How come my IP address does not change when i'm using my router.... (TP-link WR340G)But when i connect my DSL directly to my computer it my IP can be changed..... and when i put back my router my IP address is the same.
View 1 RepliesI need to change the ip address on my router same ip address as myDlink router?
View 6 Replies View RelatedI have a TP-Link device TL-WR340G Wifi Device. I connect a PC through one of the LAN ports.Mow my WiFi router's MAC address has not been registered at my ISP system. I need to find a way to 'change' my Routers MAC address to another MAC address. The cloning doesn't work. I need to change my Router's LAN MAC address.
View 6 Replies View Relatedi always get ban i czero due to high ping is there any way i can change my ip address so i can get in server again
View 8 Replies View RelatedI have bought a new belkin router since my old ITI router had some problems and it died. My ISP used to check my old router's mac address to authorize me to use the internet but since i have changed my router i cant access the net from home anymoreBefore i used to change the mac address of my laptop to be same as that of router to be able to access the net. How to change my new belkin router's mac address to the old ITI router's mac which i have saved in my laptop.
View 13 Replies View RelatedI need to connect to my work PC remotely through VPN, but the address of my home router (Verizon Fios) conflicts with my work address. IT guy at work is clueless, so I am stuck - been trying with him for months and this is his solution. I need to change my address on my personal router, Westell brand, but I am having no luck. I have been told to use:
ID: admin
password: password
When I tried that, each time I press a key in the password field, it enter 4 characters... I have never seen anything like that. Honestly, I'm a graphic designer and am also clueless on networking issues.
Le Pan 2 tablet keeps trying to "obtain IP address." I have a dlink 655 router. I've removed the password from the router. Rarely will the tablet connect.
View 1 Replies View RelatedHow do I change the IP address on the router?
View 1 Replies View RelatedI used to have a Thomson st-330 USB modem for my ADSL network. When I wanted to change my IP i just disconnected and reconnected a dial up connection that does the job instantly! (a wan miniport + a batch file to disconnect/recoannect with my password and username)Few days ago i bought a new modem/router (TP-LINK TS-W8951NS)Before that all I knew was that if I wanna change the ip address (if I have a router) was a batch file with commands ipconfig /release/renew.I now know that this changes the ip of my PC not the global IP! So how would I change it without restarting the router? (When i change something in my router interface page (PVC1.2.3....etc) my IP changed instantlybut how do I do this without accessing the router, like commands and a batch file etc? I just found out that my global IP changed on its own after like 30-60 min :S why is that! and to do so manually???
View 2 Replies View Relatedsince my network (static ip, cameras, and other boxes) is set up using 10.0.0.xx. How do I change the default ip address on the Linksys e3500 wifi router to 10.0.0.xx?
View 2 Replies View RelatedI have a PC with Windows 7 connected wirelessly to a EA3500 router. How do I change the IP address on my PC ?
View 6 Replies View RelatedI have noticed that after the new Firmware Update, the EA4500 will not change to a new public address. I have check my logs and my IP Address is the same going back to a 03/25/2012. I changed my router back to my old E4200V1 and it changes to a new addresses when the old one expires.
View 3 Replies View RelatedMy Speedtouch 516v6 modem does'nt provide gateway adress to the TP-Link router. The modem can work in bridged mode or routed mode and I want to use routed mode. TP-Link has PPPoE mode but I would like to use a dynamicIP mode in which the router obtain network parameters from the modem and it does, but it does not obtain a gateway address.
View 2 Replies View RelatedRVS4000 router doesnt give out an IP address to a client connecting with QVPN v1.303, connection seems good, router logs the connection and tracks its duration etc but client side does not get an IP from the RVS4000 side -keeps local LAN ip + there is no access to the remote shares etc. RVS 4000 has DHCP enabled. Client side subnet is different to the VPN side. VPN users are setup correctly (Router logs the user as connected) . Port 443 is not setup in port forwarding.
View 3 Replies View RelatedI have cable and am using an sb5101 modem and an wndr3700 v2 router. I have tried changing the router mac address with no luck. Also the ip address is dynamic not static verified by bigpond.how to change my ip address.
View 3 Replies View RelatedWhen I change my WRT320N routers IP address to use it as an access point only and bring it in the IP range of my ccombined modem/router I'm not able to view the setup page via the new IP address. I have tried to change the IP from the default 192.168.1.1 to 192.168.178.2. After changing and applying the changes I restarted the router and tried to access the router via the new address. This was not possible am I doing something wrong or did I forgot something?
View 8 Replies View RelatedMy Linksys WRT120N router doesn't accept my cellphone's MAC address... Phone's MAC address is AC:81:F3:08:13:F5 but upon adding the MAC address Internet Access Priority Category based on MAC address, I get an error "Assign MAC address is incorrect".
