Change The Ip Address On Router Same Ip Address As Dlink Router?

Feb 25, 2011

I need to change the ip address on my router same ip address as myDlink router?

View 6 Replies


ADVERTISEMENT

Add Mac Hardware Address To Dlink Router?

Dec 28, 2011

I am trying to get my wife's mac book to print wireless to my hp desk jet 3050a 611g printer. The print report advises that the Mac hardware address of the printer must be added to the list of permitted devices for my wireless routed.

View 1 Replies View Related

DLink DIR-655 Router Maxed Out On Allowed MAC Address?

Nov 30, 2011

I use a DLink DIR-655 router but it only allows around 24 MAC addresses to be specified in the filter list of ALLOWED MAC ADDRs. With a few laptops in the family, a game box, NAS, printer, e-readers, smart phones, I'm maxed out. Alternatively, could I daisy chain them to have one handle wireless devices only and another handle wired devices? If so, I could probably dealt with 24 max wireless MAC addresses specified for a while. If there's a better router out there that's not so limited, I'll upgrade.

View 2 Replies View Related

Cable Modem To DLink Router Can't Find IP Address

May 2, 2011

we were happily getting along with our RCN cable Motorola modem and DLink wireless 655 until the last couple of weeks. The internet would intermittently not be available, without warning. First couple of times we power cycled the modem and router, and it worked, but then stopped being available altogether. I got some support from RCN, the cable provider (they own the modem and it's old, so naturally that was my first thought). I now have a new modem and the situation is exactly the same. The error message that I get is that the IP address for the network cannot be found.

I got internet access by bypassing the router, connecting the modem directly to my (Windows XP) PC, releasing and renewing the IP address, and power cycling the modem. However, the internet still intermittently shuts down, and of course turning off the computer necessitates the whole procedure again. And now we have no wireless. Should we assume it's the router, and a new one would solve our problem? Of do we just need to reset the IP address of the router?

View 1 Replies View Related

DLINK DIR 615 Router Settings - Internet Connect Using Dynamic IP Address

Nov 13, 2011

i have internet connection which is connect using dynamic ip address but if i add ip address in Local Area Connection i get two networks, one is internet dynamic ip & other one is ip which i setup in Local area connection. so if i select LAN network for lan clients i can access lan. but now i have DLINK DIR 615 router so what should be my settings?

View 3 Replies View Related

Way To Change Router's LAN MAC Address

Oct 11, 2011

I have a TP-Link device TL-WR340G Wifi Device. I connect a PC through one of the LAN ports.Mow my WiFi router's MAC address has not been registered at my ISP system. I need to find a way to 'change' my Routers MAC address to another MAC address. The cloning doesn't work. I need to change my Router's LAN MAC address.

View 6 Replies View Related

How To Change Ip Address Of Router

Jul 24, 2012

i always get ban i czero due to high ping is there any way i can change my ip address so i can get in server again

View 8 Replies View Related

How To Change New Router's Mac Address

Mar 9, 2013

I have bought a new belkin router since my old ITI router had some problems and it died. My ISP used to check my old router's mac address to authorize me to use the internet but since i have changed my router i cant access the net from home anymoreBefore i used to change the mac address of my laptop to be same as that of router to be able to access the net. How to change my new belkin router's mac address to the old ITI router's mac which i have saved in my laptop.

View 13 Replies View Related

Change My Router Address At Home?

Nov 21, 2011

I need to connect to my work PC remotely through VPN, but the address of my home router (Verizon Fios) conflicts with my work address. IT guy at work is clueless, so I am stuck - been trying with him for months and this is his solution. I need to change my address on my personal router, Westell brand, but I am having no luck. I have been told to use:

ID: admin

password: password

When I tried that, each time I press a key in the password field, it enter 4 characters... I have never seen anything like that. Honestly, I'm a graphic designer and am also clueless on networking issues.

View 2 Replies View Related

IP Address Doesn't Change With Router?

Apr 8, 2011

How come my IP address does not change when i'm using my router.... (TP-link WR340G)But when i connect my DSL directly to my computer it my IP can be changed..... and when i put back my router my IP address is the same.

View 1 Replies View Related

Change Router Setup So Tablet Can Find IP Address?

Apr 27, 2012

Le Pan 2 tablet keeps trying to "obtain IP address." I have a dlink 655 router. I've removed the password from the router. Rarely will the tablet connect.

