what is the ideal timeout for users when no activity is performed while connected to network via wireless
-WLC model 5500
-AP model 1200 series
users get disconnected every 15mins when machine is Ideal and where do i see this option.
Users are facing issue since a long time now . Whenever user connected to wireless is idle say 10 -20 seconds he gets disconnected This happens for all the users and even Mac/Win 7 I changed Activity Timeout on AP and even rebooted but still when I do show dot11 associations all-client I see activity-timeout
Users don't get disconnected when there is continous flow of data its only when user is idle
When user disconnects and hit refersh it starts working again
I have a network set up with file sharing. I use a Windows 7 PC to host files that are shared with around 8 other PCs - some on Windows 7, some on Windows XP. The file sharing works but sometimes some users are unable to get access to the files. The error message is something like PCNAME is not accessible...
View 2 Replies View RelatedREmote desktop connection times out when there is no activity, I mean I open rdp to work computer from home ,If I am away from the computer I am not using keyboard , after few minutes I get a blank screen and if it is very longthe connection times out and I have to relogin to my computer, I need suggestion on how to retain the connection so that no blank screen appears and I alos dont loose connection .
View 1 Replies View RelatedI have a network set up with file sharing. I use a Windows 7 PC to host files that are shared with few other PCs - some on Windows 7, some on Windows XP. The file sharing works but sometimes some users are unable to get access to the files. It seems to be only on the machines that are on XP that this problem occurs. The error message is something like \PCNAME is not accessible...
The user can connect if the machine storing the files is restarted but it will happen 4-5 times during the day.
I am trying to connect to my son's wireless internet with my own laptop. I can't get it to connect - I have tried to "renew IP address" and it doesn't work. I also got a message when I went to Start Run, etc etc "no operation can be performed on Wireless network while is has its media disconnected" I am able to connect to my own wireless internet at home on same laptop.
View 1 Replies View RelatedI used the following commands to limit users on my wireless network (WLC 5500) and a Nexus 7000. The previous cisco doc only covers the 6500 and some commands have changed. Tested and working except the PIR gives an error, post up if you know why, otherwise enjoy!
Note Wireless Network assumed to be 172.21.0.0/16.Note This will limit each wireless user to 1 MbpsNote The PIR (Peak Infomation rate, also know as burst) is ignored in following commands, unknown at this time why.Create ACLs:
ip access-list acl-wireless-downstream 10 permit ip any 172.21.0.0/16 ip access-list acl-wireless-upstream 10 permit ip 172.21.0.0/16 any class-map type qos match-all class-wireless-upstream match access-group name acl-wireless-upstreamclass-map type qos match-all class-wireless-downstream match access-group name acl-wireless-downstreampolicy-map type qos police-wireless-upstream class class-wireless-upstream police cir 1 mbps bc 200 ms pir 1536 kbps be 200 ms conform transmit exceed drop violate droppolicy-map type qos police-wireless-downstream class class-wireless-downstream police cir 1 mbps bc 200 ms pir 1536 kbps be 200 ms conform transmit exceed drop violate drop
1.Apply police-wireless-upstream on the incoming port from the controller.
interface port-channel130 description *** LAG for WLC1 *** switchport mode trunk switchport trunk allowed vlan 80,130,255,600 service-policy type qos input police-wireless-upstream
2.Apply policy-wireless-downstream on the uplink LAN/WAN ports.
interface port-channel101 description *** L3 Port Channel to Core VDC *** no switchport service-policy type qos input police-wireless-downstream ip address 10.70.10.18/30 ip router eigrp 10
I have Users Connected via IPSec vpn using asa 5510 to my enterprise network,but i have seen that the user stay connected while he sleeping , now i need to tear down the tunnel if the inactivity is 15 mts,i mean if the user idle for 15 mts with any thing automatically disconnect him after 10 15 mts
View 5 Replies View Relatediam opening a cyber cafe next week.i have one computer (main server) which is connected to 5 monitors by an device named Ncomputing device and software.i have one cpu which is connected to others monitors.my question is how to see other 5 computer" s activity by my host pc?
PC SPECS:
intel i3 2120
h61 mobo
windows 7
I have a 2wire 2700hg-d (Qwest/Centurylink) router serving 3 or 4 computers. Is there a way I can either block or monitor porn viewing activity of users through the router?
View 2 Replies View RelatedWe are facing a bug with our ASA 5500 series (version 8.5.26) and the Internet explorer when the users connect to ssl vpn and they are not able to connect to the network resources like their PCs and the Cisco port forwarder keep asking for its installation
We already updated the ASA version installed in the user's computers the Microsoft kill bit patch.
We recently implement WLC 5500 Series, I found out guest user once period of that user expired it will not appear at lobbyadmin page where you can see list of users.
Is there any way to see expired guest users and also IP address which assign to guest user?
Is it possible for the wlc (5500) block wireless users attempting to login to the network more than 3 times?I have several devices trying to connect to the network automatically using rhe old password, after 3 attempts the account will lock out! Im running peap mschapv2 with radius and active directory.
View 1 Replies View RelatedWhen users are VPN connected their telnet sessions timeout after an hour of inactivity. Looking at the connections on the firewall they are showing as idle. Is there a configuration change or something else that has to be modified?
View 2 Replies View RelatedRecently i have setup a WLAN with inside and anchor 5508 controllers. Standard setup. However, one issue I have is I wish to extend the length of time between password changes for users connected in on the guest wlan. At the moment, 30 is max. I dont have an option on the controller to creat accounts for any longer than that. How to I extend it to 90 days or 120 days?
View 1 Replies View RelatedAs of last night my router has been producing slow connectivity when multiple users are connected to it, but it's perfectly fine when only one user is connected. I am on a laptop myself, but we also have a second laptop and a desktop where the modem and router are set up. I have upgraded the firmware so that is up to date. We have Comcast Fiber Optics so my internet speed is normally quite fast even when all of my computers are connected.
I am using DHCP Configuration. My Channel Width is set to 20 MHz and I am using Channel 11. The Security Mode is set to WPA Personal. I had it on WPA2 Personal but I read that changing to WPA Personal might work and so far it doesn't seem to have done anything. I set the Beacon Interval to 50, Fragmentation Threshold to 2304, and RTS Threshold to 2304. Everything else is set to the default factory configuration.
Just today I received a notice that said "Windows has detected an IP Address Conflict", but ever since I reinstalled the Firmware it hasn't come back. I've rebooted both my laptop and the desktop to confirm it hasn't come back as well. I've tried everything that I could think of including reconfiguring my router and restarting my modem as well.
I was examining my router's logs the other day and I noticed a recurring entry stating that my PC's IP address was sending packets to the IP 172.16.30.115 on port 80, and that the router was dropping them.Except for the fact that my home LAN uses the 192.168.1.0/24 network EXCLUSIVELY. That is all it has ever used since this router was set up, and the only other networks we have EVER used are 192.168.0.0/24 and 192.168.2.0/24. So why, I wondered, is my PC repeatedly sending (presumably) HTTP traffic to a private IP that is not and never has been on my network?I wasn't worried about what these connections might be doing, since I figured they couldn't do anything, but I was kind of concerned about what was generating this traffic in the first place. So I downloaded Wireshark and ran a capture for 30 minutes. Upon completion, I filtered results to show only packets that contained the IP 172.16.30.115, as either the source or destination IP.Based on the router logs, I expected to see three packets with my PC's source IP address and a random source port sent to 172.16.30.115, port 80 every 10 minutes.And I did see that. These are TCP packets, and they appear to be completely empty. The only thing I noticed about them is that the SYN flag is set. I don't know what the significance of that is, if any, but that's what I noticed.
What I DIDN'T expect to see were the packets that had a source IP of 172.16.30.115. These packets (also TCP) had the ACK and RST flags set, and they contained the text "Go away, we're not home." So not only are there packets being sent to an IP that cannot possibly exist within my network, but there are also packets coming FROM the impossible IP telling me to go away.All of that is scary enough on its own. But then I hopped on Google and did a search for the phrase "go away, we're not home," and almost every result was related to the decline of the Storm worm. After reading about Storm, I was more confused, not less. In its heyday, Storm used UDP traffic to communicate between peers, and my mystery traffic was TCP. Storm usually did not use well-known port numbers, such as 80, which I read was part of what made it so resilient. Not to mention that the most recent posts I could find regarding the Storm worm were dated 2010 and were about the possibility of a second Storm, and I didn't get this PC until May 2011. Plus, even if we ignore all of this and operate under the assumption that I have the Storm worm on my PC, that still doesn't explain the fact that the traffic from my computer is heading to a private IP that is NOT, I repeat, NOT being used on my network, my router says it's dropping this traffic, but my PC is still somehow receiving a response from an IP address that 1) isn't on the network and 2) can't be having any packets forwarded to it, since the router says it's dropping the traffic.So, operating under the worst-case scenario assumption, I used two different virus scanners (not simultaneously, of course) to do the deepest scans they are capable of doing. They both turned up completely clean. In fact, I've had AVG Free installed on my computer since I got it, and even if you look at my virus history you only see a few tracking cookies, a corrupted EXE from the Skype setup folder, and a Trojan dropper that I never even ran because I thought the file properties seemed fishy so I scanned it and promptly deleted it. So I now have to go back to operating under the assumption that I do NOT have the Storm worm, and I am back to the drawing board.
