changed it only our server pc have internet. Others don't have. The technician from the isp provider keep telling that the switch(but he keeps telling us its a router dunno why) need to be configure but switches dont need to be configure right?
View 3 Replies View RelatedHow To Change Routing Address 192.168.1.1 To 192.168.0.1
Jun 21, 2012How to change my routing address 192.168.1.1 to 192.168.0.1?
View 1 Replies View RelatedProtocols / Routing :: Partition Departmental IP Network Address Block To Create Staff / Student Subnet?
Sep 28, 2011partition the departmental IP network address block to create a staff and a student subnet. Each of these will be identified by its own network address and netmask. It is university policy that you must be economical with the IP addresses. That is, the subnets must be as small as possible, but they must be large enough to accommodate the maximum number of hosts you were given. Also, it is university policy that the respective gateway router to the outside world should always be given the highest possible host IP address in the subnet. The student subnet should have a higher IP network address than the staff subnet. The network must be able to support up to 60 machines on the staff subnet (not counting the router) and up to 120 machines on the student subnet (also not counting the router).
IP address/netmask
University network address127.158.128.0
University network mask255.255.192.0
University internet gateway IP address127.158.191.254
Department network mask255.255.254.0
Department router address127.158.129.254
Suppose that the network address of the departmental network is 127.158.128.0 (calculated by AND between Dep network mask and Dep router address)I know that 60 machines would use 6 bits for the staff subnet.the netmask of staff would be 255.255.255.192.how can I figure out the the IP network address of the staff subnet.I have worked out the range for the staff subnetwork.
127.158.128.0 - 127.158.128.63
127.158.128.1 = Gateway address
127.158.128.63 = Broadcast address
Now how can I calculate the IP network address of the staff subnet?
HP Pavilion P6130y PC Not Recognizing Internet Connection After Changing Graphics Card
Aug 27, 2012I recently changed my graphics card (geforce 9100 to radeon hd 7750) because i wanted to enjoy some simple gaming and my previous graphics card (geforce 9100) wasnt capable of doing so. (This is my pc : HP Pavilion p6100 Desktop PC series*-* HP Pavilion p6130y Desktop PC Product Specifications - c01748306 - HP Business Support Center ). Before changing the card i uninstalled all nvidia related drivers (both in control panel and device manager) because i heard thats what youre supposed to do.
I successfully changed my graphics card (i think...) i can run all the games that i couldnt run before but.. I am having trouble connecting to the internet after changing the card. it seems like my computer isnt recognizing the inernet network. i know the network is fine because im writing this w/ my itouch which is connected to the network wifi. When i right click the red X icon w/ two computers and click "connect to a network" , it says "windows cannot find any networks" and i have no network options to choose from. Is it because i uninstalled drivers related to the network connection..?