Ok I have a toshiba satellite with the above stated modem in place, however I am not sure if the modem is wireless capable. I have been trying to figure out how to connect it to my network.
View 2 RepliesI have 3 pieces of hardware:
1. Green Packet DX-230 WiMAX modem with router
2. D-Link DIR-615 ver G2 (from my ISP)
3. D-Link 8 port desktop switch
I previously used the DIR-615 with my high speed broadband connection. However I had to move to a new house and here I can only get WiMAX. I want to...Place the WiMAX modem upstairs to serve as modem and wireless access point Have the DIR-615 function as the main router and firewall (downstairs) Use the switch to connect all the rooms in my house FYI my WiMAX modem has no connection configurations. I just plug it in and it'll connect automatically to the WiMAX signal. It has 2 LAN ports but no WAN port. From my understanding of networking, I have to turn off DHCP on my WiMAX modem, put it in the same IP range as my DIR-615 (192.168.0.100-199), and disable UPNP and NATPMP. After this I'm stuck.How do I tell my DIR-615 to use the WiMAX modem as it's WAN connection?Should I reserve an IP for the modem in my DIR-615?
I have Zyxel Modem configured in bridged mode with static IP from ISP. I want to connect multiple PCs to modem via switch so that each PC use the same configured Public IP address to use the internet. For this (generally) I would need to configure NAT for that IP. But I want to know that will it work under bridged mode or not?
View 8 Replies View RelatedI'm having trouble connecting my 02 dongle to the internet using my router. My router is a TP-LINK MR3420 and my 02 modem device is E1752. I checked to see if the modem is compatible and it says it is. I went through the configuration that was given to me with the router and I tried using you tube but nothing. Do i need to get a static I.P address off my Internet provider? If I plug my 02 usb dongle directly into my computer it works perfectly and I got the router to work using a ethernet cable and plugging it into the WAN port at the back of the router but I would prefer to let it connect through the 3g port. I get a connection at 40% and 100 bytes are sent and some are received but the connection drops. Is it a problem with the connection? I will upload a image.
View 3 Replies View RelatedWe recently upgraded to higher speed internet and were to "reset" our modem, which is PCI Soft Data Fax Modem With SmartCP.How does one "reset" their modem?
View 1 Replies View RelatedI just got a new Toshiba Satellite C855D-S5357. It's running Windows 8. I can't get it to connect to my home wifi--it just says "Can't connect to this network" and nothing else. I did unplug and plug back in the router (does that count as resetting?) and it didn't change anything. I just went to the library and it connected to that wifi without a problem. While there I uninstalled all Norton security products and installed AVG Free 2013. Still not working.
Windows IP Configuration
Host name: Emily
Pimary Dns Suffix:
[Code]......
I have a Toshiba portage and I am unable to connect to my wireless network at home. All my roommates can and two days ago I could! I haven't changed anything and none of my roommates or landlord has done anything. When I try to "diagnose" the problem I get the notice that there is a problem with the adapter. I have tried disabling everything and restarting it. The wireless switch is on. The security info is all correct and we have tried the restarting of the router.
View 8 Replies View RelatedIve just bought a new toshiba notebook c850 andf i want to connect to the internet using a wireless usb modem. Ive used 2 seperate modems and none of them work it keeps saying to reinstall or update the device. I dont have wifi and these modems work on all of my other computers why not this one?
View 1 Replies View RelatedI have a Toshiba Portege Z935-P300 and I have had no problems connecting to the internet until about 2 days ago.My computer detects the home wireless network but states that it was unable to connect. All other computers, tablets, cell phones in the house can connect with no problem. When I tried to connect to the internet with an ethernet cable, it worked just fine.I'm not sure if this is related but this happened at about the same time as my roommate got an Xbox and started using it. He can connect just fine too.[CODE]
View 3 Replies View RelatedI have toshiba c600 a259 with core i3 processor. the laptop is great but it has one big problem with the network wireless card.. everytime i try to connect to my home wireless network the computer freeze and i have to press the power button to turn it off. however i tried connecting to another network somewhere else and it worked fine. There is nothing wrong with the wireless network router because other laptops can connect to this network. my toshiba also can connect to interrnet if i plugged it directly to the router. My wireless network card model is: atheros AR9002WB-1NG
View 1 Replies View RelatedI recently reformatted the hard drive and when I finished I tried to connect to our home network and the laptop will not. The wireless is on, the network shows up, I click connect, put in the password, but it keeps coming up that it cannot connect. When I click diagnose, it reads that I can either try reconnecting to the network or reset the wireless router/access point and try again. We have a desktop connected, 2 laptops, & TiVo with no problems. This is the only laptop that has a problem. Yesterday I reformatted another Toshiba laptop's hard drive and had no trouble reconnecting to the home network. I've read several threads regarding this matter, and have tried the following:
(1) TCP/IP stack repair options for use with Windows Vista - nothing looked unusual with each step, and (2) ipconfig /all - attaching the txt file with results.