During the last month or so my internet connection keeps stalling and will not work until I repair the connection, however I am still connected to the network, I just can't send or receive packets. In particular when I am downloading things, it will stop after 2MB is downloaded or 300MB, it just random. After sending/receiving 7,000 packets or 700,00. This only happens to my computer with the wifi adapter. Prior to this I didn't have any issues for over two years. My phone and laptop still connect via wifi to the internet. And the xbox and blu ray player are connected via ethernet and have not had any problems. The log for my router states "deauthenticate reason 3", which I have found to mean "The access point went offline, deauthenticating the client". So, I figured that the issue could be the wifi adapter which I installed on the laptop and that too never had an issue. I used inSSIDer 2.0 to see the close by networks and changed channels to get away from the strongest ones. I tried switching to wireless n only instead of g and n, the problem still persists.
Then I figured the issue must be my computer and no malware, spyware, adware nor any virus was found. The same thing happened while in safe mode. I also tried the winsock fix to no avail, reinstalled the wifi adapter and made sure all firmware for the router and adapter were up to date as well as XP. I also tried with my firewall shutdown but I still loose the connection. So I then reluctantly did a clean install and even with the bare essentials it still stopped working. I also bought a 15ft USB extension to get a better signal but still, even though I have a good or excellent signal I still have problems. My latest thought was this was the only machine running firefox 4 so I went back to 3 and that didn't either. I checked my usage with my ISP and I am no where near the 250GB a month.
I keep getting disconnected and blocked from using even LAN on my computer. This happens whenever I visit certain websites. For instance, I registered on a website that has me "kept signed in", and whenever I click to view that website, it partially loads and then for precisely 1 minute any network activity I try (like visiting my router configuration page, or clicking refresh or home to load google) will not go through. Only after that one minute is over with, I can resume browsing that website; however, if I leave it for too long, and then return, the same thing happens.
I've also noticed that if I sign out of that website and then visit it, that disconnect issue won't happen.But that isn't the case with other websites, as they require no accounts and are just pages with news and other stuff.I tried uninstalling and reinstalling my ethernet drivers, tried flushing dns, renewing ip, releasing and some other /cmd stuff that I found online.This also doesn't happen on any of the computers connected to my router (although, they are all using wireless - I am using cable to router).I'm on windows 7 x64, using a realtek ethernet card, Nod32 security suite (think it may be the settings on this thing? I set everything to super safe settings so I don't get any dumb viruses). Windows is updated (well, at least 3-4 months ago it was updated). I have no idea what is causing this, and why the precise 60 second interval until I regain access to the internet.I'm using Firefox, but this also happens on IE8 or 9 or whatever I have installed, so I don't think it's a browser issue.Things like facebook, youtube, pennyarcade and other junk work, but as soon as I go to google looking for, say, apartment rentals and open some pages, one of the links in the search results is bound to make my connection freeze.
Is there any way to hide my activity on the network? My network administrator monitors our network activity, specifically chat.
View 1 Replies View RelatedI purchased the license P/N: ASA-CSC20-250U-1Y with Description: ASA 5500 CSC-SSM-20 250-User License Only Renewal (1-year)
But I had a mistake because I need support to 500 users. Now, to solve my mistake I want to know Do I can purchase another ASA-CSC20-250U-1Y to provide the 500 users suppor?
I mean, ¿are two (2) ASA-CSC20-250U-1Y equivalent to the 500 user license listed below?P/N, ASA-CSC20-500U-1Y with Description: ASA 5500 CSC-SSM-20 500-User License Only Renewal (1-year)
I am triing to migrate my old ACS to the new one. I am using ACS 5.3 on appliance CSACS-1121. Sometime, i loose the connection to the appliance and i could not connect to the appliance with SSH, i could not start the GUI and the authentication is switched to the secondary instance. As soon as I have traffic, the connection is restored.
View 3 Replies View RelatedI wonder if there is a free programme that will let me look at network traffic/activity on my network, i'm having real issues with with access and the slow down of the network. Unfortunately my switches are not managed.
View 2 Replies View RelatedASA 8.2(5), uauth absolute timeout is disabled and inactivity timeout is set to 48 hours:
timeout xlate 48:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:00:00 absolute uauth 48:00:00 inactivity
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
Users still get kicked out every 8 hours and they have to reauth. This is a logging message:
%ASA-5-109012: Authen Session End: user 'john', sid 839, elapsed 28801 seconds
I have worked at many compaines and I always see route filtering performed the same way when using BGPv4. Prefix list. Why do admins use this method. Dont route-maps/distribute list perform the same function ?
View 2 Replies View RelatedI was able to connect to my 5ghz and 2.4ghz networks just fine. Now today I get a message that the connection timed out whenever I try and connect to the 5ghz. I have done a 30/30/30 reset, and still no joy. The one thing I haven't done yet is a 30/30/30 with a configuration from scratch. I will probably try that later. I've done the usual things like change the channel and all that, still no go. Other things I've done, change the network name, change the MTU, restart my machine. However, this is happening on other devices as well. The 2.4ghz network, solid as a rock.
View 1 Replies View RelatedThe server is running Microsoft Windows Server 2008 R2.The four other systems connecting to the server are running Microsoft Windows XP.Is it possible to have all four users connected at the same time remotely using a remote desktop client to the server? I'm using Teamviewer right now, but not sure if it will work with that.
View 3 Replies View RelatedI can't remember clearing the log with a clear counters. Router is a CISCO 3925-CHASSIS (revision 1.1) with C3900-SPE100/K9..System image file is "flash: c3900-universalk9-mz.SPA.150-1.M4.bin"..I did a : clear counters, enter. got this standard message >> Clear "show interface" counters on all interfaces [confirm], enter and it CLEARED the LOG BUFFER as well !!!! never seen that before. Its a newly turned up router, repurposed from another part of our network.
View 1 Replies View RelatedI've got an HP Microserver, running server 2008 R2 foundation, and I'm using it for file sharing. All files are in a single folder with subfolders, and located in drive C.
The problem is that the server limits the number of LAN connections to it to 31. I've already changed the max. number of connections to the maximum, but doesn't seem to work. Network discovery and file sharing are on, firewall is off, full access rights for everyone.
The error I get when trying to access the shared folder is: 'Microsoft Windows Network: No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept'
I have five (5) sites all connected via static VPN tunnels. They are all using Cisco ASA 5510s running 8.4(4)1. Any internal IP on each site can ping any IP on a remote site, because of the static VPN tunnels. I have the external IP (routeable) addresses connecting to each other.
Site A: 10.1.0.0 /24
Site B: 10.2.0.0 /24
Site C: 10.3.0.0 /24
Site D: 10.5.0.0 /24
Site E: 10.10.0.0 /20
I have remote users who connect using Cisco AnyConnect 3.1 to Site E. They get a static IP within the 10.10.100.0 /24 subnet (vpnpool00) and can access anything in the 10.10.0.0 /20 subnet. So far, so good.No management wants users to access devices within the other sites, specifically Site A using teh same AnyConnect connection. In other words, they get an Ip address of say, 10.10.100.5 and now need to access a server on Site A's subnet or 10.1.0.5.I have checked my NAT statements and they appear to allow this, but so far when I do a ping I get the following: Routing failed to locate next hop for ICMP from outside: 10.10.100.5/1 to inside: 10.1.0.5/0 What am I missing? Is there a NAT statement that is wrong, or an access-list statement or possibly a static route?
I am migrating over from and old PIX to an ASA 5510. After configuring the new device everything else is functional (Internet) but users are unable to pass traffic when connected through the vpn, they are able to authenticate and I see their session connected on the ASDM but no data is passed..[code]
View 4 Replies View RelatedI got the task of setting up a Guest wireless network for one of our remote campuses. We already have some APs that are connecting to our WLC.
The Enviroment:WLC Cisco 5500 is at our Corporate office. Connects to our Core Switch then to our Router Router connects to our remote campuses over mpls.
We currently already have APs at this campus that are connecting back to our WLC.
We have a DSL line at the remote campus that we want this Guest wireless routed to.
I have already created the guest network on the WLC and a guest VLAN on the Core switch.
My main question is how to configure the two routers for this and have this go out the DSL modem?
designing a wireless network for an apartment complex. The complex is shaped like like an rectangle, fairly small, maybe 100 feet on the ends and 300 feet long on the sides. There are 130 people that we are assuming may have about 3 devices each that they will connect to the wireless network, potentially simultaneously, as this is in a college environment. We have plenty of bandwidth and down/up speed. We are running 30 megabit down and 10 up. I am planning on having a router with two access points centrally located in an apartment and extending the network out with antennas in each direction from the access points with Omni directional antennas. The Access points that I am planning on using are Cisco WAP200 with maybe a Linksys router, as the router should not have more than 10 connections on it. I need something that will not crash after 10-15 users connect to it because it jams up from overload.
View 3 Replies View Related