Protocols / Routing :: SR 5500 - Finding IP Address Of A Device?
Nov 15, 2011
Okay so currently in my possession is a SR 5500 wireless channel receiver with a problem.. We need to find its current ip address it also is not a standard ip address such as 192.168.xxx.xxx it has a standard ethernet port and of course GPIB ports
I'm looking to know if there is a way I can find its ip address by maybe with a crossover cable, or by bridging its connection to my computer and somehow seeing what ip it's requesting.
View 1 Replies
ADVERTISEMENT
Mar 3, 2012
I need to find the headers of different protocols like ETH_IP, ETH_IPv6_IP, ETH_MPLS_IP, ETH_VLAN_IP , ETH_MPLS_ETH_IP , ETH_MPLS_MPLS_IP, PPPC_IP_TCPnUDP and many more.
I dnt know how to find. some one told me about wireshark , i installed that software and started capturing the packets but didnt find any of above except ip.
View 3 Replies
View Related
Apr 12, 2012
I had a custom device/computer on my network that was hacked from hong kong. It's one of those things where I seriously think the chinese have built a back door into it when they built it or something because everything was secured and monitored.The device runs it own OS or something like that I guess you could say. It can also run it in standalone mode broadcasting it's own signal. Once I figure this out I may not put it online anymore but thats besides the point right now. When it was hacked I'm pretty sure the port it uses to connect was changed from 80 to 591. When it runs in standalone mode I can connect to it but I am unable to actually access it's proprietary graphic network interface. It sends out UDP every few seconds or so and basically I was trying to search for some type of udp broadcast monitor and have tried using network tools such as netstat, port scanning, multicast, etc on all of the big three OS's because sometimes it seemed to finnicky what it wants to connect to. I've tried to let it connect back to my router again which it seems to do, but is then denied access and I think it may even have a trojan or somethng so I don't want it to that but if I have to to access it again I will.In standalone mode I've it usually trys to connect on 192...5 or 192...7 and I've tried to get through 591, 23, 80 etc. multiple times with no luck.
View 11 Replies
View Related
Jun 9, 2011
I have a dell laptop. It will pick up and connect to the neighbors wifi. But when trying to connect to mine it will not acquire a network address. It continuously searches but says 0.0.0... it says the signal is excellent but will just not acquire the ip address. By the way, cell phones with Wifi connect to this network with no problems.
View 2 Replies
View Related
Sep 17, 2011
So I want to watch some videos on justin.tv, but for some reason I have been IP blocked. I actually went on their support forums and the guy basically said "I picked up a bad IP address", so I didn't do anything wrong, I just got unlucky.
View 3 Replies
View Related
Feb 16, 2012
Keep a log of my own (Wan) IP-adress. It should look up my own IP-address and write it away to a log, so that I can look up a few weeks or months later what my IP-adress was on a certain day. I am using a router at home.
View 6 Replies
View Related
Sep 18, 2011
Have tried 192.168.0.1 and 192.168.1.1 and both time out.I need to connect two laptops to the wireless and need the pass code.
View 1 Replies
View Related
Mar 21, 2011
I'm working on a CCTV DVR which has network viewing function. The front controls on the DVR won't work at all so i am unable to access any menus or burn off the footage i need. I was hoping to connect to the unit via the network viewer software or web browser but i have no idea what the ip address is. Is there any way of finding out the ip address of the unit if i connect a pc to it via a cross over cable or through a switch or am i stuck because i dont know the ip range it is in?
View 6 Replies
View Related
Apr 27, 2012
How can know the Broadcast address before subnetting? I know how to calculate the broadcast address , but don't understand 'Broadcast address before subnetting'?
View 2 Replies
View Related
Apr 12, 2012
Is there any way to get an ip address through it's physical location? I was asked this by a friend and it's a good question. We know how to get the physical address by it's by coordinates, but is it possible to reverse it, getting the ip assigned to the physical address?
