Cisco WAN :: Running All Switches Running By Default Configuration And Connected To WS-C4506
Jun 11, 2013
I have 30 switched in my corporate network it’s all up and running all switches running by default configuration and connected to WS-C4506 core switch our dhcp server pooling 192.168.100.1/27 network. Now we need to configure new Vlan for finance department this department has more than 200 users. If my server distributes 192.168.200.0 range ip can vlan2 automatically assign ip 200.0 addresses to finance department.All switches running default config no ip address assigned.
View 9 Replies
ADVERTISEMENT
May 7, 2013
I need to replace an existing ASA 5540 with a new ASA 5525X. I would like to pre-stage and configure the new box with the existing config, migrate license and export certificate files before swapping it with the old one during a change window. The new firewall will run 9.1 on deployment. Now the same 7.2(4) cannot just be copied over to 5525X running the minimum 8.6 version. There is a Web based tool available at [URL] according to Cisco documentation but the page does not load for me (Cisco intranet only tool ?). Is there another tool for automatic conversion ?
View 3 Replies
View Related
Oct 25, 2011
Would it be possible to change output style of "sh running-config" in SF-300 switches to Cisco IOS-like format (eg.: options related to the specific interface put together, add tabs) in the next release?
View 24 Replies
View Related
Apr 2, 2012
My company is beginning to have a lot of sites were we are stacking 3 to 4 C2960S-48 switche.This is making "show running-config" very very long because of the 4 x 48 interfaces.I can’t find a CLI command that show me the running-config of a ranges of interfaces. If I for example would like to see running-config for switch 3 (interfaces 3/0/1-52)The Show Running-config will show all the interfaces (for the two first swtiche = 104 interfaces), which take a time before I reach to switch 3.I miss a CLI command like: show Running-config switch 3, or module 3, or show running-config interface range x/x/x-x ?I’m well aware of the CLI command show running-config interface x/x/x, but this will only show me one interface.
View 3 Replies
View Related
Jun 22, 2011
There are some troubles in my 7206 vxr . The process of this problem below.
LOG:
Self decompressing the image : ####################################################################################################################################################################################################################################################################################################################################################################
[Code]...
View 2 Replies
View Related
Mar 2, 2013
I bought my laptop 4 weeks ago. It has Windows 8 on it. It worked great until this week. At first, Google Chrome quit working. Then IE quit. I connect wirelessly. It says it is strong, but no Internet access. I do have connectivity on my phone to that router.
View 2 Replies
View Related
Dec 24, 2012
I was online then all of a sudden i got disconnected and now it won't show any network available. My other laptop and xboxes are online just fine, so I know then it's an issue with my one laptop. But I don't know how to fix it. No networks are found at all and internet only works when it's wired. I have a HP laptop running windows 7.How do I get my network to show up so I can have wirless internet again? Someone thought maybe new drivers but no clue what I really need to download. I only know basics of computer stuff.
View 1 Replies
View Related
Oct 28, 2012
I have an Asus RT_N12 that works great(12-20mbps) hardwired. It also has a "excellent" connection when connected wirelessly but slows down to 50Kbps.I have restarted/started, reset(all multiple times). I contacted ASUS customer support they told me bad router or firmware update. I updated firmware same thing took the router back and exchanged router. Same problem. I then went into router settings and changed from "Auto" to channel,1,2,3,4,etc. No luck. My buddy that is a "Tech expert" says that since I live in high density(12 unit) apt building someone has something interfering.My only problem with that is I used to live in a 48 unit building with wi fi supplied by the building and never had this problem.
View 7 Replies
View Related
Jul 13, 2011
command to get running config of Cisco VPN 3000 concentrator.
View 3 Replies
View Related
Feb 3, 2013
I'm running LMS3.2 and RME 4.3.1. I deployed a netconfig job to our network which consisted of approximately 800 devices.The report said that the job completed successfully however some of the devices didn't save thier running config to startup.
Is it possible to add a command or issue another netconfig job just to save the running config, so I can identify if the job fails on some devices? Using the tick box in the netconfig job doesn't seem to alert you if its not successful.
View 2 Replies
View Related
Apr 28, 2013
I've recently received this new Cisco 1921 routers with Cisco CP loaded, so it comes up with the annoying change username and password at first access. I've removed all of those files from the flash memory, and rebooted it, and it came up with the proper initial configuration dialog, which is what I wanted. But, whenever I configure the router with a set of basic configuration, like interface, routing, and snmp loggings, and hit wr mem, it doesn't display at all when I do "sh run". It's weird cause when I do sh run | sec rip or any other stuff that I have configured, it shows up , but not in sh run at all.
What's the deal with the new routers? Even sh version doesn't show the config-register or memory allocation details.
xxxxx#sh ver
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
[Code].....
View 5 Replies
View Related
Mar 21, 2012
We were having a discussion in my group about startup vs running configs, and how often some network managers forget to "click save" when they configure a switch. Is there a way to configure Ciscoworks to copy the running config to the startup?
View 2 Replies
View Related
May 24, 2012
I am using ACS5.2 I want user to access the device with all necessary command like show run/ver/int/log… I try to set user privilege using Shell from 1 to 10 but show run doesn't work.
View 15 Replies
View Related
Jan 9, 2012
I am wondering if it's possible to convert a Pix 501 configuration running version 6.3(5) to a new ASA5505 which we just purchased? We have site to site VPN on this device and i am just trying to save some time. I believe Cisco TAC might have a tool to do this but i am not sure.
View 4 Replies
View Related
Aug 7, 2008
We have a bunch of switches that are running fine but the running-config file is missing and we can't save the config to the tftp server. IOS is c3550-ipbasek9-mz.122-37.SE1. I've got lots of these switches running the same code that are just fine.
View 8 Replies
View Related
Jan 11, 2012
Just picked up the E4200 and used Cisco Connect to install. Wanted to know a few things?
-Windows 7, 64 bit
-E4200 router
-AE2500 adapter
1) How can I tell if its running at optimal configuration?
2) Before with my previous router (netgear) I didn't see my router in Device Manager. Now its under Network Infrastructure Devices. It lists the name of my router, under that it lists Microsoft Wireless Router Module??
3) Before with my previous adapter (belkin) I would see my Network Adapter in Device Manager. I see my network adapter listed, under that Realtek PCI (LAN), but now there is another new device? Microsoft Virtual WiFi Miniadapter??
Why are these Microsoft devices showing in Device Manager? Did they not get installed correctly?
View 2 Replies
View Related
Jul 28, 2012
My issue is that when trying to run the setup software for my new cisco 4500 router, an error message comes up which states that the new mac operating system 10.8 aka mountain lion is not supported. so now i had no choice but to leave my network unprotected as i cannot run setup. I was just wondering if there was another method by which i can configure the router without running the setup cd.
View 3 Replies
View Related
Jun 26, 2011
we have a pix 515E firewall with software version Cisco PIX Security Appliance Software Version 7.0(4) and ASDM version Device Manager Version 5.0(4). we are in a process of upgrading the software. Kindly suggest the software and ASDM version most fit for the device. Also the software should be compatilbe for the current configuation running.
View 3 Replies
View Related
Oct 14, 2012
I have a new 6513 with 2 sup32's with IOS. This chassis will replace a working 6513 with 2 sup2's with CatOS.I would like to convert my CatOS running configs to IOS, and I know there used to be a tool for this.
I have searched around and found many broken links to an old Cisco tool to convert my former configs, is there any way to get this tool today? I have tried over 20 links and not been able to find a working one yet.
View 2 Replies
View Related
Jun 22, 2012
I have on 3750X stack with a few vlan
--------------------------------------------------
vvlansw06# sh vlan
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Gi1/0/6, Gi1/0/10, Gi2/0/5
Gi2/0/6, Gi2/0/37
10 LAN_10 active Gi1/0/16, Gi1/0/17, Gi1/0/19
[code]....
where are the others vlan?
View 3 Replies
View Related
May 4, 2013
After running for about one month, my SG200-08 hit 100% CPU and pings increase from under 1ms to 300ms. I purchsed the SG200-08 for home due to its support for IGMP snooping. I have a TELUS Optik TV service at home which uses the Microsoft Mediaroom platform and multicast on the local LAN. When the SG200-08 hits 100% CPU, my Cisco STBs start to exhibit multicast issues due to delayed or dropped IGMP messages. I recently upgraded the SG200-08 to firmware 1.0.6.2 hoping that it would fix the issue, but it hasn't worked. [code] Smoking latency graph of the SG200-08 ICMP response time. On May 1st the CPU spiked to 100% and the laency increased to 300ms. The problem has been occuring since I installed the SG200-08 with the CPU spiking to 100% about once a month. Rebooting the SG200 will clear the issue.
View 3 Replies
View Related
Feb 15, 2011
I've upgraded a 6509 switches wich are running in VSS, from IOS 12.2 (33)SHI1 to 12.2 (33)SHI5. After that I'm facing the folowing log messages periodically. [code] I know that this is a diagnostic result from TestUnusedPortLoopback feature. But this interface is disabled (shutdown).
View 5 Replies
View Related
Apr 29, 2012
What is the exact command in restoring the running-config on a Nexus 7010. Is it the same command / procedure as the Cisco IOS?