View 1 Replies View RelatedAttempting to get EA6500 working with TWC Motorola Surfboard SBV5220 modem, which has been working just fine for the last 2 years with a Linksys E3000 router. DHCP client in the EA6500 either doesn't ask for an IP address from the cable modem or the modem just isn't supplying one. With the E3000, you could see the IP address assigned by the cable modem and the primary and secondary DNS server addresses provided, and if the DHCP request didn't work, these addresses would be all zeroes. But, with the EA6500, I can't find an equivalent screen that shows these assignments, or zeroes when the DHCP request fails.
View 1 Replies View RelatedI've tried to cascade two Linksys routers, but It hasn't worked for me. The first one (which has cable-modem connection) is the brand new E4200, and the second one is the old WRT54GCv3.[code] However, the WRT54GCv3 doesn't get the IP address from the E4200's DHCP. I've also tried to connect them directly (without the PLC), even specifing an static IP on the second router, but I got the same results.I've to state I don't want to change the first router IP/gateway parameters because I have a web and game home server working with an static IP and I don't want to put it offline temporarily because of readjusting network parameters.
View 9 Replies View RelatedI was able to install the RV042 router to my ATT DSL line (WAN1 port-INTERNET) and it gets an external IP address automatically and the Internet works. When I connect my Comcast Internet to WAN2 port INTERNTE/DMZ) it doesn't get an IP address. and the Internet goes down and the WAN2 port ip address says 0.0.0.0.I've tried releasing/ renewing and it still says 0.0.0.0.Everything else is set as the default.
View 1 Replies View RelatedSo I'm on the 100mbps virgin fibre optic broadband, and for the past couple of days, every now and again my speed drops drastically. It's not the Internet, because I've tested it on my laptop both wireless and plugged in. Even my phone and iPad are getting higher speed.
When I first got the internet(About a week ago) my download speed was 100+ mbps, but now my Link speed is constantly at 10mbps, even if I set my NIC to 1gbps full duplex, I've tried disabling and re enabling, I've tried uninstalling and reinstalling drivers, updating drivers. Restarting the router, starting it in Modem mode.
I've been having issues with my DIR-655 - the speeds are super slow. In the past, I've been able to restart the modem, and my speeds would be acceptable, but now a restart doesn't change the speeds I'm getting from speed test.net. I know it has to do with the router, because when I directly connect to the modem, my speeds are great.
-Speeds WITH router:
-Speeds WITHOUT router:
And like I said, in the past I could restart the router, to get similar speeds to just my modem, but it doesn't work that way anymore.
I use CiscoWorks LMS 4.0.1.
I planned a discovery of devices for some time, but if I change the parameters of discovery (adding a seed device) in "Discovery Settings Summary", this change does not apply in the scheduled task.
If I change the settings in the scheduled task, the changes do not apply in "Discovery Settings Summary". We must change the settings 2 times.
My X2000 modem connect only with small speeds Kbps, it's very weak than Linksys WAG54GP2 MBPS. If I put laptop near the modem speed doesn't change.Only change occurs when I change the channel. But it speed down after a while.I set, N connection, security is WPA-personal, tried some different channel, connection 20-40mhz, update the firmware (there is no problem with laptop, with another modem I can connect with 150kb/s speed) And, if I choose auto setup, security change to WPA, If I'm not wrong.
View 3 Replies View RelatedI have a Cisco router 877. I am trying to configure a backup with ISDN.The primary line is an ADSL over pppoe. The problem is that despite the primary line fails, doesn't change the path and continue going by the main route.I have a very similar setup, also with a cisco 877, but with a normal DSL and it works perfectly.I solved the problem by activating a tracking but is slower than the other method.
View 2 Replies View RelatedHow exactly do you change your IP Address?
View 8 Replies View RelatedI'm wondering is there a way that i could actually change the IP address of a computer based on its MAC Address that is connected to a network via switch only ? By running some bat file ? I only manage to change a target computer ip,dns,subnet via running the bat file on the physical computer but not through a network with switch.
View 11 Replies View RelatedMy IP address was stolen. Someone sent me a file that I was expecting. It had a very misconcieving title. I opened it and it wouldn't work, but I let it slide. A week or two later I found pictures of myself on a forum from a hacker. The file I had opened had been a virus that hacked into my webcam. This creep told me that this had spread to 1000+ people and they all had my IP address. I am so scared! If everyone has my IP address anything could happen. How do I change my IP address without it messing up other settings in my computer and how do I remove this virus from my computer?
View 3 Replies View RelatedI tried using mac changing programs and tried to change it from the registry but none of the methods worked for me.
View 3 Replies View RelatedHow to change my routing address 192.168.1.1 to 192.168.0.1?
View 1 Replies View RelatedI'd like to register another account in a forum to comment anonymously so I need a different IP address for browsing.I remember that I had been trying this long time before but it was not easy to make it. Using proxy website is useless because the speed is very very slow. Is there any way to painlessly, easily change IP to browse websites?
View 4 Replies View RelatedHow to change IP address in windows 7
View 1 Replies View Relatedhow do I change the ip address of a wireless printer?
View 4 Replies View Related