Linksys Wireless Router :: EA4500 Cisco Logo Blinking And Not Connected With Any Device
Jul 19, 2012My router EA4500's Cisco Logo is Blinking and not connect with any device
View 5 Replies
ADVERTISEMENT
Router :: Dlink Dir-628 Logo Is Blinking?
Dec 29, 2011i have a dlink dir-628 and it not working problem. the power light, local network led and even the dlink logo is blinking. it was working fine yesterday but it just stopped working randomly, i tried to reset but that doesnt even work,
View 6 Replies View RelatedLinksys Wireless Router :: EA4500 Incorrect Manufacturer And Model For Connected Device
Sep 14, 2012I have several devices connected to my Linksys EA4500. Two of them are my Apple Mac Pro and my Logitech Squeezebox Radio. For some reason, in 'Device List', my Apple Mac Pro has the manufacturer 'Logitech' and the model 'Squeezebox Radio'. As for my Logitech Squeezebox Radio, it doesn't have a manufacturer nor a model. It appears that there is a mix up with these two devices. I have cross checked the IP addresses and MAC addresses displayed in Cisco Connect Cloud with those displayed on the devices and they match - so it's not a case of mixed up names. Could this be an issue with Cisco Connect Cloud?
View 1 Replies View RelatedLinksys Wireless Router :: EA4500 Blinking Every Five Minutes
May 2, 2013I just bought an EA4500 and I set it up and about every 5 minutes it starts blinking slowly and dropping connection.
View 4 Replies View RelatedLinksys Wireless Router :: WRT54G V5 With Blinking Power Light Connected
Mar 24, 2011I've seen related to flashing power lights on the router involve fixes via firmware upgrades off a PC.I'm on an iMac os 10.6.7. The WRT54 used to work as a wireless modem a couple of years ago. Tonight, it doesn't. power light blinks. Can't access any webpage interface for the thing. Reset, power down, computer restart, cable modem turn off don't change anything. Is there anything that can be done other than tossing the linksys? If that is the only option, are there wireless routers more suitable for a Mac?
View 4 Replies View RelatedLinksys Wireless Router :: EA4500 Not Showing Up In Device List?
Nov 27, 2012I have an EA4500 and am using Cisco Connect Cloud software. Its working mostly fine except that I have one device on the network that will not show up in the device list. This is not an issue in itself and normally I would ignore (although it used to show up when I forst got the router) however..
The device is a WDTVLive media unit and required access to windows shares on a media server. Now the WDTVLive device is server an ip address by the router and is available from everywhere on my network but every couple of days it loses the capacity to search windows shares.
I know what you are thinking and I initially thought the same, this is an issue with the WDTVLive box. However one day I spent a few hours trying to resolve (Am an IT Consultant and know a little about networks) and found that I could not fix the issue. I then rebooted the router and it started working. I have since confirmed that every time it breaks I have to reboot the router.
Linksys Wireless Router :: EA4500 - Unknown Device On Network
Apr 9, 2012I recently purchased a Linksys EA4500 Dual-Band N900 Router with Gigabit and USB. Everything set up great with no problems and after a day or 2 I managed to get all home devices connected (2 laptops, 2 printers, an iphone, 1 tv, 1 blu-ray, an old desktop, and a tablet). Everything was connected right and working and I installed the Linksys app on my iPhone which let me see what devices were connected and all that. Well, last night, an unknown device showed up as a connected device. It's labeled as: android_(insert string of characters) and has a MAC address. I've tried and tried to identify what this device is and I can't. Everything else on our network is still showing up independently of that device. I'm worried that someone using our connection and possibly putting our device security at risk. What can I do to A) try to identify what the device is and B) if it is an intruder, block it's access.
View 9 Replies View RelatedLinksys Wireless Router :: Use USB Hub To Connect More Than 1 Hard Drive Device To EA4500?
Jun 4, 2012Can I use a USB hub to connect more than 1 hard drive/flash drive device to the EA4500?
