When my ea4500 is connected to other router with internet connection I can access CCC. But if ea4500 connected via pptp to internet by itself, i cannot use CCC because router tells 'no internet connection', even if I have this connection. How to fix it?
View 9 RepliesI have my USB HD mapped on my PC through my EA4500 router but, it will not connect automatically because, I think, it needs a password. (If I "explore" the mapped drive, it asks me for a password, then connection is fine, until my PC is rebooted.)Is there anyway of getting around this without leaving my HD unprotected? I am using the Smart Wi-Fi software for the router.
View 6 Replies View RelatedI now have a shared drive shortcut on my desktop from the external drive I have hooked to the EA4500. Is there a way to share this folder to Android phones or Ipads? Looking to backup my phone data to the share (photos)
View 2 Replies View RelatedI have an EA 4500. Tonight I was trying to see what devices were connected. The window shows 0 devices connected, although about 20 devices are connected and working. When I click on "Devices Connected", I get the spinning wheel, and after multiple attempts by the application to list devices, I receive a message that the application does not work. I have the latest firmware installed. This is a recent issue. I have not made any changes to network configuration, nor to any of the devices that all have internet access. I will note that I did not set up a separate SSID for each band. But that did not seem to be an issue in previous months. I also cannot access the router ui from my windows 7 desktop. I can access the abbreviated ui through my Android phone. I tried connecting through smart wi-fi and by ip of the router. I just get the endless spinning circle of dots. I am running Windows 7 all up to date. All drivers are up to date.
View 7 Replies View RelatedMy EA4500 with the latest firmware will only display nine connected devices at a time. It also seems to randomly shuffle which devices to show as connected, even though several more than nine are connected and online. Does anyone else's device list limit itself to displaying only nine devices? The Linksys phone apps also display a maximum of nine devices. I like the routers new user interface and understand that it has received a lot of praise, however this is the second bug I've experienced in as many months (the first being a failure of the device list to update once devices are upgraded to Windows 8, requiring a reset to default settings in order to fix).
View 5 Replies View RelatedMy router EA4500's Cisco Logo is Blinking and not connect with any device
View 5 Replies View RelatedTransfer speed for sending or receiving files from a USB external HDD connected to the router is slow? Speed ranging from 2MB - 4MB/s. The HDD is definitely capable of at least 80MB/s if plugged directly into the PC. Is it meant to be this slow or there's a fix somewhere which I'm not aware of? Thought it's suppose to be the top of the line products but seems so inferior if I were to compare with other high end routers in the market which performs better, faster and definitely much cheaper.
View 9 Replies View RelatedI have several devices connected to my Linksys EA4500. Two of them are my Apple Mac Pro and my Logitech Squeezebox Radio. For some reason, in 'Device List', my Apple Mac Pro has the manufacturer 'Logitech' and the model 'Squeezebox Radio'. As for my Logitech Squeezebox Radio, it doesn't have a manufacturer nor a model. It appears that there is a mix up with these two devices. I have cross checked the IP addresses and MAC addresses displayed in Cisco Connect Cloud with those displayed on the devices and they match - so it's not a case of mixed up names. Could this be an issue with Cisco Connect Cloud?
View 1 Replies View RelatedI currently have a RV220W connected over PPTP to the internet. I want to connect with an RV042 with a fixed IP Address.The connection is working, but I always have to add a static route to the remote IP-Adress that I can transmit data.Since my own IP Adress is a dynamic one that changes every day I have to enter every day in the static route as gateway adress the new WAN IP Address.
View 4 Replies View RelatedAfter upgrading two laptops to windows 8, they will no longer appear as a connected device under the "device list." They both access the router via wifi and wired, but neither appear in the device list any longer. I've rebooted the router twice, as well as both computers, disabled/re-enabled their wifi connections, but no effect.Every other non-Windows 8 device still appears normally under the device list.
View 3 Replies View RelatedI recently purchased an EA4500 Cisco Wireless Router. I installed the software from the setup CD, however I cannot access the internet. All my devices (Iphone, etc) can access the router but the router cannot access the internet. Mac OS X 10.6.8
View 1 Replies View RelatedHow to access their router using Safari on a Mac or an iPhone or an iPad? Â A few weeks ago, Linksys was aware of this as an issue and I wonder if anyone has been successful using these browsers.
View 9 Replies View RelatedI have a CISCO modem from SHAW set as bridge. I recently bought a CISCO EA4500 which got automatically upgrade to the current Firmware 2.0.37 after connecting it to my ISP. After a few days I noticed my internet speed was slow. When I checked the router I saw it flipped from 1Gb to 100Mb. Called Shaw they could not figure this one out, while waiting I decided to turn everything off / on and internet port came back to 1Gb. 2 days later same thing again, I just turned off both the modem and EA500 router. Â A couple of days later again same problem but this time I just turned EA4500 off/on and internet port came back on with 1Gb.Otherwise I will have to turn this one back in to the store for an exchange.
View 9 Replies View RelatedI am looking to track what my kids are doing on the internet. I have an ea4500 and was wondering if there is a detailed log file that I can look at?
View 3 Replies View RelatedI am using an EA4500 with the latest firmware that support the Cisco Connect Cloud. I am connected to the Internet and I need to edit the Internet settings and select a different internet setting: Static IP from the current setting DHCP. I select the option from a drop-down menu after selecting Edit, but there is no edit and no drop-down menu.
View 9 Replies View RelatedI have an EA4500 router. It's the latest in a long line of Linksys routers I've owned and I'm pretty familiar with setting one up and making changes. But the EA4500 seems a bit more picky than previous routers. Last night I tried to enable port forwarding for ports 53, 80, and 88 for my xbox. I already had port 3074 forwarded. When I did that and applied the change, I lost all Internet connectivity. I tried cycling the power on the router with no luck. I finally got connected again by going to 192.168.1.1 and disabled those ports. The status page then said I had Internet connectivity but I really didn't at least right away. It took a couple minutes before I was actually able to to connect to the Internet again. What else should I check when it says I don't have internet connectivity?
View 3 Replies View RelatedI am only getting 10-14 mbps when I should be getting 30-35 (using the gigabit ports). I thought it might be my provider but today I connected my old netgear router and the speed was 32-34 mbps. Is there some setting that I should be looking at?
View 5 Replies View RelatedI own a ea4500 wireless router, I have tested the speed at speedtest.net and wirelessly I get around 9 mbps. My speed is 23 mbps when I hard wired the pc. I have check the speed on a tablet ( android ), pc and a mac to about 5 feet away from the router with no walls or anything between the two devices.I have checked all the settings but I don't see anything wrong, I have changed to N mode only to make sure I use top speed.All my devices are able to use N.
View 3 Replies View RelatedI bought a EA4500 to replace my old WRT54G earlier this year. At first the router worked fine. After the automatic firmware upgrade to Cisco Connect Cloud, I was never able to get the Connect Cloud stuff to work, constant 500 Internal Server errors when trying to access the router with the Internet cable attached. Â So I downgraded back to the old firmware and all was well again. Then I started having problems a few months ago, when I would wake up in the morning, the router would be cycling the Internet port on and off. I could usually reboot everything and it would work the rest of the day. I lived with it like this a while, and support couldn't seem to find anything wrong. Eventually it started getting worse, until the point I could hardly ever get it to stay connected. I got Cisco to RA the old router and I figured problem solved. Now while the EA4500 was gone, I used my WRT54G again, and everything worked fine for nearly two weeks while I was waiting on the replacement EA4500.
So today the new EA4500 showed up, I connected and configured it, and it worked for a short time. Then suddenly I lost Internet, looked up at the modem and the LAN light was going on and off every few seconds. So I'm back in the same boat as before.I've tried changing cables, same setup works fine with the WRT54G. Modem works fine with WRT54G and connected directly to the computer, zero problems. I tried lowering the MTU, turning on MAC address cloning, and various other things.My modem is a HughesNet HN9000.
In 'Status' on my router there is a green dot in the field below 10/100 mbps at 'Internet port speed' - shouldn' that dot be below 1 gbps?
View 1 Replies View RelatedI was using the Sony Tablet with an earlier version of a linksys modem and everything worked fine. Since changing to the 4500 I have access to the network have full internet service and the anywhere from about 5 to 10 minutes later the internet freezes on the table and I have to reboot connection and the its fine for about another 5 to 10 minutes before it freezes again.
View 6 Replies View RelatedGot the cisco EA4500 router, installed it and ran the set up disc. It downloads whatever it needs to download, then proceeds with a progress bar all the way to 100. Then it tells me my internet cable is unplugged, but I able to browse the intrnet, like now. It tells me to plug it in and hit next, I hit next and it eventually gives me the same message. I've tried unplugging my modem, resetting the router etc. But when trying to run the disc when it gets to that point it always tells me my internet is unplugged? I can even browse the internet while that message is up.
View 9 Replies View RelatedThe issue is that one Dell laptop is experiencing slow or no internet connectivity at all using wireless. Sometimes 1 to 2 minutes to load a page, other times the dreaded 'not able to display webpage' message. It's fine using Ethernet. I have another laptop (same exact brand/model) and it has no problems. I also have a Macbook Pro and other Apple IOS devices (iPod/iPads) that are fine. Several Ethernet connected devices are fine as well. The laptop in question had no issues with my previoius Linksys devices, which are a BEFSR41/WAP55AG as well as a WRT-54GS v2. This one laptop was fine the first day or two on the EA4500 but something happened which is causing this issue. I had to add the WAP55AG back onto my network so my son is happy again, but my plan was to decommission the other devices. EA4500 Firmware v.2.0.37Dell Inspiron 15 Notebook w/Intel Centrino Wireless N1030, 1x2 bgn (2.4 GHz) + Bluetooth
View 2 Replies View RelatedI have recently purchased an EA4500 router. I assigned my sons XBOX a static IP via DHCP reservation (outside of the standard DHCP range). I set up single port forwarding on all the standard xbox required ports. Once I click the "enabled" box, I am unable to access the internet from any of the computers connected to the router. If I uncheck the enable box, I am instantly able to access the internet.
View 4 Replies View RelatedMy EA4500 is not working. The power indicator light is on but the green and yellow lights on the Internet port are not flashing and the modem the EA4500 is connected to show no activity on that port. Also, the EA4500 is not broadcasting so I can't even connect to it to use Cisco Connect to troubleshoot. I tried resetting it but it did nothing. This has happened before but is usally fixed with a reset.
View 8 Replies View RelatedI've bought the EA4500 and configured it to connect to internet. it works fine.however, one day after it, it can't connect to the internet anymore. I go to the router setup page and try to manually connect it to the internet, but it keeps "connecting." I then restore to its factory configuration, then do the configuration again and it can successfully connect to the internet.however, one day after it, again, it can't connect to the internet anymore.
View 2 Replies View RelatedEA4500 Linksys router stopped allowing vizio Internet apps to connect from two different TV's. Problem, Just got brand new EA4500 router and Motorola SURFboard DOCSIS 3.0 High-Speed Cable Modem Model: 575319-019. I have 2 new vizio big screen tv's with internet apps. All was working fine and had no problems but occasional drops or limited access.
Â
One day BOTH TV's could no longer connect. However, The tv's will connect to another access point. therefore the problem does not exist in the TV/s and has to be a problem in my access point (I.E. Router allowing access). Additionally, all other devices connect and work fine. I have already unplugged everything for an extended period of time. Checked for updates on firmware and verified no software needed to be updated. Rebooted router... Am using wpa-psk and feel i shouldn't have to go weep as it was working fine...
This is my second post today trying to fix the NAT types for my 2 xbox 360. I tried the port forwarding method but with this router when I enable the ports I lost internet access in my wired devices but my wireless devices still have internet access. I even lost internet access on my computer. I never had manu problems with a router trying to get my NAT type open on my 2 xbox.
View 6 Replies View RelatedI've got a problem with my new Linksys E1200 (v1) router. It cuts the bandwidth of my PPTP connection with ISP (which is 50 Mbps) down to about 12 Mpbs. My firmware is the latest one (v1.0.03 build 4). I've done some reading and found out that it's pretty common problem between Linksys E-Series routers and ISPs that use PPTP/L2TP.
View 4 Replies View RelatedI setup my Windows 8 desktop for a PPTP VPN server so I can connect my iPhone 5 to it.Using the Cisco Connect Firmware, as I was having internet speed issues with the Smart Wi-Fi Firmware and I wasn't loving the interface of the Smart Wifi Firmware anyway.According to the router the firmware is up to date. All three VPN settings are enabled.PC is set to a static IP internally. 192.168.1.116 to be precise.PPTP port forwarding (1723) is set to the PC's static IP, though I have tried without port forwarding and it didn't work either.If I have my iPhone connected to the wireless network and point it to the internal IP address of the PC, I can connect to the VPN.If I bypass my router and hook my desktop directly to the modem (and point my iPhone to the IP that gets assigned to my desktop from my ISP) I can connect to the VPN.But if I have everything hooked up normally and try to connect to the VPN from my iPhone (using the IP address my ISP assigned to the router), I get a PPTP server not responding error.
View 3 Replies View RelatedLinksys Wireless router connected but no access to the internet. I do not have a modem in my flat from ISP, only a cable, since the internet is set for every apartment in the building. I have a username and password that I use to connect. There is no problem connecting with the cable. I set up by Belkin wireless router and I'm actually connected to internet wireless but it only works if I also enable the primary ISP connection on my computer so my laptop is connected to internet without a cable. But this weird connection does not allow me to connect my phone to wireless or any other computer. Also the router settings site says not connected to internet and the internet light on Belkin is off.I have a Slovenian ISP -Amis, cable connection and Belkin Wireless modem, Avira Free antivirus.
View 3 Replies View RelatedLinksys Wireless router connected but no access to the internet?
View 19 Replies View RelatedI am havng a problem with my WRT54G v5. I have 2 laptops that cannot connect to the internet using wireless. I connect them to my home lan using wireless and look at files on other computers but no internet. When I connect the laptops using ethernet they both access the internet fine. I also have 3 desktops (using ethernet) which work fine. I have tried the followingTurning off wireless security and laptop wire wallsDownloading latest firmwareChecking TCPIP settings Using a WRT54G v6 router - same problemIpconfig shows connection to the router at 192.168.1.1 and an address of192.168.1.100. I can ping 192.168.1.1 successfullyMy internet provider is VerizonThis worked at one point in time (May) but has not worked since June.
View 8 Replies View Related