TWC Modem - Enable Bridge Mode

Dec 14, 2010

I have a TWC wideband modem and service. I know that they will enable bridge mode if I ask them. My questions are. After they enable it whats my setup? Do I just run a cable from their modem into a new router that I then set up on my own? Is it that simple?

View 2 Replies


ADVERTISEMENT

WRT54G - Put Router / Modem In Bridge Mode And Use Different One?

Aug 29, 2011

I have an SMCD3GN (from Rogers) that is both a Modem and a Router. I also have a Linksys WRT54G router that I used to use before. The SMC is giving me a lot of problems. The connection is really bad often and my internet speed drops for no reason all of a sudden. I'm getting fed up and want my old router back.

I know it's possible to change the SMC into a modem (put it in bridge mode) and then connect my router and use the Linksys router instead of the SMC. The problem is, I don't know exactly how to set it up and would really like an explanation. I already know how to get into the SMC and Linksys settings as an admin.

View 1 Replies View Related

D-Link DIR-655 :: Modem Running In Bridge Mode

Jan 15, 2013

 I currently have frontier dsl internet and am using the isp provided modem/router combo and a DIR-655. I have the modem running in bridge mode and the 655 set to PPPoe connection, MTU at 1492. I confirmed the MTU setting on the isp modem/router before bridging it. The question i have is if the router MTU is set to 1492 does everything on the LAN side of the router run at 1492 or does it run at 1500 while the router breaks the packets up? Everything works fine but my pc's all use vista and i'm not sure where to check the mtu settings at and all my game consoles are set to mtu automatic so i can't really see what they're running at either.

View 7 Replies View Related

Cisco Routers :: Put The SRP 527 Into Bridge Mode To Use It Just As A Modem?

Mar 20, 2011

Is it possible to put the SRP 527 into Bridge mode to use it just as a modem?

View 6 Replies View Related

Cisco Switching/Routing :: Configure PPPoE On 831 Router With Modem In Bridge Mode

Sep 7, 2012

config to setup PPPoE on the cisco 831 router to be used with a modem in bridge mode. I have tired other peoples configs found on the web but, not all the commands were available on the IOS version thats on the router. Also note that I bought this as a used router and I dont have a service contract so I am unable to download an updated IOS. The router ver is 12.3(7)T9 and the IOS is c831-k9o3sy6-mz.123-7.T9.bin. Running config below is last tried still could not connect or get ip address from isp. [code]

View 2 Replies View Related

Linksys Wireless Router :: E4200 - DSL Modem In Bridge Mode Reports Full Speed

Dec 21, 2011

I have a d-link dsl modem that reports it's getting the full 6 meg download speed from AT&T.   I put the dsl modem in bridge mode so the E4200 will do the logon to AT&T with my credentials.   If i do a speed check using CNET internet speed test, from both a desktop (wired 1gb card) and any laptop in the house (all draft n 2.4 or 5.0), it ranges anywhere from 3 meg to 4.3 meg.   I have 6 cat-e ethernet cords everywhere.   I do have 2 switches but have tried to unplug those to see if any difference

View 1 Replies View Related

Cisco Wireless :: Enable AES Encryption On 1310 WLAN Bridge?

Sep 19, 2012

I have requirement to enable the AES encryption on the management VLAN  traffic  between connected root and non root bridges .below is the network setup  .
  
Router<---->SW1 ( main office)--> Root-bridge < ---------->non root-bride------SW2 ( remote end site)
 
Apart from the specific configuration on the wireless bridge is any extra configuration required on the Switch interfaces?

View 1 Replies View Related

Enable Security Mode DLINK Dir-615?

Mar 4, 2011

How to enable security mode on DLINK wireless router DIR-615, after having it installed in "unsercured mode"?

View 1 Replies View Related

How To Enable The Security Mode DLink 615

Jun 5, 2011

How do I enable the Security Mode on a Dling 615 wireless router?

View 1 Replies View Related

Set WNR2000v3 To Bridge Mode?

