Home Network :: ADLS Modem Cannot Send Wireless Packets
Aug 6, 2012
I had Symfony modem with Asus ap and 1 d-link switch. i changed my modem because that was old and bought TP-Link(TD-W8961ND).It is connected to the Dlink switch and the switch is connected to the Asus Ap(RT-N12) The situation was the same just modem has been changed. Now i have this problem: i have internet with cable every where...behind switch or behind Ap...but when i wanna use internet with wireless via Asus Ap it doesn't work i checked every thing...the Asus Ap has 3 mode(Ap,Router,Repeater)...i chose every one but only repeater mode works. by the way with modem wireless i can get to the internet but the signal is fair for me to use!
View 9 Replies
ADVERTISEMENT
Nov 24, 2012
I can send packets from one router to another, however, I cannot send packets from a network to a different network?
View 5 Replies
View Related
Jun 6, 2012
I have a Linksys wireless router model WRT54G (not sure the exact model, it's not in front of me right now). It has worked flawlessly for the past several years, but for some reason has recently stopped working. I confirmed it's not a problem with the DSL Modem, as I can hard wire connect to my laptop and the internet works fine. It's clear something is wrong with the wireless router. I've tried unplugging, hitting the reset button on the back, and nothing has worked. My computer is able to recognize/locate the router and connect, it's just that I can't connect to the internet. One thing I've noticed under the wireless connection is that the computer is able to "send" packets, but not "receive." My experience is that this is always the case when I experience connection problems, but I have no idea what that means. I was going to call the Help Line, but I see it costs $30 which is likely more than my router is worth and probably 1/2 to 1/3 the cost of a new one so I am trying to troubleshoot myself.
View 8 Replies
View Related
Aug 6, 2011
i'm planning to use wireshark in my final year project (packet sniffing in wireless networks)and i alraedy installed it and captured some packets, but i don't know how to analyze those packets.I have basic information about networking from CCNA1. I want to learn how to anaylze the captured packets and what the hexadecimal values i got with each packet represent and how to read them.
View 1 Replies
View Related
Apr 23, 2012
At random times, my internet will "drop" connection and will not download any packets, but I am still able to send packets. My Local Area Connection icon continues to say I am connected, my modem is fully functional, and my cables are good. I can get my internet back up and running for 10 minutes or so by disable and re-enabling my Network Connection. If I simply try the "repair", it gives me an error at the "Refreshing IP" step.I have done a full system scan for viruses and I am clean. My drivers are fully updated, I have disabled my firewalls, and still no luck. During the times when it is down, I can successfully ping my modem through CMD, but I get the time-out error if I ping a site, my default gateway, the DHCP Server, or the DMS Servers.I have made no changes to any major settings on my computer, nor has there been any recent additions/removals of any software.
View 7 Replies
View Related
Mar 1, 2011
If I look at a site like wikipedia for example ,it has lots of text. If I capture those packets which made up that page using wireshark I cant find that text anywhere no matter what filter I use and even though I turn on ASCII. Is it because text is being rendered unreadable by some kind of compression?
View 7 Replies
View Related
Nov 16, 2012
i have two routers in my home one is my main router which is Netgear N600 and another Airlive router that is acting as a access point in the second floor attached by an ethernet cable from my firs router (Netgear n300). I bought WD 3TB network storage and plugged it to my Netgear router, i am able to access my files wirelessly from WD without any problems. However, i can't access WD if i am connected to Airlive.... well i can but it takes time to appear in my finder and when i tried to install quick view for WD it can't find WD in the network if i am connected to Airlive but it dose appear as soon as i am connected to Netgear.
View 4 Replies
View Related
Oct 11, 2011
Does RV110W-A-NA-K9 router have a utility to send magic packets to PCs on the LAN?
View 1 Replies
View Related
Jan 26, 2011
I've been having this problem on my desktop and it's really annoying when i try to play online games that need a constant connection.I have Windows XP and i'm using a wireless connection via a wireless USB adapter. The problem is that the internet is running fine but at random intervals it starts to not send or receive any packets. This will usually cause my to disconnecting during a game causing other players inconvenience. After I d/c the internet will usually take 5-30 seconds to start sending and receiving packets again and regain connection.
View 14 Replies
View Related
Feb 2, 2013
I have two netgear wireless modem / router. I want to connect my internet, NAS and Media player on one device (netgear modem/router) and want to link the other netgear in my bedroom and connect another media player and also use the internet via primary netgear modem/router wireless connectivity.
View 1 Replies
View Related
Dec 18, 2011
Ok I have a toshiba satellite with the above stated modem in place, however I am not sure if the modem is wireless capable. I have been trying to figure out how to connect it to my network.
View 2 Replies
View Related
Nov 14, 2011
I have 3 pieces of hardware:
1. Green Packet DX-230 WiMAX modem with router
2. D-Link DIR-615 ver G2 (from my ISP)
3. D-Link 8 port desktop switch
I previously used the DIR-615 with my high speed broadband connection. However I had to move to a new house and here I can only get WiMAX. I want to...Place the WiMAX modem upstairs to serve as modem and wireless access point Have the DIR-615 function as the main router and firewall (downstairs) Use the switch to connect all the rooms in my house FYI my WiMAX modem has no connection configurations. I just plug it in and it'll connect automatically to the WiMAX signal. It has 2 LAN ports but no WAN port. From my understanding of networking, I have to turn off DHCP on my WiMAX modem, put it in the same IP range as my DIR-615 (192.168.0.100-199), and disable UPNP and NATPMP. After this I'm stuck.How do I tell my DIR-615 to use the WiMAX modem as it's WAN connection?Should I reserve an IP for the modem in my DIR-615?
View 3 Replies
View Related
Aug 4, 2012
I have an ADSL connection using a wireless DLink modem 2730U I want to share my internet with my neighbour as limited speed and limited traffic.How can I do this? Is it possible as wireless?
View 4 Replies
View Related
Jan 8, 2013
I'm experimenting/attempting to use a laptop as a network tap between my (DSL) modem and a wrt54gs by creating a bridge with two NICs in the laptop. My problem is I can't seem to get connectivity on the user end of the router. I can't ping the bridge from an end computer...
DHCP is disabled in the router, but even when manually configuring the IP address on an end computer and using the bridge as a default gateway I can't ping out.
Am I completely misunderstanding the purpose of a NIC bridge?
View 1 Replies
View Related
Feb 12, 2012
so yesterday I went out and bought a new Cisco Linksys E4200v2 router. My ISP is Communicomm (terrible, but they're the only one here). I also have a Terayon TJ 715x cable modem. I shut down pc & cable modem, connected everything, and powered back up. I am able to access the router config page at 192.168.1.1, but the router does not receive an ip address from the modem. If I plug the modem directly to the pc, I get an ip and am able to connect to the internet. I have called my ISP several times, and they tell me that they do not use MAC address filtering. The only MAC address that they need is that of the modem, which they have. This modem has been working fine for several years. After spending over an hour on the phone with Linksys support, they have determined that the router is functioning properly.I also tried hooking up an older netgear router and got the same results. The following is my ipconfig with the modem connected directly to the pc. [CODE]
View 4 Replies
View Related
Oct 3, 2011
I have a wireless modem on the first floor of my house, where I got cables through the wall running throughout rooms in first floor, ground floor and basement.I have my small business at the basement, so I have 2 PCs one printer and one external hard disc which also connects directly to a modem/router.I have 3 PCs from the first and ground floor that connect through the wall to my modem, and everything works well. But for my basement, which only has 1 lan cable output on the wall, I got myself a router so that I can connect all my devices.I connect the router with my modem, and then the PCs, printer and hard disc on the router. The PCs have internet access, so I know the connection to the modem has nothing wrong to it. But I am not able to access the PCs connected to the router from the PCs connected to the modem, or vice versa.
I was told to not obtain an IP address automatically, so I assigned my modem and router to work on 192.168.10.x and gave my PCs IPs such as 192.168.10.19 Only after setting this up did all my PCs have internet access, but again, no network communication between PCs on modem and PCs on router.One thing that might be worth mentioning, is that through time, my network keeps going from Home Network: Network, to Network 2, Network 3, and so on... now it's on Network 5. I have no clue why this happens, and if it's related to my problem
View 2 Replies
View Related
Feb 8, 2011
What I learned was it was bad to connect directly to the modem because you are left open to the internet. Currently my friend just got the internet and I told them to buy a router but they did not, and just have it directly connected to the modem. Is this fine, because they only have one computer, and it works fine for now, but wouldn't this be prone for attack?
View 3 Replies
View Related
Sep 29, 2012
I think that my ISP is throttling my bandwidth at the modem . how access full available bandwidth.When the technician installed the fibre optic line and then the modem, he showed me an amazing 77MB/s (about 600Mbps) before the modem!!But after the technician left these were the test results after the router:
1) SpeedTests.net:
averages, after router, show: UP between 56/60Mbps & DN 45/75Mbps
2)Local Server Speed Test:
average: UP 45Mpbs & DN 170Mbps
A Japanese Internet savvy guy explained that NTT East throttles the available bandwidth at the building by specific apartment/modem settings related to individual contract bundles. I signed up for the top bundle: TV, Phone and Internet connections.This is my Hardware/ software setup:
OS: Win7,
Line specs:
Line type: IEC60874-14
Connector type: SC
Core across: 9 micrometers
Clad across: 125 micrometers
ITU-TG-652
NTT East fibreoptic TV/Internet/Telephone bundle (100Mbps best effort) Hikari Next Family Type but 10Mbps is considered within parameters
Asahi ISP Internet contract
Modem:
GE-PON (WAN+Coaxial TV antenna)
"SCM-GE-PON-<H>A GV-ONU D<1>" model
Router:
RT-S300HI (4 Giga ports + 1 phone)
Router & Modem have Japanese firmware which I cannot understand and, according to the NTT East, I must rent both modem and router from them and "will not support any other modem/router setup".I could not understand if it was because of technical or contractual limits.
I have tried to test my throughput after the modem but I could not figure out where the DNS, IP, WAN etc strings of numbers should go and, in the end, I simply cannot connect to the internet from my laptop directly to the modem so I cannot perform the same speed tests after the modem.
View 12 Replies
View Related
Aug 21, 2011
I have Zyxel Modem configured in bridged mode with static IP from ISP. I want to connect multiple PCs to modem via switch so that each PC use the same configured Public IP address to use the internet. For this (generally) I would need to configure NAT for that IP. But I want to know that will it work under bridged mode or not?
View 8 Replies
View Related
Jul 16, 2012
I'm having trouble connecting my 02 dongle to the internet using my router. My router is a TP-LINK MR3420 and my 02 modem device is E1752. I checked to see if the modem is compatible and it says it is. I went through the configuration that was given to me with the router and I tried using you tube but nothing. Do i need to get a static I.P address off my Internet provider? If I plug my 02 usb dongle directly into my computer it works perfectly and I got the router to work using a ethernet cable and plugging it into the WAN port at the back of the router but I would prefer to let it connect through the 3g port. I get a connection at 40% and 100 bytes are sent and some are received but the connection drops. Is it a problem with the connection? I will upload a image.
View 3 Replies
View Related
Oct 12, 2011
I use MS Outlook (Office 2007) to manage my e-mails. This works fine on my own wi-fi at home. However, when I am in Portugal and I connect to wi-fi in a coffee shop for example, and I load up Outlook, then I receive my e-mails fine, but I cannot send an e-mail.
