Home Network :: Getting Name And Last Name For A Dynamic IP Address

May 3, 2011

I am wondering if there is any way to get the name and last name of the person that has the internet connection corresponding to a particular dynamic IP address that I know, that was used to send an email at a particular date and time that I also know.

View 5 Replies


Home Network :: Connecting Router - Unable To Get Dynamic IP Address

Dec 19, 2011

I have a high speed wireless DSL router from my ISP (Telus). I use one port off the router to connect directly to my desktop computer. Another port is connected to a switch to which ethernet cables to three other rooms are connected. My problem is that when I connect my Bell PVR (9242) to the 'switched' ethernet cable, I'm apparently not able to get a dynamic ip address, which the Bell unit requires, and can't connect to the network.can I connect another router, in place of the switch, to deliver dynamic IP addresses to whatever I connect to the ports in the other rooms in my house?

View 2 Replies View Related

Home Network :: Belkin F5D8635-4v1 - Access Multiple Servers From One Dynamic IP Address

Jan 23, 2012

I am working with MS Windows 2008 R2 and a Belkin F5D8635-4v1 router.

I have already set up a dynamic IP address which points to my router at home. In my home network I have multiple PC's that I would like to access from the internet. I would like to achieve this without needing to change my port forwarding rules on my router each time...

My thoughts are that I use a single dynamic IP address pointed to my router. My router then forwards to a server with some sort of software that can then forward to the correct PC based on the host name.

So I have 3 domains set up all pointing to the router's IP address:

dest1.domain.com -> 41.xxx.xxx.45
dest2.domain.com -> 41.xxx.xxx.45
dest3.domain.com -> 41.xxx.xxx.45

The router is not smart enough to redirect by host name, so it will just forward everything to The server based at must then have software to now redetermine the target based on the host name. The rules would be set up as follows:

dest1.domain.com ->
dest2.domain.com ->
dest3.domain.com ->

View 1 Replies View Related

Home Network :: No Internet Via Dynamic IP?

Feb 16, 2011

If this is the wrong thread for this pasted config, I am sorry. Let me know and I will delete it and move it else where. I just cannot seem to connect my Cisco 2651xm router to the internet from my PC. Here is the output of my config. I have Cox Cable Internet and my IP address is Dynamic but it has lukily stayed "static" if you will since I can remember am plugging in my laptop via straight-through to 2950 switch port fa0/2 and fa0/1 is connected via staright through calbe to router fa0/0. I told my PC to "obtain IP address automatically" since I made my router a DHCP server, but still no internet. I can however, ping the ISP, my default-gatewat on the router,, and I made a the vative vlan and I can ping all interfaces fine and packets are being sent and received[CODE]

View 19 Replies View Related

Home Network :: VPN Tunnel With Zyxel P-661HW-D And Dynamic IP

Aug 1, 2011

I need to create a VPN tunnel between two offices of the same company. I bought two Zyxel P-661HW-D to create the secure VPN tunnel but the problem is that the two offices has a ADSL connection with dynamic IP. Is possible, with this router, to use a DDNS service to create the VPN tunnel or it' s required to have static IP ?

View 1 Replies View Related

Home Network :: Free Dynamic DNS For Top Level Domain Name?

Feb 11, 2013

I am on the lookout for free dynamic DNS for top level domain name such as example.com

There seem to be quite a few free dynamic DNS providers for third level domain but I am having trouble finding one for top level domain. I am almost on the verge of actually mapping the top level domain to a CNAME of a third level domain with dynamic DNS but I really don't want to do that.

View 2 Replies View Related

Home Network :: IP Address With Unrestricted Browsing In Network

Oct 9, 2012

Well I went to command prompt and typed command ipconfig /all and saw the ip address my system was configured to. Dunno why, but I manually set that ip address in my IPv4 internet settings and got access in my hostel. Now suddenly the access is gone. What should I say, the ip address that I set my laptop to has been shut down ? It doesnt work any more? How do I get another IP address like that which gives me no restricted browsing? What does the admin do in the laptop that suddenly it gets unrestricted browsing privileges?

View 1 Replies View Related

Home Network :: Ip Address In Same Subnet?

Nov 20, 2012

i want to give my switch a ip address with same subnet as a pc which is for eg having ip address of class a and subnet of

View 4 Replies View Related

Home Network :: Finding Out IP Address?

Oct 1, 2011

I am doing a security course and I need to find out the IP addresses of the devices on my network in order to carry out a ping of death on one of my devices. I've done the ipconfig command but that doesn't give me the information I need.

View 5 Replies View Related

Home Network :: Using Netbios Instead Of IP Address?

Mar 18, 2013

How can i connect two computer in same LAN with Netbios

View 3 Replies View Related

Block A Mac Address From Home Network?

Dec 16, 2012

How to block a mac address from my home network?

View 4 Replies View Related

Home Network :: Change Ip Address?

Jan 27, 2013

I play a game via gameranger, and i want to change my ip address. the replays for this game retain the ip of each player, so that is how it is traced. I have used various ip changers, however they only work properly when i am the host of the game. How to keep my ip protected 100% of the time, rather then only when i am hosting?

View 1 Replies View Related

Home Network :: Virtual Servers On One IP Address

Aug 6, 2012

I have one dedicated IP issued to my home, along with another dynamic one if I need it(but I don't use it). I have a webserver, mail server, and name server up and running on a single machine exposed to the internet with my static IP. I have a domain name registered to my IP address. My webserver and name server work great, but I am having difficulty with the mail server. In order to have mail work correctly, I have been told that I need to get reverse DNS setup for my domain (something I had neglected to do). My nameserver responds to reverse lookups correctly when issued locally, but it looks like queries from the internet never reach it (I think my ISP catches requests upstream). I contacted them and they put a PTR record in for my IP pointing to ns1.mydomain.com. This all works fine, but the thought occurred to me that if in my hosts file I put my MX record in as mail.mydomain.com., any mail clients that do a reverse lookup of my IP won't get mail.

View 6 Replies View Related

Home Network :: Access Point Lost Its IP Address?

May 17, 2011

To put it simply, my parents live far enough in the middle of nowhere that they have no access to high speed internet. Of course, there are always wireless solutions, but the options around here are pathetic and comparable to dialup. They were content with this; I moved back in with them for the time being and am not.y solution has been to dump just shy of $1,000 into a point-to-point wireless bridge setup that claims to have a range of 5 miles non-line-of-sight. I have one antenna set up four miles away on top of a building that has high speed internet.Unfortunately, I was a stupid fool and set that end up without enabling security, thinking that it wasn't a big deal. Nobody in that town has a mind for anything but farming and drinking. That was my mistake. Some asshole set a password and forced me to do a factory reset on the access point and now I can find no IP address. It's like it only reset halfway to factory defaults or something

View 6 Replies View Related

Home Network :: Static Port Address Translation?

Mar 24, 2011

In my router I can set rule that all traffic incoming to router's extAddr:8888, is forwarded to my intAddr:8888. But I also need reverse rule that packets originating from intAddr:8888 are translated to extAddr:8888. Can I do that? What technique can I search on google to find more information, because it is not port forwarding. I would calll it reverse port forwarding or static port address translation, but I do not find anything useful in internet searching these keywords.

View 3 Replies View Related

Home Network :: Netbios Broadcasts - What App Trying To Obtain IP Address

Dec 20, 2011

what application/service is sending out net bios broadcasts on a network segment the requests are for machines that no longer are on the network but something is trying to obtain there ip address as they are not in dns any more i am assuming this is why they are resorting to netbios broadcasts i need to some how isolate what application or service is trying to find out.

View 9 Replies View Related

Cisco WAN :: WAP4410n On A Home Network - IP Address Range?

Mar 5, 2011

I am trying to set up a WAP4410n Wireless access point and add to my home network. One problem I can't seem to get around. The IP adress range setup does not accept 1 (example as a range setup for IP address. How do i get in communication with the unit when I can't view the setup due to the factory default set as If it were I could easily change my routers IP range to include it.

View 0 Replies View Related

Windows 7 Starter Can't Obtain Valid IP Address From Home Network

Nov 9, 2012

I have recently bought a Asus Eee PC with Windows 7 starter.It will connect ok to public Wifi (i.e. at the Qantas lounge) but will not connect to my home Wifi network - Netcomm N150 Router. The two other computer at home (running full versions of Windows 7) work fine over this network.When I look at the Station list in the Router's interface the MAC address for the new laptop appears but it has no IP address. [code] Have tried the obvious things like power cycling.

View 13 Replies View Related

How To Set Up VPN With A Dynamic IP Address

Jan 19, 2011

I have a PC that I would like to access remotely though VPN. My internet service provider is Time Warner Cable and it provides me with a dynamic Ip address.

View 5 Replies View Related

Home Network :: Remote Ip Address Is Updating DNS Server But Unable To Ping It?

Apr 20, 2011

i have a new smc router and my local ip address and remote ip addresses are very similar. The remote ip address is updating my dns server but i am unable to ping it. Its something like 122.61.xxx.1 ?

View 8 Replies View Related

Wireless Home Network With Verizon Internet Security - Changing IP Address?

Dec 24, 2011

I have verizon fios internet and a wireless home network with verizon internet security and I want to ghange my IP adress on my laptop

View 6 Replies View Related

Setting A Dynamic IP Address?

Mar 9, 2013

I'm trying to set my PC to have a Static IP but I'm having no luck. I've got it working before and was able to forward ports, but that was with my old PC.My problem is when I go into my wireless properties and change the TCP/IP settings from find automatically to custom settings, it says I need to reboot my PC. I do that but no matter what I do the settings are back to default, automatic settings when I reboot.The only difference between this new PC and the old one is that this one is using an SSD for my OS and a normal HDD for my Data.

View 14 Replies View Related

Change Dynamic Ip Address In Windows 7?

Oct 23, 2012

How to change my dynamic ip address in windows 7

View 2 Replies View Related

6100 - How To Track A Dynamic IP Address

Apr 12, 2011

how can I track a dynamic IP address. The reason why I am asking is because my dad lives about 40miles from me and I would like to logon to his computer from my apt and my dad is currently using frontier dsl connection with a westell 6100 modem. Is there any software or what do I need to do to configure this?

View 6 Replies View Related

Error - Wrong Static Or Dynamic IP Address?

Mar 23, 2012

Do not have internet connectivity, despite all the lights lit on calbe modem and the ASUS WL520GU router and only the internet and ethernet lights are lit on the Linksys 2102.Despite numerous reboots, no change and even bypassing the router and connecting directly to ATA still no conectivity.When I open a browser, it reverts to the Asus error page, "reason for failed connection: You have set the wrong dynamic or static IP address, though nothing was changed.Funny thing again, a direct internet connection to the ATA did nothing.A google search only just shows lots of unasnered posts on this issue, or only the usual 'please reboot'.

View 9 Replies View Related

Do Internet Cafes Use Static Or Dynamic IP Address

Jun 29, 2012

do internet cafes use static ip or dynamic ip address. Also what would be the benefit if they used a static ip address.

View 1 Replies View Related

Cisco VPN :: 877 IPSec Tunnel With Dynamic IP Address

Aug 3, 2011

I'm having some trouble configuring 2 cisco routers (877) with ipsec vpn tunnel.The 2 of them are linked to the internet with dynamic adsl's - their ip-addresses changes all the time.when the configuration is based on ip addresses it's working ok, but when I'm trying to use host name with the DDNS feature, it's not coming up, I get a lot of errors...
I've searched google and various posts regarding that issue.It's seems like it's possible to do a dynamic-ip to dynamic-ip ipsec tunnel, but I found zero manuals and configuration.I've added the template that I'm using to configure the tunnel with ip addresses.

View 2 Replies View Related

Cisco VPN :: 2710 PIX 515E Connecting A VPN With Dynamic IP Address

Mar 6, 2011

connecting a VPN with a dynamic IP address (its a Draytek 2700)We have a customer who has a PIX515E on the central site .Than there are more 2 sites where he installed 2 Draytek 2700 ,and contracted 2 fixes IP addresses for them.These are working fine and always did.In another site they are doing building renewals ,só they will not have ADSL for about 2 month,and they connected a 3G Internet access wich is connected to a Draytek 2710 ,internet wich is working fine,but doesnt have a fixed ip address.
I had search a lot in Cisco support pages,but i can´t find this solution,cause the examples are only to 1 dynamic peer ,not mixed(multiple fixed ip addresses + 1 or more dynamic)The PIX also needs to receive VPN connections from remote users who connect via Cisco VPN client(is working fine too) [code] I know now that when a communication starts from that dynamic peer to the PIX ,PIX doesnt know in wich group he should assign it.So the communication stops.i tried to create a group-policy...but i dont know how to associate it with the tunnel group.I also know that we can just associate 1 crypto map to each interface.

View 2 Replies View Related

DLINK DIR 615 Router Settings - Internet Connect Using Dynamic IP Address

Nov 13, 2011

i have internet connection which is connect using dynamic ip address but if i add ip address in Local Area Connection i get two networks, one is internet dynamic ip & other one is ip which i setup in Local area connection. so if i select LAN network for lan clients i can access lan. but now i have DLINK DIR 615 router so what should be my settings?

View 3 Replies View Related

Cisco Routers :: RV220W - Dynamic DNS Returns Wrong Address

Jul 29, 2012

I think I'm missing a basic step here.  In setting up a RV220W device behind either a cable modem or a DSL modem, the address that is being returned is not the public IP address of the modem, but rather the private IP address assigned by the modem to the RV220W.  Doesn't matter for normal web access but trying to set up a VPN tunnel fails due to the inaccurate IP address.
If I do the same thing but use the dyndns.com application on a computer behind all of this (connected on the private LAN of the RV220W via cable), it reports the external IP address correctly.  That works in some locations if I have an always on computer to load the application to.  In some cases, however, there isn't such a computer to leave dedicated to running the separate program.
Since this works, and the RV220W doesn't, there is some difference between the Cisco implementation and the dyndns.com implementation.
So, is there a way to get the RV220W to return the true external IP address, or is it stuck returning a private address?

View 6 Replies View Related

Linksys Wireless Router :: Connecting WRT300N To Uverse Gateway - Dynamic IP Address?

Feb 6, 2012

I have a WRT300n router and want to connect to my Uverse Gateway. When I connect them & try to use the internet connection I get an error that says a connected router must be capable of using DYnamic IP addresses.

View 1 Replies View Related

Browsing From Home IP Address While Away From Home (using A Notebook)?

Oct 22, 2012

I would like to be able to browse the Internet from my home IP address while I am away from home (using a notebook)

View 6 Replies View Related

Home Network :: Advanced Home Network Setup (3 Subnets) And Port Forwarding?

Feb 24, 2013

I have a Time Warner Cable business class service with no static IP, with a wireless modem which is plugged to a CAT5 distribution panel. On the jacks (2 other rooms on the house) I have a Linksys E3000 and a Linksys Valet router for signal boost and gadgets usage (TV, cameras, etc).The main router (TWC) has it's own external IP which TWC assigns to me and internally distributes via DHCP the range 192.168.0.x. With that said:

- The E3000 has a IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The Valet has a IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The main router has the as the gateway and web-interface

Whenever I connect something to the E3000, it is distributing the 192.168.1.x range and the valet 192.168.2.x range.That works perfectly for my home based business until I decided to use more stuff on the network such as a IP printer, IP cameras, etc.

- The IP cameras are connected to the E3000 due to signal strength and I have manually assigned them the and IPs and ports 9001 and 9002.

- The printer is connected to the E3000 and I have manually assigned the IP

Issue 1: Port forwarding On the main router (TWC - UBEE) I have tried to setup a port forwarding by informing the Local IP as (E3000 IP), Internal Port 0, Public Interface IP (, Ext Start Port 9001, Ext End Port 9001, Protocol - Both, Enabled Yes. On the E3000 I did the same config (screen shot attached e3000.png).This is not working properly. I can't get into the camera.

Issue 2: Printer/ The printer is only accessible if I connect to the E3000 (because it is on the 192.168.1.x network)

Issue 3: How to configure all the devices on the same subnet? If I want everyone to be on the 192.168.0.x network, how to configure properly the E3000 and the Valet? I have tried to force them into the same network but it would not work properly. It would not get an IP from the UBEE router (main).

View 5 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved