Linksys Wireless Router :: EA4500 Incorrect Manufacturer And Model For Connected Device

Sep 14, 2012

I have several devices connected to my Linksys EA4500. Two of them are my Apple Mac Pro and my Logitech Squeezebox Radio. For some reason, in 'Device List', my Apple Mac Pro has the manufacturer 'Logitech' and the model 'Squeezebox Radio'. As for my Logitech Squeezebox Radio, it doesn't have a manufacturer nor a model. It appears that there is a mix up with these two devices. I have cross checked the IP addresses and MAC addresses displayed in Cisco Connect Cloud with those displayed on the devices and they match - so it's not a case of mixed up names. Could this be an issue with Cisco Connect Cloud?

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: EA4500 Cisco Logo Blinking And Not Connected With Any Device

Jul 19, 2012

My router EA4500's Cisco Logo is Blinking and not connect with any device

View 5 Replies View Related

Linksys Wireless Router :: Ea6500 - Smart Wifi Device List Incorrect

Feb 27, 2013

The smart wi-fi app Device List indicates Local Network = 0 (that's incorrect) and Guest Network = 0 (that's correct). When i click Connected Devices for My Network, i see a list of devices but everything indicates 'Offline' and that of course is incorrect.How can i upgrade this software? I recently installed EA6500 and due to being slow, it was recommended to set back to factory default. That process did no go well, so i hope it is not necessary again. This router is not any better then the wrt320N so i am disappointed.

View 7 Replies View Related

Linksys Wireless Router :: EA4500 Not Showing Up In Device List?

Nov 27, 2012

I have an EA4500 and am using Cisco Connect Cloud software. Its working mostly fine except that I have one device on the network that will not show up in the device list. This is not an issue in itself and normally I would ignore (although it used to show up when I forst got the router) however..
 
The device is a WDTVLive media unit and required access to windows shares on a media server. Now the WDTVLive device is server an ip address by the router and is available from everywhere on my network but every couple of days it loses the capacity to search windows shares.
 
I know what you are thinking and I initially thought the same, this is an issue with the WDTVLive box. However one day I spent a few hours trying to resolve (Am an IT Consultant and know a little about networks) and found that I could not fix the issue. I then rebooted the router and it started working. I have since confirmed that every time it breaks I have to reboot the router.

View 7 Replies View Related

Linksys Wireless Router :: EA4500 - Unknown Device On Network

Apr 9, 2012

I recently purchased a Linksys EA4500 Dual-Band N900 Router with Gigabit and USB. Everything set up great with no problems and after a day or 2 I managed to get all home devices connected (2 laptops, 2 printers, an iphone, 1 tv, 1 blu-ray, an old desktop, and a tablet). Everything was connected right and working and I installed the Linksys app on my iPhone which let me see what devices were connected and all that. Well, last night, an unknown device showed up as a connected device. It's labeled as: android_(insert string of characters) and has a MAC address. I've tried and tried to identify what this device is and I can't. Everything else on our network is still showing up independently of that device. I'm worried that someone using our connection and possibly putting our device security at risk. What can I do to A) try to identify what the device is and B) if it is an intruder, block it's access.

View 9 Replies View Related

Linksys Wireless Router :: Use USB Hub To Connect More Than 1 Hard Drive Device To EA4500?

Jun 4, 2012

Can I use a USB hub to connect more than 1 hard drive/flash drive device to the EA4500?

View 3 Replies View Related

Linksys Wireless Router :: Ea4500 - One Device Not Connecting To Wifi Network

Feb 3, 2013

I just purchased a Linksys EA 4500.I set up the wifi properly, with laptops, tablets, smartphones and printer. The wifi network worked fine for a couple of days.But now one of the laptop "refuses" to see the Linksys wifi network. The other devices are still connected and running regularly.
 
The notebook that does not connect anymore is an ACER 5740DG with an Atheros Network adapter and Windows 7 installed. This notebook is otherwise running fine.At the beginning it was connecting ok and we never had any problem at all with the previous router Belkin_N+_7991AC, that I changed just for speed.
 
Now the Linksys network is simply not visible to such notebook in the "Available Connections List" that I get clicking on the WiFi icon in the bottom right, while a number of other wifi networks (not mine) are clearly visible. Of course I restarted the notebook properly. For one time I got the visibility of the Linksys, I entered the password and then it was not possible to see the network anymore.No error message from Smart WiFi software.

