Broadband :: How To Enable Dhcp On Usb Modem
Apr 14, 2011i am using mblaze usb modem and i want to increase the speed
View 1 Replies
ADVERTISEMENT
Broadband :: Setup Internet Connection For Every System With BSNL DHCP Modem?
Jul 3, 2011I have 3 systems in my office, LAN connected. how to setup internet connection for every system with BSNL broadband DHCP modem.
View 2 Replies View RelatedBroadband :: Connect A Modem / Router To A Cable Modem?
Feb 7, 2012I have a cable modem installed to my property but want to use my modem/router to go wireless. The proble is my cable modem output is a RJ45 and the router input is RJ11.
View 10 Replies View RelatedPossible To Enable DHCP Server For Additional Routers
Mar 21, 2011So far we add any router in the existing network simply by disabling DHCP server, and adding LAN ip for that. We don't add WAN detail at all in the additional routers. And plug one cable from main network to the LAN port of the additional routers.So we basically use that additional routers only as a access point for WIFI.But what I wonder is if it's possible for me to use the additional routers with the same feature as of the main routers i.e. Enabling DHCP server so that it too can give its own DHCP ip address.
View 2 Replies View RelatedCisco Firewall :: DHCP Server Won't Enable - ASA 5505
Nov 1, 2012I get the following message when appling "DHCPD ENABLE INSIDE"
DHCP: Interface 'INSIDE' is currently configured as CLIENT and cannot be changed to a SERVER by a SERVER feature
This is an ASA 5505 Running 8.2.
Cisco 2611 Router - Enable To Hand Out Addresses Through DHCP
Oct 4, 2012I have a wireless access point, I want to be able to hand out addresses via the Cisco router through DHCP on the interface eth0/1. The wireless users that get an IP I want then route out the eth0/0 interface to my statically assigned default gateway. Right now Im not concerned with setting up security measures once this works I'll go back in and add that. Here is my running-config. Right now nothing from the 10.0.0.0 is being routed out to the internet.
View 6 Replies View RelatedCisco Firewall :: ASA5505 Disable DHCP On ASA And Enable On WNDR3700
May 13, 2013I have ASA5505 as my main router (192.168.15.1) and it currently it also serves as DHCP server. I have a WNDR3700 (192.168.15.2) which work as an access point and it provide wireless access for wireless devices. I have few dhcp clients where i can't setup static IP, and i want to restrict them to use static IP through MAC reservation.
1. Make ASA5505 to do the MAC reservation f, which will be easy setup for me. But as per my search its not possible.
2. Disable dhcp on ASA and enable dhcp on my WNDR3700. i tired this and dhcp clients are getting IP from wndr3700, but the problem is dhcp clients gateway defaults to 192.168.15.2 (as well as dns) and therefore no internet connection.
TWC Modem - Enable Bridge Mode
Dec 14, 2010I have a TWC wideband modem and service. I know that they will enable bridge mode if I ask them. My questions are. After they enable it whats my setup? Do I just run a cable from their modem into a new router that I then set up on my own? Is it that simple?
View 2 Replies View RelatedCisco Switching/Routing :: Enable Dhcp Service On 3560 Switch
Mar 19, 2012can you enable dhcp service on a 3560 switch.
View 3 Replies View RelatedCisco Switching/Routing :: 2950 - DHCP Server With Command To Enable It
May 4, 2012I am wondering if it has its own DHCP router and if theres a command to enable it?Also Random side question. it hands out ip addresses to other devices (the 2950 im using infront of a router) but when I hook up another switch to this switch it doesnt initialize the port or try to connect? why.
View 1 Replies View RelatedCisco WAN :: 1941W / IPv6 - Cannot Enable DHCP Client Prefix Delegation
Feb 3, 2011I am struggling turning on DHCP client prefix delegation on a dial 0 interface on at 1941w.
Everything can be configured apart from prefix delegation features. The following command is just are missing.
int dial 0
ipv6 dhcp client pb
I have configured this on a 877 router with no problems. I have tried 15.0(1)M3 and 15.1(3)T.
Wireless :: How To Enable Internet By Modem In Notebook 7
Apr 4, 2011how to connect modem?
View 1 Replies View RelatedBroadband - The Modem Is Already In Use
Jun 8, 2012Im having problems connecting my broadband to the internet, when I press the "Connect" button here is what pops up;
Quote:
The modem (or other connecting device) is already in use or is not configured properly.I've tried doing;
1. Tried installing the software+driver to other laptops and it works fine.
2. Tried changing different modems and installed the required driver but ends up not able press the "Connect" button at all.
3. Tried Uninstall/Reinstall the software/Driver.
4. Disable/Enable driver from Device Manager.
5. Tried Doing a Recovery system but fortunately the recovery system goes as far back the first time I've tried installing this device.
6. Tried disabling Anti-Virus
7. Tried installing old version of Mobile Partner but it seems like it didnt detect the device and a pop-ups saying "Failed to find Port" when installing Mobile Partner 2.3 .This laptop used this broadband before 1-2 months ago.
Broadband :: How To Speed Up Usb Modem
Apr 14, 2011i want to speed up utorrent and idm downloading speed and i am using mblaze usb modem(mts)
View 1 Replies View RelatedBroadband :: PC Won't See Netgear Modem
Apr 18, 2011I am hard wiring a Netgear wireless modem DG834G to the LAN connection on my PC. The modem lights up, the internet light flashes then goes green and the connection to the PC is lit. My PC wont see the modem - when I type 192.168.0.1 it cannot access the Netgear setup page. I have tried swapping the cable and even bought a PCI Lan card and installed it but the modem wont work in either port? I've had the modem checked out and it works fine it's just something in my PC stopping it from seeing the Modem. At present I have a USB modem hard wired which works fine. I unplug this when trying to setup the NEtgear modem...
View 6 Replies View RelatedBroadband :: Use Wireless Modem And LAN Together?
Mar 4, 2011I have a Lan connection operating through a DSL. I also have a Wireless 3G modem. can I use both at the same time to boost my connection speed?
View 1 Replies View RelatedBroadband :: Connecting A Modem To Router?
Aug 23, 2011I HAVE AN I BALL BATON iB lr6111a and i need to connect the same to a router but it has only one rj45 port since the router dont have a modem how can i connect it to a modem with only one port.
View 1 Replies View RelatedHow Secure Is A Broadband Modem Like Version 4g
Oct 13, 2012How secure is a broadband modem like version 4g lte hooked to a computer rather than hooked to wireless router
View 3 Replies View RelatedBroadband Modem Is Working But Cannot Get Online
Apr 29, 2012I don't think it's my PC, because I tried using the Ethernet cord on my laptop, and got the same error "limited or no connectivity..." When I try to troubleshoot on my PC, it says the modem is fine. All the lights are green on the modem. I did notice that I have an IP address, but no Gateway Address. Also, I'm sending few packets, but receiving even fewer.Is it safe to say that this is a modem issue? Or something else? Is there anything that can be done? -resetting the modem did not work.
View 14 Replies View RelatedBroadband :: How To Configure Aztech Modem
Mar 30, 2011I need line settings for manual configuration.becouse seens i change my modem to aztech,i got a slow connection,not like before(good).
View 1 Replies View RelatedLinksys Cable / DSL :: Anyway To Enable Telnet Access On WAG120n Modem / Router
Jul 18, 2011I'm trying to find out if there is anyway to enable telnet access on the WAG120n modem/router .I can't seem to be able to find related info in the support web site for this device. Any info if telnet is even available ?
View 2 Replies View RelatedBroadband :: Ethernet Modem Light Blinking
Jun 14, 2012HandPunch 3000 Time & Access Device, no Communication over the Ethernet, on the Ethernet Card the red light flashes for 1sec then red & Green for 1sec.
View 1 Replies View RelatedBroadband :: Reset PCI Soft Data Modem?
Feb 9, 2011We recently upgraded to higher speed internet and were to "reset" our modem, which is PCI Soft Data Fax Modem With SmartCP.How does one "reset" their modem?
