Connected To Linksys Router But Internet Will Not Load?
Oct 27, 2011
I'm currently writing this from my fiances house, due to the fact that my internet is currently not working. I'm not sure what happened, but yesterday afternoon, all of the sudden, I couldn't load webpages. I went and power cycled the router and modem and everything, still nothing works. It says I am connected to it and the Internet, but webpages will not load. I'm a little confused because the program Skype was working, but nothing else was. Any idea how to fix this? I don't have any information from the computer such as IP configuration or any of that since I am not at home. The router is connected to a desktop PC running Windows XP, and it is wirel
Recently I have been having problems with my computer. For some reason It says that it is connected to the internet and will work for a few minutes, but then suddenly stop working yet still say it is connected to the internet. I have looked around the forums for things like this and I haven't found a fix yet. What I do to get internet is to swap between the 2 wifi signals in our house. I am the only person in my house who uses PC. The rest of my family uses mac, so we have mac routers. I have an asus N53J. [code]
I've been having this problem for around two years on my current laptop, but today it finally got so frustrating I had to ask about it. I've tried and tried to search for others with a similar problem, but have never found a good solution. When my computer turns on and connects to an internet source (LAN or wifi), it will work fine indefinitely. However, if I join a different LAN or wireless network later, such as when I go from home to school, it will connect to the new network, but after a few minutes, I will be unable to load any web pages (Connection timed out).
Skype and email still work fine, and the only browser I use is firefox, so this may be a firefox-specific issue. If I reset the network adapter being used, then I will be able to load websites again, but after 2-30 minutes, I will run into the same issue and have to reset the adapter again. Joining a different network does not resolve the problem. Restarting firefox does not resolve the problem. Clearing the firefox cache is a temporary solution only, similar to resetting the network adapter. Restarting the computer entirely will result in no connection problems, until I have to change networks again.
Specs are below, and again, I connect to the internet using firefox 14.0.1 Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz, Intel64 Family 6 Model 30 Stepping 5 Processor Count: 8 RAM: 4030 Mb Graphics Card: NVIDIA GeForce 310M, 512 Mb Hard Drives: C: Total - 464783 MB, Free - 133483 MB; Motherboard: TOSHIBA, Portable PC Antivirus: Microsoft Security Essentials, Updated and Enabled
My Internet is connected as I can load pages through my iPhone on my wireless signal BUT on my laptop the only page that will load is my UniSA home page and my Uni email - nothing else will load - I have tried Mozilla, IE & Safari and get the same response with all of them. Don't know if I have accidentally done something or what?
I use my android as a mobile hotspot to connect to the internet on my laptop. My laptop says it is connected to the internets.d has a strong connection but will not load any page on internet. I use my mobile hotspot to connect to the internet on other devices and it works great. I am using windows 7 operating system and internet explorer for my browser.
I am having trouble with my wireless connection. I am only able to visit websites but if I try to use the internet for anything else (AIM, Yahoo instant messenger, etc), it will not work. This is not a modem issue because my other computers' connections still work fine.
I am having trouble with the internet on my HP laptop.. I am positive it is connected to the internet, yet pages won't load.. when I troubleshoot it says no problems detected
IE and Firefox both refused to load my homepage (google) or any other page in my bookmarks. Uninstalled and reinstalled both, even going back a couple of versions and still nothing. I know I'm connected as my iPhone works fine. With this in mind, I tried opening up safari to see what that would do and to my supprise, it works fine, bit slow but still, at least it works. So now I defiantly know that the Internet is working.
I have done so much research and tried almost everything on these forums, but still the internet wont load on my laptop. It is a Acer mini with Windows 7 starter. The other day the internet just stopped loading pages. It shows that it is connect to my router, and when I try to go to a page, it just says loading. I tried to connect with the ethernet chord from the modem and it does the same thing. I think there is a connection, but just wont load pages because the avast will update the virus definitions. I've tried to update the drive, reset the ipconfig. One thing I noticed is that the ip6v says not connected but the ip4v says internet. If I can do anything to get more info I surely will post it back up here, I just need to get my connection back up
My computer (running windows XP and connected to the internet with a D Link USB adapter) refuses to load any webpages: despite showing full signal strength and connection in both the D Link settings and the windows XP wireless panel.I am able to ping websites and other computers in the house (all of which are able to access the internet) but no pages load in any browser I try.
She has an older HP Vista laptop that connects to the internet just fine (including downloading updates, connecting to messenger clients, etc.), but it will not connect to any of her browsers...
1. I understand firewalls can throw huge issues, I am pretty sure this is where the problem lies. She was using Ad-aware and I am pretty sure that the window that popped up that she clicked switched her firewall settings back to default and left something weird in the system. When I try to disable Windows firewall and go back to Ad-aware it won't let me exit snooze. It asks if I confirm and when I do nothing happens.
2. I have done a winsock reset and made sure that the proxy boxes are unchecked to make sure there isn't a proxy problem.
3. The ipconfig/reset threw no errors, everything looks fine.
4. No hardware conflicts or errors reported in device manager and all drivers are up to date. Again since the internet is actually working minus the browser I don't think it is a hardware issue.
5. No virus detected. Symantec is loaded on the laptop did a run with that, also have AVG that I installed and ran (disabled one and did the other, never run simultaneously). AVG is now uninstalled as Symantec is disabled to avoid any conflict with AdAware.
Is there any way to completely disable all firewalls, remove any settings or registries (if any), and start from scratch with it? Also, as networking is by far my weak point, is there anything I need to check as far as the DNS is concerned?
i have a adsl modem tp link td 8840, and i had this up and running well for about 3 days. then we decided to get a router cause my little sis got a ipad2.the router is dlink dir 61.so basically i followed all the instructions and the internet was working fine.then for some reason ign site stopped working, i thought that it was down for some reason and didn't think much of it and today when i tryed to go into hotmail or facebook it doesn't work either. so i can get into the log in pages of both, but when i put in the id and password, the screen goes blank and just says waiting for .... on the bottom (using google chrome).and it never loads.i tryed with other internet browsers and it din't work so i took out the router and re wired the adsl modem only and voila. all the sites started working again.i want to use my router but i don't know why i can't acess some sites when i have it connected.
I bought I router today, Linksys E2500 and set it up, for some reason its connected with full strength but the internet does not work on my computer, or any other device connected to the network I established on the router. I've looked through so many articles and posts on here, I've fixed the winsock, I tried the netsh winsock and the netsh int ip reset reset.log, but when I put in netsh int ip reset reset.log in the command prompt, nothing happens after I press enter. I've updated through microsoft updates, and updated some drivers from the hp website. Ive repaired, and tried restarting the router, and even the modem and nothing changed. It's still connected, but the interenet still is not working. The modem is fine, as when I disable the wireless connection, the internet works. Yes, I have Sp3 installed.I am using windows xp and the computer is called HP Pavilion a1013w Desktop PC. [code]
I'm connected to the internet with a bullet M2 and when I connect directly I have internet access. When I connect my linksys 160n router and plug in my computer I show a connection but can't access the internet. I can ping the bullet and my computer from the router and get a response. I've also borrower a wrt54g router from a friend and have the same problem, The bullet is in bridge mode. My computer is running xp pro.
Linksys Wireless router connected but no access to the internet. I do not have a modem in my flat from ISP, only a cable, since the internet is set for every apartment in the building. I have a username and password that I use to connect. There is no problem connecting with the cable. I set up by Belkin wireless router and I'm actually connected to internet wireless but it only works if I also enable the primary ISP connection on my computer so my laptop is connected to internet without a cable. But this weird connection does not allow me to connect my phone to wireless or any other computer. Also the router settings site says not connected to internet and the internet light on Belkin is off.I have a Slovenian ISP -Amis, cable connection and Belkin Wireless modem, Avira Free antivirus.
So, I restarted my linksys router (WRT54G model) yesterday because of some issues I was having. Right now, I have full bars for connectivity on all my devices (Acer Aspire laptop running Windows 7 starter) when the Ethernet cord is connected from the modem to the router, but I have no internet access. Only when my laptop is connected directly to the modem, I have access to the internet (but ofcourse no wireless).
Well i recently purchased a Linksys e2500 router,so i connect it to my modem and then to my PC, all by Ethernet cable(no wireless) as i want my pc connected by cable, i go through the set up CD and it finishes and says you are now connected to your router but..... not to the internet and it tells me to restart the modem with i have done, i have also tried power cycling modem, router and PC, but i still get the same old problem and when i go in network connections my local area connection says i am connected but it wont let me use the internet. also above when i have been trying to set up the router this "Internet Gateway" pops up in my network connections and it is disabled and whenever i try to enabled it it just says failed.
I'm on Cable broadband my modem is a Motorola SB5101 SURFboard cable modem and the router is an Linksys Cisco e2500 and i am using windows xp sp 3
I am havng a problem with my WRT54G v5. I have 2 laptops that cannot connect to the internet using wireless. I connect them to my home lan using wireless and look at files on other computers but no internet. When I connect the laptops using ethernet they both access the internet fine. I also have 3 desktops (using ethernet) which work fine. I have tried the followingTurning off wireless security and laptop wire wallsDownloading latest firmwareChecking TCPIP settings Using a WRT54G v6 router - same problemIpconfig shows connection to the router at 192.168.1.1 and an address of192.168.1.100. I can ping 192.168.1.1 successfullyMy internet provider is VerizonThis worked at one point in time (May) but has not worked since June.
I went to set up a passowrd on the my WRT54G. I actually clicked SES and pretty sure i pressed reset security. Does this reset the router to factory default? Or the security settings to factory default?I didn't save after realising that I had done wasn't going to change my password.Now I can't access the internet. I have tried everything, resetting, restarting, waiting, banging my head aqgainst the wall.I have another router, an E1000. This will not connect either. internet works fine when hardwired to the modem.