View 1 Replies View Related

Linksys Wireless Router :: WRT160N V3 - Way To Change IP Address

Feb 14, 2012

How do I change the IP address on the router?

View 1 Replies View Related

Thomson St-330 Modem - How To Change Global IP Address Without Restarting Router

Dec 4, 2012

I used to have a Thomson st-330 USB modem for my ADSL network. When I wanted to change my IP i just disconnected and reconnected a dial up connection that does the job instantly! (a wan miniport + a batch file to disconnect/recoannect with my password and username)Few days ago i bought a new modem/router (TP-LINK TS-W8951NS)Before that all I knew was that if I wanna change the ip address (if I have a router) was a batch file with commands ipconfig /release/renew.I now know that this changes the ip of my PC not the global IP! So how would I change it without restarting the router? (When i change something in my router interface page (PVC1.2.3....etc) my IP changed instantlybut how do I do this without accessing the router, like commands and a batch file etc? I just found out that my global IP changed on its own after like 30-60 min :S why is that! and to do so manually???

View 2 Replies View Related

Linksys Wireless Router :: Change Default IP Address On E3500 To 10.0.0.xx?

Jan 21, 2013

since my network (static ip, cameras, and other boxes) is set up using 10.0.0.xx.   How do I change the default ip address on the Linksys e3500 wifi router to 10.0.0.xx?

View 2 Replies View Related

Linksys Wireless Router :: EA3500 - Change IP Address Of PC Connected?

Jan 12, 2013

I have a PC with Windows 7 connected wirelessly to a EA3500 router. How do I change the IP address on my PC ?

View 6 Replies View Related

Linksys Wireless Router :: EA4500 Cannot Change To New Public IP Address

Jun 23, 2012

I have noticed that after the new Firmware Update, the EA4500 will not change to a new public address.  I have check my logs and my IP Address is the same going back to a 03/25/2012.  I changed my router back to my old E4200V1 and it changes to a new addresses when the old one expires.

View 3 Replies View Related

Sb5101 Modem / Wndr3700 V2 Router - Change Bigpond IP Address (cable)?

Jun 13, 2012

I have cable and am using an sb5101 modem and an wndr3700 v2 router. I have tried changing the router mac address with no luck. Also the ip address is dynamic not static verified by bigpond.how to change my ip address.

View 3 Replies View Related

Linksys Wireless Router :: Change WRT320N IP Address To Use It As An Access Point?

Oct 9, 2011

When I change my WRT320N routers IP address to use it as an access point only and bring it in the IP range of my ccombined modem/router I'm not able to view the setup page via the new IP address. I have tried to change the IP from the default 192.168.1.1 to 192.168.178.2. After changing and applying the changes I restarted the router and tried to access the router via the new address. This was not possible am I doing something wrong or did I forgot something?

View 8 Replies View Related

Linksys Wireless Router :: E2000 WAN IP Address Cannot Be Same Subnet As Guest Network IP Address

Jul 16, 2011

I switched from Time Capsule with AirPort to E2000 and have a problem with configuration.I use the same IPs as in AirPort and E2000 gives me an error:"The WAN IP address cannot be the same subnet as the Guest Network IP address" and I can't save configuration.But in my opinion they are different.I use "Static IP" option and I have IPs from my ISP: [code] So WAN IP is different subnet as LAN and I don't know what to do now. It worked with these settings in AirPort and here I can't proceed.

View 2 Replies View Related

Linksys Wired Router :: RVL200 / RVS4000 Possible To Assign Public IP Address As Local IP Address?

Feb 28, 2011

Is it possible to assign public IP address as Router's local IP address (RVL200, RVS4000)?

View 1 Replies View Related

Linksys Wired Router :: WRT54GS V5.1 MAC Address Appears With IP Address

Jul 3, 2011

I have a Linksys WRT54GS v5.1 router running firmware 1.52.5.I am trying to use Linksys IP Phones SPA942, but these do not seem to be able to log on and just show "Initializing network" even though the MAC address appears in the router with an IP address.The strange thing is that I already have 4 SPA941 phones that work with no problem and just log on to the network.Is there something about the SPA942 that I need to configure differently, I have factory reset it with sucess, but still unable to log on to the network.

View 1 Replies View Related

DSL-320B No IP Address Given To Router Until After Cloning MAC Address From Another Computer

Jun 1, 2012

We have an ADSL connection and use a D-Link DSL-320B modem. We have a D-Link DIR-120 router connected to this modem. This has worked perfectly fine up until today when we disconnected the router and connected a computer (call it A) directly to the modem because it was getting an unusable connection through the router for some reason. We later also performed a factory reset on the DIR-120 router.

Unfortunately, after the above steps the router did not receive any IP address (through DHCP) from the ADSL connection anymore. During my attempts to debug this I noticed that my laptop (call it B) didn't get any IP address either (when connected directly to the modem). I noticed the following syslog entries repeating over and over while trying to connect: [code]

At this point computer A could still get a connection just fine tho (when connected directly to the modem).

I then tried to change the MAC address of the router to an arbitrary one (a copy of computer B's MAC address but with the last digit increased by one). The router still did not get assigned any IP address. Finally I tried making the router clone the MAC address of a third computer (call it C). C has never been connected directly to the modem. Doing this worked. After cloning the MAC address of computer C the router is immediately assigned an IP address and the internet connection works as it did prior to all this.

Now, my question is, why would computer B and the original MAC address of the router not be able to get an IP address while two other computers worked just fine? Why would changing to an arbitrary MAC address not work while cloning the MAC address of another computer did? Could the router's MAC address have been blocked by the ISP for some reason (and what could cause this)?

but my situation seems more like a blacklisting of some MAC addresses rather then allowing just a single MAC address.

View 1 Replies View Related

Cisco WAN :: IOS 12.4 Router / Can Only Allow An IP Address On A Specific MAC Address

Apr 26, 2011

On my cisco IOS 12.4 router,Can i make it so only lets say mac address 11:22:33:44:55:66 able to use ip address 10.10.10.2?I want this so that only this IP can configure servers, and so if the computer using it is turned off, any other device cannot use the IP address.

View 6 Replies View Related

How To Reset Dlink Dp-301p Print Server Ip Address

Mar 19, 2012

i don't know the ip address of my DP-301p+ print server. how can i reset it to default ip address

View 1 Replies View Related

Change Security Settings On DLink Wireless Router?

Jan 16, 2012

how to change security settings so my kids can go online on their nintendo ds lite. we have d link router. 192.168.0.1

View 1 Replies View Related

DLink N150 Router - How To Find Or Change Wireless Security Key

Aug 22, 2012

Have D-link N150 wireless router as access point working with D-link DLG4100 wired router Forgot password for N150. How to find or reset it?

View 1 Replies View Related

How To Change IP Address

Jan 17, 2013

How exactly do you change your IP Address?

View 8 Replies View Related

Way To Change Ip Address

Sep 9, 2011

I'm wondering is there a way that i could actually change the IP address of a computer based on its MAC Address that is connected to a network via switch only ? By running some bat file ? I only manage to change a target computer ip,dns,subnet via running the bat file on the physical computer but not through a network with switch.

View 11 Replies View Related

To Change The Ip Address

Sep 6, 2011

My IP address was stolen. Someone sent me a file that I was expecting. It had a very misconcieving title. I opened it and it wouldn't work, but I let it slide. A week or two later I found pictures of myself on a forum from a hacker. The file I had opened had been a virus that hacked into my webcam. This creep told me that this had spread to 1000+ people and they all had my IP address. I am so scared! If everyone has my IP address anything could happen. How do I change my IP address without it messing up other settings in my computer and how do I remove this virus from my computer?

View 3 Replies View Related

Change MAC Address On Windows 7?

Dec 30, 2012

I tried using mac changing programs and tried to change it from the registry but none of the methods worked for me.

View 3 Replies View Related

How To Change Routing Address 192.168.1.1 To 192.168.0.1

Jun 21, 2012

How to change my routing address 192.168.1.1 to 192.168.0.1?

View 1 Replies View Related

How To Change IP Address For Browsing

Jun 20, 2012

I'd like to register another account in a forum to comment anonymously so I need a different IP address for browsing.I remember that I had been trying this long time before but it was not easy to make it. Using proxy website is useless because the speed is very very slow. Is there any way to painlessly, easily change IP to browse websites?

View 4 Replies View Related

Change IP Address In Windows 7?

Dec 10, 2011

How to change IP address in windows 7

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved