Protocols / Routing :: Can't Find Unit Ip Address?
Mar 21, 2011
I'm working on a CCTV DVR which has network viewing function. The front controls on the DVR won't work at all so i am unable to access any menus or burn off the footage i need. I was hoping to connect to the unit via the network viewer software or web browser but i have no idea what the ip address is. Is there any way of finding out the ip address of the unit if i connect a pc to it via a cross over cable or through a switch or am i stuck because i dont know the ip range it is in?
View 6 Replies
ADVERTISEMENT
Jun 9, 2011
I have a dell laptop. It will pick up and connect to the neighbors wifi. But when trying to connect to mine it will not acquire a network address. It continuously searches but says 0.0.0... it says the signal is excellent but will just not acquire the ip address. By the way, cell phones with Wifi connect to this network with no problems.
View 2 Replies
View Related
Sep 17, 2011
So I want to watch some videos on justin.tv, but for some reason I have been IP blocked. I actually went on their support forums and the guy basically said "I picked up a bad IP address", so I didn't do anything wrong, I just got unlucky.
View 3 Replies
View Related
Feb 16, 2012
Keep a log of my own (Wan) IP-adress. It should look up my own IP-address and write it away to a log, so that I can look up a few weeks or months later what my IP-adress was on a certain day. I am using a router at home.
View 6 Replies
View Related
Sep 18, 2011
Have tried 192.168.0.1 and 192.168.1.1 and both time out.I need to connect two laptops to the wireless and need the pass code.
View 1 Replies
View Related
Apr 27, 2012
How can know the Broadcast address before subnetting? I know how to calculate the broadcast address , but don't understand 'Broadcast address before subnetting'?
View 2 Replies
View Related
Apr 12, 2012
Is there any way to get an ip address through it's physical location? I was asked this by a friend and it's a good question. We know how to get the physical address by it's by coordinates, but is it possible to reverse it, getting the ip assigned to the physical address?
View 3 Replies
View Related
Jan 25, 2013
I own a Nanostation5 Loco, and I have a router behind it.I would like to add a DHCP Lease to that router and do a port forward to the router.I can not find the DHCP Lease option in Nanostation settings, but if I choose to see DHCP Leases in "Extra info" on main page I can see some MAC and IP addresses there.When it comes to port forwarding, I fill the form slots with info, and when I press OK to save it a pop-up comes saying "Please fill out this field", a field for another forward rule.
View 3 Replies
View Related
Jun 5, 2012
Am having an issue with my cisco 1841. I recently brought some IP Publics. Now that i need them i just can't use them, I don't know much about routers but till now have successfully manage to do some stuffs with the router after googling ,OK we already have some other ip publics and when i look at the config file i can see something like this:
View 3 Replies
View Related
Mar 30, 2011
How can I change my external IP address which is assigned
View 1 Replies
View Related
Nov 21, 2012
i got a d-link router comming off modum and then a lynksys switch . well when i run the lorex program it (the switch) shows up as a router with a ip address ? i have tried a different swith but still the same thing happens .
View 3 Replies
View Related
Jul 15, 2012
well i had the same problem because i got bored and i was like hmm i wonder if i can change my IP and i tried it and i had the same problem but when i did system restore it still did not work, now i have to get a new operateing system...
View 10 Replies
View Related
Nov 15, 2011
Okay so currently in my possession is a SR 5500 wireless channel receiver with a problem.. We need to find its current ip address it also is not a standard ip address such as 192.168.xxx.xxx it has a standard ethernet port and of course GPIB ports
I'm looking to know if there is a way I can find its ip address by maybe with a crossover cable, or by bridging its connection to my computer and somehow seeing what ip it's requesting.
View 1 Replies
View Related
Nov 8, 2012
I have a list of email addresses, people who have subscribed to a free electronic newsletter. The email address is all the information we have about each subscriber.A satellite office is going to begin handling print and electronic subscriptions for subscribers in Peru. Is there any way to determine which of these email addresses are from Peru?
View 5 Replies
View Related
Apr 5, 2013
giving unauthorized access and no internet access
Windows IP Configuration
Host Name . . . . . . . . . . . . : KHANBALOCH-PC
Primary Dns Suffix . . . . . . . :
[Code].....
View 2 Replies
View Related
Jun 11, 2011
How i can change my ip address without changing my internet connection??
View 3 Replies
View Related
Sep 28, 2011
partition the departmental IP network address block to create a staff and a student subnet. Each of these will be identified by its own network address and netmask. It is university policy that you must be economical with the IP addresses. That is, the subnets must be as small as possible, but they must be large enough to accommodate the maximum number of hosts you were given. Also, it is university policy that the respective gateway router to the outside world should always be given the highest possible host IP address in the subnet. The student subnet should have a higher IP network address than the staff subnet. The network must be able to support up to 60 machines on the staff subnet (not counting the router) and up to 120 machines on the student subnet (also not counting the router).
IP address/netmask
University network address127.158.128.0
University network mask255.255.192.0
University internet gateway IP address127.158.191.254
Department network mask255.255.254.0
Department router address127.158.129.254
Suppose that the network address of the departmental network is 127.158.128.0 (calculated by AND between Dep network mask and Dep router address)I know that 60 machines would use 6 bits for the staff subnet.the netmask of staff would be 255.255.255.192.how can I figure out the the IP network address of the staff subnet.I have worked out the range for the staff subnetwork.
127.158.128.0 - 127.158.128.63
127.158.128.1 = Gateway address
127.158.128.63 = Broadcast address
Now how can I calculate the IP network address of the staff subnet?
View 5 Replies
View Related
Dec 2, 2012
I'm developing a project where I use the SNMP protocol to discover the network. By discovering the network I mean go through all the routers and switches and retrieve the IP routing table from routers and the forwarding table from switches. With the routers I have no problem. For the switches I need to know for each port the MAC addresses and the Vlans. Basically it's use SNMP to find a port number from a MAC address. To do that i followed this tutorial: [URL]
The problem is that I'm using a Cisco 3725 Router with IOS 12.4 (21) and a NM-16ESW module to work as a Switch and when I use the OID .1.3.6.1.2.1.17 corresponding to the BRIDGE-MIB as it follows:
snmpwalk -v2c -c myrouter 10.1.1.5 .1.3.6.1.2.1.17
it returns:
SNMPv2-SMI::mib-2.17.1.1.0 = Hex-STRING: 00 00 00 00 00 00
SNMPv2-SMI::mib-2.17.1.2.0 = INTEGER: 0
SNMPv2-SMI::mib-2.17.1.3.0 = INTEGER: 4
From this I guess there's no information on the router about Vlans or anything. Other thing is that when I use community string indexing it returns a timeout. My theory is that this version doesn't support indexing but I don't know.
how can I get the Port Number from a MAC address from this "switch" (it's a router working as a switch) using SNMP?
View 2 Replies
View Related
Mar 22, 2011
How do I confirm what is my router's IP address?
View 2 Replies
View Related
Nov 30, 2012
I need to replace a faulty fan unit on the catos WS-6509 switch. this Catos switch does not support show inventory so any other catos commands which will show me this part id?
View 2 Replies
View Related
Jul 29, 2012
If I setup 4948E's in HSRP configuration. And I connect devices to the Standby Unit that do not require redundancy. Will there be any issues passing traffic? I don't believe that standby unit blocks the traffic but wanted to confirm.
View 5 Replies
View Related
Jul 6, 2011
I can't connect to the internet on my laptop. When I tried to reconfig, it says I can't because media is disconnected.
View 1 Replies
View Related
May 12, 2012
find host by MAC Address
View 1 Replies
View Related
Nov 14, 2011
how can i find my friends ip address
View 1 Replies
View Related
Apr 18, 2011
I have been working nicely with an industrial scanner that runs on Linux, but the harddrive has become corrupted and I need to get it working again. The problem is that the main PCB has a realtek chip which I believe has the most basic webserver abilities that is used in the most basic way possible. To use it ARP commands were used to assign an IP address to the chips MAC address e.g. something like: arp -s 192.168.2.5 00-05-a4-00-a8-f8(the actual MAC address was lost along with the HD)So now I'm starting from scratch in XP, how do I find the MAC address in the first place?
View 4 Replies
View Related
Dec 20, 2012
I have a Zyxel storage box. How do I find it's IP address if I have it's MAC address? I am trying to connect to it but don't know the IP.
View 4 Replies
View Related
Jan 12, 2013
i need to find the ip address for my xbox
View 1 Replies
View Related
Feb 4, 2013
How would i find a "server address"? It is for an app i downloaded on my phone, the app is for my job...it allows me to view my schedule, punch in/out, request time off, etc..Our company (lowes) uses Kronos, which all of our scheduling, payroll, etc is all thriugh and they came out with app but you have to have "server address" We are on the Workforce Central 6.1 Version Suite.. I tried finding it while at work yesterday with no luck, I only found site address of which I couldnt even pull up here at home.
View 2 Replies
View Related
Jul 16, 2012
How to find ip address on my hp photosmart printer
View 1 Replies
View Related
Aug 20, 2011
why the WAN protocols like Frame-relay, HDLC and PPP are called Layer2 protocols?What is the address scheme they use?
View 5 Replies
View Related
Jan 21, 2011
In the run box I enter cmd and hit enter. It got me to the command promt and I typed in ipconfig/all and hit enter. It displayed Windows IP Configuation but nothing else except another C prompt. Windows XP version 5.1.2600 What next?
View 8 Replies
View Related
May 23, 2012
Do you have any suggest for network scanning software?Something who can find IP address and hosts in the network?
View 11 Replies
View Related
Jun 6, 2012
cant find server name for address...(server) : time out..15 nod is join to server(win2008R2) but new of nod is join for network error : computer name change....Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:WINDOWSdebugdcdiag.txt.An error occurred when DNS was queried for the service location (SRV) resource record used to locate a domain controller for domain puya.org.The error was: "No records found for given DNS query."(error code 0x0000251D DNS_INFO_NO_RECORDS)The query was for the SRV record for _ldap._tcp.dc._msdcs.puya.orgFor more information
View 1 Replies
View Related
