Linksys Wireless Router :: E4200 Connected But No Internet (fibre Optics)
Sep 15, 2012
I have recently switched to fibre optics and I have decided to reuse my Linksys E4200 that was previously used with a cable network. However, After installing the router using the disk provided I was unable to connect to the internet even though my computer was able to connect with the router. What can I do to solve this prob. I have tried restarting the modem to the factory settings and the same problem recurs.P.S. The modem was installed to another router provided by my service provider.
View 6 Replies
ADVERTISEMENT
Feb 19, 2012
Supposing we have 2 LANs of 5 pcs in different buildings is there any special way to connect them using fibre optics?
View 1 Replies
View Related
Sep 17, 2011
What is the upper limit of bandwidth in fibre optics communication?
View 1 Replies
View Related
Jul 11, 2011
I've used Netgear & other routers for years; I was able to see the devices connected over ethernet & wifi through the router configuration utility. Cisco's interface looks poor; there is no way to see the connected devices.Many of the devices I have have a 5 Ghz radio and some don't so i need to see at what speeds they are connecting at.Or does Cisco not provide this utility? I am surprised that a high-end product from Cisco does not have this function.
View 9 Replies
View Related
Sep 26, 2011
I can see who is connected via the physical ethernet ports on the E4200 router. However, is there a way to check who is connected to the wireless network. Also is there a way to see rx/tx bytes statistics for all wired and wireless users (including ones that are no longer connected)? I've had the router for 3 months now and it works great but I find there isn't enough operational user info/stats on this router.
View 2 Replies
View Related
Sep 2, 2011
I need a small number of computers connected to the Internet through the E4200.E4200 must be connected to the switch via the LAN port.The basic network is a network of class A - 10.xxx/255.0.0.0.How do I do?E4200 can not enter a mask of 255.0.0.0.
View 1 Replies
View Related
Jul 14, 2011
I tried searching through the threads but didn't see anything on this. Recently bought the E4200 so that when guests come by they can use a separate network instead of mine. I have guest network set up for one user but I am able to connect more than one computer to the guest network.
View 9 Replies
View Related
Dec 16, 2011
I'm trying to connect an Epson Stylus Color 740 USB printer to a newly purchased E4200 wireless router. I've upgraded to the latest Cisco Connect software and to version 1.0.0.3 router firmware. I get the message "A non-supported device is connected to your router's USB port. Disconnect that device and follow the steps below to connect a USB printer to your router." Cisco support was not beneficial.
View 1 Replies
View Related
Jan 3, 2012
I just installed a E4200, and found that once I connected my Homeplug Powerline to E4200, the connected (wired / wireless) computer (with E4200) connection will be dropped. The connection become normal again once I disconnected the Homeplug with E4200.
View 5 Replies
View Related
Oct 31, 2011
I'm thinking of upgrading from my Linksys WRT54G router to the E4200 and though I've goggled. Also, are there no LEDs on this unit to tell you the status of what's connected?
E3000WRT-54GWVC-80N
View 3 Replies
View Related
Nov 28, 2011
I just bought a new Linksys E4200, and connected it about an hour ago. I have a 30Mbps internet connection when connected direct to the modem, but when connected wired to the router, max speeds are 8Mbps.
View 2 Replies
View Related
Jul 10, 2011
U just bought a new E4200 router to enjoy 5ghz band for the first time.I noticed the range at my house of the 5gh is smaller than 2.4 is that right?one of my pc is having trouble keep connected to the 5ghz signal or the router doenst respond to it, is there a way to improve that signal?
View 2 Replies
View Related
Jun 30, 2012
I have the E4200 with latest firmware . When I connect my computer to the E4200 and that to my modem im getting about 50mb speed. If I disconnect the E4200 and connect my computer straight to the modem I get about 95mb speed?I have the Virgin Broadband 100mb service and all is working fine at their end.
View 2 Replies
View Related
Jan 14, 2012
If I were to take a e4200v2 and use it as an access point (disable DHCP), would the USB port connected to a Hard Drive still function as network storage?
View 5 Replies
View Related
Jun 18, 2012
I have my main router, a E4200v2 which I use as a router and it provides wireless signal throughout my house, however reception is not as strong on the upper floor and there is a slight dead spot, so I purchased an E4200 for the uppermost floor.I set the E4200 to bridge mode so it will act solely as an AP.However connecting the two routers LAN to LAN and the AP does not access the internet.Setting a static IP for the router, instead of acquiring one via DHCP causes me to not be able to access the admin page on the AP.
Connecting WAN on the E4200 to the LAN on the v2 does not work either.My goal here is to have my main router on 192.168.1.1 and the AP on 192.168.1.2 where I can access the admin settings for both routers in case I need to make changes.
View 9 Replies
View Related
Apr 21, 2012
I have my e4200 connected to another modem/router (2Wire 3600HGV), because the other router does not support Wireless N. I can connect to my E4200 network, but there's just no connection to the internet. I reseted my e4200 but still no luck. I've unplugged both routers and replugged them, nothing. I know it's possible because I've had it set up before but I had my 2Wire exchanged for a newer one.
Firmware: 1.00.4
Just to be sure. I have the cable going from my modem out of port #1 and into my e4200 where it says internet, thats correct, right? On my e4200 i have the IP 192.168.1.2 but on the 2Wire I have the e4200 as 1.92.168.1.66.
View 1 Replies
View Related
Apr 1, 2011
e4200 internet keeps dropping
View 9 Replies
View Related
Sep 26, 2011
I have a Linksys E4200 router with firmware version 1.0.02. I am using a Macbook Pro. I can connect to a VPN server with the default VPN client software, but it kills my internet connection and disables connecting to SMB
View 5 Replies
View Related
Jan 1, 2013
I have a E4200 V1 with firmware 1.0.0.5 installed The problem is that when I connect the cable from my modem to my router and recycle both I get a rapidly fashing Cisco light and can not connect to the internet.If I remove that cable and recycle the router my network works but (obviously) I have no internet connectivity.This was working (almost 2 years) without issue until today.I updated the firmware and did a factory reset and neither resolved the issue.My next experiment is to see if I can't get log files (since the factory reset) but I can't do that at this time.
View 3 Replies
View Related
Jul 9, 2011
I have a Motorola Docis Surfboard model Model SB6120 and can connect to the internet with the ethernet cable directly onto the labtop but if I connect it to the E4200 router the range is there but the internet connection is not. This happened 2 days ago and can't get the router to work.
View 4 Replies
View Related
Aug 9, 2011
I just purchased e4200 from a friend of mine. Got an issue with setup of this device. I use a model from internet provider. Have 2 computers at home. One is pc with cable, another one mac with wireless.SO my issue is that i can not connect none of them. I was trying to use cd that comes with router but he can not locate a router. When I connect cable directly from modem to computer everything works fine. As soon I connect cable to a router I can not see a router and I can not connect to internet.
View 1 Replies
View Related
Jun 28, 2012
My internet modem won't read my E4200 router. How do you reconfigure the settings?
View 2 Replies
View Related
Feb 25, 2011
I have put two different e4200 routers in my network and both of them have the same issue. I believe there are some major firmware bugs with this router. First of all I set up everything using the web interface. My laptops could connect to the network and internet but any of my devices that use wireless bridges (WET610N) to connect could only get local network access. They could not connect to the internet. After some troubleshooting I found the reason it was not working properly. I used DHCP reservations in my network because of port forwarding and such. Well when the devices connected to the bridges were in the reservation list they were unable to connect to the internet. After I removed them they now are able to get on the internet without a problem. So that is the first problem I've found so far...
The second is I can no longer connect from my Xbox 360 to my Media Center PC. I tried to set up a new connection but this did not work either.
View 9 Replies
View Related
Jan 15, 2012
ever since i had a power failure losing all power in my apartment, my router has begun regularily losing connection to the internet, I have to go into the router and renew ip address which is quite annoying
[code]....
View 6 Replies
View Related
Jan 28, 2012
I setup my E4200 v2 with different SSID's for 2.4 and 5GHz modes. I have no problem with a 2.4 Ghz connection on my laptop, but I cannot connect to the internet in 5GHz. mode. I choose the 5 GHz SSID and enter the passphrase but no luck, even though I have a full 4 bars inthe wireless icon.
View 4 Replies
View Related
Jun 10, 2012
my e4200 wireless. I have internet connection speed of 40mb and I have epc 3925 working in bridged mode as modem and E4200 as router. When I connect my laptop with wire on e4200 I am getting 37-38 Mbps on speedtest.net which is perfectly fine. But on wireless I am having a lot of dropping of speed: I have 2mps then jumping to 5-6 Mbps and so on it never goes more than 5-6 Mbps. When I disable WMM Support in QoS I am having perfectly constant 20mbps but... I have only g network 54mbps. [code]
View 9 Replies
View Related
Nov 4, 2011
I am trying to setup my E4200 to my new Cable Modem. I followed all of the procedures. I get Internet access when plugged directly to modem. I cloned the MAC Address and the Stus of the Router displays my current IP's (so I should have Internet). However, when I plug my computer into the Router I get no internet access.
View 3 Replies
View Related
Feb 20, 2012
I have a problem with the e4200 router and a mybook 1 TB connected to it. The media server works fine but after a while i loose contact with the router and the server this means that the Cisco connect doesn't work, the 192.168.1.1 doesn't work and I can't find the disk via \. I do have internet connection via wifi as im using it now....why I loose connection to the router? The lease time is 24h and it can happen more than once in a day.
View 4 Replies
View Related
Oct 16, 2011
I have a 100mb conection and regularly get 90mb plus speed when conected direct to the modem. If I conect via the E4200 I only get 50mb ? I have tried disabling the firewall and QOS but this has had no effect. I am using a wired conection and the latest firmware. Its almost as the E4200 is capped at 50mb throughput.
View 6 Replies
View Related
Sep 26, 2012
I have an E4200, and upgraded to Connect Cloud. It was buggy, and so I downgraded to the firmware before that. I have all the computers working fine in the house except my desktop. it connects fine to the network, can see the other computers on the network, can even do a windows update. But when I go to use google chrome or internet explorer it just wont access the internet. It doesn't seem to work either if it is a wired connection, or a wireless connection It was fine before the upgrade and subsequent downgrade. It was on this desktop that i installed and uninstalled thew Connection cloud. I know enough to set up the network but when it doesn't work
View 4 Replies
View Related
Aug 12, 2011
I'm having a problem with Wake on Lan. (I'll bet you never guessed from the title, eh?). I have an E4200 and I can not get WoL to work over the internet.(I'm assuming it's not actually going out to the internet when I wirelessly wake it using shawn.dynamicservice.com and the subnet, but rather the DDNS name is being resolved through the ARP cache, but I don't know. I'm still learning) Consequently, if the sentence above in parenthesis is correct, I am unable to perform WoL from outside my LAN. What am I missing?
View 3 Replies
View Related
Nov 29, 2011
I have a brand new E4200 with two desktop computers using it with no problems. I also have a work Thinkpad laptop that I use a couple of times a week from home. Since day one of installing the new router, I have experienced the blue screen of death numerous times during the day (the number of times varies from 1 to 6 on a really bad day). I believe this is happening when I lose my connection to the router. I can see it trying to reestablish itself but the VPN will drop the connrection before it has a chance. I never lost my VPN connection until the day I installed the new router. Yesterday, at least one time it was unable to reestablish connectivity with the router and I had to reboot the laptop to get it connected. Could this have something to do with the IP address? I do not have any issues with the laptop when I am at work using a docking station.
So, I am wondering why I am constantly losing connectivity on the laptop only. The laptop has Windows XP and I am using AT&T Global Network Client to access the work network. Is there a setting somewhere that will fix this? Our IT folks rebuilt my laptop and I am still experiencing the same problem. I checked and I have the current version of the firmware for the router.
View 1 Replies
View Related
Feb 3, 2012
If I connect wire directely to the PC Ethernet port the Internet speed is about 400 Mbit/sec (speedtest.net)When my PC is connected through the Linksys E4200 Internet speed is not above 90 Mbit/sec.
View 1 Replies
View Related