View 5 Replies View Related

Linksys Wireless Router :: PC / EA4500 - Mapping USB Connected HD

Jan 20, 2013

I have my USB HD mapped on my PC through my EA4500 router but, it will not connect automatically because, I think, it needs a password. (If I "explore" the mapped drive, it asks me for a password, then connection is fine, until my PC is rebooted.)Is there anyway of getting around this without leaving my HD unprotected? I am using the Smart Wi-Fi software for the router.

View 6 Replies View Related

Linksys Wireless Router :: External Drive Connected Via USB On EA4500?

May 20, 2012

I now have a shared drive shortcut on my desktop from the external drive I have hooked to the EA4500. Is there a way to share this folder to Android phones or Ipads? Looking to backup my phone data to the share (photos)

View 2 Replies View Related

Linksys Wireless Router :: EA4500 Shows 0 Devices Connected

Mar 6, 2013

I have an EA 4500. Tonight I was trying to see what devices were connected. The window shows 0 devices connected, although about 20 devices are connected and working. When I click on "Devices Connected", I get the spinning wheel, and after multiple attempts by the application to list devices, I receive a message that the application does not work. I have the latest firmware installed. This is a recent issue. I have not made any changes to network configuration, nor to any of the devices that all have internet access. I will note that I did not set up a separate SSID for each band. But that did not seem to be an issue in previous months. I also cannot access the router ui from my windows 7 desktop. I can access the abbreviated ui through my Android phone. I tried connecting through smart wi-fi and by ip of the router. I just get the endless spinning circle of dots. I am running Windows 7 all up to date. All drivers are up to date.

View 7 Replies View Related

Linksys Wireless Router :: EA4500 Connected Via Pptp To Internet Itself

Jul 6, 2012

When my ea4500 is connected to other router with internet connection I can access CCC. But if ea4500 connected via pptp to internet by itself, i cannot use CCC because router tells 'no internet connection', even if I have this connection. How to fix it?

View 9 Replies View Related

Linksys Wireless Router :: Ea4500 - Device In Smart Wifi Is Listed With Two Multiple Apple

Jan 2, 2013

I am using a EA4500 and use Linksys Smart Wi-Fi to manage the device. In the household we have multiple Apple i devices. Somehow the Linksys Smart Wi-Fi combined two separte i devices (iPhone 5 and a 4th generation iTouch) to one user.The devices actually have different names, but the Smart Wi-Fi is combining them into one device. So I can't use Parental Controls on one of the devices.

View 8 Replies View Related

Linksys Wireless Router :: EA4500 Only Displays Maximum Of 9 Connected Devices?

Nov 6, 2012

My EA4500 with the latest firmware will only display nine connected devices at a time. It also seems to randomly shuffle which devices to show as connected, even though several more than nine are connected and online. Does anyone else's device list limit itself to displaying only nine devices? The Linksys phone apps also display a maximum of nine devices. I like the routers new user interface and understand that it has received a lot of praise, however this is the second bug I've experienced in as many months (the first being a failure of the device list to update once devices are upgraded to Windows 8, requiring a reset to default settings in order to fix).

View 5 Replies View Related

Linksys Wireless Router :: Slow Transfer Speed From USB External HDD Connected To EA4500?

Jul 3, 2012

Transfer speed for sending or receiving files from a USB external HDD connected to the router is slow? Speed ranging from 2MB - 4MB/s. The HDD is definitely capable of at least 80MB/s if plugged directly into the PC. Is it meant to be this slow or there's a fix somewhere which I'm not aware of? Thought it's suppose to be the top of the line products but seems so inferior if I were to compare with other high end routers in the market which performs better, faster and definitely much cheaper.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Non-supported Device Is Connected To USB Port

Dec 16, 2011

I'm trying to connect an Epson Stylus Color 740 USB printer to a newly purchased E4200 wireless router.  I've upgraded to the latest Cisco Connect software and to version 1.0.0.3 router firmware.  I get the message "A non-supported device is connected to your router's USB port.  Disconnect that device and follow the steps below to connect a USB printer to your router."  Cisco support was not beneficial. 

View 1 Replies View Related

Linksys Wireless Router :: E3000 DHCP Client Table Not Showing Connected Device

Jan 10, 2011

I upgraded to firmware version 1.0.03 I started to have this weird issue: I have four PCs connected to this wireless router via wireless G. They all run Windows 7 Home Premium. After a few hours I started to notice that the DHCP client table is empty even if all four PCs are connected to the internet. This causes a networking problem because one of the PC serves as a file server and it grants access by IP addresses. Not being able to "see" those computers, my access is denied.

View 2 Replies View Related

Linksys Wireless Router :: WRT54G2 - Network Connected Device Only See Local Connection / No Internet

Sep 18, 2011

I have a very annoying problem with my Linksys WRT54G2.When I connect a wireless device (laptop, phone, TV, Ipad) to my wireless network I only see a Local connection, no connection to internet. After resetting the router (power off for several seconds) the internet-connection is available again.I have to do this every 1 - 2 days.

View 7 Replies View Related

Linksys Wireless Adapters :: EA4500 Won't Display Connected Devices

Nov 5, 2012

After upgrading two laptops to windows 8, they will no longer appear as a connected device under the "device list."  They both access the router via wifi and wired, but neither appear in the device list any longer.  I've rebooted the router twice, as well as both computers, disabled/re-enabled their wifi connections, but no effect.Every other non-Windows 8 device still appears normally under the device list.

View 3 Replies View Related

Linksys Wireless Router :: Wrt54gh - The Image File Is Incorrect

Sep 19, 2012

I was using a wrt54gh which is no longer in working condition.. so i bought an E1200.the problem i face is when i try to restore my new router which is the E1200 frm the backup file frm my previous router the wrt54gh which is saved in my computer  i get the error message " THE IMAGE FILE IS INCORRECT ".

View 4 Replies View Related

Linksys Wireless Router :: E1200 Stop Working Due To Incorrect Configuration

Feb 14, 2013

I received a Linksys E1200 from a friend who careless tried to upload an incorrect configuration. After that the device became use full. It don't work at all.

View 1 Replies View Related

Linksys Wireless Router :: WRT400N Firmware Update - Incorrect File Path?

Apr 13, 2010

I have downloaded the firmware update "Ver.1.0.02 build 11" for my WRT400N from linksys.com several times. I then try to update my firmware on my router. Each time I try, I get an error message that says  "Incorrect file path."

View 9 Replies View Related

Linksys Wireless Router :: Change Old By Model E2500

Jan 4, 2013

I want to change my old router (wrt160N v3), by this model Linksys E2500.The question is, there will be a lot of changes improvements if i do this upgrade?

View 2 Replies View Related

Linksys Wireless Router :: WRT100 Model Is Compatible With Windows 8?

Feb 28, 2013

Does WRT100 model is compatible with Windows 8? Everytime I connect my laptop all the other devices drop their connection.

View 2 Replies View Related

TP-Link Dual-Band Wireless :: WDR4300 - Disabling Broadcast Of Manufacturer Name?

Mar 21, 2013

Canada
Model : TL-WDR4300
Hardware Version :
Firmware Version :
ISP : [/COLOR]

Model : TL-WDR4300
Hardware Version :
Firmware Version :
ISP : [/COLOR]

Is it possible to disable broadcasting that the WDR4300 is made by TP-Link? I want to continue to broadcast the SSID but not the manufacturer. I have looked in the various menu pages and cannot figure out how to have this happen.

View 14 Replies View Related

Linksys Wireless Router :: Incoming Connection On 80 Port Model E1500?

Aug 26, 2012

My firewall outpost detected incoming connections on port 80 and blocked them.I think that the router must block incoming connections on port 80, right? But it does not.
 
[URL]

View 5 Replies View Related

Linksys Wireless Router :: Unable To Connect Visio TV Model E3D320 To It

Mar 9, 2013

I am unable to log in to my wireless network with my TV. It worked with my old router but the EA4500 recognizes the network but will not accept the password. Even if I open up my guest network which is not secured by a password it will not connect to my home network. I've chatted with Cisco and Visio on this problem and Visio says it's an encryption problem with the router. Cisco wants me to have someone call me who charges for tech repairs.

