D-Link DIR-655 :: Restart Doesn't Change Speeds
May 26, 2012
I've been having issues with my DIR-655 - the speeds are super slow. In the past, I've been able to restart the modem, and my speeds would be acceptable, but now a restart doesn't change the speeds I'm getting from speed test.net. I know it has to do with the router, because when I directly connect to the modem, my speeds are great.
-Speeds WITH router:
-Speeds WITHOUT router:
And like I said, in the past I could restart the router, to get similar speeds to just my modem, but it doesn't work that way anymore.
View 1 Replies
ADVERTISEMENT
Mar 9, 2013
So I'm on the 100mbps virgin fibre optic broadband, and for the past couple of days, every now and again my speed drops drastically. It's not the Internet, because I've tested it on my laptop both wireless and plugged in. Even my phone and iPad are getting higher speed.
When I first got the internet(About a week ago) my download speed was 100+ mbps, but now my Link speed is constantly at 10mbps, even if I set my NIC to 1gbps full duplex, I've tried disabling and re enabling, I've tried uninstalling and reinstalling drivers, updating drivers. Restarting the router, starting it in Modem mode.
View 1 Replies
View Related
Aug 19, 2012
DIR-655 A4
Firmware: 1.35NA
ISP: Comcast
[Code].....
I play Diablo 3 and the lag that is created when the router restarts as well as getting booted, along with apps on my phones locking up are about to make me throw the DLink Equipment against the wall.
FYI - the Comcast modem was just upgraded to the Xfinity Voice modem becuase I puchased two Voice lines last week. The issue was happening before the new modem was insatlled, and after. According to the Comcast Modem's status page (192.168.100.1) the modem has been online for 4 days, 6 hours, and 31 minutes. So I know the modem has not been cycling.
View 3 Replies
View Related
Aug 16, 2011
Now that the DCS-930 has a dedicated board, we can restart our firmware wishlist.
View 14 Replies
View Related
Apr 1, 2013
Region : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
ISP : HNS/Instanet (Cable Internet)
I am using the Router in 3G/4G mode, with WAN only (PPPOE) enabled. I have set a personal SSID in the Wireless > Wireless Settings > Wireless Network Name field.
I do not see the particular SSID on my computer, instead on every reboot / restart of the device a random SSID is generated. see attached screenshot. I can connect and everything works well, but I have to enter the WPA key after each reboot.
View 2 Replies
View Related
Apr 8, 2011
How come my IP address does not change when i'm using my router.... (TP-link WR340G)But when i connect my DSL directly to my computer it my IP can be changed..... and when i put back my router my IP address is the same.
View 1 Replies
View Related
Aug 8, 2011
I use CiscoWorks LMS 4.0.1.
I planned a discovery of devices for some time, but if I change the parameters of discovery (adding a seed device) in "Discovery Settings Summary", this change does not apply in the scheduled task.
If I change the settings in the scheduled task, the changes do not apply in "Discovery Settings Summary". We must change the settings 2 times.
View 1 Replies
View Related
Oct 23, 2012
My X2000 modem connect only with small speeds Kbps, it's very weak than Linksys WAG54GP2 MBPS. If I put laptop near the modem speed doesn't change.Only change occurs when I change the channel. But it speed down after a while.I set, N connection, security is WPA-personal, tried some different channel, connection 20-40mhz, update the firmware (there is no problem with laptop, with another modem I can connect with 150kb/s speed) And, if I choose auto setup, security change to WPA, If I'm not wrong.
View 3 Replies
View Related
Jan 24, 2011
I have a Cisco router 877. I am trying to configure a backup with ISDN.The primary line is an ADSL over pppoe. The problem is that despite the primary line fails, doesn't change the path and continue going by the main route.I have a very similar setup, also with a cisco 877, but with a normal DSL and it works perfectly.I solved the problem by activating a tracking but is slower than the other method.
View 2 Replies
View Related
May 19, 2013
My Belkin F7D4301 Router has the fastest wireless speed of maybe 2MBps but wired with a cat5e cable to my asus laptop of almost 7MBps. I have a one smart TV, one blue ray, one roku, and a nexus 7 using the 2.4 channel.
My Wireless 2.4 settings are channel 11, Extension channel 7, Wireless mode N (have tried with just g and b, g, and n modes), Bandwidth 20/40, Protected mode on, QOS off.
I've talked to Belkin tech support, they are the ones who had me set up my 2.4 channel this way but my wireless speeds stay just under 2MBps, they just want to keep sending me the same model Router because they think each of the new ones they send me is defective.
Am I doing something wrong or is 2MBps the best wireless speed I'm going to get?
View 1 Replies
View Related
Jul 11, 2011
i have had a DIR-655 Rev. A router for years now and had no problems connecting my laptop to it well over 150m, the iproducts never got over 65m, i'm OK with that if they just won't but i would like to get there if possible. i went out and picked up a 2nd 655 (rev B) and flashed the bios up to the newest version 2.03NA and went in and mirrored all of the settings from the original router and then replaced the old router with the new one. the old router is not being used at this time though there are plans to use it as an access point later in another part of the house. i have updated the drivers for the wireless N card on my laptop (i can't remember the name of the adapter or the model, i'll provide that when i go home for lunch today). i've tried various settings for security, (i want to use WPA2 only, personal key, AES cipher, channel width 20/40 auto) i've even tried no security and it still won't connect over 65m.
View 14 Replies
View Related
Jan 12, 2010
I'm paying to get Download Speeds of 25Mbps from my cable provider.
If I plug my computer directly into my cable modem, I get 24.98 Mbps every time.
Using the same speed test, if I go through the DIR-655 I get rates from 2.92 to 10 Mbps.
I'm on Firmware 1.32NA. I'm ready to go out and buy a different brand Router.
View 8 Replies
View Related
Feb 27, 2012
Okay i just got the DIR-615 N Router and at first i was getting 40 ping on speedtest.net but now I'm getting 360 ping which is really frustrating since i upgraded because my old one was having troubles and also when i get to the check connection in the setup i am getting Your new router does not appear to be connected properly.
View 3 Replies
View Related
May 17, 2011
I'm surprised to see speeds around 11MB on a gigabit LAN and the NAS is also gigabit. I've been reading that when people take the DLink router out of the loop that there speeds get upwards around 48Mb or so. Or if they add in a non DLink switch put the equipment on that leg with the switch.
Are there some tweaks in the 825 that could work for the LAN speed for this NAS? Seems odd to have to buy a new router or add in a switch to do what this should be doing already. This is going to be an issue for streaming movies and especially HD via WiFi across the LAN.
I would also like to do my data backups to the NAS but when they hit around 60Gb it would take a long time to do a backup.
View 14 Replies
View Related
Aug 11, 2012
How can I optimize my router to get maximum transfer speeds? I average 72 Mbps.Notebook-Speedtest.net 31.58Mbs down/3.08 up. I'm just confused about transfer speeds not being 300 Mbps. Can or should I correct this? When I purchased router it said the transfer speeds would be 300Mbps.
PC1: Connected directly through 1 gigabit ethernet LAN.I'm using a MSI GT640 notebook with a onboard NIC, Ralink Techology, Corp. 802.11bgn 1T1R mini Card wireless network adapter. Driver date: 7/6/2010, Driver Version: 3.1.8.1. ( WLAN RF module Ralink RT390, MSI MS 6891).
[code]....
View 3 Replies
View Related
May 18, 2011
I've got the DAP-1522 connected in AP mode. Multiple N speed laptops but they're limiting out to G speeds (54 mbps). Firmware 1.31. Current config is
Wireless Mode : Access Point
802.11 Band : 2.4GHz
802.11 Mode : n and g
[Code].....
Connecting with brand new windows 7 laptops. N Capable. Some G laptops on the network as well.
View 2 Replies
View Related
Apr 13, 2011
I have a DSL connection with AT&T. It is rated at 6Mbps / 768Kbps, but it closer to 4Mbps / 600Kbps. I have a speed stream 5360 connected to the DIR655. Devices on my network are primarily wireless and include; several laptops, a desktop (which is wireless n), a couple phones / Ipods and a Wii that I watch Netflix on.
I do a lot of Photography and a handful of video work, and backup / share everything online. When I am uploading photos, even with "conserve bandwidth" turned on in the uploading application, browsing sites is very slow, but reasonably functional. If I try to upload a video to YouTube, I can barely manage to do anything else the entire time it is uploading. I've tried to plan and run all my uploads overnight, but then Netflix is unusable when I want to watch it at night.
I've tried several different things, first off, with getting the Wii to function for Netflix, I turned on the QOS engine, for the IP that is assigned to it, and set it to priority 1 for all ports. I also have a entry in the QOS engine for SSH on port 23 with a priority of 10 because of how laggy my SSH sessions are. I do not have any other entries in the QOS engine, is that a problem? Should there be entries that cover other services and assign them a lower priority?
I have enable traffic shaping and Automatic uplink speed turned on. It measured the uplink speed at 695kbps, which is pretty accurate. I have Automatic Classification off, and Dynamic Fragmentation on. WISH is enabled also. I'm set to mixed n, g, and b, I'm not positive, but I do think my older laptops only use wireless b.
Even more importantly than the Netflix would be to allow me to use the Internet in a functional manner while I am uploading, that would solve a lot of problems. It seems that the uploads just hog every last bit of upload bandwidth and don't want to make room for even the small requests that one needs to send to view a web page.
