Wireless :: Internet Is Connected But Can Only Load Sites
Jan 7, 2011
I am having trouble with my wireless connection. I am only able to visit websites but if I try to use the internet for anything else (AIM, Yahoo instant messenger, etc), it will not work. This is not a modem issue because my other computers' connections still work fine.
Configuration Host Name . . . . . . . . . . . . : JingJunBusiness
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
View 1 Replies
ADVERTISEMENT
May 9, 2011
About a week ago my mom (unknowingly to me) installed a registry "booster" (Uniblue Registry Booster) and as expected, it messed some stuff up. As soon as she finished scanning and it "fixed" all her registry issues, she could no longer load webpages in her browser.PC was running XP at the time of the corruption, none of her system restore points work, and unfortunately her automatic backups had stopped running about 2 months ago without me knowing. She's been planning to switch to Windows 7 soon anyway so after a few days of trying to find a solution and not having any luck I thought "well maybe if we upgrade it will unintentionally fix some files / settings during the install." Going from XP to Windows 7 was no fun task itself, but after many hours of installs I had it upgraded to Vista and then to 7.
View 15 Replies
View Related
Apr 30, 2011
i have a adsl modem tp link td 8840, and i had this up and running well for about 3 days. then we decided to get a router cause my little sis got a ipad2.the router is dlink dir 61.so basically i followed all the instructions and the internet was working fine.then for some reason ign site stopped working, i thought that it was down for some reason and didn't think much of it and today when i tryed to go into hotmail or facebook it doesn't work either. so i can get into the log in pages of both, but when i put in the id and password, the screen goes blank and just says waiting for .... on the bottom (using google chrome).and it never loads.i tryed with other internet browsers and it din't work so i took out the router and re wired the adsl modem only and voila. all the sites started working again.i want to use my router but i don't know why i can't acess some sites when i have it connected.
View 1 Replies
View Related
Jan 14, 2011
I have today the issue that I am unable to load certain websites, I can enter but whenever I click on continue to navigate in that same site for example FACEBOOK, I see the operation just loads and dont go anywhere, after that remains in same condition unless I cancel or close the browser.I checked the firewall, and also the antivirus, but nothing seems wrong, I can get in into HOTMAIL, GOOGLE, but again certain sites if I search something on GOOGLE, get frozen again .
View 1 Replies
View Related
May 26, 2012
So i just brought my computer home from my dorm where it was working fine. as it is in my rom now I bought the XAVB1004 from netgear to connect it from my room t the router in the computer room. That device works great as I have tried my laptop with it and it works. I can connect to the internet as i have set u my router on my computer( the one that i took from my dorm) but only google loads, i can also search in google, and youtube loads where i can oddly watch videos no problem. I have tried reinstalling my ethernet drivers, winsock reset, checking/unchecking just about every setting in internet options and so on. No browser seems to work and I am out of ideas. I turned firewall off as well to no prevail. I have no clue where to look next as 3 days ago my computer worked fine and all I did now was move it.
View 7 Replies
View Related
Jul 2, 2011
Recently I have been having problems with my computer. For some reason It says that it is connected to the internet and will work for a few minutes, but then suddenly stop working yet still say it is connected to the internet. I have looked around the forums for things like this and I haven't found a fix yet. What I do to get internet is to swap between the 2 wifi signals in our house. I am the only person in my house who uses PC. The rest of my family uses mac, so we have mac routers. I have an asus N53J. [code]
View 3 Replies
View Related
Oct 12, 2012
This problem just started. I am unable to load certain https sites (for work). If i directly connect to ethernet, it works, so my isp isnt my problem. When i try to connect to the sites, it says "sending request" then times out. I have played around with the settings non stop and nothing has worked. I have a mac running 10.7.5.
View 3 Replies
View Related
Aug 27, 2012
I've been having this problem for around two years on my current laptop, but today it finally got so frustrating I had to ask about it. I've tried and tried to search for others with a similar problem, but have never found a good solution. When my computer turns on and connects to an internet source (LAN or wifi), it will work fine indefinitely. However, if I join a different LAN or wireless network later, such as when I go from home to school, it will connect to the new network, but after a few minutes, I will be unable to load any web pages (Connection timed out).
Skype and email still work fine, and the only browser I use is firefox, so this may be a firefox-specific issue. If I reset the network adapter being used, then I will be able to load websites again, but after 2-30 minutes, I will run into the same issue and have to reset the adapter again. Joining a different network does not resolve the problem. Restarting firefox does not resolve the problem. Clearing the firefox cache is a temporary solution only, similar to resetting the network adapter. Restarting the computer entirely will result in no connection problems, until I have to change networks again.
Specs are below, and again, I connect to the internet using firefox 14.0.1 Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz, Intel64 Family 6 Model 30 Stepping 5 Processor Count: 8 RAM: 4030 Mb Graphics Card: NVIDIA GeForce 310M, 512 Mb Hard Drives: C: Total - 464783 MB, Free - 133483 MB; Motherboard: TOSHIBA, Portable PC Antivirus: Microsoft Security Essentials, Updated and Enabled
View 2 Replies
View Related
Apr 24, 2011
My Internet is connected as I can load pages through my iPhone on my wireless signal BUT on my laptop the only page that will load is my UniSA home page and my Uni email - nothing else will load - I have tried Mozilla, IE & Safari and get the same response with all of them. Don't know if I have accidentally done something or what?
View 5 Replies
View Related
Feb 21, 2013
I use my android as a mobile hotspot to connect to the internet on my laptop. My laptop says it is connected to the internets.d has a strong connection but will not load any page on internet. I use my mobile hotspot to connect to the internet on other devices and it works great. I am using windows 7 operating system and internet explorer for my browser.
View 1 Replies
View Related
Jun 9, 2011
I am having trouble with the internet on my HP laptop.. I am positive it is connected to the internet, yet pages won't load.. when I troubleshoot it says no problems detected
[code]...
View 14 Replies
View Related
Feb 24, 2012
IE and Firefox both refused to load my homepage (google) or any other page in my bookmarks. Uninstalled and reinstalled both, even going back a couple of versions and still nothing. I know I'm connected as my iPhone works fine. With this in mind, I tried opening up safari to see what that would do and to my supprise, it works fine, bit slow but still, at least it works. So now I defiantly know that the Internet is working.
View 4 Replies
View Related
Jul 20, 2011
I have done so much research and tried almost everything on these forums, but still the internet wont load on my laptop. It is a Acer mini with Windows 7 starter. The other day the internet just stopped loading pages. It shows that it is connect to my router, and when I try to go to a page, it just says loading. I tried to connect with the ethernet chord from the modem and it does the same thing. I think there is a connection, but just wont load pages because the avast will update the virus definitions. I've tried to update the drive, reset the ipconfig. One thing I noticed is that the ip6v says not connected but the ip4v says internet. If I can do anything to get more info I surely will post it back up here, I just need to get my connection back up
View 4 Replies
View Related
Oct 27, 2011
I'm currently writing this from my fiances house, due to the fact that my internet is currently not working. I'm not sure what happened, but yesterday afternoon, all of the sudden, I couldn't load webpages. I went and power cycled the router and modem and everything, still nothing works. It says I am connected to it and the Internet, but webpages will not load. I'm a little confused because the program Skype was working, but nothing else was. Any idea how to fix this? I don't have any information from the computer such as IP configuration or any of that since I am not at home. The router is connected to a desktop PC running Windows XP, and it is wirel
View 1 Replies
View Related
Nov 27, 2011
My computer (running windows XP and connected to the internet with a D Link USB adapter) refuses to load any webpages: despite showing full signal strength and connection in both the D Link settings and the windows XP wireless panel.I am able to ping websites and other computers in the house (all of which are able to access the internet) but no pages load in any browser I try.
View 1 Replies
View Related
Sep 15, 2012
She has an older HP Vista laptop that connects to the internet just fine (including downloading updates, connecting to messenger clients, etc.), but it will not connect to any of her browsers...
1. I understand firewalls can throw huge issues, I am pretty sure this is where the problem lies. She was using Ad-aware and I am pretty sure that the window that popped up that she clicked switched her firewall settings back to default and left something weird in the system. When I try to disable Windows firewall and go back to Ad-aware it won't let me exit snooze. It asks if I confirm and when I do nothing happens.
2. I have done a winsock reset and made sure that the proxy boxes are unchecked to make sure there isn't a proxy problem.
3. The ipconfig/reset threw no errors, everything looks fine.
4. No hardware conflicts or errors reported in device manager and all drivers are up to date. Again since the internet is actually working minus the browser I don't think it is a hardware issue.
5. No virus detected. Symantec is loaded on the laptop did a run with that, also have AVG that I installed and ran (disabled one and did the other, never run simultaneously). AVG is now uninstalled as Symantec is disabled to avoid any conflict with AdAware.
Is there any way to completely disable all firewalls, remove any settings or registries (if any), and start from scratch with it? Also, as networking is by far my weak point, is there anything I need to check as far as the DNS is concerned?
View 7 Replies
View Related
Oct 22, 2012
my computer shows connected to net but webpage doesnt load why i have a lenovo notebook
View 1 Replies
View Related
Oct 26, 2012
Certain sites on my desktop will not load. These sites include speedtest.net, twitter, battle.net ect. Youtube opens, but videos don't play. However some work fine, such as reddit.However, my connection is fine on my laptop. My laptop is wireless and my desktop is wireless.I recently got my desktop back from repairs, and it has a new motherboard, with a clean instal of windows vista. I installed all the drivers ect. It says im connected to the internet, and I can access some sites. I've flushed the DNS, and called my provider. They say nothing is wrong on their end.Oh, and after ringing the repair shop, they said to install adobe and java. Java installed fine, but the adobe site wouldn't load (lol). So I copied the adobe files from my laptop over to the desktop. Youtube videos now play, but it feels slow, considering im on a 30MB download connection.
View 3 Replies
View Related
Dec 18, 2011
I have a problem on my Google Chrome explorer that if for example I am going to [URL] so every time I am clicking in a link (no matter what... some friend's profile, or friend's pictures...) I see only the blue Facebook bar on top and that it. So if I want to page to load perfectly I need to mark the address and click enter, and then the page loads perfectly.
An I need to do this any time I am entering any link. And it's not only on this site. it's also some others sites includes Twitter.
I tried to see if the problem continues in other explorer like firefox and IE, but not... it works perfectly there!
View 3 Replies
View Related
Dec 25, 2011
my netbook shows it is connected, but won't open to any sites
View 1 Replies
View Related
Dec 19, 2011
Loading yahoo page on windows 7.
View 1 Replies
View Related
Apr 11, 2011
Ok starting about an hour ago I seem to be having a problem accessing youtube as well as Facebook & now Microsoft?I have done some searching around and tried a few of the suggestions I found including; trying another browser (happens using both Mozilla and IE), clearing internet cache, unplugging my modem for a minute then plugging it back in, etc, and so far none of these have worked. I did get youtube to work once since then long enough to upload a 10 sec video but once it was uploaded and I tried editing the video details I once again found myself taken to the page that says The connection was reset.
View 3 Replies
View Related
Jan 31, 2011
I am trting to test multicast between two sites connected over WAN...SIte A is connected to Site B with DS3 link with ethernet output.The DS3 link is connncteted between cisco 2851 router at each end.At Lan SIde Cisco 2851 router is conncted to Nortel-8600 Switch over ethernet connectivty at both end.PIM is enabled on Nortel-8600 core switch with Sparse mode and multicast is working fine within LAN.Same is the result for both sites.
Now we are trying to make multicast work over wan in which PIM is enabled on both lan & want interafce of cisco router with sparse mode and multicast is enabled globally...now both the routers are making neighbourship with respective lan switches and with each other but multicast traffic is not flowing.In cisco router Mroute is not coming for the multicast group defined in core switch.
View 7 Replies
View Related
Apr 18, 2012
Our client has MPLS connected all sites. Each site has a router connected to MPLS via serial interface, and connected to the switch (6500) via ethernet interface. There is QoS applied on the serial interface for outbound.
It appears there are lots of inbound traffic coming to the site, and the client applied QoS on outbound.What I learned that after the packet are marked by the CPE, the ingree Provider Edge Router (PER)uses these marking to map flows to various Label Switched Paths (LSPs) providing differentiated treatment accross the network. Then at egree, the PER applies queuing policying based on the CPEs orginal DSCP markings to properly allocate bandwidth on the egrees link during congestion. My guess we really don't need to have inbound policy applied in the serial interface on the router, am I correct?
The serial interface has 1.5 MB, and the goal is we want to have 1 MB for cirtical apps, and 0.5 MB for download/upload internet access. If we apply this policy on the switch, A) should I apply it on the VLAN interface or the port connected to the router?
View 6 Replies
View Related
Feb 23, 2011
I have 3 sites. Each site has a Cisco 1841 as its WAN router with a 10Mb direct internet access circuit connected to Fa0/0. The sites are then connected to each other via site-to-site IPSEC VPN. (The LAN switches in use at each site are Cisco 3750 series) [code]
Now, Site A has already been set-up with VoIP telephony. The plan is to extend this to the other 2 offices.Auto QoS has been set-up on the switches and data and voice VLANs created in the same way for each office.
how should/do we extend the QoS for the voice over the WAN to ensure voice quality remains for site to site calls. And what special considerations do we have to make for it being IPSEC VPN connectivity between the sites? The actual IP telephony system itself is being set-up by a 3rd party and not a lot of information on their requirements has been forthcoming so far – essentially all we have really been told is that they would like us to “reserve” a certain amount of bandwidth for the voice traffic between each site.
View 3 Replies
View Related
May 3, 2013
One of the customers has deployed Cisco 7609S in their infrastructure for Branch/RO connectivity. When we tried to configure per-tunnel QoS with DMVPN for MPLS connected sites, we came to know that Cat 6500 and Cisco 7600 series routers don't support this feature.
Now, we are looking for suitable replacement of Cisco 7609S. I found a document for configuring above feature on Cisco ASR 1000 series routers, but it has many restrictions always.
We are now looking for
(a) suitable platform in the league of Cisco 7609S which support above feature.
(b) suitable technology replacement of DMVPN with minimum restrictions.
View 1 Replies
View Related
Aug 6, 2011
I've had this problem with my parents internet for some time now, but it's getting gradually worse. It goes through stages of being connected to the internet but won't load web pages. The error messages are;
On Firefox: "The connection to the server was reset while the page was loading"
On Chrome: "The connection to www.example.co.uk was interrupted"
But my computer still says it is connected, and indeed some downloading still works even though web pages won't load (i was able to download the 'Settlers 7' demo from bittorrent and the full game from steam uninterrupted)
ISP is Post Office Connection is DSL Up to 3 computers share this connection, 2 connected by wireless and 1 by LAN. I used to believe this problem affected all 3 computers simultaneously, but now I�m not sure
==============================================================================
C:UsersHal>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Hal-PC
Primary Dns Suffix . . . . . . . :
[Code].....
View 10 Replies
View Related
Feb 23, 2011
runs fine till i get on youtube then plays a peice of video then dissconects and reconnects and video will not play
View 1 Replies
View Related
May 21, 2013
Has anyone configured Layer 3 port channel on Cisco 6509 switches which are connected over dark fiber between two buildings?
View 3 Replies
View Related
Apr 19, 2012
I've had this problem for a few months now , I got bt infinty in and the engineer came set up my laptop up and whatever else he had to so (i wasnt there just my daughter ) i came home tried my laptop working and connected no problem , my internet tv was working ok and all the smart phones connected and worked ok but my daughters samsung n130 netbook connected wireless no problem but when you load up her home page using any of her browsers ie, chrome & IE it comes up then when you try to go to a web page nothing happens on chrome it says error 105 , now ive tried everything myself and by doing some research myself it seems its got something to do with the DNS but i dont know how to fix it im really starting to crack up ive seen on other forums about people having the same problem but no one seems to have an answer to it or its very complicated to understand
View 14 Replies
View Related
Aug 15, 2011
I am having a problem with my computer and the internet. I can connect fine and pull up pages but after a while the pages will stop loading. Sometimes it is within a few minutes of using the internet or sometimes it will go a few hours. When I check my connection it shows that I am connected. I have tried troubleshooting, updating IE, trying firefox. Nothing works.
I have a HP G72 Notebook PC Windows 7 IE 9
View 4 Replies
View Related
Jan 4, 2012
im at university and im trying to get connected with their wifi. When i start up the computer it says that I am connected but when i try to access the internet it won't load. I have tried doing a virus scan and i have tried using other browsers but i still can't figure out how to fix it. Also, it works when I plug an ethernet cable into the wall but as soon as i take it out it stops working.
[code]...
View 2 Replies
View Related
May 8, 2012
Samsung N130 and all. But the strange thing is that I havent had any problem whatsoever connecting to any wireless internet before yesterday. I couldnt connect and wasnt sure if it was my laptop or if it was the server in the building or something... but when I came to visit my mom later in the day I brought my laptop to test and it woud connect to her wifi... I could go to Google.. I can search but I can't go to any other website.It is extremely frustrating. Especially because I need internet for my job and up until yesterday the N130 was more then doing the job.[CODE]
View 7 Replies
View Related