I bought a cisco 881 router exactly like the one I had . It was configured the same way but cannot get connected to internet.The new router settings do not have an NAT on it, my IT guy turned it on through the console port and we till cannot get it to work?
I connected EA6500 internet port to actiontec router provided by Verizon fios. I don't have any other way to connect as FIOS connection is coax to actiontec modem. I must take a drop from actiontec to internet port on EA6500.
With that said, I can't get EA6500 to work, it keeps saying no internet. The only way I can get it to work is when I set it to bridge mode. This makes my EA6500 a dumb switch/access point. I didn't spend $200 for a switch. I need to use advanced features offered by this router but I can't until this problem is fixed. I made sure I am running latest version of firmware (1.1.28.146856).
I have reset my fios router as well as ea6500 to factory defaults multiple times.
I have a hardwired HP computer with no problem connecting. The remainder of my wireless devices will not access internet. No problem until about 3 weeks ago then all of a sudden it stopped. All wireless devices detect the router/network, but will not allow access to the internet.
I recently moved into a new place and while unpacking I found my Linksys WRT54G router and I am currently trying to set it up to I can connect to it wirelessly. I am able to access the administrative settings fine, and have got it to finally connect to the router, but there is no Internet connection, nless I am hardwired into my cable modem. I dont believe I have the software installed on this computer and I cant seem to find a place to download it even on the Linksys website, and the firmware is probably in bad need of updating.
I have a Linksys E1000 device that is connected to a DSL connection through a modem. I have a Laptop that is wirelessly connected to the router and a PC that is connected via cable. Lately, a problem started to occur where the router keeps losing the internet connection and Laptop tell me that it connected to the router but there in no internet access and the same thing happens to the PC, both disconnect at the same time. I called my ISP company when this happens and they told me that the connection is working fine and everything look ok from there. I connected my PC directly to the modem and it worked fine so problem is not from modem. When i go to the router settings at the moment this occurs, it shows that all IPs are 00000 and status is "Connecting" and then it connects and changes to "connected" and everything fine till like 15 minutes later where this happens again (sometimes, it actually disconnects again after like 15 seconds!). I took the router to the dealer and he examined it and told me there is nothing wrong but he updated the firmware and told me to try it but same thing so he exchanged it for a new one and problem is still there!
i have a WRT54G2 and i have it plugged in. i want to avoid downloading things but i had this thing working a month ago, it says its connected but no internet connection.
I've looked through the forums and FAQs and haven't seen anything that resolves my issue. I recently moved from the US to Japan. I had my WRT54GS set up in the States and the network worked fine. When i got here, i set it up, hard reset the router and set up a new network.
I can access the internet when connected through the router via ethernet cable, but I cannot connect any of my wireless devices. Easy Link Advisor says "internet connection is not working" but it is. I have two computers connected via cable and they both work so it is not an issue of my ISP allowing multiple IP addresses.
My wireless devices (XBox, PS3, laptop) can see the network but cannot connect through to the internet. I also just noticed that the "wireless mode" according to the EasyLink Advisor says "disable", however the wireless settings on my 192. server webpage is set to "mixed" and seems to be correct in all settings to be on.
When my ea4500 is connected to other router with internet connection I can access CCC. But if ea4500 connected via pptp to internet by itself, i cannot use CCC because router tells 'no internet connection', even if I have this connection. How to fix it?
I have am unable to access the Internet via my modem and router. My computer recognized the connection from my router. My modem is a Motorola 12DVC. My router is a Linksys Broadband Wireless-B BEFW11S4 version 4. I tried several things, including changes via 192.168.1.1. I am using an AT&T DSL connection. The router has only been used one time.
Here is some other information:
Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:Documents and SettingsJim>ipconfig /all
My E3000 has been working fine with 1.0.04 build 6 FW. Recently some devices (kindle, iPad) can't connect to internet while connected to E3000 via WiFi network. Had a look my E3000 router IP is 192.168.0.1 but those problematic devices has IP 192.168.1.XXX allocated by DHCP not sure why. Currently I manually set up static IP 192.168.0.XXX for those devices.
I have 3 laptops connecting wirelessly to this router. One is running at 18Mbps, the other two at 0.4Mbps. the internet setting are the same and the security is the same (WPA2-Personal with AES encryption). One of the slow computers is brand new and WAY faster than my "fast internet" computer. The other is about the same as the "fast internet" computer. I updated the I connected the new computer to the router tusing an ethernet cable and it had superfast internet. I redid the Cisco connect on each computer, but it didnt change anything. Why is it so slow wirelessly?
I have recently switched to fibre optics and I have decided to reuse my Linksys E4200 that was previously used with a cable network. However, After installing the router using the disk provided I was unable to connect to the internet even though my computer was able to connect with the router. What can I do to solve this prob. I have tried restarting the modem to the factory settings and the same problem recurs.P.S. The modem was installed to another router provided by my service provider.