View 3 Replies View RelatedLinksys Wireless Router :: Ea4500 - One Device Not Connecting To Wifi Network
Feb 3, 2013I just purchased a Linksys EA 4500.I set up the wifi properly, with laptops, tablets, smartphones and printer. The wifi network worked fine for a couple of days.But now one of the laptop "refuses" to see the Linksys wifi network. The other devices are still connected and running regularly.
The notebook that does not connect anymore is an ACER 5740DG with an Atheros Network adapter and Windows 7 installed. This notebook is otherwise running fine.At the beginning it was connecting ok and we never had any problem at all with the previous router Belkin_N+_7991AC, that I changed just for speed.
Now the Linksys network is simply not visible to such notebook in the "Available Connections List" that I get clicking on the WiFi icon in the bottom right, while a number of other wifi networks (not mine) are clearly visible. Of course I restarted the notebook properly. For one time I got the visibility of the Linksys, I entered the password and then it was not possible to see the network anymore.No error message from Smart WiFi software.
Linksys Wireless Router :: How To Disable Glowing Cisco Logo On A E4200
Sep 19, 2011Is there a way to disable the logo. The router is in my bed room
View 6 Replies View RelatedLinksys Wireless Router :: PC / EA4500 - Mapping USB Connected HD
Jan 20, 2013I have my USB HD mapped on my PC through my EA4500 router but, it will not connect automatically because, I think, it needs a password. (If I "explore" the mapped drive, it asks me for a password, then connection is fine, until my PC is rebooted.)Is there anyway of getting around this without leaving my HD unprotected? I am using the Smart Wi-Fi software for the router.
View 6 Replies View RelatedLinksys Wireless Router :: External Drive Connected Via USB On EA4500?
May 20, 2012I now have a shared drive shortcut on my desktop from the external drive I have hooked to the EA4500. Is there a way to share this folder to Android phones or Ipads? Looking to backup my phone data to the share (photos)
View 2 Replies View RelatedLinksys Wireless Router :: EA4500 Shows 0 Devices Connected
Mar 6, 2013I have an EA 4500. Tonight I was trying to see what devices were connected. The window shows 0 devices connected, although about 20 devices are connected and working. When I click on "Devices Connected", I get the spinning wheel, and after multiple attempts by the application to list devices, I receive a message that the application does not work. I have the latest firmware installed. This is a recent issue. I have not made any changes to network configuration, nor to any of the devices that all have internet access. I will note that I did not set up a separate SSID for each band. But that did not seem to be an issue in previous months. I also cannot access the router ui from my windows 7 desktop. I can access the abbreviated ui through my Android phone. I tried connecting through smart wi-fi and by ip of the router. I just get the endless spinning circle of dots. I am running Windows 7 all up to date. All drivers are up to date.
View 7 Replies View RelatedLinksys Wireless Router :: EA4500 Connected Via Pptp To Internet Itself
Jul 6, 2012When my ea4500 is connected to other router with internet connection I can access CCC. But if ea4500 connected via pptp to internet by itself, i cannot use CCC because router tells 'no internet connection', even if I have this connection. How to fix it?
View 9 Replies View RelatedLinksys Wireless Router :: Ea4500 - Device In Smart Wifi Is Listed With Two Multiple Apple
Jan 2, 2013I am using a EA4500 and use Linksys Smart Wi-Fi to manage the device. In the household we have multiple Apple i devices. Somehow the Linksys Smart Wi-Fi combined two separte i devices (iPhone 5 and a 4th generation iTouch) to one user.The devices actually have different names, but the Smart Wi-Fi is combining them into one device. So I can't use Parental Controls on one of the devices.
View 8 Replies View RelatedLinksys Wireless Router :: EA4500 Only Displays Maximum Of 9 Connected Devices?
Nov 6, 2012My EA4500 with the latest firmware will only display nine connected devices at a time. It also seems to randomly shuffle which devices to show as connected, even though several more than nine are connected and online. Does anyone else's device list limit itself to displaying only nine devices? The Linksys phone apps also display a maximum of nine devices. I like the routers new user interface and understand that it has received a lot of praise, however this is the second bug I've experienced in as many months (the first being a failure of the device list to update once devices are upgraded to Windows 8, requiring a reset to default settings in order to fix).
View 5 Replies View RelatedLinksys Wireless Router :: Slow Transfer Speed From USB External HDD Connected To EA4500?
Jul 3, 2012Transfer speed for sending or receiving files from a USB external HDD connected to the router is slow? Speed ranging from 2MB - 4MB/s. The HDD is definitely capable of at least 80MB/s if plugged directly into the PC. Is it meant to be this slow or there's a fix somewhere which I'm not aware of? Thought it's suppose to be the top of the line products but seems so inferior if I were to compare with other high end routers in the market which performs better, faster and definitely much cheaper.
View 9 Replies View RelatedLinksys Wireless Router :: E4200 Non-supported Device Is Connected To USB Port
Dec 16, 2011I'm trying to connect an Epson Stylus Color 740 USB printer to a newly purchased E4200 wireless router. I've upgraded to the latest Cisco Connect software and to version 1.0.0.3 router firmware. I get the message "A non-supported device is connected to your router's USB port. Disconnect that device and follow the steps below to connect a USB printer to your router." Cisco support was not beneficial.
View 1 Replies View RelatedLinksys Wireless Router :: E3000 DHCP Client Table Not Showing Connected Device
Jan 10, 2011I upgraded to firmware version 1.0.03 I started to have this weird issue: I have four PCs connected to this wireless router via wireless G. They all run Windows 7 Home Premium. After a few hours I started to notice that the DHCP client table is empty even if all four PCs are connected to the internet. This causes a networking problem because one of the PC serves as a file server and it grants access by IP addresses. Not being able to "see" those computers, my access is denied.
View 2 Replies View RelatedLinksys Wireless Router :: WRT54G2 - Network Connected Device Only See Local Connection / No Internet
Sep 18, 2011I have a very annoying problem with my Linksys WRT54G2.When I connect a wireless device (laptop, phone, TV, Ipad) to my wireless network I only see a Local connection, no connection to internet. After resetting the router (power off for several seconds) the internet-connection is available again.I have to do this every 1 - 2 days.
View 7 Replies View RelatedLinksys Wireless Adapters :: EA4500 Won't Display Connected Devices
Nov 5, 2012After upgrading two laptops to windows 8, they will no longer appear as a connected device under the "device list." They both access the router via wifi and wired, but neither appear in the device list any longer. I've rebooted the router twice, as well as both computers, disabled/re-enabled their wifi connections, but no effect.Every other non-Windows 8 device still appears normally under the device list.
View 3 Replies View RelatedBelkin Routers :: N450 DB - Router Is Blinking Orange Although Connected To Internet
Feb 26, 2013I have a N450DB wireless N Router model number F9K1105 and I'm connected to the internet with an occasional interuption. The light on the front of the router is blinking orange and I have reset it and powered it down several times with no luck. According to my settings I have the newest firmware and all updates have been performed.
View 3 Replies View RelatedLinksys Wireless Router :: E4200v1 Blinking Cisco LED?
Apr 21, 2012I got this replacement router and it is not even a week old and it is doing same thing the previous one was.
View 1 Replies View RelatedLinksys Wireless Router :: WRT54G2 - No LAN And Simultaneous Blinking
Dec 7, 2012I have Linksys WRT54G2 V1 it suddenly died yesterday. I does not broadcast any wifi, I tried connecting via cable but there is no LAN, "Network Cable Unplugged". I also tried to do 30 sec reset even the 30/30/30 reset but no success. The front lights and power supply are blinking exept the Wifi and Power indicators.
View 1 Replies View RelatedLinksys Wireless Router :: E2500 Power LED Blinking
Dec 7, 2012I'm using an E2500 and the Power LED started blinking this week.From the manual, this means “Flashes slowly during bootup, during firmware upgrades, and druing a Wi-Fi-Protected Setup Connection.” We have a wireless printer (wireless disabled), and a Kindle that does use wireless. All other computers are hard wired. I have not started a Wi-Fi protected setup. The router has been in use since the third week in October, and is more or less OK even though the Power LED is flashing. How do I get the Power LED to stop flashing?
View 3 Replies View RelatedLinksys Wireless Router :: Wrt120n Lights Always Blinking
Nov 10, 2011Are the lights supposed to always blink in random order..the power light is solid but other 2 beside it and the 1 where the desktop is plugged in are blinking like crazy.
View 5 Replies View RelatedLinksys Wireless Router :: WRT54G Power Led Is Blinking?
Jan 26, 2012I'm having a problem with my WRT54G wireless broadband router. The power light is blinking and I can no longer access the internet. What should I do. I can't seem to understand the self-help on your site.
View 2 Replies View RelatedLinksys Wireless Router :: WRT610N - Power Led Blinking?
Apr 13, 2013I have a problem with a LinkSys WRT610N router (v1).
I have just bought it used. The problems: I see the power led blinking all the time. I can't connect to 192.168.1.1. I do not notice any effect on the leds when pressing the reset button (I feel a soft click when I do that, but none of the leds seem to realize). The manual states that the led should stop blinking after the "self-diagnostics" ends.
My configuration is DSL connection (by AT&T, phone cable), a Siemens 4100 modem, an ethernet cable into the LinkSys router, then an ethernet cable into a Linux PC. Everything is wired. I see the green light of the LAN connection to my PC, the world blue icon and the USB icon stable on, a shy orange led on in the middle (wireless?) and the power blue led blinking. The PC is configured with DHCP, and I can access both the modem (192.168.0.1) and the internet. The gateway address is the one of the modem (again 192.168.0.1). In summary, the ethernet of the router seems to work, but the router is completely transparent, inaccessible, unconfigurable, apparently unresponsive. Trying to connect to 192.168.1.1 (the supposed default address of the web interface of the router, which is different from the 192.168.0.1 of the modem) I get a timeout error, and I can't ping that address. The modem is configured to handle the PPPoE connection, which I am not sure what it means but the text description suggests in this mode I should be able to access the router, provided that its address is not conflicting with the modem's. If I disconnect the modem from the router, DHCP does not get any address. If I force one, 192.168.1.1 still does not respond to pings.
So Is it normal not to notice any reaction when hitting the reset button? is the object just broken, except that the ethernet subsystem still works?
Linksys Wireless Router :: Power Light On Wrt54g V2.2 Keeps Blinking
Oct 29, 2011the power light on my wrt54g v2.2 router keeps blinking and it wont connect to the internet when connected
View 3 Replies View RelatedLinksys Wireless Router :: WRT54G Blinking Power Light
Jul 4, 2006My Wireless-G WRT54G router has a blinking power light and the startup software says "Unable to connect to the Router! Check that the Router has been connected to the computer, and that your Ethernet adapter is working." I tried uploading the firmware but I can't get to the router page to update. Is there a known problem or solution here or am I just going to have to find the router page?
View 9 Replies View RelatedLinksys Wireless Router :: E1000 Lights Won't Stop Blinking?
Mar 31, 2011I have an E1000 wireless router and after rebooting it from the web admin page it won't stop blinking. I tried following the reset instructions on this page but it is still blinking.
[URL]
I can't access 192.168.1.1 via my browser either. Is there anything else that I can try before considering it defective?
Linksys Wireless Router :: WRT54G Not Working - Lights Blinking
Jul 17, 2011I went online with a tech real quick before I found I beyond complimentary tech support. They say my router is working like a switch. I cannot get any wireless access and to the three direct connections to the router only one is working. The lights are constantly blinking, with the power light blinking every so often
View 1 Replies View RelatedLinksys Wireless Router :: WRT160N Power Light Blinking?
May 11, 2009So I recently upgraded from a WRT54GS to a WRT160N v2, all was well and good for about 3 days. Then I would lose my internet connection every 5 minutes or so, it would fix itself by the time I could open up command prompt and start pinging to pin point the problem. I decided I would update the firmware to see if that would fix the issue. Since doing that the power light has been blinking non stop. I've tried restoring it to factory defaults by holding the reset button for 30seconds, turning it off for 2 minutes and back on. That little blue light just keeps flashing. I can't even access the router setting page using 192.168.1.1. My OS is Windows xp x64 sp2, and I have DSL.
View 9 Replies View Related