Cable Modem To DLink Router Can't Find IP Address
May 2, 2011
we were happily getting along with our RCN cable Motorola modem and DLink wireless 655 until the last couple of weeks. The internet would intermittently not be available, without warning. First couple of times we power cycled the modem and router, and it worked, but then stopped being available altogether. I got some support from RCN, the cable provider (they own the modem and it's old, so naturally that was my first thought). I now have a new modem and the situation is exactly the same. The error message that I get is that the IP address for the network cannot be found.
I got internet access by bypassing the router, connecting the modem directly to my (Windows XP) PC, releasing and renewing the IP address, and power cycling the modem. However, the internet still intermittently shuts down, and of course turning off the computer necessitates the whole procedure again. And now we have no wireless. Should we assume it's the router, and a new one would solve our problem? Of do we just need to reset the IP address of the router?
View 1 Replies
ADVERTISEMENT
Jun 30, 2011
have wireless d-link adsl modem router which usually use for adsl connection sharing, but i have a cable internet connection, so my question is can i share my cable internet connection with this router?
View 1 Replies
View Related
Jun 13, 2012
I have cable and am using an sb5101 modem and an wndr3700 v2 router. I have tried changing the router mac address with no luck. Also the ip address is dynamic not static verified by bigpond.how to change my ip address.
View 3 Replies
View Related
Apr 9, 2013
Reset to factory defaults. DHCP turned on. Status page shows black for router IP, gateway, and DNS addresses. Powered router+cable modem on/off multiple times already. I also have another wifi router (WRT120N) and it works fine.
Pretty simple connection. Just a ethernet cable between the cable modem and E1200 internet port (Cable modem <---> E1200)
View 2 Replies
View Related
Sep 26, 2012
Attempting to get EA6500 working with TWC Motorola Surfboard SBV5220 modem, which has been working just fine for the last 2 years with a Linksys E3000 router. DHCP client in the EA6500 either doesn't ask for an IP address from the cable modem or the modem just isn't supplying one. With the E3000, you could see the IP address assigned by the cable modem and the primary and secondary DNS server addresses provided, and if the DHCP request didn't work, these addresses would be all zeroes. But, with the EA6500, I can't find an equivalent screen that shows these assignments, or zeroes when the DHCP request fails.
View 1 Replies
View Related
Nov 6, 2011
we just switched over to time warner. We need the IP address to set up our surveillance cameras. Is there any way to get that online?
View 2 Replies
View Related
Oct 28, 2011
I am having 5 IP addresses assigned to me. I have one commercial/business modem/gateway/router. If I want to have the advantage of separate lines (go with this for now) how else can the gateway do it other than simply passing the IP directly through, no router function, basically a modem/switch, everything else not there.
View 4 Replies
View Related
Sep 6, 2012
I have a D-Link Router and I need to find the WEP number. How do I find it on my Router?
View 1 Replies
View Related
Aug 22, 2012
Have D-link N150 wireless router as access point working with D-link DLG4100 wired router Forgot password for N150. How to find or reset it?
View 1 Replies
View Related
Jan 12, 2012
there could be complications, but it appears the WPM300N is 'bad'?my wife's computer (XP SP3) recently started freezing at random times. Once while surfing she got a BSOD. The last few days it had gotten much worse, sometimes the freeze occuring during the boot process, and again at random points.
What I tried was determing all new s/w installs and deleting them still didn't fix the problem. Next I used some Norton Ghost back-ups restoration from the time period she had the freezes... still was freezing. Next an image from long ago and it still froze. Got me thinking it was h/w related. She has a wireless mouse and keyboard. Put in wired units, still froze.
A few days ago my router died. It couldn't get a WAN IP Address from the ISP's cable modem. ISP verified the modem was working by having me attach directly to it one of my wired computers. This router was a new (2 months old) ASUS RT-N56U. I put back my old LinkSys WRT600N. In doing so I had to change the passphrase. This turned out to be a big assist to me determining what went wrong.
On each of the restores of an image, the system never froze, not until I connected to the router by giving the proper passphrase, but usually after that. When it happened (I did multiple image restores) when I was in Safe Mode with Network as it was connecting, the implication was clear it was the WMP300N.
As luck would have it, I had another card taken out of my old computer. Put that card in and so far, he computer has NOT frozen up. I've restored all the deleted items and Windows Updates and all other Updates (Norton ISS, Flash, Adobe) and it is running fine.
View 4 Replies
View Related
Jun 9, 2011
I'm on a Virgin media 50 Meg connection currently connected via cable using the modem provided.I'm hoping to connect my PS3 to the internet using the router provided (dlink DIR-615) and I'm wondering if I'll still get the same speeds if I connect the cable through the router. I hear that the wireless data transfer won't be able to handle 50 Meg but if I attach a cable from the router to my PC will I still get the full 50?
View 1 Replies
View Related
May 24, 2012
We setup a home network in our new house but we have a problem with limited connectivity in specific configuration.
There is few situations to describe the problem :
1. If I connect my computer directly to the modem I can access to the internet. (modem --> computer = internet OK)
2. If i connect the ethernet cable (in the wall) between my modem and RJ45 jack in the living room and connect my computer directly to the RJ45 I can access to the internet. (modem --> cat6 cable in the wall --> computer = internet ok)
3. If I connect my router directly (without the cat6 cable in the wall) to the modem and my computer to the the router I can access to the internet. (modem --> router --> computer = internet ok)
4. If i connect the ethernet cable (in the wall) between my modem and RJ45 jack in the living room and connect to router to the RJ45 and my computer to the router I CANNOT access to the internet. (modem --> cat6 cable in the wall --> router --> computer = internet access problem)
5. If i connect the ethernet cable (in the wall) between my modem and RJ45 jack in the living room and connect to a swith to the RJ45 and my computer to the switch I can access to the internet. (modem --> cat6 cable in the wall --> switch --> computer = internet OK)
With those tests I am not able to figured out what is the problem... router is working in situation #3. cable in the wall is ok in situations #2 and 5. How to make my router working when connected to the RJ45 jack in the living room.
There is my component :
Router --> D-Link WBR-2310
Switch --> Trendnet TE100-S5
Modem --> Thomson DCM475
Cable in the wall --> Homemade with 568A standard in both end.
View 5 Replies
View Related
Dec 28, 2011
I am trying to get my wife's mac book to print wireless to my hp desk jet 3050a 611g printer. The print report advises that the Mac hardware address of the printer must be added to the list of permitted devices for my wireless routed.
View 1 Replies
View Related
Feb 25, 2011
I need to change the ip address on my router same ip address as myDlink router?
View 6 Replies
View Related
May 12, 2012
my dlink dsl-520b dls modem is using 192.168.1.1 and is plugged into the WAN port on my dlink wireless router.the wireless router is 192.168.0.1. (these are both in the main building which is remote from my shop).Then i have a netgear wireless access point This spreads the signal properly, and I can get connectivity on all my computers -although i do have to specify a default route on the computers on my shop side of the access point.I noticed that the internet light on my modem is red which indicates no internet connection. I am still able to access the internet fine, but i would like to be able to log into the modem from my network. I was able to do this before by setting a computer with a netmask of 255.255.0.0.
View 6 Replies
View Related
Dec 24, 2011
how can i connect a Net gear DGN2200 wireless modem router to a D link DGL4500 wireless router ??
View 1 Replies
View Related
Feb 13, 2013
I've had a D-link N750 DB running smoothly for about a year now. Suddenly the other day, for no apparent reason, it dropped its connection to the modem and refuses to acknowledge it anymore. The router still broadcasts the network ESSID and accepts external connections.
First, the cable modem appears to work just fine, as I'm able to hard wire with a laptop and get consistent internet service. Second, when in the router settings, the ethernet connection status reads not detected, so it seems to me that the router hardware has no idea its got anything plugged into it.
I've tried the standard power cycling methods in various orders about a dozen times. I've replaced cables and done a hard reset of router settings. No dice.
View 8 Replies
View Related
Nov 22, 2012
Region : Malaysia
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 3.12.8 Build 110418 Rel.43954n
ISP : Celcom
my tl-mr3220 not detect my 3g usb modem dlink dwm-156.
View 1 Replies
View Related
Nov 30, 2011
I use a DLink DIR-655 router but it only allows around 24 MAC addresses to be specified in the filter list of ALLOWED MAC ADDRs. With a few laptops in the family, a game box, NAS, printer, e-readers, smart phones, I'm maxed out. Alternatively, could I daisy chain them to have one handle wireless devices only and another handle wired devices? If so, I could probably dealt with 24 max wireless MAC addresses specified for a while. If there's a better router out there that's not so limited, I'll upgrade.
View 2 Replies
View Related
Jun 18, 2011
We are using a Westell 7500 wireless modem/router from Frontier without any problemsI have two d-link wireless n300 routers that I want to add to network so I can add them to our DirecTV DVR's. I have tried using the D-link CD and instructions without any success. Everytime it prompts me for my 1st router's (the Westell's) login/password, it says it's invalid. If I then click to continue w/o the logon and password, it then gives me an error when it is trying to add the d-link. I have tried everything. My Westell IP is 192.168.1.1. How can I access and add the d-link routers? Is there an easier way?
View 16 Replies
View Related
Nov 13, 2011
i have internet connection which is connect using dynamic ip address but if i add ip address in Local Area Connection i get two networks, one is internet dynamic ip & other one is ip which i setup in Local area connection. so if i select LAN network for lan clients i can access lan. but now i have DLINK DIR 615 router so what should be my settings?
View 3 Replies
View Related
Apr 30, 2011
i have a adsl modem tp link td 8840, and i had this up and running well for about 3 days. then we decided to get a router cause my little sis got a ipad2.the router is dlink dir 61.so basically i followed all the instructions and the internet was working fine.then for some reason ign site stopped working, i thought that it was down for some reason and didn't think much of it and today when i tryed to go into hotmail or facebook it doesn't work either. so i can get into the log in pages of both, but when i put in the id and password, the screen goes blank and just says waiting for .... on the bottom (using google chrome).and it never loads.i tryed with other internet browsers and it din't work so i took out the router and re wired the adsl modem only and voila. all the sites started working again.i want to use my router but i don't know why i can't acess some sites when i have it connected.
View 1 Replies
View Related
Mar 23, 2012
I can't get a new IP from my ISP when my Cable modem router(EPC3925) is set to router mode, i have tried factory restore, unplugged etc..but still no luck. It changes each time i reset it when i set it to bridged only mode but then i won't be able to connect other devices to it since it doesn't uses DHCP in bridged only mode. It changes back to the IP i had when i set it to router mode. I don't want to change my router settings to bridged only because it would disconnect the other devices in my house. Why my ISP assigns the same IP address when it's set to router mode but assigns different IPs when it's set to bridged only, how is this possible ?
View 1 Replies
View Related
Feb 7, 2012
I have a cable modem installed to my property but want to use my modem/router to go wireless. The proble is my cable modem output is a RJ45 and the router input is RJ11.
View 10 Replies
View Related
Jan 22, 2013
At home I have a D Link DSL-2640R wireless adsl router/modem in my downstairs office.I would like to use the cable which goes to upstairs of the house to link to some sort of extra router or switch in order to provide more network ports upstairs.
View 1 Replies
View Related
Jan 6, 2013
I'm switching to cable internet service instead of DSL. My Netgear router will not work with my cable modem; but it works like a charm with my DSL modem. Is it a problem with the router setup? Good thing I still have the DSL service.
View 3 Replies
View Related
May 4, 2012
Where do I find the security key for this DIR-827 dlink
View 2 Replies
View Related
Jun 10, 2011
How do I find the security codes to enable me to connect to the internet wireless
View 2 Replies
View Related
Aug 10, 2011
I have my pc hooked up to my dlink router.. I want hook a laptop up but, i do not remember the password etc to hook it up.
View 1 Replies
View Related
May 8, 2011
I have two computers linked to our d link wireless computer, i am trying to connectmy childs computer but it dosnt even come up as a available connectionThe wireless button is on, why it dosnt come upas an available connection
View 1 Replies
View Related
Oct 3, 2011
I have a wireless modem on the first floor of my house, where I got cables through the wall running throughout rooms in first floor, ground floor and basement.I have my small business at the basement, so I have 2 PCs one printer and one external hard disc which also connects directly to a modem/router.I have 3 PCs from the first and ground floor that connect through the wall to my modem, and everything works well. But for my basement, which only has 1 lan cable output on the wall, I got myself a router so that I can connect all my devices.I connect the router with my modem, and then the PCs, printer and hard disc on the router. The PCs have internet access, so I know the connection to the modem has nothing wrong to it. But I am not able to access the PCs connected to the router from the PCs connected to the modem, or vice versa.
I was told to not obtain an IP address automatically, so I assigned my modem and router to work on 192.168.10.x and gave my PCs IPs such as 192.168.10.19 Only after setting this up did all my PCs have internet access, but again, no network communication between PCs on modem and PCs on router.One thing that might be worth mentioning, is that through time, my network keeps going from Home Network: Network, to Network 2, Network 3, and so on... now it's on Network 5. I have no clue why this happens, and if it's related to my problem
View 2 Replies
View Related
May 23, 2011
how do i find my routers ip?
View 2 Replies
View Related
Mar 19, 2011
I have wrongly entered a ip address while port forwarding... and my router seems to not be responding.Meaning whenever I put the Default gateway numbers ,my router does not open.
View 1 Replies
View Related