View 9 Replies View Related

Linksys Wireless Adapters :: Best Wifi Adapter For Cisco Model Dpc3925 Modem / Router

Apr 16, 2012

have received an Cisco Model DPC3925 modem/router from UPC (provider in the Netherlands) and they allow me to have 120Mbit connection, but with my own WIFI Adapter I only received between the 40Mbit/60Mbit speed. My question is the following; Wich WIFI adapter is the best adapter for my Cisco Model DPC3925 modem/router?The distance between the modem/router and my pc is not that much. And when I use an cable the connection is between the 90Mbit/110Mbit. The WIFI adapter that I now use is the: TP-Link TL-WN881ND. I was thinking to buy a Linksys AE1200, but I dont know if that adapter is much better then I already have.

View 6 Replies View Related

Linksys Access Point :: WAP54g Repeater Showing As Device But Is Not Connected

Jan 28, 2012

I have a WAP54g set up as a repeater. It even shows in the WRT54g device list (Tomato firmware) as a WDS interface but nothing can connect to it. I have the repeater's MAC address in the AP and it's set to "Access Point + WDS" mode. I don't know what I could be doing wrong. Is it a conflict of DHCP on the AP vs static on the repeater?

View 1 Replies View Related

Linksys Wired Router :: BEFSR81 / Add Device Names To DHCP Device Table?

Nov 30, 2011

My BEFSR81 is my primary router and has DHCP turned on.  The router's DHCP range is set to accommodate 12 devices.  I have three computers wired to it and their Host names (as specified in the set-up of each computer) show up in the router's DHCP device table.  I also have two printers (one old Brother HL5250DN laser printer and one new HP Photosmart Premier C410a inkjet printer) connected and there are blanks where the Host name should go.  I would like to be able to tell which printer is which when I am looking at the DHCP device table.  How can I get a names associated with each printer's IP address in the router's DHCP device table?  (The real problem is that the router seems to have both printers at the same IP address (192.168.1.100) and if I can get one of them to change I'd like to know which one it was!)

View 1 Replies View Related

D-Link DIR-655 :: Router Is Not Recognizing Laptop As Directly Connected Device

Oct 27, 2011

I have a setup where there are two networks. A 172.16.0.0/16 and a 10.1.0.0/16 that are separated by the dlink router. I am able to ping from the 172 network to the 10 network using a laptop that is directly connected to the router and that laptop can also browse the web fine. However, I cannot ping to that router or access that subnet at all from the 10 network (if I try to access its LAN (the 172 network)). The 172 network is on its LAN and the 10 network is its WAN. I can access its WAN fine. Also, there the router is not recognizing the laptop as a "directly connected deivce" but its not preventing the laptop from using the router. I have tried to make the router as least secure as possible but still nothing.

I thought about making Static Route to point towards the router's LAN but the only option it gives me is the WAN for the exit interface.

View 1 Replies View Related

Linksys Wireless Router :: Set Up EA4500 Without A Computer?

Sep 2, 2012

I've looked all over the internet for this and can't find a definate answer. Waited for live chat and got kicked before I got to talk to someone... Just sold my computer and the plan was to buy a newer mac but we've been getting along fine without a computer with just using our iphones. So my question, I see that Cisco has the Connect Express app for the iphone, and I've read about all the features it has like changing settings, router features, etc. But I can't find anything on using the app for the initial set up of the router. I'm currently on an older linksys router (set up before we sold the computer) but it's time for a needed upgrade.

View 3 Replies View Related

Linksys Wireless Router :: Using An External HDD For EA4500?

Apr 30, 2012

I got my ea4500 all set up. never had a media servor or anything like that, figured this would be an easier way. when i hook up my exteral i can find it but i can only view the files in windows media player. how can i just browse the folders manually? WMP doesnt let me browse the folders as they actually are on the HDD which is such a pain in the **bleep**. 
 
shows a device in "network infrastructure" but it says problem sending command to the program when i click that. i dont want to have to view the HDD in WMP as a media device...

View 1 Replies View Related

Linksys Wireless Router :: EA4500 Won't Obtain IP From ISP

May 12, 2012

My new EA4500 (fw ver 2.0.36) won't obtain an IP from a Brighthouse TM502G cable modem.  The EA4500 replaced a functioning WRT54G which would obtain an IP from the ISP.  I've tried upgrading firmware and have used both straight-through and crossover cables between the EA4500 & TM502G to no avail.  The EA4500 would issue IPs to it's clients, but not obtain one from it's TM502G.  At the moment, all 3 are daisy-chained together with the old WRT54G in the middle in order to make the EA4500 work.  Both WiFi and LAN ports function in this configuration.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved