Home Network :: Free Dynamic DNS For Top Level Domain Name?
Feb 11, 2013
I am on the lookout for free dynamic DNS for top level domain name such as example.com
There seem to be quite a few free dynamic DNS providers for third level domain but I am having trouble finding one for top level domain. I am almost on the verge of actually mapping the top level domain to a CNAME of a third level domain with dynamic DNS but I really don't want to do that.
View 2 Replies
ADVERTISEMENT
Feb 11, 2013
I am on the lookout for free dynamic DNS for top level domain name.There seem to be quite a few free dynamic DNS providers for third level domain but I am having trouble finding one for top level domain. I am almost on the verge of actually mapping the top level domain to a CNAME of a third level domain with dynamic DNS but I really don't want to do that.
View 3 Replies
View Related
Dec 17, 2012
What's the best free dynamic DNS provider?
I found a ton of them on the internet but I'm not sure which ones are safe.I'm trying to use my home NAS as an ftp server that can be accessed remotely.
View 3 Replies
View Related
May 3, 2011
I am wondering if there is any way to get the name and last name of the person that has the internet connection corresponding to a particular dynamic IP address that I know, that was used to send an email at a particular date and time that I also know.
View 5 Replies
View Related
Feb 16, 2011
If this is the wrong thread for this pasted config, I am sorry. Let me know and I will delete it and move it else where. I just cannot seem to connect my Cisco 2651xm router to the internet from my PC. Here is the output of my config. I have Cox Cable Internet and my IP address is Dynamic but it has lukily stayed "static" if you will since I can remember am plugging in my laptop via straight-through to 2950 switch port fa0/2 and fa0/1 is connected via staright through calbe to router fa0/0. I told my PC to "obtain IP address automatically" since I made my router a DHCP server, but still no internet. I can however, ping the ISP 24.253.136.243, my default-gatewat on the router, 192.168.0.1, and I made a the vative vlan 192.168.0.2 and I can ping all interfaces fine and packets are being sent and received[CODE]
View 19 Replies
View Related
Aug 21, 2012
I am using several SG300-28 Switches with firmware version 1.1.2.0.I have dynamic VLAN enabled. As RADIUS server I am using free radius 2.1.12.Authentication is only based on the MAC address. (I configured that on the switches)On the switches I created three VLANs. VLAN100 for the authenticated clients, VLAN200 for Management interface and VLAN300 as Guest VLAN. After a wrong authentication the clients should be put into this Guest VLAN immediately (I configured this on the switches). I am using Windows XP and Windows 7 clients in my network. I did not configure any EAP settings because I just wnat to use the MAC address.
In most cases the dynamic VLAN assignment and authentication is working fine. The switch log says that the client is authenticated and the same I can see on free radius log. But in some (rare) cases the client is rejected. The CISCO log says "MAC aa:bb:cc:dd:ee:ff was rejected on port ge17" but when I look at the free radius log then this MAC address was successfully authorized.
The problem is that the client gets an IP address based on the Guest VLAN300 but after that the switch seems to "switch" the VLAN on the port and then the client is authenticated correctly on the right VLAN but the client does not request a new IP on the new VLAN. If I unplug and re-plug the LAN cable in most cases the client get the correct VLAN and the correct IP. This is happening randomly on nearly all my PCs.
Do I have to set some timers higher ? I don't think it is a problem between switch and RADIUS but a problem between communication of the host and the switch.
View 14 Replies
View Related
Aug 1, 2011
I need to create a VPN tunnel between two offices of the same company. I bought two Zyxel P-661HW-D to create the secure VPN tunnel but the problem is that the two offices has a ADSL connection with dynamic IP. Is possible, with this router, to use a DDNS service to create the VPN tunnel or it' s required to have static IP ?
View 1 Replies
View Related
Apr 15, 2013
what i am trying to accomplish is to set up a domain for my home network. the domain is going to consist of 2 server boxes both running ubuntu 12.10 server edition and a client machine running windows XPone linux box will be my DC using samba and the other will host email, and apache2 web services.i dont know if you need all of this info but in my experience its best to be thorough.I registered a domain through godaddy.com and made it point to my home IP address. now what happens because all of my machines are behind a router is when i type in my URL it brings up the login request for the cicsco webinterface. what i would like to happen is that my router points traffic to the ip address on my home net work 192.168.1.XXX that is hosting the apache2 webserver.I would also like to connect the client(XP) machine to the domain controller but i keep getting an error that says that the domain does not exist. I have been through the samba settings and they are exactly the same as when i set them up for a mock PDC using "example.com" as a domain name
View 1 Replies
View Related
Dec 19, 2011
I have a high speed wireless DSL router from my ISP (Telus). I use one port off the router to connect directly to my desktop computer. Another port is connected to a switch to which ethernet cables to three other rooms are connected. My problem is that when I connect my Bell PVR (9242) to the 'switched' ethernet cable, I'm apparently not able to get a dynamic ip address, which the Bell unit requires, and can't connect to the network.can I connect another router, in place of the switch, to deliver dynamic IP addresses to whatever I connect to the ports in the other rooms in my house?
View 2 Replies
View Related
Jan 23, 2012
I am working with MS Windows 2008 R2 and a Belkin F5D8635-4v1 router.
I have already set up a dynamic IP address which points to my router at home. In my home network I have multiple PC's that I would like to access from the internet. I would like to achieve this without needing to change my port forwarding rules on my router each time...
My thoughts are that I use a single dynamic IP address pointed to my router. My router then forwards to a server with some sort of software that can then forward to the correct PC based on the host name.
So I have 3 domains set up all pointing to the router's IP address:
dest1.domain.com -> 41.xxx.xxx.45
dest2.domain.com -> 41.xxx.xxx.45
dest3.domain.com -> 41.xxx.xxx.45
The router is not smart enough to redirect by host name, so it will just forward everything to 10.0.0.20 The server based at 10.0.0.20 must then have software to now redetermine the target based on the host name. The rules would be set up as follows:
dest1.domain.com -> 10.0.0.22
dest2.domain.com -> 10.0.0.24
dest3.domain.com -> 10.0.0.26
View 1 Replies
View Related
Jan 8, 2012
where can i find a sub to rs232 driver free download??
View 1 Replies
View Related
Jun 30, 2012
Cannot join Domain with Windows 7 home premium.
View 2 Replies
View Related
Feb 5, 2013
I am using a (Windows 7 OS) machine from work (that has a domain name set) at home and want to connect it to my home's workgroup so that I can access files on two other computers currently in the workgroup: one running windows 7 the other xp.
View 1 Replies
View Related
Dec 30, 2011
I have a Windows 7 Laptop that need to be able to join a Home Workgroup as well as an office Workgroup. How!
View 1 Replies
View Related
Jun 6, 2011
I have purchased a domain name through a registrar. I currently have a hyper v lab set up at home with a domain controller/dns server and am thinking of starting a web server on either Apache or IIS on a different virtual machine. I want to point my domain name to my home web server.What do I do I have to do at my domain name registrar? I have to point a type of dns record to my home server's public IP and maybe vice versa.I have a static IP at home. Do I have to create some DNS records pointing from my domain name registrar to my server at home using my PUBLIC ip address? If possible please provide specifics on which records I should point to my home server PUBLIC ip address and if any DNS changes need to be made within my domain. Also if any records on my home domain (windows ad domain setup)
I seem to be able to find a lot of info on Apache and IIS but not a whole lot of info on how your web domain name registrar relates to your own web server . I'm not really interested on IIS or Apache specifics but more interested in the fundamentals of how a domain name registrar (GoDaddy, or any other registrar/host) needs to be pointed to your web server and vice versa. I know a lot of people on forums tend to point to links or tell me to go to google but I find it hard to learn that way.
View 3 Replies
View Related
Nov 22, 2011
I have just moved into a new office and I have free internet, but I would like to set-up my network multi function printer in the same office.I don't have a router in my office I just have the socket (presumably from the building owners cabinet). Adding another network card.I tried removing the internet cable from my PC and setting up the printer by creating a TCP port but it didn't work. (I used to do this with my HP 1050tn).RouterI tried adding a router but that didn't work either.
View 6 Replies
View Related
Jul 26, 2011
I wonder if there is a free programme that will let me look at network traffic/activity on my network, i'm having real issues with with access and the slow down of the network. Unfortunately my switches are not managed.
View 2 Replies
View Related
Dec 28, 2012
I would like to set up a free wireless network in our local church hall for the local teenagers to use on the way home from school.We have an ADSL router and an office computer that we would need to keep secure.Obviously we'll need a wireless hub, but keeping the public wireless separate from the Ethernet connected PC is essential.
View 7 Replies
View Related
Feb 24, 2013
I have a Time Warner Cable business class service with no static IP, with a wireless modem which is plugged to a CAT5 distribution panel. On the jacks (2 other rooms on the house) I have a Linksys E3000 and a Linksys Valet router for signal boost and gadgets usage (TV, cameras, etc).The main router (TWC) has it's own external IP which TWC assigns to me and internally distributes via DHCP the range 192.168.0.x. With that said:
- The E3000 has a 192.168.0.6 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The Valet has a 192.168.0.7 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The main router has the 192.168.0.1 as the gateway and web-interface
Whenever I connect something to the E3000, it is distributing the 192.168.1.x range and the valet 192.168.2.x range.That works perfectly for my home based business until I decided to use more stuff on the network such as a IP printer, IP cameras, etc.
