Some Sites Won't Load When Adsl Modem Tp-link Td 8840 Is Connected To Router Dlink Dir 61

Apr 30, 2011

i have a adsl modem tp link td 8840, and i had this up and running well for about 3 days. then we decided to get a router cause my little sis got a ipad2.the router is dlink dir basically i followed all the instructions and the internet was working fine.then for some reason ign site stopped working, i thought that it was down for some reason and didn't think much of it and today when i tryed to go into hotmail or facebook it doesn't work either. so i can get into the log in pages of both, but when i put in the id and password, the screen goes blank and just says waiting for .... on the bottom (using google chrome).and it never loads.i tryed with other internet browsers and it din't work so i took out the router and re wired the adsl modem only and voila. all the sites started working again.i want to use my router but i don't know why i can't acess some sites when i have it connected.

View 1 Replies


TP-Link ADSL2+ Wireless :: Toshiba Laptop Can't Get Connected To ADSL Modem Router TD-W8960N

Oct 12, 2012

Region : UnitedStates
Model : TD-W8960N
Hardware Version : V3
Firmware Version :

My Toshiba laptop can't get connected to the wireless ADSL modem router TD-W8960N. I have 4 different laptops and one desktop, all connected to the router very well, only the Toshiba cannot get on Internet. I can connect to the wireless network on the laptop, but it shows limited access.

View 6 Replies View Related

DLink DSL 2640R Wireless Adsl Router / Modem - Create More Network Ports Upstairs

Jan 22, 2013

At home I have a D Link DSL-2640R wireless adsl router/modem in my downstairs office.I would like to use the cable which goes to upstairs of the house to link to some sort of extra router or switch in order to provide more network ports upstairs.

View 1 Replies View Related

Wireless :: Internet Is Connected But Can Only Load Sites

Jan 7, 2011

I am having trouble with my wireless connection. I am only able to visit websites but if I try to use the internet for anything else (AIM, Yahoo instant messenger, etc), it will not work. This is not a modem issue because my other computers' connections still work fine.

Configuration Host Name . . . . . . . . . . . . : JingJunBusiness
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No


View 1 Replies View Related

Connected To Network But Cannot Load Sites In Browser

May 9, 2011

About a week ago my mom (unknowingly to me) installed a registry "booster" (Uniblue Registry Booster) and as expected, it messed some stuff up. As soon as she finished scanning and it "fixed" all her registry issues, she could no longer load webpages in her browser.PC was running XP at the time of the corruption, none of her system restore points work, and unfortunately her automatic backups had stopped running about 2 months ago without me knowing. She's been planning to switch to Windows 7 soon anyway so after a few days of trying to find a solution and not having any luck I thought "well maybe if we upgrade it will unintentionally fix some files / settings during the install." Going from XP to Windows 7 was no fun task itself, but after many hours of installs I had it upgraded to Vista and then to 7.

View 15 Replies View Related

BCM5354 Wireless Router Has No Internet Access When Connected To ADSL Modem

May 8, 2011

I own a Broadcom BCM5354-based wireless router (Tomato 1.27 flashed) and an Aztech DSL605E modem. When both are powered up, the wireless router sometimes doesn't get internet access because the modem automatically logs itself in. I have to plug the modem cable to my laptop, manually disconnect the modem, and plug the modem cable back to the router to fix it.

View 2 Replies View Related

Home Network :: Wireless DLink Modem 2730U / Share ADSL Internet As Limited?

Aug 4, 2012

I have an ADSL connection using a wireless DLink modem 2730U I want to share my internet with my neighbour as limited speed and limited traffic.How can I do this? Is it possible as wireless?

View 4 Replies View Related

TP-Link 3G/3.75G Router :: TL-MR3220 Not Detect Dlink Dwm-156 Usb Modem

Nov 22, 2012

Region : Malaysia
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 3.12.8 Build 110418 Rel.43954n
ISP : Celcom

my tl-mr3220 not detect my 3g usb modem dlink dwm-156.

View 1 Replies View Related

TP-Link TD-W8901G - Can ADSL Modem Router Be Used As Standalone

Jun 4, 2011

I'm expanding my home network and the adsl modem router supplied by my ISP has just 1 RJ-45 port and 1 usb port (and an RJ-11 for the Internet). I have zeroed in on TP-Link TD-W8901G having 4 RJ-45 ports, 1 USB port, 1 RJ-11 port and also it is a wireless router. Currently I would be connecting the above modem router to my desktop running Linux and using the same ISP with ADSL. Considering a future scenario where I may decide to use another way to connect to the Internet like maybe 3G or Cable, etc (with their separate modems) I was wondering if my same modem router (TD-W8901G) could be used as a standalone router for connecting the devices on my home network. Basically, what I want to know is whether this modem router would be able to share an Internet connection from some other source, other than the one provided through its own RJ-11 (ADSL) source?

View 1 Replies View Related

TP-Link 3G/3.75G Router :: Using TL-MR3220 As Repeater Behind ADSL Modem?

Jan 26, 2013

Region : UnitedKingdom
Model : TL-MR3220
Hardware Version : Not Clear
Firmware Version :

I am connected to the internet via a non TP=Llink ADSL2 modem/router supplied by my ISP.I was using my TL-MR3220 as a 3G modem but no longer need it for that purpose. I was wondering whether I can now use my TL-MR3220 for two other purposes: as an additional wireless access point and as a means of linking equipment (i.e. printers) to the home network . i have tried connecting the ADSL2 modem/router to the TL-MR3220 via an ethernet cable (one of the 4 LAN ports on the ADSL modem/router to the blue WAN port on the TL-MR3220) but I can get no internet connection through the TL-MR3220.Is this normal i.e. something that the TL-MR3220 is not designed to do, or am I just using the wrong settings ? I have tried a whole range of different settings but none seem to work.

View 5 Replies View Related

Cisco :: Slow DNS With Load Balancing Across 4 ADSL Link

Apr 19, 2012

I have a router Cisco 1901 with 4 links ADSL load balancing, when I activate the links 4, DNS resolution become very slow.

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: Lan Setting In ADSL Modem Router TD-W8968 Failed

Jan 2, 2013

Region : Malaysia
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP : Streamyx

In the process of Lan setting my new wireless adsl modem router TD-W8968, an error message shown when I press save. Error Code: 1, Internal error.

View 2 Replies View Related

Cisco WAN :: 1901 - Slow DNS With Load Balancing Across 4 ADSL Link

Apr 18, 2012

I have a router Cisco 1901 with 4 links ADSL load balancing, when I activate the links 4, DNS resolution become very slow.
below the router configuration:
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption


View 1 Replies View Related

Cisco Switching/Routing :: 1700 ADSL Router - Connecting 2 Sites Together

Jan 23, 2012

We currently have a main network running through a static broadband connecting using a Cisco 1700 ADSL router, everything is working fine locally.

We are looking to rent some space in an office nearby so im going to order another business adsl connection with static IP for this site and i currently have a spare 1800 router.My question is can the cisco routers connect up like a VPN connection so both sites work together and will the connection remain online constantly so from the remote office we can access all our servers from the main network?

Also how does the IP addressing work on 2 sites. The main network uses 10.120.21.x and DHCP is assigned from a cisco router. Does the remote network assign from the same DHCP server or would the remote sites cisco router need to be setup to give out DHCP to local machines. If so what would be the best IP setup to use.

View 9 Replies View Related

New D-Link Modem / Router Connected But No Internet Access?

May 19, 2011

My desktop recently broke so i bought my first laptop. I have AT&T DSL and i bought a new D-Link DSL-2640B modem/router so i could have wireless internet. I installed it and i was able to use it with the ethernet cable, however when i tried to use wifi, it worked for only about 2 minutes before it disconnected.. Now when i try again it says that it is connected (full 5 bars) but it also says there is no internet access and i cannot use the internet.

Also, before, with the old modem i was able to just connect the ethernet cable to the laptop and just start using the internet. Now i have to connect by putting in my username and password provided by my ISP almost like if it was dial up. I don't know why i have to do this now but not before.

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz, Intel64 Family 6 Model


View 4 Replies View Related

D-link Dir-615 :: Config Adsl Modem Via Wifi?

Jan 26, 2012

I use D-Link DIR-615. I can't connect to config page I need to access ADSL modem config page. Asus RT-N12 can configADSL modem via Wi-Fi.

View 1 Replies View Related

W8951ND - Use Basic ADSL And TP-Link Modem Together?

Mar 28, 2013

I have a TP-LINK TD W8951ND wireless Modem+Router which contains one RJ11 (phone line) port and four RJ45 (Ethernet) ports along with wireless N support.

Now for some reason, my TP-LINK modem doesn't work with my ISP, whereas the modem provided by my ISP works. If I wish I could get the basic modem provided by my ISP which contains one RJ11 port and one Ethernet port.

So can I link both the modems? I mean will this configuration work: Connect telephone cable to basic modem provided by ISP. And then connect the Ethernet port of basic modem to the Ethernet port of TP-link modem. And then connect remaining Ethernet ports to PC and laptop and simultaneously use WIFI.

Will it work or should I have to replace my TP-Link Modem+Router?

View 1 Replies View Related

Setting Load Balance In DLink LB-604 Router

Nov 1, 2011

We have a Dlink Lb 604 router. We have two wan connections. Connection 1 has a speed up to 8 Mbps.Connection 2 has a speed of 1Mbps.We set the load balance to 50-50. When we tested the speed with two lines it is showing 1 Mbps only.When working with connection 1 we are getting speed upto 6 Mbps.

View 1 Replies View Related

Linksys Wireless Router :: E1000 - Unable To Load Certain Https Sites?

Oct 12, 2012

This problem just started. I am unable to load certain https sites (for work). If i directly connect to ethernet, it works, so my isp isnt my problem. When i try to connect to the sites, it says "sending request" then times out. I have played around with the settings non stop and nothing has worked. I have a mac running 10.7.5.

View 3 Replies View Related

TP-Link 300Mbps Wireless :: Connect TL-WR841N To ZTE ZXDSL 831 Adsl Modem?

Apr 27, 2013

Region : India
Model : TL-WR841N
Hardware Version : V8
Firmware Version :
ISP : Reliance

I got a new broad band connection , its with an ADSL modem (ZTE ZXDSL 831). Now i want to plug in my TL-WR841N to use my WiFi and to connect to my second machine!! no matter what setup i try, i'm unable to connect

View 1 Replies View Related

Protocols / Routing :: TPLink TP-8840 Router Led Blinking And No Internet

Jan 13, 2013

I had this problem for 3 months now, at random times I get no connection and the LAN led 1 in my router (which I am connected to) just keep blinking very fast, ADSL and ACT leds are just on. I tried to troubleshoot the problem and it detected 2 problems: "default gateway is not available" and "local area connection doesn't have a valid IP". even when it says that it is fixed, seconds later the problem is still there (sometimes it gives me one problem only). I tried many solution on the forum including reseting the router, disabling the laptop's wireless modem (I'm on a laptop) and even trying ipconfig/release - ipconfig/renew. everything is up to date and I update my antivirus (and it has auto update enabled). here are my specs:

Broadband connection: DSL
Router Make/Model: TP-LINK TP-8840
Anti-virus: Avira free anti-virus
ipconfig data:


View 19 Replies View Related

TP-Link ADSL2+ Wireless :: TD-VG3631 - Modem Crashes Under Torrent Load?

Dec 28, 2012

Region : Australia
Model : TD-VG3631
Hardware Version : V1
Firmware Version : TD-VG3631v1_0.6.0_1.0_up(121214)

I've noticed the modem becomes unresponsive under use with torrents and only thing that works is to turn it off & on from power button then works for a few more minutes then crashes again on the latest firmware.

View 8 Replies View Related

TP-Link ADSL2+ Wireless :: TD-VG3631 - Modem Crashes Under Torrent Load?

Dec 27, 2012

Region : Australia
Model : TD-VG3631
Hardware Version : V1
Firmware Version : TD-VG3631v1_0.6.0_1.0_up(121214)

I've noticed the modem becomes unresponsive under use with torrents and only thing that works is to turn it off & on from power button then works for a few more minutes then crashes again on the latest firmware.

View 1 Replies View Related

Certain Sites On Desktop Will Not Load

Oct 26, 2012

Certain sites on my desktop will not load. These sites include, twitter, ect. Youtube opens, but videos don't play. However some work fine, such as reddit.However, my connection is fine on my laptop. My laptop is wireless and my desktop is wireless.I recently got my desktop back from repairs, and it has a new motherboard, with a clean instal of windows vista. I installed all the drivers ect. It says im connected to the internet, and I can access some sites. I've flushed the DNS, and called my provider. They say nothing is wrong on their end.Oh, and after ringing the repair shop, they said to install adobe and java. Java installed fine, but the adobe site wouldn't load (lol). So I copied the adobe files from my laptop over to the desktop. Youtube videos now play, but it feels slow, considering im on a 30MB download connection.

View 3 Replies View Related

Can't Load Some Sites On Chrome

Dec 18, 2011

I have a problem on my Google Chrome explorer that if for example I am going to [URL] so every time I am clicking in a link (no matter what... some friend's profile, or friend's pictures...) I see only the blue Facebook bar on top and that it. So if I want to page to load perfectly I need to mark the address and click enter, and then the page loads perfectly.

An I need to do this any time I am entering any link. And it's not only on this site. it's also some others sites includes Twitter.

I tried to see if the problem continues in other explorer like firefox and IE, but not... it works perfectly there!

View 3 Replies View Related

DLink WBR-2310 Router Don't See Modem But Switch Does

May 24, 2012

We setup a home network in our new house but we have a problem with limited connectivity in specific configuration.

There is few situations to describe the problem :

1. If I connect my computer directly to the modem I can access to the internet. (modem --> computer = internet OK)

2. If i connect the ethernet cable (in the wall) between my modem and RJ45 jack in the living room and connect my computer directly to the RJ45 I can access to the internet. (modem --> cat6 cable in the wall --> computer = internet ok)

3. If I connect my router directly (without the cat6 cable in the wall) to the modem and my computer to the the router I can access to the internet. (modem --> router --> computer = internet ok)

4. If i connect the ethernet cable (in the wall) between my modem and RJ45 jack in the living room and connect to router to the RJ45 and my computer to the router I CANNOT access to the internet. (modem --> cat6 cable in the wall --> router --> computer = internet access problem)

5. If i connect the ethernet cable (in the wall) between my modem and RJ45 jack in the living room and connect to a swith to the RJ45 and my computer to the switch I can access to the internet. (modem --> cat6 cable in the wall --> switch --> computer = internet OK)

With those tests I am not able to figured out what is the problem... router is working in situation #3. cable in the wall is ok in situations #2 and 5. How to make my router working when connected to the RJ45 jack in the living room.

There is my component :
Router --> D-Link WBR-2310
Switch --> Trendnet TE100-S5
Modem --> Thomson DCM475
Cable in the wall --> Homemade with 568A standard in both end.

View 5 Replies View Related

Unable To Load Certain Internet Sites?

Jan 14, 2011

I have today the issue that I am unable to load certain websites, I can enter but whenever I click on continue to navigate in that same site for example FACEBOOK, I see the operation just loads and dont go anywhere, after that remains in same condition unless I cancel or close the browser.I checked the firewall, and also the antivirus, but nothing seems wrong, I can get in into HOTMAIL, GOOGLE, but again certain sites if I search something on GOOGLE, get frozen again .

View 1 Replies View Related

Networking Via Adsl Modem / Router

Oct 9, 2012

I want to transfer files between two computers.i have a Router+Adsl modem i want to network two pc one is running windows xp and other is running windows 7.i plug both pc's cable in Router and LAN card...after that my network places shows below picture i didn't configure anything. url...when i click other network pc it ask me user name and password. url...I never did networking. how can i transfer files between two pc's while internet don't stop.

View 2 Replies View Related

Cable Modem To DLink Router Can't Find IP Address

May 2, 2011

we were happily getting along with our RCN cable Motorola modem and DLink wireless 655 until the last couple of weeks. The internet would intermittently not be available, without warning. First couple of times we power cycled the modem and router, and it worked, but then stopped being available altogether. I got some support from RCN, the cable provider (they own the modem and it's old, so naturally that was my first thought). I now have a new modem and the situation is exactly the same. The error message that I get is that the IP address for the network cannot be found.

I got internet access by bypassing the router, connecting the modem directly to my (Windows XP) PC, releasing and renewing the IP address, and power cycling the modem. However, the internet still intermittently shuts down, and of course turning off the computer necessitates the whole procedure again. And now we have no wireless. Should we assume it's the router, and a new one would solve our problem? Of do we just need to reset the IP address of the router?

View 1 Replies View Related

How To Configure Dlink Modem Router With Cable Internet

Jun 30, 2011

have wireless d-link adsl modem router which usually use for adsl connection sharing, but i have a cable internet connection, so my question is can i share my cable internet connection with this router?

View 1 Replies View Related

Dlink Dsl-520b Dls Modem And Wireless Router On Different Networks?

May 12, 2012

my dlink dsl-520b dls modem is using and is plugged into the WAN port on my dlink wireless router.the wireless router is (these are both in the main building which is remote from my shop).Then i have a netgear wireless access point This spreads the signal properly, and I can get connectivity on all my computers -although i do have to specify a default route on the computers on my shop side of the access point.I noticed that the internet light on my modem is red which indicates no internet connection. I am still able to access the internet fine, but i would like to be able to log into the modem from my network. I was able to do this before by setting a computer with a netmask of

View 6 Replies View Related

DGN2200 - Connecting Netgear Modem With DLink Router?

Dec 24, 2011

how can i connect a Net gear DGN2200 wireless modem router to a D link DGL4500 wireless router ??

View 1 Replies View Related

DLink N750 Router Fails To Detect Modem

Feb 13, 2013

I've had a D-link N750 DB running smoothly for about a year now. Suddenly the other day, for no apparent reason, it dropped its connection to the modem and refuses to acknowledge it anymore. The router still broadcasts the network ESSID and accepts external connections.

First, the cable modem appears to work just fine, as I'm able to hard wire with a laptop and get consistent internet service. Second, when in the router settings, the ethernet connection status reads not detected, so it seems to me that the router hardware has no idea its got anything plugged into it.

I've tried the standard power cycling methods in various orders about a dozen times. I've replaced cables and done a hard reset of router settings. No dice.

View 8 Replies View Related

Copyrights 2005-15, All rights reserved