View 3 Replies
View Related
Jun 5, 2012
Am having an issue with my cisco 1841. I recently brought some IP Publics. Now that i need them i just can't use them, I don't know much about routers but till now have successfully manage to do some stuffs with the router after googling ,OK we already have some other ip publics and when i look at the config file i can see something like this:
View 3 Replies
View Related
Mar 30, 2011
How can I change my external IP address which is assigned
View 1 Replies
View Related
Nov 21, 2012
i got a d-link router comming off modum and then a lynksys switch . well when i run the lorex program it (the switch) shows up as a router with a ip address ? i have tried a different swith but still the same thing happens .
View 3 Replies
View Related
Jul 15, 2012
well i had the same problem because i got bored and i was like hmm i wonder if i can change my IP and i tried it and i had the same problem but when i did system restore it still did not work, now i have to get a new operateing system...
View 10 Replies
View Related
Nov 8, 2012
I have a list of email addresses, people who have subscribed to a free electronic newsletter. The email address is all the information we have about each subscriber.A satellite office is going to begin handling print and electronic subscriptions for subscribers in Peru. Is there any way to determine which of these email addresses are from Peru?
View 5 Replies
View Related
Apr 5, 2013
giving unauthorized access and no internet access
Windows IP Configuration
Host Name . . . . . . . . . . . . : KHANBALOCH-PC
Primary Dns Suffix . . . . . . . :
[Code].....
View 2 Replies
View Related
Jun 11, 2011
How i can change my ip address without changing my internet connection??
View 3 Replies
View Related
Jul 2, 2011
I've got a WAP610N access point and 4 WET610N to connect to it - however, no matter what I do when trying to install the WAP610N the setup tells me it cannot find the device.I've got the WAP610N connected to a homegateway (SAGEM) and my computer connected wired to the HGW. The HGW is setup as a DHCP server, everything beside the WAP610N works. It gets an IP address, and I can login to the web interface of the access point - but is still unable to use the setup and unable to connect any of the WET610N.
View 2 Replies
View Related
Sep 28, 2011
partition the departmental IP network address block to create a staff and a student subnet. Each of these will be identified by its own network address and netmask. It is university policy that you must be economical with the IP addresses. That is, the subnets must be as small as possible, but they must be large enough to accommodate the maximum number of hosts you were given. Also, it is university policy that the respective gateway router to the outside world should always be given the highest possible host IP address in the subnet. The student subnet should have a higher IP network address than the staff subnet. The network must be able to support up to 60 machines on the staff subnet (not counting the router) and up to 120 machines on the student subnet (also not counting the router).
IP address/netmask
University network address127.158.128.0
University network mask255.255.192.0
University internet gateway IP address127.158.191.254
Department network mask255.255.254.0
Department router address127.158.129.254
Suppose that the network address of the departmental network is 127.158.128.0 (calculated by AND between Dep network mask and Dep router address)I know that 60 machines would use 6 bits for the staff subnet.the netmask of staff would be 255.255.255.192.how can I figure out the the IP network address of the staff subnet.I have worked out the range for the staff subnetwork.
127.158.128.0 - 127.158.128.63
127.158.128.1 = Gateway address
127.158.128.63 = Broadcast address
Now how can I calculate the IP network address of the staff subnet?
View 5 Replies
View Related
Feb 16, 2013
I recently upgraded my Wi-Fi router to an EA3500 and am controlling it using Smart Wi-Fi running on a wired Windows 7 machine.So far, I have been able to add devices to the network without issue and each of those connections works fine. All, except my TV, have been Windows 7 based machines. Smart Wi-Fi Device List has been able to "see" each device and I have been able to add them to that list as well.
I am attempting to add a Windows 8 desktop computer to the network which is using a external USB wireless adapter. That computer can see and connect to the network through the EA3500 and the connection seems to work fine. The only issue is that its adapter does not show up in the Device List.
1) Does the Device List do anything else besides showing a list of devices I chosen to add to my network?
2) How do I get my Windows 8 wireless adapter to show up in the Device List?
View 6 Replies
View Related
Oct 1, 2011
I am doing a security course and I need to find out the IP addresses of the devices on my network in order to carry out a ping of death on one of my devices. I've done the ipconfig command but that doesn't give me the information I need.
View 5 Replies
View Related
Sep 7, 2011
I just installed a new France Telecom WIFI and it gets stuck trying to find IP address
View 3 Replies
View Related
Jul 28, 2011
Currently my Version 2. linksys wireeless router wouldn't reset it's IP and will NOT connect to the IP listed in my ipconfig,
I'm paranoid that it's something I've downloaded... even though that I'm always careful not to get anything off mistrustful websites! As soon as I download Kill Bill for my gf everything just goes straight to.... ! Would a file even be able to dis-able a router wireless capability? None. of my computers are infected but this is still seriously questionable.
I press this **bleep** button daily for 30 seconds and nothing is reset. My default gateway will not connect and the IP from webpages that show users their IP fail
I'm not sure if I should update the firmware because even if I could my ip.... doesn't persist
View 4 Replies
View Related
May 29, 2013
I am currently running WCS 7.0.230 I have controllers that are 2500 that are running 7.4.100.60?
My problem is that when I try to add my controller that is a Cisco 5500 running the same 7.4.100.60 I am getting the error SNMP operation to Device failed: Sparse table not supported. Verify that the WCS and WLC versions are compatible and try again.
I have double checked SNMP strings, IP Addressing and everything else I can think of. It just doesn't make sense that I can add a Controller with the same image but different hardware and no the other to the WCS server.
View 1 Replies
View Related
Jan 5, 2012
On the inside interface and network, we have a server at, (as an example) 192.168.87.1, which acts as an email server.
The outside ip address of the ASA is, say, 200.0.0.1.
The ASA directs any imap requests from the outside interface to 192.168.87.1, which works fine from the outside. Users simply open up email, and collect emails etc.
When they come inside the office, their machine of course attempts to contact the ip address 200.0.0.1. the ASA knows it is outside interface, so they are unable to collect emails.
that any internal IMAP requests from machines on the inside to 200.0.0.1 are directed to the machine inside on 192.168.87.1?
View 5 Replies
View Related
Mar 1, 2012
Is it possible on an ASA 5500 device to connect an IPSEC tunnel via hostname instead of the IP address? I have a site without a static IP address that is currently connected via Easy VPN but I want to change one of the sites to a regular IPSEC site to site as one side, the one with the dynamic IP, is being changed to SonicWALL. I will have DDNS setup on the site with the SonicWALL so I want to know if I can point the ASA device to the hostname instead of the IP.
View 4 Replies
View Related
Mar 21, 2013
We recently implement WLC 5500 Series, I found out guest user once period of that user expired it will not appear at lobbyadmin page where you can see list of users.
Is there any way to see expired guest users and also IP address which assign to guest user?
View 2 Replies
View Related
Aug 13, 2011
i am trying to configure static ip on remote client user side , i am using the following doc as an example but i am not getting the ip which i am mentiong in the user .[url]...
View 10 Replies
View Related
Mar 22, 2011
How do I confirm what is my router's IP address?
View 2 Replies
View Related
Oct 30, 2012
with our WLC 5500 controller, once the clients get the DHCP address the page is not redirecting them to the guest portal.What is the best way to check as to why the redirection is failing.
View 8 Replies
View Related
Jun 24, 2012
Is there any way to trace a device using Ip address?
View 2 Replies
View Related
Sep 3, 2011
I'm running a Winsock server on my machine, and I want to be able to connect a client (on an external/remote) network. I know that there are two IP addresses: The WAN IP which is what your IP address looks like while connecting to the internet. There is also an IP address assigned to you by your router. If both machines are on the same network, then I am able to make the client connect to the server by providing the Router-IP. But when they are on different networks, they do not connect even when i give the WAN IP. How exactly do I specify an address for a remote device ?
View 1 Replies
View Related
Jul 13, 2012
I'm in need of a device which can switch to several items which has the same mac address. I heard that there may be devices that can handle this, by for example mapping fake unique mac addresses in the switch to each on of the same mac addresses on the devices, so when you try to send something to a "device with the same mac address" you send it to the faked address in the switch and the switch just forwards it.
View 1 Replies
View Related