View 3 Replies
View Related
Aug 6, 2012
Looking for feedback from other organizations that have large 3750 stacks. I've got one stack of (8) 3750's composed of (6) 3750G's and (2) plain 3750's. This particular stack is usually unresponsive to SNMP queries and often fails to write config when we make changes. After a couple tries it will finally go. Part of my probably here is likely the plain 3750's that always boot faster and come up as the master. I should manually set the master to one of the G's. What I'm wondering is who else has 7-9 3750's stacked and are they performing well for SNMP, telnet, etc? I've got another newer stack of 7 3750E's that I need to add one more switch to. Need to decide if I want extended downtime to break the stack up or just add the 3750X to make member 8 and hope it performs well. I have 50+ 3750 stacks working great on our campus.
View 1 Replies
View Related
Feb 10, 2013
We are implementing NAC in our environment and unfortunately still some of our obsolete 6500 switches are running CATOS, the current (cat6000-sup2cvk9.8-6-4.bin) image does not support some of the commands related to NAC implementation. Therefore, I would like to urge you to provide me the 8.7 image which supports all the NAC related commands and will be easier to finish the long pending assignment.
We are in process of replacing the obselete hardware but that will take time.
So, 8.7 K9 CATOS image required.
View 4 Replies
View Related
Nov 14, 2012
I'd like to know if there's a command I can run to turn off paging on my SF302 switch. So for example, when I run the "show logging" command on the CLI, I'd like to it return all the results instead of prompting me to hit space bar or enter.
View 3 Replies
View Related
Jul 3, 2012
I have two C4506 switches and I would like to create two L3 links between them by using only one physical link. I will then assign each L3 link to a different VRF.
I think I have two choices but I'm not sure however that the second one is possible...
---------------
1st choice: creating two VLANs and two SVIs on each switch
interface Vlan10
ip address 10.10.10.1 255.255.255.252
ip vrf forwarding vrf1
interface Vlan20
ip address 10.10.10.5 255.255.255..252
ip vrf forwarding vrf2(code)
View 1 Replies
View Related
Nov 14, 2011
3750 switch connects to Blade-switch_1 and Blade-switch_2 Spanning-tree mode is configured as rapid-pvst on 3750 switch, do I need to configure rapid-pvst on both blade-switches or keep the default pvst config.3750 is running VTP domain HQ and transparent mode Both Blade_switches are running VTP domain CLI and transparent mode To configure Etherchannel between 3750 and blade-switch_1 do I need to have all devices in same vtp domain?
View 16 Replies
View Related
Mar 5, 2013
I can't seem to get my DIR-655 up and running again.I had a DLINK DIR-655 hooked up via RJ-45 cable(s) to my AT&T U-Verse 3800HGV-B Gateway. The DIR-655 was serving as a wireless connection for my laptops and also as a wired networked all-in-one printer that was plugged into it.The Ethernet (RJ-45 cable) traveled from the gateway, through a 4-port switch, and then to the Internet (WAN) jack on the back of the DIR-655.There's a couple of wire- connected computers connected via that switch in between that's why it's there. At the DIR-655 end I had an HP Photo Premium AIO printer (Model: 309A) connected by wire; and of course, the two laptops would connect via that unit too. The laptops are WinXP and Win7.Everything worked fine... BUT, the upstairs iMac and a downstairs home office XP machine couldn't see the networked printer for some reason. That reason (apparently) is that the DIR-655 is part of a "separate network" or something.Well, long story short - I tried to adjust the settings on the DIR-655 but that didn't work and then I tried to go back, but that didn't work. So then I decided to just start from scratch to re-setup the whole thing but NOW I can't even access the router via a browser at url...
View 14 Replies
View Related
Apr 19, 2011
I'm not sure how to tell if I'm running ssh version 1 or ssh version 2, or both.I thought a show run would show a line like, "ip ssh version 2" or "no ip ssh version 1", but I don't see these anywhere.
View 4 Replies
View Related
Jan 21, 2013
connecting PRI to BRI interface on ISDN. I have all this information provided by the TELCO and i have configured it but due to some reason i am not able to connect them. I have given the questions with answers provided by the TELCO. I am also providing the running configuration of the PRI interface and also the error message i am getting when trying to test call itself.
1. Is the PBX designed for Pre-National or NI-2 protocol? -
Protocol using C7MATL
2. Are there any DID station numbers that your CPE cannot accept? -
No
(i.e. 0 or 9 in the 4th position)
3. Which carriers will be your choices for your PIC and LPIC? -
Carrier using DChannel
[code]....
View 2 Replies
View Related
Apr 25, 2013
I am running LMS 4.1on a VM, it runs very slow, what specs my vm should be running to support this application?
View 2 Replies
View Related
Mar 4, 2011
Our company is a small one and steadily growing towards mid size. We currently have about 200 or so users. Naturally we have run out of IP addresses and now we must redesign the entire IP schema.Initially our plan was to just implement a class B subnet for the whole network with certain ranges belonging to certain kinds of devices/machines/servers.Are there any cons to this? If so, could you link me to documentation that explains this?
View 4 Replies
View Related