View 5 Replies
View Related
Oct 26, 2012
The send light is steadily blinking. Yesterday I disconnected the cable into my main cable box connected to my tv, so I could move it into a new tv stand I bought, and ever since then I get no Internet connection (tv cable works fine.) I cant see how that made my Internet go out, but maybe it did. I checked connections on both ends and all cables are tightly secured.Here is a log of my modem, I found out how to get it through this site.[CODE]
View 5 Replies
View Related
Jul 20, 2011
Lately I've been experiencing connection problems between my router and cable modem. Every night after 11:00 PM EST, my Internet connection sporadically goes out. I called my ISP who said there was nothing wrong on their end. Plugging directly into my modem allows me to access the Internet. When I wake up in the morning, the connection is back until 11 or later again. I ran WireShark but I'm not sure what to be looking for. There are a lot of random things from the LLMNR protocol like standard query A zmtvrjaql.
View 2 Replies
View Related
Sep 27, 2012
Receiving more packets than sending in Vista Home?
View 1 Replies
View Related
Feb 18, 2013
i have an ARRIS TM822 cable modem provided by comcast, in addition i have a linksys e3000 wireless router. what i am trying to accomplish is to bridge the cable modem over to the router. i messaged comcast about this issue and i have attempted what they told me to do, but im not getting any where.
View 1 Replies
View Related
Dec 11, 2012
how to properly configure 2 different hardware devices to extend the current wifi signal of my home network.I'm using a Motorola SBG6580 DOCSIS 3.0 cable modem as my primary access point (AP) and a Netgear N300 DGN2200v1 ADSL2+ modem router which will function "behind" the SBG6580 in repeater mode. I previously had DSL for my internet connectivity but recently switched to broadband cable for faster speeds.Due to the layout of my home, I cannot physically connect the Netgear router to the Motorola modem via ethernet cable and need both devices to communicate wirelessly. I have already done extensive reading on this subject and best practices suggest that, whenever possible, both units should be the same brand/manufacturer. The Netgear appliance does have the capability of being configured as a repeater so if I don't have to buy a "network extender" that would be my preference.I understand that both units must be configured to have the same SSID, subnet, wireless channel and security encryption. In repeater mode the Netgear router can't be configured to use WPA2-PSK so I need to use WEP instead.
View 1 Replies
View Related
Jan 25, 2011
i use an asus k50c and used to send wireless network connection from it until recently when i upgraded my OS to windows 7 and changed my antivirus to AVG internet security 2011. whenever i try to set up an ad-hoc network, it doesnt prompt me to turn on internet sharing which used to be there before and now no other computer can connect to my network, though it shows on the wireless network list.
View 5 Replies
View Related
Nov 10, 2011
How to install a wireless network in home environment?
View 6 Replies
View Related
Mar 29, 2011
I can't get traditional broadband services, so I've been making due with Verizon's Mobile Broadband service. Problem is, it's expensive and has a 5GB cap per month. I read about powerline networking and thought it sounded good, so I bought all the adapters and a router. Problem is, I didn't have the prior knowledge to realize I also needed a modem as well. How or if I'd be able to set up any sort of modem in my home, considering services like Verizon can't reach me?
View 3 Replies
View Related
Mar 13, 2011
I have been having a bit of trouble with networking my two machines to share files and allow printing i have a win 7 laptop and a xp home desktop. I share a net connection via 02 wireless box both systems have wireless i have tried many things
View 8 Replies
View Related
Feb 26, 2012
is it possible to connect the wan port of a cable modem to a lan port of the home network? the reason is, i need some wifi access and more ports to my wired network, and the most reasonable solution would be a cable modem router with wifi and 4 ports just plugged into one of my routers.
View 2 Replies
View Related
Feb 25, 2013
I want to acccess my office computer from Home PC.I have ZTE DSL Modem + Wireless Router and got new Static IP, so how to configure Static IP From BSNL.
View 3 Replies
View Related
Jul 24, 2011
I am wanting to buy an access point to extend my range on my home network. I think i've used one AP before and if i remember correctly, after i plugged it into my main rounter and configured it, i unplugged the ethernet from it and moved it to somewhere else in the house. But i can't remember for sure if this is how it works or do i have to have an ethernet cable running to it at all times?
View 10 Replies
View Related