I am at a loss. I don't want to hard wire it as the last time I did this, the internet was lost on all of out devices and it took me a day to get it back to the way it was.
is it possible to connect the wan port of a cable modem to a lan port of the home network? the reason is, i need some wifi access and more ports to my wired network, and the most reasonable solution would be a cable modem router with wifi and 4 ports just plugged into one of my routers.
View 2 Replies View RelatedI had Symfony modem with Asus ap and 1 d-link switch. i changed my modem because that was old and bought TP-Link(TD-W8961ND).It is connected to the Dlink switch and the switch is connected to the Asus Ap(RT-N12) The situation was the same just modem has been changed. Now i have this problem: i have internet with cable every where...behind switch or behind Ap...but when i wanna use internet with wireless via Asus Ap it doesn't work i checked every thing...the Asus Ap has 3 mode(Ap,Router,Repeater)...i chose every one but only repeater mode works. by the way with modem wireless i can get to the internet but the signal is fair for me to use!
View 9 Replies View RelatedI have two netgear wireless modem / router. I want to connect my internet, NAS and Media player on one device (netgear modem/router) and want to link the other netgear in my bedroom and connect another media player and also use the internet via primary netgear modem/router wireless connectivity.
View 1 Replies View RelatedI have an ADSL connection using a wireless DLink modem 2730U I want to share my internet with my neighbour as limited speed and limited traffic.How can I do this? Is it possible as wireless?
View 4 Replies View Relatedi have a home network my dell netbook and dell xps desktop are connected to it, both are able to connect to the internet, my toshiba satellite for some reason won't connect. i think the wifi radio isn't working because there is an icon on the front of the lapptop with a picture of a wifi transmitter, and the amber light is lit for that. my router won't recognize it and neither will the other computers. it was working just fine to connect to the internet before i set the network up with the other two computers. the toshiba is the only one that has windows 7 btw, the others one has vista and one has xp. don't know if this has anything to do with it, but im stumped. i trtied to do it manually, but the router keeps saying the mac address is invalid, i get that from ip config.
View 1 Replies View RelatedI'm having trouble getting my laptop to stay connected to my wireless internet. This problem only occurs with my laptop (other laptops in the house are able to connect no problem) and with this particular wireless box (my laptop has no problems connecting and staying connected to other wireless networks, wi-fi, etc.).
I am able to connect to the wireless but it lasts only for a few minutes before connection is lost, so I basically have to connect to the internet through a ether cable (?) plugged into the wireless box.
I can't work out where the problem could be as the wireless works for other computers, and my computer works with other wireless networks!
I don't know if it matters but I am using a Toshiba satellite running on Windows 7.
I'm experimenting/attempting to use a laptop as a network tap between my (DSL) modem and a wrt54gs by creating a bridge with two NICs in the laptop. My problem is I can't seem to get connectivity on the user end of the router. I can't ping the bridge from an end computer...
DHCP is disabled in the router, but even when manually configuring the IP address on an end computer and using the bridge as a default gateway I can't ping out.
Am I completely misunderstanding the purpose of a NIC bridge?
so yesterday I went out and bought a new Cisco Linksys E4200v2 router. My ISP is Communicomm (terrible, but they're the only one here). I also have a Terayon TJ 715x cable modem. I shut down pc & cable modem, connected everything, and powered back up. I am able to access the router config page at 192.168.1.1, but the router does not receive an ip address from the modem. If I plug the modem directly to the pc, I get an ip and am able to connect to the internet. I have called my ISP several times, and they tell me that they do not use MAC address filtering. The only MAC address that they need is that of the modem, which they have. This modem has been working fine for several years. After spending over an hour on the phone with Linksys support, they have determined that the router is functioning properly.I also tried hooking up an older netgear router and got the same results. The following is my ipconfig with the modem connected directly to the pc. [CODE]
View 4 Replies View RelatedI have an annoying problem with my netbook. It's a Toshiba NB525. My laptop can access the internet and connect wirelessly at home.
I'm currently staying at a hotel. I can detect and connect to the network but no internet.
The way the internet at this hotel works is that it redirects you to a site to log in before gaining access.
It seems to work intermittently but very rarely. Requiring me to reset the connection multiple times. Problem is, my other devices work perfectly fine to connect.
I have a wireless modem on the first floor of my house, where I got cables through the wall running throughout rooms in first floor, ground floor and basement.I have my small business at the basement, so I have 2 PCs one printer and one external hard disc which also connects directly to a modem/router.I have 3 PCs from the first and ground floor that connect through the wall to my modem, and everything works well. But for my basement, which only has 1 lan cable output on the wall, I got myself a router so that I can connect all my devices.I connect the router with my modem, and then the PCs, printer and hard disc on the router. The PCs have internet access, so I know the connection to the modem has nothing wrong to it. But I am not able to access the PCs connected to the router from the PCs connected to the modem, or vice versa.
I was told to not obtain an IP address automatically, so I assigned my modem and router to work on 192.168.10.x and gave my PCs IPs such as 192.168.10.19 Only after setting this up did all my PCs have internet access, but again, no network communication between PCs on modem and PCs on router.One thing that might be worth mentioning, is that through time, my network keeps going from Home Network: Network, to Network 2, Network 3, and so on... now it's on Network 5. I have no clue why this happens, and if it's related to my problem
What I learned was it was bad to connect directly to the modem because you are left open to the internet. Currently my friend just got the internet and I told them to buy a router but they did not, and just have it directly connected to the modem. Is this fine, because they only have one computer, and it works fine for now, but wouldn't this be prone for attack?
View 3 Replies View RelatedMy Wifi network has a wpa2 password that is a random string of characters and numbers and yet last month a rogue IP Address kept popping up on my DNS list. It has to be coming from my neighbor who's bedroom is about 15 feet away from my router. So unless someone is sitting out on my front lawn to do this then it must be him.I've been looking for software that will notify me when a connection my router is attempted and kudos if it also asks my permission first would be great.There are wifi packet sniffers out there like Cain&Abel, Airsnort, that sort of thing but I am not quite savvy enough nor do I want to turn this into a complicated hobby but just need a basic warningin case something gets past my passwords again
View 3 Replies View RelatedI think that my ISP is throttling my bandwidth at the modem . how access full available bandwidth.When the technician installed the fibre optic line and then the modem, he showed me an amazing 77MB/s (about 600Mbps) before the modem!!But after the technician left these were the test results after the router:
1) SpeedTests.net:
averages, after router, show: UP between 56/60Mbps & DN 45/75Mbps
2)Local Server Speed Test:
average: UP 45Mpbs & DN 170Mbps
A Japanese Internet savvy guy explained that NTT East throttles the available bandwidth at the building by specific apartment/modem settings related to individual contract bundles. I signed up for the top bundle: TV, Phone and Internet connections.This is my Hardware/ software setup:
OS: Win7,
Line specs:
Line type: IEC60874-14
Connector type: SC
Core across: 9 micrometers
Clad across: 125 micrometers
ITU-TG-652
NTT East fibreoptic TV/Internet/Telephone bundle (100Mbps best effort) Hikari Next Family Type but 10Mbps is considered within parameters
Asahi ISP Internet contract
Modem:
GE-PON (WAN+Coaxial TV antenna)
"SCM-GE-PON-<H>A GV-ONU D<1>" model
Router:
RT-S300HI (4 Giga ports + 1 phone)
Router & Modem have Japanese firmware which I cannot understand and, according to the NTT East, I must rent both modem and router from them and "will not support any other modem/router setup".I could not understand if it was because of technical or contractual limits.
I have tried to test my throughput after the modem but I could not figure out where the DNS, IP, WAN etc strings of numbers should go and, in the end, I simply cannot connect to the internet from my laptop directly to the modem so I cannot perform the same speed tests after the modem.
Region : UnitedStates
Model : TD-W8960N
Hardware Version : V3
Firmware Version :
ISP :
My Toshiba laptop can't get connected to the wireless ADSL modem router TD-W8960N. I have 4 different laptops and one desktop, all connected to the router very well, only the Toshiba cannot get on Internet. I can connect to the wireless network on the laptop, but it shows limited access.
i cant connect to wireless connection..it says/ "windows was unable to connect to 2wire"
[url]....
I've problems connecting to my wireless network. i do not face this problem in the past until recently i've some problems with my laptop. after i re-format my laptop, i faced with this problem. here are some of the images i took.
View 11 Replies View RelatedI recently upgraded my wireless router from D-Link DIR-615 to D-Link DIR-685. Before the changeover, all of my devices were connecting to the router, although I had several problems with dropped connections, etc. The devices in use were:
- Desktop computer
- Laptop computer
- All-in-one touchscreen computer
- Netbook
- iPhone (original model)
- HP TouchPad tablet
- Sony Blu-Ray player
- Two internet radios (Aluratek and Livio)
- Wii
ALL of these devices were connected wirelessly to the network. When I set up the new router, I used a different network name/SSID, but kept the same security key/password. All of the router settings were kept the same (e.g., WPA-2, etc.). After the new router was up and running, every single one of the devices listed above connected (after an initial setup with the new network name, of course) EXCEPT the All-in-one/touchscreen computer. I've tried over and over, and it refuses to accept the security key/password. (The desktop, laptop, and touchscreen are all running Windows 7 64-bit Home Premium.) After doing some research, I tried some suggested solutions, but nothing seems to work. Nothing on the problem computer has changed since it was last connected to the old router. I checked the "Properties" of the network device on both the Desktop (which has no problems connecting) and the Touchscreen, and they are identical: WPA-2, AES, etc. And I'm 100% positive I'm entering the security key correctly. I've rebooted the router and the computer several times.
I have set up a wireless network in my home using s d-link N+ 300 DIR-655 and the desktop that is directly connected to the modem and router can connect to the internet and my laptop can access the wireless network and get online but I have another desktop that cannot connect to the wireless network. It can see it but when i try and connect i get the message that it was unable to connect or sometimes that i was able to connect but have limited connectivity.
View 6 Replies View RelatedMy laptop with Windows 7 64-bit is not being able to connect to the home wireless network. But other devises like iPad and iPhone and Mac laptop can connect to the same wireless network. However I can connect to the network if I connect my laptop directly to the wireless router using a network cable.I have tried upgrading the firmware in my wireless router but no luck. THis laptop had no problem before connecting to the same wireless network. But since I came back from the back home couple of days back I am seeing this problem. But my laptop can still connect to my my-fi devise wireless network. I have tried running the netsock commands listed in a similar thread in this forum but no luck.netsh winsock reset catalog netsh int ipv4 reset reset.log netsh int ipv6 reset reset.log
View 5 Replies View RelatedLately I've been experiencing connection problems between my router and cable modem. Every night after 11:00 PM EST, my Internet connection sporadically goes out. I called my ISP who said there was nothing wrong on their end. Plugging directly into my modem allows me to access the Internet. When I wake up in the morning, the connection is back until 11 or later again. I ran WireShark but I'm not sure what to be looking for. There are a lot of random things from the LLMNR protocol like standard query A zmtvrjaql.
View 2 Replies View RelatedI've tried everything possible to connect my blu ray player to my network. I've tried the auto setup, manual entry and cant come up with anything. I've followed all the instructions i can find on-line and i don't know if I'm overlooking something or what. I've got Philips blu ray home theater system and linksys wrt120n router
View 5 Replies View RelatedI am not sure what the problem is but my laptop wont connect to the wireless in my office, it connects fine to my wireless network at home..
View 13 Replies View Related