View 2 Replies
View Related
Aug 17, 2012
We recently bought a home and just moved in. That being the case, we got a new ISP (Cincinnati Bell DSL). The service is advertised as "Up to 5Mbps."
My current equipment:
PC:
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7600 Build 7600
Other OS Description Not Available
[Code].....
So what can I do to achieve faster speeds? Am I limited by the hardware I have? My Dell is roughly 6 years old. Am I limited by Cincinnati Bell? Is it the location of the wireless router? Are there settings I can adjust to create a faster connection?
View 6 Replies
View Related
Dec 14, 2011
I had my Dir-655 router for over a year & this is is a first.My firmware is 1.21 & I only use my router for gaming when I'm not on my PC for home use. I have only one PC in the house that is not shared, I have also not downloaded any virus or maleware.So the past month I decided to buy a wired ethernet cord to connect to my gaming systems rather than using the wireless option to get an extra bit of speed. That has been working fine up till yesterday when all of a sudden my download speeds dropped from around 20Mb down to barely 1Mb down (I can't even get the speed test site to fully load anymore). The upload & ping remains unchanged though. Only my Download speed is being affected. This is both when I'm on the PC & when I'm online gaming.
I unplugged my D-Link router & plugged my modem directly to my PC & I got back the 20+Mb speed, so the modem or cable company are not at fault (I even called them to see if there were any problems on there end).
-I tried turning off my Firewall on my PC.
-Resetting & rebooting both my modem/router/PC.
-using different DNS numbers.
-using /flushdns.
-using /Iprenew.
-Messing around with my router configurations such as:
turning off QoS Engine.
turning off wireless.
turned of MAC filtering.
unchecked "Add DHCP Reservation".
unchecked SIP.
None of it worked. I'm still browsing at around 56k dial up speed for the past day+!I read up on the internet for similar problems, but the only solutions I saw was turning off the firewall on the PC, but that hasn't worked at all.
View 4 Replies
View Related
Mar 24, 2011
Router:Dir-655 (Hardware Ver B1;Firmware Ver 2.01Na)
Modem: Motrola SB6120
Cables: Cat 6
Machines: 1. XP SP3 w/d-link DGE-530T desktop; 2. XP Pro SP3 w/dlink DGE-530T desktop; 3. Win7 64 (Latest Drivers)
Problem is that the XP machines can download 25Mbsp on speedtest.net but the Win 7 only manages 5Mbps through dir-655 -- ALL WIRED CONNECTS!. Connect Win 7 directly to modem and d/l is 30Mbps 2 hour Netflex test of wireless indicates good performance. D-Link support had me going in circles for a while until I finally suggested that a firmware update was in order. They assured me that this had been id'd as a problem and that latest firmwire would certainly solve it. It did not.
View 14 Replies
View Related
Feb 5, 2012
I recently bought and installed a DIR-615 for my home network, and downloaded the Yahoo Widget.
Widget recognizes and display all the config information (LAN, WAN, WiFi) fine, but it does no display any of the speeds (which was the whole idea).
View 2 Replies
View Related
Jan 5, 2013
Just bought a dir-655, set it up (all though the wizard wasn't working, it kept getting stuck on step 5 of 7) so I just configured everything manually.I'm getting 2.4 MB/s speeds wirelessly.I was expecting much better, my wireless g linksys router did just slightly lower than that. My xbox 360 can't even stream HD without buffering every few mins. It also will just stop, and be unable to see the media for a couple minutes (when doing HD).I have wireless setup as WPA2, and the devices I use wirelessly are N devices. I have the router setup to only use wireless N.
View 14 Replies
View Related
Mar 1, 2010
I'm currently subscribed to Comcast's 22/5 Internet service. Internet upload speeds on both wired and wireless are about the same at ~ 5 Mbps. Wireless download speeds range from .5-3 Mbps. Wired or Wireless, I receive LAN speeds of ~32 Mbps or 3-4 MB/s. The noticeable issue is wireless internet download speed. I have tried every configuration possible with my router, updated drivers on devices, firmware and tested everything I could on all PCs, and even used the XBOX 360's media extender network tuning feature as a tool in my investigation to find this bottleneck. All reports point to internet download speed. Again, general LAN and internet upload speeds relatively meet expectations. The wired download speeds are slow at times, but consistently meet expectations.
My current Setup:
Wifi
A4 1.33NA
WPA2 Only - Personal
802.11 Mode : 802.11n only
Channel Width : 40MHz
Channel : 1
[code].....
View 6 Replies
View Related
Oct 26, 2012
I have tried 2 DIR-655 routers now, revision B1, firmware versions 2.04, 2.07, 2.08beta and a number of laptops and wireless mini pci-e nics and I simply CAN'T get faster than about 10 megabytes/sec transfer speed from a wireless laptop to a wired gigabit desktop.
Is this just simply a limitation of these routers? Can they simply not transfer data at decent speeds? I've seen real world transfer speeds near 12 megabytes/sec on a DIR-615 and I assumed the limiting factor there was the 100megabit wired connection.
I've spoken to a dozen different D-Link phone support workers
View 14 Replies
View Related
Nov 16, 2012
wr2543ND / very slow shared storage transfer speeds?
View 4 Replies
View Related
Sep 18, 2012
I have recently had trouble with my wireless D-link WBR-1310 Router. Two days ago everything was working fine, my wireless connection from the router to my macbook was fine and the wired connection to my desktop pc was also fine. I went to bed and when I woke up the next day everything was still ok. About 3 hours after I had first turned on the PC that next day my wired connection started spiking and dropping connection frequently, maybe every 5-10 minutes or so. I play world of warcraft and I also use Mumble VoiP Program and my pings in both are over 800 constantly now making it impossible to stay connected to either program. Sometimes it will drop down to regular numbers (25-50ms, I play on eastern servers as I am in NY) but then rapidly jumps back up into the 1,000's. My wireless connection is still fine though nothing has happened to that, only my wired connection is messing up.
I've tried changing my speed and duplex settings on my onboard NVIDIA nForce 10/100 Mbps Ethernet which is what im using but it hasn't worked. When connecting directly through the modem the problem seems to stop so its definitely the router.
Wireless Router: D-link WBR-1310
Hardware Version: B1
Firmware Version: 2.02
[Code]......
View 2 Replies
View Related
Jan 29, 2013
too many users know my security key. How can i change it?
View 1 Replies
View Related
Jun 2, 2011
how to do Mac cloning on a Dlink Router, I know I have to go to 192.168.0.1 admin page but from there, I dont know anything. I wanna clone my mac address so I can change my ip address. After I clone it, then what do I do to change my IP? Please dont say stuff like you dont need to mac clone to change IP. Mac cloning seems to be the only way to change my IP. EDIT: I changed my Mac, cloned it. Then I resetted my router but the I couldnt surft the internet anymore. I had to change back to my old MAC to get internet back.
View 1 Replies
View Related
Jan 21, 2011
I have a DIR-655 connected to a linksys switch via lan to lan. The 655 is on the other end of the house. I can not connect to the 655 to enable policies or make changes. I can connect for internet, thats all. I was told that I had to have the router IP close to the linksys (192.168.1.1). I wanted to change the ip address of the 655 to 192.168.1.2 . Every time I do this I can no longer connect to the 655 via lan. I have rebooted my computer and the 655. Nothing. I have to hard reset just to connect to it and start all over again.
View 14 Replies
View Related
Jul 3, 2011
I need a new ip address form my provider.I now that thy work with the mac address,How van i cahnge that in my dlink 655
View 5 Replies
View Related
Oct 26, 2011
I've searched high and low across the wide web, but I have found no real answer to this problem;Recently, I bought the DIR-655 because the gods of thunder decided to euthanize my old WAP. The original plan was to mate this up with a Tilgin VOOD-modem (modem and router in one; a heap of s**** in my uneducated eyes) in order to make networking within my appartment somewhat easier.
Got it safely indoors, plugged it in as the manual told me, and got it going (my old WAP was also a D-LINK, so the interface was somewhat familiar). Checked cabled connection, worked fine, and I got the wireless-bit to function as well. But then I, or my Xbox 360 to be right on the money, encountered a little problem. As I understand from a little bit of research, I found out that this was a dreaded phenomenon known as
"Moderate NAT"
Before I got the old WAP indoors, I used the onboard router in the TILGIN to do the switching. I used to have this problem back then also, but solved it by opening some of the ports on the modem. Then it switched to "Open NAT", and worked like a charm. Now however, I have ran into a problem I can't dig myself out of. I have tried DMZ, opening numerous ports all the way to the full monty, but I can�t get that NAT to wander into the more acceptable range. And then it became clear that the internet on my laptop was somewhat amputated as well; simple youtube-videos became harder to load (sometimes it actually had to stop for extended streaming!), and this is not acceptable on a 20 mbt DSL-line!
View 8 Replies
View Related
Jan 22, 2012
I play my xbox 360 wired threw my DIR-655 router and when I play online I notice on most games that my nat is strict. Does anyone know how I can change my nat on my router.
View 11 Replies
View Related
Jan 24, 2011
Right now when my hom ephone rings I get disconnected from my ps3 game (black ops) which really sucks.
So I called the telephone provider and he said i can change the frequency on my router so that i won't have to have the same frequency has my phone.
I am unsure of how you change the frequency on my DIR-825.
View 1 Replies
View Related