View 1 Replies View RelatedBroadband :: How To Connect Desktop And Laptop In 1 Modem
Jan 7, 2011connect the desktop and my loptop in one modem
View 1 Replies View RelatedBroadband :: How To Block Modem Internet Speed
Jan 5, 2011i recently opened internet cafe,i have internet connection of 8mbps, and i have 6 computers, and internet speed distributes 8 mbps to per computer, i want to decrease this speed, i want to give 1 mbps to every computer
View 1 Replies View RelatedChange O2 Broadband Modem To Draytek Vigor
Dec 17, 2011I have recently changed my Router to a Draytek Vigor 2830N from the standard O2 broadband router. When I swap them out I get no internet access via the main PC that is connected via ethernet. However I can access internet via WLAN on any other device. here are the ipconfig details for before and after swap (same)
View 3 Replies View RelatedBroadband :: Modem Driver For Windows 7 Of Linktop Ct800p?
Jul 31, 2011modem driver for windows 7 of linktop ct800p
View 2 Replies View RelatedBroadband :: Direct Connect Cable Modem To Computer?
Jan 7, 2011I have a new router (ASUS RT-N10)and It is asking me to direct connect my cable modem to my computer, and then find my MAC address via command prompt, and clone it to the new router.I can get to my command prompt, the problem lies in windows 7 and vista's (or mine) inability to realize that my network card is directly connecting to the modem. (No internet connection available, doesn't think anything is connected). I have tried on multiple machines to try and find my modem's mac address but it simply is not working.I want to know if I can find the mac address through the old router, or what I need to do to have windows 7 recognize I'm directly connecting the modem to the PC.
View 3 Replies View RelatedBroadband :: Adsl Modem / Router Mac Changing In Dos Prompt?
Jan 26, 2012Modem/router mac address changer .. i have globe wimax bm622i model, that needs to be change its mac address, hardly to find a right software, so i decide to manually config and do it by ms-dos commands, any related command for dos to change mac address of globe-wimax-bm622i-model.
View 1 Replies View RelatedMotorola Surfboard SB6120 Modem / Can't Get PC To Connect To Broadband
Jun 22, 2011I can't get my PC to connect to my broadband. I am running windows 7 64 bit and use the following:
Motorola Surfboard SB6120 modem;
NetGear WGR614 wireless router
I am able to connect with other devices (iPhone, Roku) to my wireless through the wireless router. My computer recognizes the broadband connection, but it won't connect to it. I get two errors when I try to connect:651: the modem has reported an error, and 638: the remote server is not responding in a timely fashion.I have tried connecting the ethernet cable directly to the modem, but I get the same results.Also, I have tried to cycle down the computer, router, then modem and turn them back on in reverse with no change in results.The connection worked until I clicked "disable connection" one day when I had trouble connecting (high traffic i think). Since then, the"home group" I set up originally with the connection wizard disappeared, and it had not been able to connect since then. When I try to connect I click on a small icon in the lower right that says, "not connected, connection available", then I click on the button to connect to broadband and get the errors described above.
Broadband :: DSL Modem Connection Giving IP Address Conflict?
Feb 5, 2012im recieving ip conflict adress error i have an dsl modem and its my individual i ave not share a connection with anyone.and whenever i recieved this error my net works zero
View 1 Replies View RelatedWestell 7500 - Can Dsl Router Connect To A Broadband Modem
Sep 11, 2011can a westell 7500 router/modem dsl from verizon connect to optimum broadband cable?
View 1 Replies View RelatedCisco Routers :: How To Use SRP527W And Telstra Broadband USB Modem
Aug 4, 2012Digital Business and my SRP527W router has just arrived. While I wait for my digital business to be activated i've got a small Eee PC shareing its internet connection through a D-link (piece of garbage) router into my server and out to my LAN.
What I would like to do is install the USB modem into the USB slot of my Cisco Router so i can finally get my data cabinet set up.
The problem is that the Telstra modem when being installed onto a computer, it requires a PIN to activate and then you are required to 'connect' via a little user interface.
Will this be an issue? Will i be able to connect my USB modem to my router while i wait for Digital Business to get going?