Feb 6, 2012

How to set the WNR2000v3 into Bridge Mode. I can not find instructions on it in the user manual or the NetGear website. And Google.com has turned up not valuable results either.

I have the WRN2000v3 plugged into another router via Ethernet. I basically want to "dumb down' the WNR2000v3 into a basic Ethernet switch.

View 5 Replies View Related

How To Use Wrt54g V3 Bridge Mode

Jan 2, 2011

how use wrt54g v3 bridge mode

View 2 Replies View Related

Cisco WAN :: Can 877 Set Bridge Mode

Feb 6, 2012

I have 2 Cisco 877 routers and I need one set to bridge mode and one is gateway internet? How do I do?
 
(LAN)                
ADSL <---------------->877 <----------------> 877 Gateway <-----------> Clients

View 3 Replies View Related

How To Enable Atheros Ar9285 Promiscuous Mode

Sep 23, 2012

How i can enable promiscuous mode on my Atheros AR9285 Wireless Network Adapter? I'm using windows 7 starter.driver version of my Atheros AR9285 Wireless Network Adapter:9.2.0.427.

View 4 Replies View Related

Cisco Wireless :: Enable Mode On 2112 WLC?

Nov 8, 2012

Do we have enable mod eon 2112 WLC ? Also if we need to access WAP from WLC how can we telnet or ssh?

View 5 Replies View Related

Cisco AAA/Identity/Nac :: Enable Authentication Mode On ACS 4.2

Feb 8, 2012

how to Config the ACS 4.2 server runs in TACACS + mode (users accounts configured the ACS) mode  to authenticate enable mode  password on the asa using the same AD account?

View 10 Replies View Related

Using Netopia 3347NWG In Bridge Mode?

Apr 22, 2012

I have a Westell 6100 modem. After my old router, a DIR-655, got zapped by some electric charge from a nearby thunderstorm, I bought a Netgear WNDR3800 router. But I have not been able to get the Netgear router to connect to the Westell 6100 modem reliably [URL]

A friend had given me a Netopia 3347NWG router/modem some time ago but I had never attempted to use it. I was able to get into the web setup screens of the 3347NWG and, without attempting to connect the Netgear router to it, I was able to connect to the Internet via the setup screen. But every attempt to actually go to a web address would fail with a timeout, and efforts to ping always failed with a timeout. Yet the 3347NWG setup said I was connected.

Does anybody know how to setup the 3347NWG so it actually can connect to the Internet correctly so that I am able to surf to a web page or ping an address successfully ?

Does anybody know how to setup the 3347NWG in Bridge mode so that I can use it strictly as a ADSL modem and try to use it with my Netgear WNDR3800 router ?

If I can not use the 3347NWG with my Netgear router I had planned to send the Netgear router back for a replacement since it is not connecting relaibly to my Westell 6100 modem. But if I can get the 3347NWG to work as a modem and reliably connect my Netgear router to it, I will not have to send back the Netgear router for another one.

View 1 Replies View Related

Cisco WAN :: Configuring 800 In Bridge Mode

Aug 25, 2012

In the LAN side configured one Interface VLAN and Configure IP address on that and add the AP’s to the VLAN .. and on the WAN ADSL its p2p with Qtel bridge mode ..
 
from the Access Point I am able to reach 172.31.30.30 which is the router far interface . BUT still not able to reach the ISP side 172.31.30.29 .
 
Router Config

 no ip routing
bridge irb
bridge 1 protocol ieee
bridge 1 route ip(code)

View 4 Replies View Related

Can't Enable 1Gbps LAN On Server - Refuses And Goes Into 100 Mbps Mode

Apr 6, 2011

So I have a Windows 2008 R2 SP1 Enterprise Server and a gigabit LAN network card onboard. But it refuses to run at gigabit speed and if forced to it, it just says that network cable is unplugged and doesn't work.

I tried switching to a newer and better motherboard (still with gigabit LAN)I have updated drivers.I have checked cables (which are all cat 6 cables and work just fine with other computers in gigabit LAN mode)I've checked and switched ports on the switch and the switch itself...no change. They work just fine with other non-W2008 machines, they get gigabit LAN

I am completely stomped as to what I can do to fix this. It runs just fine in 100 Mbit mode, but can't in any way get it in gigabit mode.I am completely stomped as to why it refuses...is this a limitation of Windows 2008 or something or is there a fix to this?

View 6 Replies View Related

D-Link DAP-1522 :: How To Enable JTAG Mode On DAP-1160

Jan 24, 2011

I have a dead DAP-1160 (RTL8186). I would try the JTAG recovery, so I compiled

-) includes-0.4.2
-) readline-5.2
-) jtag-0.6-cvs-20051228

under ubuntu 10.10.I have the cable DLC5 Xilinx.The problem is: I do not know how to enable the JTAG mode on the DAP-1160.I understand that I must set a pin on the 147 on the RTL8186. but I have no idea where is on the DAP-160 PCB.

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.4 Drop Users Into Enable Mode?

Apr 11, 2013

I am trying to get users in the external identity store (AD) to be dropped directly into enable mode after being authenticated, since I don't know of a way to set an enable password for users in an external identity store. I think it has something to do with shell attributes but I'm not realy sure.
 
So here's what I tried.Linking identity group to external group and provide full command priviliges - enable still didn't work Creating duplicate users in the internal identity store and setting the password type field to AD1 - That gives me the ability to get to the enable password prompt hit enter on the blank promt then prompts for Old and new passwords but fails everytime with an Error in Authentication.

View 8 Replies View Related

Cisco :: Can ASA 5510 Be Configured As Bridge Mode

Dec 5, 2012

Can ASA 5510 be configured as bridge mode and still send Netflow info to a collector?We have a PIX connect internal network to internet. Because PIX does not support NetFlow, as a temporary solution, we were thinking of putting an ASA 5510 between the PIX and internet gateway, and configure it as a bridge so that there will be no routing issues, and the ASA can still send Netflow info to a collector.

View 13 Replies View Related

Setting Up Bridge Mode To A Satellite Receiver?

Mar 5, 2011

i want the Satellite receiver to be wireless.i have a I-Link 9000 Plus Satellite reciever which has an ethernet port , where the buffalo router will be connected. (Buffalo WHR-HP-G300N Firmware: DD-WRT v24SP2-EU-US My main router is the Linksys Wireless G router WRT54G2 V1.5.

View 2 Replies View Related

Wrt45g - How To Set Up Internet Configuration To Bridge Mode

Dec 11, 2011

How do you set up a linksys routers internet configuration type to public/bridge mode? my model is WRT45g

View 1 Replies View Related

TP-Link 3G/3.75G Router :: TL-MR3220 - How To Set Bridge Mode

Dec 25, 2012

Region : Italy
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 3.12.20 Build 120705 Rel.39030n Beta
ISP :

I'm facing problem to properly set BRIDGE mode (WDS Bridging). I had a router connected to ADSL line with following setting:

IP 192.168.1.1
Security setting - WPA2/TKIP
DHCP on

The wi-fi coverage is not good in all the floor so I'm trying to extend coverage using a TL-MR3220. I did follow the instruction in this video [url]....

View 3 Replies View Related

D-Link DAP-1522 :: Bridge Mode In Next House

Apr 13, 2011

I m setup for my brother's next house. He wants to use to share with my internet access. I do have 2wire modem provider that has wireless capability in my house. So he have DAP-1522 [bridge mode] and adjust in Wireless Setting, to use SSID manual, (Bell9**) WPA. It s successful, and works well. Problem is cannot use wired to computers, blu-ray, Xbox 360 in same time. it will disconnect frequently because in bridge mode doesn't have DHCP reserved?

My bro bought other one is DIR-655.  DAP-1522 keep in [bridge mode] to link to DIR-655 (Static IP), and setup DHCP Reserved.  He feel relief that works very well and have no problem with any computers and devices doesn't disconnect anymore. my question is why DAP-1522 doesn't have DHCP reserved when bridge mode that connected to any providers modem?

View 1 Replies View Related

Linksys Cable / DSL :: Bridge Mode On WAG120N

Apr 24, 2013

I have a WAG120N. I wish to use it as a modem only and not as a wireless router.I have another wireless router I want to use to handle network connectivity.I want the wag to be set to 10.10.1.1 and I want my router on 10.10.1.2What bridge mode do I set on my wag? Do I need a crossover cable?

View 1 Replies View Related

Linksys Cable / DSL :: WAG160n Bridge Mode Only?

Nov 30, 2011

I'v just changed my internet provider. That new one uses Annex b, my wag160n is purposed to annex a. Thats what i'v done. Turn on bridge mode turn off dhcp, set  PPPoE with my login and password. And here is my problem. I cant connect by wifi with more then 1 device. I can only connect with my laptop when i'm trying to connect on my xbox it says it cannot get ip adress from router. What shoudl i change ?

View 6 Replies View Related

D-Link DAP-1522 :: Bridge Mode - Cannot Ping DIR-615

Nov 23, 2010

I am running a DAP-1522 (v1.21) in Bridge mode with a DIR-615 (1.00VG).  I have configured the DAP-1522 to access the WiFi network and can see it connects correctly.  I have a PC connected to the DAP-1522.  Most of the time I can ping the DAP-1522 from the PC but cannot ping the DIR-615.  Occasionally when I reboot everything again I can ping the DIR-615 and get full internet access but this usually only lasts  a minute or so then it drops.  After that I can only ping the DAP-1522.  The DAP-1522 always says the Status is "connected" though.

The IP addresses are as follows:
DIR-615: 192.168.0.1
DAP-1522: 192.168.0.50 (static)
PC: 192.168.0.55 (static)

View 9 Replies View Related

D-Link DIR-655 :: Set It To Bridge Mode - Can't Remember IP / How To Connect It

Aug 22, 2010

I've got a DIR-655 set in bridge mode after a Cisco router.  It's been working great for months, but now I'd like to add a new wireless device and want to get the settings.  For the life of me, I can't remember how to access it now.The subnet is 192.168.2.XXX I've got a Mac connected through the "internet" port and a cat5 cable.  I figure I should be able to go from 192.168.2.1 through 192.168.2.254 and will eventually find it.  Is there something I'm missing?

View 7 Replies View Related

D-Link DAP-1522 :: Cannot Setup From Bridge Mode

Nov 22, 2011

I turned it on for bridging and it did not auto setup wireless so i need to turn off WPS but my wireless option page is now blank. I rebooted, reset the DAP but still no manual config option. I found I could configure it if I switched it to AP mode but still cannot setup from bridge mode. According to manual a reset does not turn off WPS so what is the answer?

View 1 Replies View Related

Cisco :: Can ASA 5510 Be Configured As Bridge Mode

Dec 4, 2012

Can ASA 5510 be configured as bridge mode and still send Netflow info to a collector? We have a PIX connect internal network to internet. Because PIX does not support NetFlow, as a temporary solution, we were thinking of putting an ASA 5510 between the PIX and internet gateway, and configure it as a bridge so that there will be no routing issues, and the ASA can still send Netflow info to a collector.

View 1 Replies View Related

Cisco Switching/Routing :: 2650 - Getting Enable Mode On Router?

Jan 14, 2012

On my 2650 Router it just has only Telnet password.It has no enable mode password set.After reboot it is goes to prompt mode BB.I am unable to go to enable mode .how can i go back to enable mode on this router?

View 13 Replies View Related

Cisco :: 5508 / Enable Mac-filtering On AP In Flex Connect Mode?

Mar 18, 2013

I had configured one access point CAP3602E in flex connect mode through a WLC 5508 after deploying the access point in flex control mode the local mac-filering is not working. before it was working when ap was in local mode. any body have to know is the mac-filtering working in flex-control mode ?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved