Cisco AAA/Identity/Nac :: Nexus 5K With Free-Radius Assigning Network-operator Role
Apr 26, 2011
my customer has FreeRadius, and I'm trying to get the server to assign a network admin role to a 5K running 5.0.3 code.This is based on the example given in this document: url...The server authenticates the user name, but will only put the user into the network operator role. This is confirmed by checking the output of show user-account and debug security user-db.The Radius test using the same credentials passes the authentication test. I'm sure the problem is that the N5K dosent understand the VSA format of the attribute, and that this is a simple syntax problem.
View 2 Replies
ADVERTISEMENT
Feb 7, 2011
I am using ACS 5.2 and attempting to authorize users through TACACS to Nexus 5.1 code. I seem to have ACS setup correctly based on documentation I received through here. The problem is that the NX/OS doesnt seem to be operating as expected.
View 2 Replies
View Related
Feb 3, 2007
We have several ASA 5510 firewalls which are being used as VPN gateways.RSA SecurID is the authentication mechanism using native SDI connectivity. No ACS server is being used.Is it possible to assign user Group and other attributes (such as ACL), using the SecurID RADIUS server? I know this is what the Cisco ACS is for, but is it possible using the RSA RADIUS server itself?
View 11 Replies
View Related
Mar 24, 2013
i am trying to assign a right role for a user who authenticates to nexus 7k switch via radius. i am using cisco ISE version 1.1.1.268 and the nexus version is 5.0.2,I have created a role on nexus.
View 1 Replies
View Related
Mar 13, 2012
I have setup my radius server access on the Nexus but am unable to authenticate through putty. If I do a radius-server test on the Nexus it says I authenticate. Here is the log I am getting.
2012 Mar 14 16:03:21 switch-a %AUTHPRIV-4-SYSTEM_MSG: pam_unix(aaa:auth): check
pass; user unknown - aaad
[Code].....
View 1 Replies
View Related
Apr 13, 2011
I can authenticate between our MDS 9216i switch and RSA radius server but my role does not come across. The logged in user is a network-operator not admin. In the AV Pair i have defined shell:role*network-admin but it doesnt seem to come across
View 4 Replies
View Related
Oct 25, 2011
Login to N5k is managed centrally from a cisco ACS server ver 5.2
Goal: Role base access for (1) Network Admin and (2) Storage admin in such a way that network guy and storage guy has controll on their seperate domain.
View 1 Replies
View Related
May 3, 2011
Is there any way to link the Role-based CLI views created in the AAA client to the user created in the ACS 5.2 server? I know that you could do that in ACS 4.2 by using the “cli-view-name” attribute.What I have in mind is to login with some user and that the ACS 5.2 server links this user with a view previously created in the AAA client:This is what I would like to achieve:view configured in the AAA client:parser view DiData secret 5 $1$jPNA$gr9o8gGNmWh9sk8Axbfx91 commands exec include copy running-config ftp commands exec include copy running-config commands exec include copy startup-config ftp commands exec include copy startup-config commands exec include copy commands exec include all show Login to the device using a user created on ACS 5.2 and linked to the above DiData view:
telnet xx.xx.xx.xx
username: cenetacspassword:
Router#?Exec commands: <1-99> Session number to resume copy Copy from one file to another enable Turn on privileged commands exit Exit from the EXEC show Show running system information
Router#
Typing the command "enable view something" is not an option for us.
View 1 Replies
View Related
May 1, 2012
Any free radius server for lab purpose?
View 5 Replies
View Related
Aug 21, 2012
I am using several SG300-28 Switches with firmware version 1.1.2.0.I have dynamic VLAN enabled. As RADIUS server I am using free radius 2.1.12.Authentication is only based on the MAC address. (I configured that on the switches)On the switches I created three VLANs. VLAN100 for the authenticated clients, VLAN200 for Management interface and VLAN300 as Guest VLAN. After a wrong authentication the clients should be put into this Guest VLAN immediately (I configured this on the switches). I am using Windows XP and Windows 7 clients in my network. I did not configure any EAP settings because I just wnat to use the MAC address.
In most cases the dynamic VLAN assignment and authentication is working fine. The switch log says that the client is authenticated and the same I can see on free radius log. But in some (rare) cases the client is rejected. The CISCO log says "MAC aa:bb:cc:dd:ee:ff was rejected on port ge17" but when I look at the free radius log then this MAC address was successfully authorized.
The problem is that the client gets an IP address based on the Guest VLAN300 but after that the switch seems to "switch" the VLAN on the port and then the client is authenticated correctly on the right VLAN but the client does not request a new IP on the new VLAN. If I unplug and re-plug the LAN cable in most cases the client get the correct VLAN and the correct IP. This is happening randomly on nearly all my PCs.
Do I have to set some timers higher ? I don't think it is a problem between switch and RADIUS but a problem between communication of the host and the switch.
View 14 Replies
View Related
Mar 2, 2013
I have a WLC 2106 with two AP's connected, But have not set up any authentication. I don't have CSACS at my disposal, so I thought I would try FreeRadius on my Linux Server. I am looking for User/Password auth, and for now I would expect to have those accounts local to the FreeRadius engine. (baby steps before I try PAM/LDAP/AD/Certs )
I have seen a number of posts asking final step questions. I was looking for more of a where to begin How To.
I have read the docs on Free Radius, and believe I have the method worked out on how to make a small change, run in debug mod to observe my change, to verify that I don't spend too much time pulling out my hair. I am fairly adept at CSACS 5.3 but it hides the magic of Radius from me.
View 4 Replies
View Related
Apr 19, 2011
I am trying to integrate Cisco ACS 5.2 in a network to do device authentication of switches for administrators.
I am not sure if Cisco ACS 5.2 support RADIUS protocol to do device authentication. In the configuration of the Cisco ACS 5.2 I can only see TACACS authentication for device authentication and I have configured it and it works. If CISCO ACS 5.2 supports RADIUS auth for device authentication?
View 1 Replies
View Related
Feb 6, 2012
I was wondering if i should use the same RADIUS VSA attribute on ACS v5.1 to authenticate AAA clients as those i was using on my old ACS v3.3 server.
Example : under ACS v3.3 i was using RADIUS (Cisco Aironet) attribute to authenticate AP & WLC, should i do the same under ACS v5.1 ?
View 2 Replies
View Related
May 1, 2013
I'm trying to configure ACS 5.4 as radius server for network access (PPP connections).In monitoring and reports the users have green color , but the clients cannot send data. Auth method is CHAP/MD5.
Allowed protocols are set to CHAP and PAP only.
View 5 Replies
View Related
Apr 11, 2013
I'm trying to use 802.1x to authenticate clients on my network with dynamic VLAN assignment from RADIUS. We have IP-Phones(powered by PoE) that only supports EAP-MD5, and we would rather use MAB(it also uses LLDP-MED for some settings) to authenticate the phones using the MAC-range from the phones vendor. The following scenario works perfect:Connect the phone and let it boot up(takes a while) and authenticate with MAB.Connect a computer in the phones data-port and let it authenticate with 802.1x(or fail and reach guest-vlan) However, the following scenario doesn't work:The computer is already connected to the phoneThe phone is then connected to the switch What happends now is that the computer is authenticated using 802.1x before the phone boots up and get's authenticated with MAB. When the phone is ready, it's authenticated with MAB and everything works. However, after a short period(let's say a minute), using `debug authentication all`, we see a "NEW LL MAC: phones mac" message(which is weird since the mac has already been MAB-authenticated), and then we are unable to contact the phone using ping. When I check `show mac address-table` it has now moved the mac from `Port Gi 0/12` to `Port Drop`. However, if I check `show mab interface Gi 0/12` or `show authentication sessions` it lists the phones-mac as `mab auth sucess `.why the first scenario works, and not the second?
The switch is a 3560E PoE 24p with IOS 12.2.58SE2. Sample of the switch-config: network-policy profile 1voice vlan 90!interface GigabitEthernet0/12switchport mode accessnetwork-policy 1authentication control-direction inauthentication event fail retry 1 action authorize vlan 60authentication event server dead action authorize vlan 60authentication event no-response action authorize vlan 60authentication event server alive action reinitializeauthentication host-mode multi-domainauthentication order mab dot1xauthentication priority mab dot1xauthentication port-control autoauthentication periodicauthentication violation replacemabdot1x pae authenticatordot1x timeout tx-period 5dot1x max-reauth-req 1spanning-tree portfast!Btw, when we tried authenticating the phones using 802.1x too (EAP-MD5), there are NO problems in any of the scenarios. However, we want to use MAB instead of 802.1x to avoid the requirement of configuring the phones with a username and password. The RADIUS response was the same when using 802.1x as it is with MAB for the phones (including device-traffic-class=voice AV-pair).
View 2 Replies
View Related
Jun 5, 2012
Configuring radius authentication on Nexus 7k?I have heard once you have configured the radius you are only able to run show commands on it.
View 1 Replies
View Related
Jan 19, 2013
I am facing issue with nexus 7010 login authentication by radius server. I have two nexus 7010, one of them is working perfectly. Other taking long time to authenticate. If i use local database to login it works perfectly. It works fine also if i login from console using radius for authentication.
View 1 Replies
View Related
Oct 30, 2011
I am currently useing ACS 5.2 and have no problem using Tacacs+ with AD access.
But with Radius it seems I can only get the Local identity store to work, need to do something special to get Radius to work with active directory with Cisco ACS?
View 10 Replies
View Related
Nov 7, 2012
I am doing Activity 6-1: Basic VLSM Calculation and Addressing Design (6.4.1) in the ccna book.the lab can be seen here: (mellowd - link removed) I've done the topology and assigned the addresses appropriately as shown in the first table. My question is on Task 2 Step 2."Assign the first available subnet to HQ LAN1."
View 4 Replies
View Related
May 17, 2011
My local DHCP server mis-assigns IP Addresses of 192.168.x.x to laptops every morning.It has been suggested that one of my print servers (two Fierys and a Creo) is pushing 192.168.x.x onto the network but I think I've ruled that out. have an XP Pro desktop running a standard Windows bridge that connects a wireless Netgear router to the local Cisco switch. This has worked flawlessly for a couple of years so I hesitate to blame the bridge.My remote IT dept pushed a change/update to all locations having to do with address lease duration. I do not know details.Is there a way I can identify the source of the problem if I do not have admin access to the DHCP server? The only local control I have is to cycle power.
View 13 Replies
View Related
Nov 22, 2011
I have been trying to get our IPS (ASA-SSM-10 and 4260) to authenticate with Cisco Radius ACS 5.2 and they are not working. However, I was able to get them working with Microsoft Radius. Below is the logs from the IPS:
evStatus: eventId=1321566464942057375 vendor=Cisco originator: hostId: NACAIRVIDLAB1 appName: authentication appInstanceId: 350 time: 2011/11/23 17:50:38 2011/11/23 09:50:38 GMT-08:00 controlTransaction:
[Code].....
View 0 Replies
View Related
Dec 3, 2011
I need to configure RADIUS VSA configuration for a my alvarion device. Following are the attributes that need to be configured.
- Packet Data Flow ID (ID 1, integer16)
- Direction (ID 4, integer8)
- Transport Type (ID 6, integer8)
- UplinkQoSID (ID 7, integer8)
- DownlinkQoSID (ID 8, integer8)
[code]....
I was able to configure the first 6 attributes, how can I add the Sub - TLV's ClassifiedID, Priority, VLAN-ID and Classifier Direction which come under Classifier. Don't see any option for that in ACS 5.x
View 1 Replies
View Related
Jan 31, 2012
We have 2 ACS 4.2.1 servers in Windows 2003 with SP2 installed. We have updated the first ACS to the latest patches for Windows. After that we started having problems. CSRadius either stops by itself or when some time passes we get the following error in Failed attempts "Unknown error". When we restart the ACS services by the GUI, it resumes until the next time it stops.Do you happen to know if we have any bugs related to Windows patches?
View 3 Replies
View Related
Mar 25, 2013
I am trying to configure AAA authentication and authorization with Cisco 3725 (IOS 12.4(17)) for 802.1x and ACS 4.2 with VLAN assignment to my Windows XP client. (trying to assign VLAN 100 in my scenario).When user connects to the Router, it passes the authentication process (EAP-MD5). In my debug i see that Router recieves the Radius Attributes BUT does not apply anything!My running config:
Building configuration...
Current configuration : 1736 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
[code]......
As a result the vlan-switch data based does not change.
View 3 Replies
View Related
Mar 10, 2011
I have a questión about radius authenticaction with AD, when I log in into the network with user in AD and I make a mistake in password my radius authenticaction event in ACS 5.2 dont show me this logg. only show the authentication succeeded but dont show me the authentication failed. Maybe i must to enable same service to show the authentiaction failed. The Voice authetication works fine..
This is the confg in the port of the switch:
interface FastEthernet0/12 switchport mode access switchport access vlan 2 switchport voice vlan 10 authentication port-control auto authentication host-mode multi-domain authentication violation protect authentication event fail action authorize vlan 11 authentication event fail retry 2 action authorize vlan 11 authentication event no-response action authorize vlan 11 authentication periodic authentication timer reauthenticate 60 mab dot1x pae authenticator dot1x timeout tx-period 10 dot1x max-reauth-req 3 spanning-tree portfast end
Vlan 2: DATA
Vlan 10: VOICE
Vlan 11: GUEST
View 1 Replies
View Related
Apr 10, 2012
I have the next config of radius authentication:
aaa new-model
aaa authentication login default group radius local
aaa authorization exec default group radius local
aaa session-id common
ip radius source-interface Vlan31 vrf LEGACY
[Code] .....
View 3 Replies
View Related
Mar 17, 2012
I want to add Radius attribute to Rad ware devices , so I will have the option to grant "read only" permission to users. as I understand I need to add VSA for the "read only" permission, or configure specific "Service-Type value 255"
in the following picture you can see the required information from Rad ware:
View 1 Replies
View Related
Mar 28, 2013
I am using the Self RADIUS server in my Cisco ACS SE 4.2 appliance S. I have an AAA client C that interacts with S by means of the RADIUS protocol. This works fine, in that S correctly carries out authentication chores on username/password (PAP and CHAP) pairs received from C, sending back to C the corresponding Access-Accept packet when the authentication succeeds, or Access-Reject when it doesn't.
I have been able to import a set of three VSAs into S. Each of those attributes is of string type. I then configured in S a single user U with password P so that, whenever a U/P pair received in S from C is authenticated by S, S should send back to C, in the Access-Accept packet, the three attributes with the following values: [code]
With this setup, when an authentication is successfully completed by S, C receives 53 bytes worth of data from S every time. I am attaching a typical example, already disassembled. I have disguised the actual vendor ID, for legal reasons, but the rest is exactly as it was when received in C.
According to the disassembly, what we got is an Access-Accept packet, as expected. Its length is 53 bytes - again as expected, for this is the only packet that C has received from S here. However, the packet is incomplete, for attribute #3 is missing its value field.
Looking into the whole packet in more detail, it can be seen that while the wire format for the first attribute, namely, Frame-IP-Address, is correctly constructed, the remaining are not. For example, the sequence of bytes corresponding to the attribute #1 reads 1a 09 00 00 xx xx 2c 61 62 63. I believe that this is incorrect; it should be 1a 0a 00 00 xx xx 2c 61 62 63, for the wire format for this attribute consists of 10, not 9, bytes. I tried a few variations on the values for the attributes, and the results are always substantially the same, in that the wire formats for these attributes are always incorrect.
This all probably implies I have done something wrong when importing the VSAs into S, and/or when configuring things on S. I am therefore attaching the csv files I used to import my VSAs into S; as before, names and vendor ID are disguised, but their lengths are exactly the same as in the undisguised file. I used two csv files: One to import the vendor ID, and the other to import the VSAs under that vendor ID. As for user U, in S's administration GUI I clicked on User Setup and selected user U, moved to the bottom of the screen, where the attributes for this particular vendor were present,introduced the values for each attribute mentioned above, and made sure that button in front of each attribute was ticked.
View 2 Replies
View Related
May 16, 2012
I need to add OPNET Radius attributes in ACS 4.2. How should I add a new VSA in ACS? The google search is pointing me to CSUtil.exe, and I cannot find this utility in the ACS install files. These are the values that I need added for OPNET. When configuring the RADIUS server to support the ACE Live Appliance, use the following Vendor Code and Vendor Specific Attribute (VSA): Vendor Code: 7119 VSA: 33.
View 2 Replies
View Related
Feb 27, 2012
When I upgraded my cisco 3750 ME from c3750me-i5k91-mz.122-46.SE to c3750me-i5k91-mz.122-58.SE2.bin all commands for radius disappeared? However, there are a lot of commands to ldap which was missing in the previous version. Seems as if the radius has disappeared and been replaced by ldap?
View 1 Replies
View Related
Feb 27, 2011
I am trying to configure ACS 5.1 to authenticate SSL VPNs on an ASA5500 and aslo to provide admin access to the ASA5500 both via radius.I want to authenticate the VPN against a SeureID appliance and the admin login against a different database (using internal for testing but will use LDAP in the end).I cant seem to get the ACS to distinguish between the two authentication types. If I create a rule that says match protocol radius I can point that at either database but if I try saying match radius and service type 5 it doesnt match the VPN and falls through to the default authentication service. I have also tried matching service type 6 for admin and that doesnt seem to work either.In the end what I want to acheive is to authenticate teh ASA5500 VPN against the SecureID appliance and then admin access to all devices on teh newtork (a mixture of Cisco, F5 and Juniper) to active directory via LDAP where if the user is a member of the "admin" group they get access.I was intending to use specific devices for the ASA5500s (there aretwo) and then creat a device group based on IP address range for everything else.
View 4 Replies
View Related
May 24, 2011
I am trying to authenticate on Juniper NSM express using cisco ACS 5.2. The request is arriving at the cisco ACS but i am getting the following error.RADIUS requests can only be processed by Access Services that are of type Network Access.
View 4 Replies
View Related
Nov 18, 2012
I have CISCO ACS 5.1 radius for VPN on ASA and tried to configure an NDG on it for AIRONET 1260 too and worked fine with IEEE 802.1x CISCO EAP-FAST authentication As I had some trouble to let users to authenticate only on VPN if are VPN users and only on CISCO AIRONET if need only WIFI AIRONET I tried exception policies rules but something not working. VPN was ok but not WIFI access denied for rule policy access I decided to install CISCO ACS 4.x on Windows 2003 that is on ACS 5 DVD I created NDG as done on ACS 5 put a shared secret , put on AIRONET too as done for ACS 5 but I receive an error against ACS 4.x To troubleshout it I tried [URL] but not work ! I think to have done all fine owever on ACS 5 it worked in 5 minutes I searched log inside ACS 4 and found "Invalid message authenticator in EAP request" and I found this: [URL]Changed shared secret more times but ever not workign with ACS 4 I need to have user and password prompt on client trying to authentincate on AIRONET WIFI and I need ACS INTERNAL USER no active directory, no LDAP , no external user database?
View 1 Replies
View Related
