How to access their router using Safari on a Mac or an iPhone or an iPad? Â A few weeks ago, Linksys was aware of this as an issue and I wonder if anyone has been successful using these browsers.
View 9 RepliesI recently purchased an EA4500 Cisco Wireless Router. I installed the software from the setup CD, however I cannot access the internet. All my devices (Iphone, etc) can access the router but the router cannot access the internet. Mac OS X 10.6.8
View 1 Replies View RelatedI have recently purchased an EA4500 router. I assigned my sons XBOX a static IP via DHCP reservation (outside of the standard DHCP range). I set up single port forwarding on all the standard xbox required ports. Once I click the "enabled" box, I am unable to access the internet from any of the computers connected to the router. If I uncheck the enable box, I am instantly able to access the internet.
View 4 Replies View RelatedThis is my second post today trying to fix the NAT types for my 2 xbox 360. I tried the port forwarding method but with this router when I enable the ports I lost internet access in my wired devices but my wireless devices still have internet access. I even lost internet access on my computer. I never had manu problems with a router trying to get my NAT type open on my 2 xbox.
View 6 Replies View RelatedAll of a sudden, my GUI look like this I'm using the latest version of Safari on a MacBook and FW 1.0.04 on the E4200.When I click on one of the menu items the only thing I get is "404 File not found".
View 3 Replies View RelatedGot a new EA4500 for Xmas. After setting up the new router I could only access you tube and Google at a very slow speed, however I can not access any other website - Facebook, yahoo and etc... it would ping yahoo and Google no problem friend told me to do a tracer to some ip address and his conclusion was the router is fully functional
Â
ISP uses PPPoE, Im sure that the username and password are correct. upgraded to the latest firmware manually, and holy hell accessing the router with no internet access.
I have an EA4500 wireless router. Would like to allow guest access to the internet without requiring a password. Is this possible, and if so, how? I know how to set the guest password, but it won't let me set it to be blank.
View 5 Replies View RelatedMy EA4500 has the newest firmware and is properly configured to support 20+ wireless and wired devices. It does this job well.Guest Access, however, is a problem. It works for about a day, then stops.Guests can access the login screen and enter the password. Then nothing happens. The screen appears to "load", but it does not connect.I have tried returning to default settings and reconfiguring and reupdating firmware. I have tried turning Guest Access on and off, as well as resetting the password.The only that works is rebooting the router. This is obviously not practical, especially for a contract client.
View 4 Replies View RelatedI purchased Linksys EA4500 and after I connected to my yahoo mail web address does not work ...The router only blocks access to some websites including [URL], and [URL] configuring the router -Â connection without the router works perfectly?
View 2 Replies View RelatedI have had my router for about a month and all the wireless lan stuff seems to be brilliant. Recently I signed up to an ISP (Plusnet), and can't access most websites. The ISP has told me that I should take this up with my Router company. I seem to be having the exact same problems as this guy was having [url]....
View 1 Replies View RelatedHow do I set my EA4500 to require a guest access?Â
View 1 Replies View RelatedI just bought the new EA4500 router and I'm experiencing problems to access the my bank website [URL] I can't access this website.
Â
I thought that the problem could be with Comcast, but I tested my Mac with a cable directly connected into the cable modem and it worked fine. I was able to access every site.
Â
It could be a problem with browser security, but I even tested with different computers (Mac, PC's, Ipad, Smartphones) and none of them were able to access the [URL] wirelessly.
Â
It seems something strange with the router. I tested some forum solutions (MUT, QoS) but they didn't work.
I upgraded from a E2000 to a EA4500 today and I am experiencing slow wired WAN speeds. On my E2000 I get approximately 60Mbps down and approximately 2Mbps up, and when switching over to the EA4500, I can only manage about 20Mbps down and about 2Mbps up. I can switch back and forth between routers and replicate the results every time
View 7 Replies View RelatedI have a 500 GB HD connected to the router to the usb port and It bothers me that whenever electricity fails in our city and it comes back I can still navigate and access my files on the LAN from the hard drive, but I lose the connection to the router management either by my smart phone application or by accesing trought my laptop. The only way I have figured out to solve this is connecting the drive directly to my laptop and erasing the configuration files created by the router when you set the shared folders, etc. then plugging again and setting all shared folders etc.
View 9 Replies View RelatedI am looking to extend the range in my house by replacing my E200 with an EA4500 (N900) and using the E200 as a wireless access point. Â My question is, will it work even though I will have two switches between the two routers? Â Second, will I be able to use all of the functionality of the new EA4500? Â Specifically I want to hook up two cameras in the house?
Â
Setup: Cable Modem --> EA4500 --> Switch (1GB) --> (1(GM) --> E200
Just got my Linksys EA4500 router today.The only confusing thing, not not well explained by Linksys . Is the USB storage set up.One thing (very important) Linksys has failed to explain how to gain access to the USB storage once connected to the router. Once the USB storage drive it set up. Or at least I think it's set up. Nothing shows up on my network page. So how am I to get access to the drive? If it don't show up?I need to know how to gain access to the USB storage drive that is connected to the Linksys router.
 This is how I think it is to be set up. Again the instructions are not all that clear how to set up. And where is this widget on the homepage to be located? Â
Do you plan to support L2TP protocols Dual access.and / or the ability to enter static ip address (as in pptp) to connect l2tp.in Russia in the past few years,dominated by the type of connection L2TP Dual access, ie provider gives the internal ip address (static), and address of the VPN DNS server. to access the Internet using a protocol l2tp.as the network provider has the internal resources, which can be accessed if the router supports dual atstsess.of the protocol pptp providers moving away.
View 3 Replies View RelatedI've been researching this for a day now and have just confused myself further. Â Long story short, I just picked up an EA4500 and there's still a dead area in the house. Â I already have one ethernet cable that's being used which runs from the one side of the house to the other. Â After researching this, I believe I can set up the E1500 as an Access Point to further the range of the wireless signal via the ethernet cable and 2 routers. Â I just have a few additional questions that the articles and walkthroughs I've read through didn't seem to address.
Â
I set up the EA4500 and have 2 SSID's, one for 2.4Ghz and one for 5Ghz band. Â When I set the SSID on the E1500, should I use the 2.4Ghz SSID from the EA4500 or should I reset the EA4500 to factory defaults and only use the 1 SSID instead of splitting them? Â Or, should I use a totally different SSID altogether on the E1500?I think from what I read, you should use different channels for each router; does it matter which ones you use as there's not that much traffic in my area and do I need to change the channel on both bands of the EA4500? Â Or can these all be left to Auto?Can you still use the ethernet ports on the AP/E1500 or are they rendered useless if you set it up in this mode?
Have just changed my E4200 to EA4500 but can my computer has not IE access. Both router has same settings and the mac adr are both in the modem at the local cabel firm.
View 4 Replies View RelatedI just switched to the EA4500 Router and I'm now unable to remotely access my camera devices.  I have done the port forward.  I can access the cameras from my local LAN both when using the local 10. ..and external 99 .. Addresses.  When I go off the local connection -  Access does not work. Slingbox did its auto configuration and I can access it.  I just cant get to camera devices (Panosonic, Foscam, etc.). Â
View 3 Replies View RelatedEA4500 Is there any way to enable parent controls on everyone who logs in over guest access? We have a lot of youth who use the network, but we only give them guest access so that they can't access network machines. I enabled Parent Control, but I couldn't find a way to say "Parent Control enable for Guest Account".
View 1 Replies View RelatedI want to do with my ea4500 is assign it a static IP and access it after doing so. But, no matter how many times I try, I cannot enter its IP address in the address bar and see its settings. I change its IP to192 168 1 200. Subset 255... DG 192 168 1 1 DNS same.Under router address 192 168 0 1I CANNOT access this router at 192 168 0 1 at all. The thing is, the **bleep** settings are not any different the. How they were when it was WORKING. I literally took a screenshot of my setting in case a scenario like this would come up, yet it more problems arise. The only way I can access the router is by doing a factory reset and accessing it at 192 168 1 1.
View 9 Replies View RelatedI am not able to access https sites (like banking etc.). Â Once I plug my old router back I have no such problem. Â I guess it must be router settings that I cannot figure out.
View 7 Replies View RelatedI use the Smart Wi-Fi app on my iPad3 (IOS 6.1.3) to access my EA4500 remotely.When I want to add a port forwarding, it shows always 192.168 as start of the ip address related to the ports. But I have a 10.71 network installed and cannot change the 192.168 to 10.71. I suppose this is a bug.
View 2 Replies View RelatedI tried to remotely access my disk connected to the USB port of the EA4500 and it failed until I disabled the IPv4/IPv6 SPI Firewall options. Surely, the firewall should not block the router's own FTP server!
View 8 Replies View RelatedI just purchased the EA4500 router and went through the setup with no issues. Â The only problem is I cannot access the router either locally or through the Smart Wifi dashboard. Â Everytime I go to the page with "Access Router", enter the password and clikc the "Submit" button it does nothing...no incorrect password prompt or idle prompt...almost like the page is broken somehow. Â I've done all of the usual, restart router, restart PC, restart cable modem, etc. and always having the same result.
View 4 Replies View RelatedWhen my ea4500 is connected to other router with internet connection I can access CCC. But if ea4500 connected via pptp to internet by itself, i cannot use CCC because router tells 'no internet connection', even if I have this connection. How to fix it?
View 9 Replies View RelatedI have a CISCO modem from SHAW set as bridge. I recently bought a CISCO EA4500 which got automatically upgrade to the current Firmware 2.0.37 after connecting it to my ISP. After a few days I noticed my internet speed was slow. When I checked the router I saw it flipped from 1Gb to 100Mb. Called Shaw they could not figure this one out, while waiting I decided to turn everything off / on and internet port came back to 1Gb. 2 days later same thing again, I just turned off both the modem and EA500 router. Â A couple of days later again same problem but this time I just turned EA4500 off/on and internet port came back on with 1Gb.Otherwise I will have to turn this one back in to the store for an exchange.
View 9 Replies View RelatedWhere can I find a log or list of devices that attempted to access my EA4500 wireless network?I am using the cloud services to monitor my EA4500 usage in an apartment environment.
View 1 Replies View RelatedI'm trying map the USB hard drive connected to my EA4500 router as a network drive in Windows 7, and it works perfectly until I enable secure folder access on the router.
Â
After enabling secure folder access, and not changing any other settings on the router I first unmount the drive since it was set up without credentials and doesn't work that way any more. When I try to remap the drive I use the same address, but select "Connect using different credentials" When it prompts me for the log in info I try using the router admin account, but it fails to connect.  Windows network diagnostics tells me the device refused the connection. I proceeded to set up an account on the router under the folder access settings with the same username, and password I use on my computer, and tried to connect it without checking "Connect using different credentials" (And typing them in manually if that matters) with the same results.
Â
Even with secure folder access enabled I can still reach the drive just fine by typing "ftp://192.168.1.1/" into file explorer. It prompts me for a username and password, I put in the admin credentials, and I'm in. Even the account I created with the same username/password as my computer works this way.
Â
After disabling secure folder access everything works perfectly fine again... I would MUCH rather do this with it though.
Â
Following these directions: [URL] When clicking the browse button the router shows up when secure folder access is disabled, but does not after it is enabled. I've looked through my windows sharing settings, and haven't noticed anything that should cause problems, pretty much everything is enabled. I've also tried turning off my firewall with no success.
I have a Linksys EA4500 setup on my corporate network for wireless access.  I have enabled the guest network and from all I can tell it's on a seperate subnet from my internal network like it should be. 192.168.x.x  My internal is on a 10.x.x.x network. I conenct to the guest network using a laptop and I'm prompted for a password to get to the internet, which I like. The one issue I'm seeing is when I'm connected to the guest network I can still do an RDP session to internal resources.  How is this possible if the guest network is on a seperate subnet?I take a laptop which has not been joined to my domain, connect to the guest ssid, and then open an RPD session and enter an IP address for an internal server and it connects.  Is there a setting to keep this from happening
View 6 Replies View RelatedI am looking to track what my kids are doing on the internet. I have an ea4500 and was wondering if there is a detailed log file that I can look at?
View 3 Replies View RelatedI am using an EA4500 with the latest firmware that support the Cisco Connect Cloud. I am connected to the Internet and I need to edit the Internet settings and select a different internet setting: Static IP from the current setting DHCP. I select the option from a drop-down menu after selecting Edit, but there is no edit and no drop-down menu.
View 9 Replies View Related