I have a network set up with file sharing. I use a Windows 7 PC to host files that are shared with around 8 other PCs - some on Windows 7, some on Windows XP. The file sharing works but sometimes some users are unable to get access to the files. The error message is something like PCNAME is not accessible...
View 2 RepliesI have a network set up with file sharing. I use a Windows 7 PC to host files that are shared with few other PCs - some on Windows 7, some on Windows XP. The file sharing works but sometimes some users are unable to get access to the files. It seems to be only on the machines that are on XP that this problem occurs. The error message is something like \PCNAME is not accessible...
The user can connect if the machine storing the files is restarted but it will happen 4-5 times during the day.
what is the ideal timeout for users when no activity is performed while connected to network via wireless
-WLC model 5500
-AP model 1200 series
users get disconnected every 15mins when machine is Ideal and where do i see this option.
Request timeout on network connection
View 4 Replies View RelatedI was able to connect to my 5ghz and 2.4ghz networks just fine. Now today I get a message that the connection timed out whenever I try and connect to the 5ghz. I have done a 30/30/30 reset, and still no joy. The one thing I haven't done yet is a 30/30/30 with a configuration from scratch. I will probably try that later. I've done the usual things like change the channel and all that, still no go. Other things I've done, change the network name, change the MTU, restart my machine. However, this is happening on other devices as well. The 2.4ghz network, solid as a rock.
View 1 Replies View RelatedI'm looking to setup a network with 30 users mostly using windows. Would you recommend me getting a router and then a switch to hoook up all those LAN connections ?
View 4 Replies View RelatedI'm looking into a way of routing users internet connection based on their username or group in a windows environment. Currently there's two ISP connections with their own proxy server. I want a user to be fully redirected to one of the ISPs based on who they are. I was hoping via IE proxy settings, this can be accomplished, but it looks like the primary ISP connection, is still getting most of the connections/routing.
View 1 Replies View Relatedmy current setup: Windows XP machines authenticating wireless using 802.1X to a Cisco ACS 5.3 that redirects the request to Microsoft Active Directory. All the statements that I make below are what I have gathered from reading on forums, some of them might be incorrect.
In the ACS Under “External Identity Stores” and “Active Directory”, there is a check box called “Enable Machine Access Restrictions” if it is checked and the Aging time is set to 8 hours and a Windows XP machine authenticates using it’s Domain credentials it will gain access to the network but if that computer is not rebooted after the 8 hours is up, Windows XP will not send it machine credentials again, it will only send the user/pass of the user and will loose access to the network. The problem we have is that most of the users do not shutdown their computers when they go home, they hibernate the computers thus when they come back to the school the 8 hours aging time on the ACS has expired. The ACS expects to see the Windows XP machine send it’s domain credentials again but from every forum I have read on, Windows XP will not send it again until it get rebooted (FYI, Windows 7 will send the proper info, thus they work just fine). In the mean time I have changed the aging time to 8760 hours but this should only be temporary because it is a security risk to have the aging time set so high. Moving forward what are my options to make this work properly?
-Is there a way to fix Windows XP?
-Is there a recommendation on how to bypass this issue but still give us decent security?
-Is setting the aging time so high, a non security issue?
-I guess worst case scenario, the customer can try to educate all the students and staff to reboot their machines every morning?
I have a new Win 7 Dell Precision Workstation that will not log in to my domain. I get an error that there is no login server available if I attempt to log in using a domain account. I log in as the local admin and then try to join a domain using the Join a Domain or Workgroup wizard. I then get an error stating "this operation returned because the timeout period expired". I have had to reset my core switch to get a couple of the new boxes (including this one) to even join the domain. I also show no internet in the Network and Sharing Center most of the time.
View 2 Replies View RelatedASA 8.2(5), uauth absolute timeout is disabled and inactivity timeout is set to 48 hours:
timeout xlate 48:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:00:00 absolute uauth 48:00:00 inactivity
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
Users still get kicked out every 8 hours and they have to reauth. This is a logging message:
%ASA-5-109012: Authen Session End: user 'john', sid 839, elapsed 28801 seconds
I got this error this operation returned because the timeout period expired error code 0x000005b4
View 1 Replies View RelatedI am able to access 930L (2 cams) from wifi be it laptop,iphone or ipad but I am not able to see it through 3g.I have Huawei fibre optics broadband reuter from Starhub.Starhub is running away if ask them to fix it. Huawei never takes the call.I tried atleast 3 times 10 minutes each at 8006011450.It goes to disconnect. The lot talked about UPNP is enable in reuter but it does not work.
Now i talked to Dlink support with ticket DCX36811.They advised to load the firmware.I did it still the connection timeout is there. we have baby to monitor through iphone/android 3g.
I'm trying to configure a timeout for network connection, but when it suppose to disconnect client, it's not working. Is it possible to do this??
Only works when the client is connecting and is denied if the time is not valid. But how could I do this if the client is already connected, enable re-authentication?
At the moment I am trying to connect to a DHCP ISP, but the connection only last for 10-15mins and then it will automatically disconnected. Every time I reset the WAN port , service back to normal for another 10-15 mins ><
[code]...
I'm using the D-link dir-300 wi-fi router. Cable internet connection. PC is connected to the router by the cable and the laptop via wi-fi. Both machines have the same problem - after some time, although there are no package loss when I'm pinging anything, some services report "connection timeout". Such as PvP.net, EA Online and Turbofilm.tv. Soft reset, hard reset didn't solve anything. Although when PC is connected straight to the main internet cable - there are no problems at all. [code]
View 7 Replies View RelatedI recently had a firewall that wasn't passing traffic (ASA 5510 running software version 9.1).It turned out it had 130000 active connections. Doing a "clear conn port 53" dropped the active connection count back to 38k, and the firewall started passing traffic again.
View 7 Replies View RelatedI configured multiple vlan on my Cisco ASA5520. Everything work perfectly except RDP (3389) connections. The connections are established but but after a period of inactivity, the user is disconnected from server (black screen). The same problem happens with other type of connections (client/server), exemple : Oracle, file sharing. Before installing the ASA, computers and servers were in the same vlan and it worked well.
There's a notion of inter vlan timeout connection ?
I am using DHCP ISP , but the connection only last for 20 mins exactly and then it will automatically disconnected. Every time I reset the WAN port ,
service back to normal for another 20 mins ><
The are no log or any error message when connection timeout. the status of the WAN port is normal "Up Up".
I have tried this config on another ISP and everything work just fine !
Fiber converter -------> Cisco 1812 (FastEthernet1) --------->LAN
Router#sh runBuilding configuration...
Current configuration : 3205 bytes!
version 12.4service tcp-keepalives-inservice tcp-keepalives-outservice timestamps
[Code].....
I've been running into an issue for the past week or so where my wireless adapter intermittently can't contact my router.When it occurs the network connection reads as having limited connectivity. I'm unable to send requests to load webpages, and videos and the like stop loading. Sometimes the network disconnects entirely. After this occurs, I can't connect again for a few minutes. My connection consistently reads as having 2-3 bars available. The issue tends to occur frequently, often every 15 minutes or so. Strangely enough, I have been able to play bf3 online for over 40 minutes without connection problems (I quit before any occurred - not sure if any would have). So far I've tried the windows troubleshooter, updating the driver to my wireless networking adapter, manually assigning my network address (tried 192.168.1.4, 192.168.1.5, etc), setting my 802.11b preamble to "Long only" and performing a system restore. I have rebooted my machine as well.
My technical specs are as follows:I'm running Windows 7 Ultimate N 64 bit edition with service pack 1. System has 8gb Ram, an i5-3570k processor and HD7850 graphics card. Motherboard is the Asrock Z77 extreme 4. My wireless network adapter is the TP-link TL-WN722N. The adapter was working fine for some time before this issue appeared.My router is an old U.S. Robotics Wireless MaxG Router. It seems to work fine with other computers in the household, although it does require fairly frequent power-cycling. Running ipconfig on the command prompt while the internet is working returns:
Quote:
Windows IP Configuration
Wireless LAN adapter Wireless Network Connection 2:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::293a:e9bb:ba5a:7536%14
IPv4 Address. . . . . . . . . . . : 192.168.2.5
[code]....
At the moment I am trying to connect to a DHCP ISP, but the connection only last for 10-15mins and then it will automatically disconnected. Every time I reset the WAN port , service back to normal for another 10-15 mins >< The are no log or any error message when connection timeout. the status of the WAN port is normal "Up Up"I have tried this config on another ISP and everything work just fine!!!
Fiber connector -------> Cisco 1812 (FastEthernet1) --------->LAN
Router#sh run
Building configuration...Current configuration : 3205 bytes
!
version 12.4
service tcp-keepalives-in
service tcp-keepalives-out
[code]....
I have ASA 5510 with 8.2.4 and 8.0.x OS and all seem to have common problem of idle TCP connections not timing out. The host to host connections are coming over VPN tunnels. I have default timeouts on all the firewalls. I have tried changing global timeouts and as well as host specific timeouts using MPF but doesn't work at all ! The problem is when TCP connections are sitting idle in conn table for days and when connection limit of 50,000 conns reach the firewall starts behaving unpredictably dropping packets or unresponsive! I need the unused idle connections to timeout which is NOT happening either by changing global values or MPF.
View 1 Replies View Relateddefault inactivity connection time out for A3(1.0) So by defult any tcp connection(http or https) will be timed out in an hour. [code]Was this change in the A4(2.0) code or is it still the same? I heard a TAC engg say that default inactivity timeout for http and https are now 5 mins that is 300 seconds.
View 3 Replies View RelatedOur client tried to a download a real time generated file from a website, the generation process around 5 mins, after 5 mins, the file will be started to download
When my client direct connect to internet, the file can be download successfully, but when pass through the ASA 5510 and using the internal IP address, a message something like "Are you sure want to logout from this web page?" appears in Safari after 5 mins, i think the time of the error message appear when a "you can start to download" message send from the server to client, the page session timeout so that make the user cannot download the file from internet as the session is not vaild.
I couldn't find any timeout setting in "show runn", is it possible the setting in ASDM? how can I find it and configure it?
Version: Cisco ASA 5510 8.4(4)1
I've installed cisco asa 5510.
When I "show local-host all detail connection "
Normal situation:
105 myfailover:10.255.255.2/0 NP Identity Ifc:10.255.255.1/0,
idle 0s, uptime 1D14h, timeout 2m0s, bytes 18196822
But I got this output ( timeout - )
[URL]
When a client connecting to a specific AP (example AP01), after every 1800 sec uptime it will reconnect and join other unit AP (example AP02)Both AP physically installed distance is around 6 meters from each other. I conduct the testing where i get myself sitting in middle between these two APs.
01. If i disable settsion timeout this feature, or setting the seconds become higher value, what's the performance and security impact? Is it recomend to change the default 1800 seconds session timeout?
02. Is there anyway i can tweak on WLC controller to prevent the client after session timeout then associate with another AP. This will lead major performance impact as the client woudl possibility connect to the weak signal AP and effect on the performance.
These are the details for reference:Client detail
- Dell DW1520 wireless-N WLAN card, with firmware version 5.100.235.12
- CCX version 4 supported
- Layer 2 security is WPA2 personal with PSK.
- wireless radio an
Controller detail:
model is AIR-CT5508-K9
software version is 7.2.110.0
My friend cant connect to the web using a wired connection, I thought I would have a look since I have another laptop with XP, I tried many ways to get a connection, now ive noticed in Device Manager under Network Adapters, on my OS XP I have 1394 Net Adapter, Intel(R) PRO/Wireless and Realtek RTL ( Family Fast Ethernet).But on his OS (XP) he only has 1394 Net Adapter and Intel(R) PRO/Wireless LAN 2100 3A Mini PCI Adapter.Should he also have a Ethernet Adapter as well or am I missing something?
View 5 Replies View RelatedI have 3 laptops running through a wireless lan. All laptops connect to the router, and 2 of them connect through to the internet. One of them will not connect to the internet. I have tried using an ethernet cable connection, and this did not work either. The more worrying thing for me (not being so computer literate) is that I could not even get a response when I pinged the modem when it was connected with a cable to the PC. The network sharing centre says that I have a default gateway access issue or that "wireless network connection" doesn't have a valid IP configuration, I have lost the ability to print with wifi and my Sonos system now no longer connects. I also get a media disconnected message when I do an ipconfig.
View 8 Replies View RelatedWe are running Cisco Secure ACS for Windows version 4.1(1)b23p5 on a Windows 2000 member server. Starting from today, ACS fails to authenticate users. Using the same external user (andrea-meconi) I can verify successfull and failed authentication. This is the AUTH.log for a genericRADIUS request...
AUTH 25/02/2013 15:30:24 I 0396 3900 External DB [NTAuthenDLL.dll]: Starting authentication for user [andrea-meconi]
AUTH 25/02/2013 15:30:24 I 0396 3900 External DB [NTAuthenDLL.dll]: Attempting
[Code].....
we are using ACS4.2 to authenticate wireless users for ssid : copr-wireless. the acs authenticate users via windows database (acs is a member of the windows doamin) no local user defined in acs. there is a mapping between all windows users and a local group in acs (wireless_group) in wireless group i defined the vlan as 80 so that corp-wireless clients will be in vlan 80 and they can take an ip address from one DHCP server in the network. vlan 80 is in our core switch. the dhcp also.
now we added a guest anchor WC with ssid: guest-wireless. we need to auth guests also via ACS/Windows. guests are the same users as corp-wireless but corp for lan only and guest for internet only my prob is that ACS will map guests to vlan 80 because they are member of the domain, however guest users should not have any vlan. it is like if they are in DMZ. they will take ip address from the anchor WC.
Want to change DNS Server Address on PC. But when I go to change DNS address by going to Network Connections in Control Panel. Select current Local Area Connection and choose Properties, I get an error 'An Unexpected Error Occured'. Have tried resetting network again but still the same error
View 2 Replies View RelatedI am working on a friends HP laptop that suddenly lost it's ability to see any networks at all. When I try to enable it in network and sharing it stays disabled. Just to be sure it wasn't hardware related I ran a ubuntu live cd and was able to connect with no problems. I tried updating the drivers,installing and reinstalling the network card with no luck. I also tried letting windows repair it but it says there may be driver problems.
Laptop-
HP G72 Notebook
Win 7 64bit
4 gig ram
We have a new Dell Inspiron15R with Windows 7 installed. Our internet provider requires a User ID and password and therefore requires a redirect to their website.
I get a Windows security message recommending I do not allow the redirect (which I can choose and force the redirect). My question is - Is there a setting I can modify to allow this redirect to eliminate the security warning? Our old laptop ran on XP and redirected without any security warning.
I've got a windows server 2003 running a big application (sage1000) but suddenly it seems that users cannot access the server by unc path.i've also test to access \server on the server itself doesen't work.
View 2 Replies View Related