D-Link DIR-655 :: Getting Super Slow Download Speeds With Router
Dec 14, 2011
I had my Dir-655 router for over a year & this is is a first.My firmware is 1.21 & I only use my router for gaming when I'm not on my PC for home use. I have only one PC in the house that is not shared, I have also not downloaded any virus or maleware.So the past month I decided to buy a wired ethernet cord to connect to my gaming systems rather than using the wireless option to get an extra bit of speed. That has been working fine up till yesterday when all of a sudden my download speeds dropped from around 20Mb down to barely 1Mb down (I can't even get the speed test site to fully load anymore). The upload & ping remains unchanged though. Only my Download speed is being affected. This is both when I'm on the PC & when I'm online gaming.
I unplugged my D-Link router & plugged my modem directly to my PC & I got back the 20+Mb speed, so the modem or cable company are not at fault (I even called them to see if there were any problems on there end).
-I tried turning off my Firewall on my PC.
-Resetting & rebooting both my modem/router/PC.
-using different DNS numbers.
-using /flushdns.
-using /Iprenew.
-Messing around with my router configurations such as:
turning off QoS Engine.
turning off wireless.
turned of MAC filtering.
unchecked "Add DHCP Reservation".
unchecked SIP.
None of it worked. I'm still browsing at around 56k dial up speed for the past day+!I read up on the internet for similar problems, but the only solutions I saw was turning off the firewall on the PC, but that hasn't worked at all.
View 4 Replies
ADVERTISEMENT
Jan 12, 2010
I'm paying to get Download Speeds of 25Mbps from my cable provider.
If I plug my computer directly into my cable modem, I get 24.98 Mbps every time.
Using the same speed test, if I go through the DIR-655 I get rates from 2.92 to 10 Mbps.
I'm on Firmware 1.32NA. I'm ready to go out and buy a different brand Router.
View 8 Replies
View Related
Aug 17, 2012
We recently bought a home and just moved in. That being the case, we got a new ISP (Cincinnati Bell DSL). The service is advertised as "Up to 5Mbps."
My current equipment:
PC:
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7600 Build 7600
Other OS Description Not Available
[Code].....
So what can I do to achieve faster speeds? Am I limited by the hardware I have? My Dell is roughly 6 years old. Am I limited by Cincinnati Bell? Is it the location of the wireless router? Are there settings I can adjust to create a faster connection?
View 6 Replies
View Related
Mar 24, 2011
Router:Dir-655 (Hardware Ver B1;Firmware Ver 2.01Na)
Modem: Motrola SB6120
Cables: Cat 6
Machines: 1. XP SP3 w/d-link DGE-530T desktop; 2. XP Pro SP3 w/dlink DGE-530T desktop; 3. Win7 64 (Latest Drivers)
Problem is that the XP machines can download 25Mbsp on speedtest.net but the Win 7 only manages 5Mbps through dir-655 -- ALL WIRED CONNECTS!. Connect Win 7 directly to modem and d/l is 30Mbps 2 hour Netflex test of wireless indicates good performance. D-Link support had me going in circles for a while until I finally suggested that a firmware update was in order. They assured me that this had been id'd as a problem and that latest firmwire would certainly solve it. It did not.
View 14 Replies
View Related
Mar 1, 2010
I'm currently subscribed to Comcast's 22/5 Internet service. Internet upload speeds on both wired and wireless are about the same at ~ 5 Mbps. Wireless download speeds range from .5-3 Mbps. Wired or Wireless, I receive LAN speeds of ~32 Mbps or 3-4 MB/s. The noticeable issue is wireless internet download speed. I have tried every configuration possible with my router, updated drivers on devices, firmware and tested everything I could on all PCs, and even used the XBOX 360's media extender network tuning feature as a tool in my investigation to find this bottleneck. All reports point to internet download speed. Again, general LAN and internet upload speeds relatively meet expectations. The wired download speeds are slow at times, but consistently meet expectations.
My current Setup:
Wifi
A4 1.33NA
WPA2 Only - Personal
802.11 Mode : 802.11n only
Channel Width : 40MHz
Channel : 1
[code].....
View 6 Replies
View Related
Nov 9, 2011
I usually get a solid speed of 2.3MBss yet today I am getting only 500kb/s I have reset my router 3 times, and my computer twice. Why is it happening?
View 1 Replies
View Related
Apr 14, 2012
I have been searching for about 2 days now about this problem and have tried almost everything I can think of to fix it but none seems to work Okay so I have a ISP package for 55 Mbp/s Down and 3 Mbp/s Up but when connected to the router either lan or wireless I am speedtesting at about 15 Mbp/s. I have called the cable company, they had told me that my signal was fine blah blah, I insisted the guy come out and still look at it so he did and on that day it just decided to run at the advertised speeds. I am running a WNDR 3400 Netgear V1 Router. I have tried changing MTU Size.
View 11 Replies
View Related
Apr 29, 2012
I have an E1200 that will work fine for a while, then suddenly the download speed for all wireless devices will drop to between 20-30 KB/sec. It happened last night when we were watching videos on Hulu. We were blazing along fine, when all of a sudden the connection was horrible enough that we had to stop watching. We have no idea what changed - there are only two of us in the house and we were both passively watching Hulu.
This has happened before, and usually changing something like the wireless channel has fixed it, but not this time. The PCs we have that are connected to the router via Ethernet get between 1-3 MB/sec, so I know it's not the modem or the ISP.The signal strength is good (4-5 bars). I have tried repositioning the router and the wireless reciever but that hasn't worked.I have the latest firmware for the router as far as I know (v2.0.02).
I have tried every channel available (including "Auto"). I have tried switching the Channel Width between Auto and 40 MHz. I have tried resetting the router to factory settings and re-uploading my configuraiton. I have tried setting QoS.
View 9 Replies
View Related
Aug 28, 2012
I have been experiencing intermittent issues with download speeds of 1-3 MB and ironically upload speeds of almost 10MB. When everything is working fine I get download speeds of about 35MB and upload speeds of 5MB which is normal. This issue comes and goes. I had Comcast come out several times and we finally pinpointed it back to the WRT400N router. The Comcast modem is a Cisco DPC3008 model. I know there are known issues with the Cisco WRT400N but have had a hard time finding the information. Any known issues for this model and if so what are the fixes. BTW, the firmware is up to date.
View 2 Replies
View Related
Aug 22, 2012
I have been having a problem with my router for the past two weeks and my ISP (RCN) has done nothing to fix it so maybe with our nerd power combined we can find a solution!My router runs fine about 60% of the time, I get 20-24Mbps down and 2Mbps up connect wirelessly. the other 40% of the time the download speed suddenly drops to 1.5-2Mbps down and 1Mbps up. There is nothing in particular that I will be doing at the moment it just suddenly dies.Things I have done that have not worked.I have changed my channel to 1,6,and 11.Updated firmware.Factory Reset (New broadcast name/password).Set up static IPs.I have tried disabling WMM Support and this just kills any connection wirelessly to the router.Is there anything else you can think of to fix the issue, or should I just be demanding a new router the next time they come
View 1 Replies
View Related
Jun 5, 2011
All I want is functional Wi-Fi in my house like the rest of the world. Unfortunately, I cannot have that for whatever reason.
Now that I said that, Let's me get down to explaining my issue. I orginally owned a Linksys WRT350n. This router worked fine for years, untill one day I decided to do a speed test on my new Motrola Atrix. My Wired computer gets ~22000kbps down and 4000kbps up... My wireless speedtest on my Atrix yielded 2000kbps down and 4000kbps up. I assumed it was the phone, so i went and tried every other wireless device in my house. Everyone of them got the same result.. 2000kbps down.. 4000kbps up.
At this point I went into my router settings and tried every available channel, all of them yielded the same result of 2000kbps down and 4000kbps up.. At this point, I assumed it was the router. Ive had it for a few years and figured it was just reaching EOL. I rushed to my nearest bestbuy to pick up a brand new Linksys E4200. I brought it home, hooked it up and was eager to test my new wireless speeds. Unfortunately the same results of 2000kbps down and 4000kbps up was the yield. Once again, I've tried every possible channel with no change to my speeds. At this point I called up Linksys/Cisco support.. They were POSITIVE it was a hardware issue and had me exchange the router, even though I informed them i had the same issue with my older router of a different model. I went along with it anyway, and exchanged my router. Same issue. I called Cisco/Linksys back up and informed them, and basically they told me "they'd make a note of the issue and call me back at a later date."
I downloaded a WiFi Analyzer on my cell phone. Theres only two other dectable networks in my area, and they are low low low signal. So, I don't believe it's heavy saturation. The router is in the same room as 3 of the wireless devices that get 2000kbps down/4000kbps up. So it's not range either.
View 3 Replies
View Related
May 9, 2013
I recently set up a new E1200 router to replace my old one. We are having problems with very slow download speeds (often <0.10 Mbps) even while the upload speeds are OK (8-10 Mbps). Our previous download speed over wifi was 10-15 Mbps.When I first set it up, the download speed was very poor on the initial computer. After fooling around, it was fine. I don't know what I did that made it speed up. However, my wife's computer has had very poor download speeds. After rebooting my computer, the download speed has also dropped bak to <0.10. I was able to stream Hulu on my Wii just fine an hour ago.
View 1 Replies
View Related
Feb 28, 2013
i recently switched from a wrt54g to a Cisco e1200 and my average torrent download and upload speeds went to 1200/kbps 100/kbps to around 200/kbs 0-1/kbps i got the latest firmware tried different channels disabled the wmm I've also tried wireless n only and wireless g only. I have no way to test the wired speed. I have a n adapter.what do i do.
View 9 Replies
View Related
May 13, 2013
Since we purchased our router in February, we've had intermittent problems with speed, and now it seems to be permanent. If we connect directly to the Comcast modem, everything is fine. If we connect to the router, directly or wirelessly, speeds drop to <3.
View 9 Replies
View Related
Aug 28, 2012
I have a Linksys WRT160N V2 wireless router that I am using with my Comcast Internet service. When I connect to the router via cable, I get download speeds up to 52Mbs (per www.speedtest.net). When I test my wireless connection, I can only get download speeds up to 14.5 Mbs, even though the Windows “Wireless Network Connection” speed shows 54.0 Mbs. I also verified this with another laptop, and got the same results. I also checked upload speeds, both wired and wireless I get the same speed of 11 Mbs.
Is there some reason I can’t get faster download speeds with a wireless connection?
View 3 Replies
View Related
Jul 29, 2011
I did a search and came across this board because I too am having the same issues with wireless connection. I went as far as buying a new router, which like the original post stated, worked well for a few and then stopped. It's frustrating because I need the wireless connection for many items I use at home.
View 2 Replies
View Related
Feb 9, 2012
I'm having really slow speeds surfing the internet, watching videos on sites like youtube, and downloading files. So i went to [URL] and found that my download speeds are only 1.3 mbps!! my upload is fine, around 5 mbps.I am wirelessly connected to the router, but the signal strength is fine.
View 2 Replies
View Related
May 25, 2012
When I download stuff, Skype, Minecraft mods, youtube videos. It always downloads aroung 100-400kb/s My freind thought it was just the dl server that was slow, but I've tried different downloads from different sites, and they all have the same speed.Using Netgear router, default settings, WIRED, Google Chrome.
View 1 Replies
View Related
Apr 29, 2013
I have a Linksys E1200 modem and I am only getting less than 1.0 mbps download speeds. When connected via ethernet cable to the router, my download speed is > 50 mbps.