- The IP cameras are connected to the E3000 due to signal strength and I have manually assigned them the 192.168.1.15 and 192.168.1.16 IPs and ports 9001 and 9002.
- The printer is connected to the E3000 and I have manually assigned the IP 192.168.1.30.
Issue 1: Port forwarding On the main router (TWC - UBEE) I have tried to setup a port forwarding by informing the Local IP as 192.168.0.6 (E3000 IP), Internal Port 0, Public Interface IP (0.0.0.0), Ext Start Port 9001, Ext End Port 9001, Protocol - Both, Enabled Yes. On the E3000 I did the same config (screen shot attached e3000.png).This is not working properly. I can't get into the camera.
Issue 2: Printer/ The printer is only accessible if I connect to the E3000 (because it is on the 192.168.1.x network)
Issue 3: How to configure all the devices on the same subnet? If I want everyone to be on the 192.168.0.x network, how to configure properly the E3000 and the Valet? I have tried to force them into the same network but it would not work properly. It would not get an IP from the UBEE router (main).
View 5 Replies
View Related
Nov 4, 2012
driver of network controller for dynabokk Toshiba laptop T552/58FBI
View 1 Replies
View Related
Apr 29, 2013
I have a problem where clients cannot roam between Cisco 1231g-e-k9 and recently installed cisco 1242g-e-k9 access points.. On looking at the CDP option on the 1231 and 1242 access points they are all aware of each other. However if I use the Network View option I see a different picture. All the 1231 access points can see each other but not see the 1242's. Network View on the1242 shows all the 1231's but none of the 1242's. The 1231 are running ver. 12.3(8)JEB and the 1242's are running ver. 12.4(21a)JA1.
View 2 Replies
View Related
Jul 2, 2012
I own a Dell XPS M1330 laptop (Windows 7 Home Premium 32 bit, service pack 1) that is about three and a half years old. I realize this Dell model has been discontinued. Work with me here. I STRONGLY believe after 6+ hours of personal troubleshooting that the laptop model is NOT the problem. I have lived at the same apartment complex the entire time I have owned this laptop. Up until a month ago when a new management company (the third one I’ve had) took over, I was able to use the free WiFi they offer at the office and the laundry room without one single speck of a problem weekly for YEARS. Suddenly I am getting: Unidentified Network: No Internet Connection with a public park bench (which it is a public network, I suppose) and a “!” over my perfect five bar signal. Therefore, we can rule out signal strength as the problem. I have a Dell Wireless 1395 WLAN Mino-Card, the card that came pre-installed with the laptop when I bought it brand new. Also, I know the Dell Wireless Card WLAN Utility is installed on this computer but I’ve always used Windows Network and Sharing Center to control the WiFi network I am connected to. I saw something somewhere about this maybe being the problem but since I’ve never used it I don’t think it has anything to do with my problem…
Talk about the router will be brief as it is my apartment complex they will not allow me access to the router so I know virtually nothing other than it is a Cisco wireless router, there are three office computers connected to it that run the internet just fine, and DCHP is enabled on both my laptop and the router (I may or may not have snuck in against their wishes to figure this one out…).
Also noteworthy are two things. One: I can connect to about a dozen other public WiFi networks around the city malls, coffee shops, bookstores, the college campuses, ECT. So connecting to WiFi is not the problem, this WiFi network specifically is (AKA. My NIC is NOT dead). I can also connect to my boyfriend’s private network at his house. The second thing worth noting is that once, I got the manager to cave and re-set the router for me. It connected! I re-started my computer and it still connected! I took my laptop back to my apartment, brought it back re-booted an hour late and it still connected! The next morning; back to the same old annoying problem. I asked him if they did ANYTHING with the computers at night and he said no.
As I stated, I have 6+ hours of troubleshooting pre-done on this problem. I have tried what I am able to with no access to the router (okay, maybe I snuck in and did a couple more things…) including:
Re-start laptop.
Re-start router.
Disable all firewalls/virus protection programs/ect.
Connect to the internet in Safe Mode.
Disable Bonjour.
Uninstall wireless card/re-install wireless card/un-install drivers/re-install drivers/update drivers.
Reset the TCP/IP stack.
[code].....
View 7 Replies
View Related
Apr 26, 2011
my customer has FreeRadius, and I'm trying to get the server to assign a network admin role to a 5K running 5.0.3 code.This is based on the example given in this document: url...The server authenticates the user name, but will only put the user into the network operator role. This is confirmed by checking the output of show user-account and debug security user-db.The Radius test using the same credentials passes the authentication test. I'm sure the problem is that the N5K dosent understand the VSA format of the attribute, and that this is a simple syntax problem.
View 2 Replies
View Related
Mar 29, 2011
i want to know how to access printer remotely,mean when the user is not in the network. .in domain network
View 1 Replies
View Related
Oct 20, 2011
Here's the layout: Cable modem in the basement. Several devices in which I'd prefer a wired connection in the basement. Upstairs on the 1st and 2nd floor of the house are many devices in which wifi is fine or preferred.Here's the problem: As you might guess, wifi is weak upstairs and certainly on the patio and 2nd floor. I have an access point upstairs that I've experimented with but it is flaky.
View 1 Replies
View Related
Nov 10, 2011
How to install a wireless network in home environment?
View 6 Replies
View Related
Jan 14, 2012
I am a new student in networking, taking the CCNA courses, and now want to rewire my home. I currently have a cable modem and E2500 setup running my network. I want to get the modem and router out of my computer room and in the basement where the cable enters the house. I want to do this to clean up the computer room wiring a bit and to run line drops to different rooms in the house where the internet will be utilized.Currently there are two PC's, a laptop, a tablet, sometimes a phone, and an XBOX using the internet. I want to get my printer back up and running on the network but thats another story. Only one PC is currently hardwired. I would like to run two cables into the room with the PC and XBOX that are currently using wireless, at least two into the computer room for the PC and network printer, and one or two into the living room for the blue ray player and possibly an internet tv.
View 1 Replies
View Related
Sep 10, 2011
I have a D-Link DGL-4500 router and my landlord recently ungraded our internet connection. However, now I get this error message when I try to hook it up to the ethernet hub,"The addressing of the Internet side learnt thru DHCP conflicts with the addressing selected for the LAN side. Internet communications will be disabled until you have changed the LAN side addressing to resolve the problem."
View 3 Replies
View Related
May 7, 2011
I am using Charter and have been at this location for several year. All was well until they added one of those "walled gardens" like Comcast uses.When the cable modem comes on, and the wireless router is turned on, the router has trouble getting it's dynamic IP from the network. If I plug my workstation directly into the cable modem - bingo - IP comes very quickly every time.I have tried multiple cable modems and multiple wireless routers. I use MAC cloning otherwise Charter doesn't give an IP ever. I have tried using both Unicast and Multicast for getting the IP but, it seems like the routers request/respond to DHCP differently than a Windows PC (Vista and 7) does. If a computer and router use DHCP differently? It is weird because when there is a power outage things generally come back on without a hitch. Though if I unplug/plug the devices manually it takes me half an hour or more to get an IP most times.
View 1 Replies
View Related
Feb 18, 2013
Region : Germany
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : V1
ISP : Kabel Deutschland
the firmware offers 3 different dyndns services. But opendns is not included, also there is no free field to choose protocol, server, password and network. Will this be updated in further firmwares?
View 3 Replies
View Related
Jul 31, 2011
i configured a network domain out of which i connected several machines to a single user via 8 port switch. earlier the machine was working. now a days when i log on to server through user it allows me to log on. i am having two problem. i am no longer able to see the entire network on server. when i try to connect to server, the user machine asks user name and password which is quite routine. when i provide user name and password it gives the message that "logon unsuccessful the username and password are the same which you entered at user logon" when enter the user name and password of server it allows me to go inside. after rebooting the problem persists.
View 1 Replies
View Related
Aug 20, 2012
i am finding an ip address which is some hardware laptop or something that has got that ip from our doimain network while connected to our network. I dont know who it is and what it is and i always use Advanced Ip scanner and shut down any pcs manually with it and search for illegal hardwares connected to our lan but thisone is unable to be turned off it says unsuccessfull.Is there any software that allows me to kick out hardwares from our domain network?
View 4 Replies
View Related
Jun 29, 2012
I am running Windows Server 2003 with 10 computers running XP connected on a domain network. When i go to my network places - entire network - microsoft windows network - click on domain - i can see all other pc connected here but when i click on them they are asking for username and password. Even if i give username and password they are not opening, i even tried to give Server username and password but it is not working. (All my xp machines have different username and password).
How do i get access to these pc folders? Do i need permission for server?
View 10 Replies
View Related