View 2 Replies
View Related
Dec 27, 2012
I just got a new Lenovo Ideapad y500 a few days ago, and the internet speed has been incredibly slow from the get-go. Loading images on pages takes way longer than it should, I can't watch streaming videos that last 4 minutes without it pausing to buffer every 5-10 seconds. It took about 20 minutes to download a 50mb file. My 4 year old laptop loads everything way faster, especially when downloading files. I did a ping test on both and everything was about the same, except I got a download speed of .75 mb/s on the new laptop, and between 12-17 mb/s on the old laptopI did a few ping tests, and this is what I got:Ping: 25 msDownload speed: .75 mbpsUpload speed: 4.10 mpbs.
And then I tried the same test with the laptop plugged directly in to the router with the ethernet cable and I got a ping of 20 + download speed of 25.12 mbps, and I tried loading a few youtube videos and they ran perfectly. Then I ran the test again over wifi, only this time I ran it sitting right next to the router. Still got download speeds of about 20 mbps. As soon as I got back to my room (which isn't that far from the router) the download speed dropped back to ~.80 and everything went back to loading slow again. The thing is, running the test from the exact same spot in my room on my old laptop, I still was able to get download speeds of around 18 mbps. My network card is an Intel Centrino Wireless N-2230 and the router is Linksys WRT150N wireless-n.I've tried downloading the wireless drivers from Lenovo, and it didn't change anything. So those are up to date. There were no firmware updates available for the router on Linksys' site
View 2 Replies
View Related
Jul 12, 2012
I am having difficulty uploading files on the internet because the speeds are so slow. My download speed is 23.88 MBPS, bu upload is .3 mbps. This seems to be a recent problem. The other computers on the network get upload speeds of 5mbps and do not have any problem, so I think there is some problem unique to this computer, and not a network problem. I can't back up my files because the speed is too slow.
View 8 Replies
View Related
Dec 30, 2011
I was using Billion ADSL 2+ modem since last 6 years. It was working well but I need Wireless LAN N speed connection and I bought Linksys WAG320N.After configuring the modem my download speed has come doen't to less than 1Mb/s. When I connect to my old Billion I am getting 16Mb/s. [code]
View 2 Replies
View Related
Oct 8, 2012
I had recently upgraded my computer, which currently looks like this:
CPU: i5 3570
MOBO: Gigabyte GA-Z77M-D3H-MVP
RAM: G.Skill 16GB DDR3 1600MHz
HDD: Seagate ST1000DM003 1TB Barracuda + Seagate 320GB Barracuda
GFX: Sapphire HD4850 512MB Dual Slot Fan
PSU: OCZ StealthXtream 500W
(The bits in bold were the upgraded parts, up from an AMD Athlon64X2 6000+)
For some really strange reason, my web browsing has been ridiculously slow, with the words "Waiting for [website]" always showing up in the bottom corner of Chrome for a good 10-20 seconds before the website loads. This happens to every website I visit, bar Facebook (secret Facebook virus?). It's especially bad on shopping websites such as eBay, taking upwards of a minute to load pages. I have tried Internet Explorer and the same thing is happening.
My downloads, on the other hand, have been unaffected by the upgrade, with download speeds averaging 800KB/s.
If it matters, my current modem/router is a D-LINK DSL-G604T; my other devices work perfectly fine on this modem, with browsing speeds being faster on my 2G iPod Touch than my desktop computer.
I currently use Avira Internet Security 2012 as my anti-virus.
I also use these extensions in Chrome (if it matters):
4chan Plus 2.5.5
Adblock Plus (Beta) 1.2
LastModified 1.1.2
Neater Bookmarks 0.9.4
PhotoZoom for Facebook 1.1208.30.1
Session Buddy 3.0.16
Xmarks Bookmark Sync 1.0.22
Youtube Ratings preview 2.0
I have tried disabling all add-ons and the speed is still the same
In the middle of writing this, I decided to download Firefox, which has improved on my browsing speed somewhat, but still has hiccups here and there (Facebook takes forever to load in Firefox). But having been a Chrome user for a long time, I would like to stick with it.
View 15 Replies
View Related
Jun 30, 2011
After recently intalling the WMP600N wireless adapter I have had great trouble getting it working properly.
Current performance
- signal: verygood/ excellent
- download speed: ~1mb
- upload speed: ~2mb
- signal speed: 18-54mbps (lots of variance but never above 54)
Comparison to my laptop
Laptop in same location with wireless G capability
- signal: verygood/ excellent
- download speed: ~20mb
- upload speed: ~2mb
- signal speed: 54mbps
my router is a D-Link wireless N router I recieved from my ISP. I do not believe my router is to blame for this problem since I have a laptop with an inferior wireless adapter recieving 20X the download speed.Drivers I have installed the latest drivers for windows 7 and I am running windows 7 Ultimate 64bit.
View 3 Replies
View Related
Feb 27, 2012
Okay i just got the DIR-615 N Router and at first i was getting 40 ping on speedtest.net but now I'm getting 360 ping which is really frustrating since i upgraded because my old one was having troubles and also when i get to the check connection in the setup i am getting Your new router does not appear to be connected properly.
View 3 Replies
View Related
May 19, 2013
My Belkin F7D4301 Router has the fastest wireless speed of maybe 2MBps but wired with a cat5e cable to my asus laptop of almost 7MBps. I have a one smart TV, one blue ray, one roku, and a nexus 7 using the 2.4 channel.
My Wireless 2.4 settings are channel 11, Extension channel 7, Wireless mode N (have tried with just g and b, g, and n modes), Bandwidth 20/40, Protected mode on, QOS off.
I've talked to Belkin tech support, they are the ones who had me set up my 2.4 channel this way but my wireless speeds stay just under 2MBps, they just want to keep sending me the same model Router because they think each of the new ones they send me is defective.
Am I doing something wrong or is 2MBps the best wireless speed I'm going to get?
View 1 Replies
View Related
Oct 26, 2011
My E1500 worked perfectly before. Today CiscoConnect notified me to upgrade my router. After I've done that, the wifi connection speed is super slow. But when I use hardwire to connect, the speed is as fast as before
View 9 Replies
View Related
Oct 22, 2011
Just upgraded my E4200 to firmware 1.0.03 (from 1.0.01). I have some new issues, questions, and some outstanding issues.
1) Web interface over https is now painfully slow.
2) Does DDNS work in bridge mode? DynDNS allows the sending of an update without an IP address, so it should be able to work.
3) Does accessing the management interface in bridge mode count as local or remote?
4) I'd really like to be able to get WOL working through the router. I managed to create a static DHCP reservation for 192.168.1.254 to ff:ff:ff:ff:ff:ff, but I don't think the router added that entry to the ARP table, is there any way to do this.
(I think have WOL forwarded to 192.168.1.254). 5) Should the router be providing some local dns hostnames? For example I have the device name set up in the local network setup, but it won't resolve. Similar for connected devices, especially those with with a DHCP reservation. 6) In bridge mode, does it matter which port is used to connect to the other network device? Does it have to be the WAN port?
View 6 Replies
View Related
Jun 19, 2011
For the past year my wireless has been working great and I have being playing games/doing homework with no hassle. Yestetday my internet connection became very slow. After countless restarts, router/modem resets nothing has changed and I only get like 5kb of download speed. Since my internet connection was lost naturally I unplugged the wireless card and re-plugged it, didn't change anything. After that I restarted my computer, but nothing changed. AFTER THAT I unplugged my router, then reset my router to factory settings, which did not change anything. Since everything was backed up I thought I would reinstall Windows 7 to nuke any hidden problems. After 2 reinstalls of Windows 7, nothing has changed. Next I had Comcast reset my connection with them which did not work. Though it did work with my brothers desktop. After some more time just fiddling around my connection went back to lightning speeds. no.....4 hours later my connection went dead.At all times my computer will see my network but it either will not connect to it or it is really really slow now.
Computer info: Apple Airport Extreme router Hawking HWUN3 Wireless USB ASUS P6T Motherboard
View 2 Replies
View Related
Apr 13, 2011
I have a DSL connection with AT&T. It is rated at 6Mbps / 768Kbps, but it closer to 4Mbps / 600Kbps. I have a speed stream 5360 connected to the DIR655. Devices on my network are primarily wireless and include; several laptops, a desktop (which is wireless n), a couple phones / Ipods and a Wii that I watch Netflix on.
I do a lot of Photography and a handful of video work, and backup / share everything online. When I am uploading photos, even with "conserve bandwidth" turned on in the uploading application, browsing sites is very slow, but reasonably functional. If I try to upload a video to YouTube, I can barely manage to do anything else the entire time it is uploading. I've tried to plan and run all my uploads overnight, but then Netflix is unusable when I want to watch it at night.
I've tried several different things, first off, with getting the Wii to function for Netflix, I turned on the QOS engine, for the IP that is assigned to it, and set it to priority 1 for all ports. I also have a entry in the QOS engine for SSH on port 23 with a priority of 10 because of how laggy my SSH sessions are. I do not have any other entries in the QOS engine, is that a problem? Should there be entries that cover other services and assign them a lower priority?
I have enable traffic shaping and Automatic uplink speed turned on. It measured the uplink speed at 695kbps, which is pretty accurate. I have Automatic Classification off, and Dynamic Fragmentation on. WISH is enabled also. I'm set to mixed n, g, and b, I'm not positive, but I do think my older laptops only use wireless b.
Even more importantly than the Netflix would be to allow me to use the Internet in a functional manner while I am uploading, that would solve a lot of problems. It seems that the uploads just hog every last bit of upload bandwidth and don't want to make room for even the small requests that one needs to send to view a web page.
View 2 Replies
View Related
Sep 18, 2012
I have recently had trouble with my wireless D-link WBR-1310 Router. Two days ago everything was working fine, my wireless connection from the router to my macbook was fine and the wired connection to my desktop pc was also fine. I went to bed and when I woke up the next day everything was still ok. About 3 hours after I had first turned on the PC that next day my wired connection started spiking and dropping connection frequently, maybe every 5-10 minutes or so. I play world of warcraft and I also use Mumble VoiP Program and my pings in both are over 800 constantly now making it impossible to stay connected to either program. Sometimes it will drop down to regular numbers (25-50ms, I play on eastern servers as I am in NY) but then rapidly jumps back up into the 1,000's. My wireless connection is still fine though nothing has happened to that, only my wired connection is messing up.
I've tried changing my speed and duplex settings on my onboard NVIDIA nForce 10/100 Mbps Ethernet which is what im using but it hasn't worked. When connecting directly through the modem the problem seems to stop so its definitely the router.
Wireless Router: D-link WBR-1310
Hardware Version: B1
Firmware Version: 2.02
[Code]......
View 2 Replies
View Related
May 17, 2011
I'm surprised to see speeds around 11MB on a gigabit LAN and the NAS is also gigabit. I've been reading that when people take the DLink router out of the loop that there speeds get upwards around 48Mb or so. Or if they add in a non DLink switch put the equipment on that leg with the switch.
Are there some tweaks in the 825 that could work for the LAN speed for this NAS? Seems odd to have to buy a new router or add in a switch to do what this should be doing already. This is going to be an issue for streaming movies and especially HD via WiFi across the LAN.
I would also like to do my data backups to the NAS but when they hit around 60Gb it would take a long time to do a backup.
View 14 Replies
View Related
Jan 5, 2013
Just bought a dir-655, set it up (all though the wizard wasn't working, it kept getting stuck on step 5 of 7) so I just configured everything manually.I'm getting 2.4 MB/s speeds wirelessly.I was expecting much better, my wireless g linksys router did just slightly lower than that. My xbox 360 can't even stream HD without buffering every few mins. It also will just stop, and be unable to see the media for a couple minutes (when doing HD).I have wireless setup as WPA2, and the devices I use wirelessly are N devices. I have the router setup to only use wireless N.
View 14 Replies
View Related
