I was wondering if i should use the same RADIUS VSA attribute on ACS v5.1 to authenticate AAA clients as those i was using on my old ACS v3.3 server.
Example : under ACS v3.3 i was using RADIUS (Cisco Aironet) attribute to authenticate AP & WLC, should i do the same under ACS v5.1 ?
I am trying to configure AAA authentication and authorization with Cisco 3725 (IOS 12.4(17)) for 802.1x and ACS 4.2 with VLAN assignment to my Windows XP client. (trying to assign VLAN 100 in my scenario).When user connects to the Router, it passes the authentication process (EAP-MD5). In my debug i see that Router recieves the Radius Attributes BUT does not apply anything!My running config:
Building configuration...
Current configuration : 1736 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
[code]......
As a result the vlan-switch data based does not change.
I am trying to integrate Cisco ACS 5.2 in a network to do device authentication of switches for administrators.
I am not sure if Cisco ACS 5.2 support RADIUS protocol to do device authentication. In the configuration of the Cisco ACS 5.2 I can only see TACACS authentication for device authentication and I have configured it and it works. If CISCO ACS 5.2 supports RADIUS auth for device authentication?
I use vmware workstation, and doing small networking project.i use 1 windows server 2008 x64 sp1 as DC, DNS and DHCP with 2 nic(1 nic for local(vmnet2) and 1 for internet(NAT)) and i use 1 windows 7 client machine.in server local nic settings are ip 200.200.200.1 sm 255.255.255.0 gw: empty dns 200.200.200.1
and internet nic settings all set automatic.and in DNS i added forwarder as my company's actual DNS server name.My requirement is client should browse internet by resolving through my dns server.but the problem is my server is having internet but my client windows 7 does not have internet
I'm trying to configure ACS 5.4 as radius server for network access (PPP connections).In monitoring and reports the users have green color , but the clients cannot send data. Auth method is CHAP/MD5.
Allowed protocols are set to CHAP and PAP only.
my customer has FreeRadius, and I'm trying to get the server to assign a network admin role to a 5K running 5.0.3 code.This is based on the example given in this document: url...The server authenticates the user name, but will only put the user into the network operator role. This is confirmed by checking the output of show user-account and debug security user-db.The Radius test using the same credentials passes the authentication test. I'm sure the problem is that the N5K dosent understand the VSA format of the attribute, and that this is a simple syntax problem.
View 2 Replies View RelatedI'm trying to use 802.1x to authenticate clients on my network with dynamic VLAN assignment from RADIUS. We have IP-Phones(powered by PoE) that only supports EAP-MD5, and we would rather use MAB(it also uses LLDP-MED for some settings) to authenticate the phones using the MAC-range from the phones vendor. The following scenario works perfect:Connect the phone and let it boot up(takes a while) and authenticate with MAB.Connect a computer in the phones data-port and let it authenticate with 802.1x(or fail and reach guest-vlan) However, the following scenario doesn't work:The computer is already connected to the phoneThe phone is then connected to the switch What happends now is that the computer is authenticated using 802.1x before the phone boots up and get's authenticated with MAB. When the phone is ready, it's authenticated with MAB and everything works. However, after a short period(let's say a minute), using `debug authentication all`, we see a "NEW LL MAC: phones mac" message(which is weird since the mac has already been MAB-authenticated), and then we are unable to contact the phone using ping. When I check `show mac address-table` it has now moved the mac from `Port Gi 0/12` to `Port Drop`. However, if I check `show mab interface Gi 0/12` or `show authentication sessions` it lists the phones-mac as `mab auth sucess `.why the first scenario works, and not the second?
The switch is a 3560E PoE 24p with IOS 12.2.58SE2. Sample of the switch-config: network-policy profile 1voice vlan 90!interface GigabitEthernet0/12switchport mode accessnetwork-policy 1authentication control-direction inauthentication event fail retry 1 action authorize vlan 60authentication event server dead action authorize vlan 60authentication event no-response action authorize vlan 60authentication event server alive action reinitializeauthentication host-mode multi-domainauthentication order mab dot1xauthentication priority mab dot1xauthentication port-control autoauthentication periodicauthentication violation replacemabdot1x pae authenticatordot1x timeout tx-period 5dot1x max-reauth-req 1spanning-tree portfast!Btw, when we tried authenticating the phones using 802.1x too (EAP-MD5), there are NO problems in any of the scenarios. However, we want to use MAB instead of 802.1x to avoid the requirement of configuring the phones with a username and password. The RADIUS response was the same when using 802.1x as it is with MAB for the phones (including device-traffic-class=voice AV-pair).
Does anyone have or know of a tried and true method of configuring a Windows Server 2008 box to provide authentication/accounting services for Cisco devices. I've read a few websites already and a lot of them seem to be geared toward VPN and some of the settings each site goes through are different.I've got NPS installed and a RADIUS client configured with the shared key. Right now I'm in the process of creating the Network Policy which only allows a Windows "admin" group to log in. Curious about the "Constraints" section where the NAS Port Type is selected and the "Settings" section where the service-type and vendor specific options are configured.
View 18 Replies View Relatedgetting radius to work on a 2950G switch with an older IOS of 12.1(22)EA1. I have radius setup on a windows 2k8 box and all of my other switches 2960's and above have no issues. I am unable to input the nas-identifier of 32 into the config using - radius-server 32 attribute 32 include-in-access-req format %h as well as the aaa session-id common commands. Doing a debug radius says that the radius server is not defined.
View 5 Replies View RelatedWe have recently installed Cisco for our wireless solution. We are an education and are looking to let staff and pupils bring their own devices. The route that we are planning to take to let them join the school's WiFi is to implement a RADIUS server so that they can authenticate with their Active Directory username and password. I have tried to test the solution but so far without any success. I am using a Windows Server 2008 R2 as my NPS server, I have setup the Cisco controller as per below:
Security Tab | RADIUS | Authentication - I added my windows server there and the preshared key, the Network User and Management is ticket and the server responds to a ping command,In the WLANs Tab, I selected my test WLAN and under Security | AAA Servers I selected the RADIUS server that I configured in the Security TabI then try to logon to my test WLAN and on the Cisco WLAN controller I get the following error: AAA Authentication Failure for UserName:test User Type: WLAN USER
Before trying to tinker with policies on the Windows Server I was wondering if the RADIUS is correctly setup on the Controller or have I missed something obvious?
I would like to know if microsoft 2008 server RADIUS server could be use for authentication on Cosco 5508 instead of Cisco ACS.
View 4 Replies View RelatedI have an ACS 5.3 cluster, that is configured to use AD. There are a few wireless devices, and monitoring tools that do not have AD accounts. I would like to configure ACS to first check AD for the user authentication, and if that fails to roll over to the local (Internal Users) identity source where I can define these user accounts.
It seems that when the authentication hits the initial Identity Policy rule, it never moves onto the next one if the first fails.
Attached are screen shots that show how i'm configured for the test, i have a local user defined and I'm trying to log into the firewalls.
- Identity Definition : Screen shot of the main ACS definition for the rule i'm testing that's not working
- Identity Rule 1 : The configuration of rule 1 that if it fails i need it to move onto rule 2.
- Log Output : Screen shot for one of the failed attempts from the ACS View Log server.
Reason I need to configure it this way is:
- Wireless users authenticate to wireless using AD user accounts. Some hand held scanners do not support that and will need to authenticate using the MAC address.
- Authentication to Network devices for managment uses AD accounts. We have some monitoring tools that do not have AD accounts, and will need to be able to log into Network devices to issue some commands (Examples: Cisco Prime LMS and NCS, Infoblox NetMRI).
I have been given a new project at work, to configure a 881W for wireless capebilities. how to get it to work using local database for the users to authenticate against, but our goal is to authenticate against a radius server that we have in place for existing Juniper AP's.
I have looked at some documentation out there and I cant seem to find what Im looking for. What I need to find out is an example of how to setup a radius server so that the wireless user can authenticate against. I have found some docs on google but those go over radius server setups for logons to the router etc.
here is what I got so far
Building configuration...
Current configuration : 2005 bytes!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname 881W_AP!logging rate-limit console 9enable secret 5
[Code].....
I have this scenario, AS5510 ver 8.4(3), VPN Client 5.0.07, RADIUS authentication with IAS on Windows 2003 Server.The issue is that, establishing the connection with the VPN Client, if the user credentials are correct every things works fine, but if we introduce a wrong password I don't receive an error message or a again the authentication form.Nothing happens the VPN Client keep trying to "contact security gateway", after about 5 minutes it stops without any message.Debugging the authentication process in the ASA I see that if the password is incorrect the radius authentication response is "reject". I have also tried with a different version of VPN Client but nothing change.Using AnyConnect client every things works fine.
View 1 Replies View RelatedI'm using an ASA version 8.4.2 and a Radius Server.
Is-it possible to configure ASA for sending the name of the connection profile to the Radius Server ?
By default, the radius server doesn't receive this information.
I'm using Cisco VPN client 5.0.7 and Cisco ASA 5510 (7.4 and 8.4.2) VPN RAS solution. Clients are authenticated using certificates and AAA RADIUS (ACS 3.3) and AD.Each time, when client connects, ASA issues 2 RADIUS requests, first - correct one which is successfully authenticated by ACS and immediately - second which always fails. I couldn't find any information related to this strange behaivor. "Double authentication" feature (most likeable to its name) is accessible only to Anyconnect clients which we don't use. When I'm authenicated using group password, there is only one RADIUS request.What is the source of such behavior?The negative impact is that my logs are filled with spurious failed auth attempts, and users are incrementig failed attemps counter in AD.
Debug from ASA:
----First request----
RDS 10/24/2011 16:16:01 D 0232 14884 Request from host 172.16.8.1:1645 code=1, id=22, length=145 on port 1025
RDS 10/24/2011 16:16:01 I 2519 14884 [001] User-Name value: user1
RDS 10/24/2011 16:16:01 I 2519 14884 [002] User-Password value: B2 A9 D0 2D 15 5F B8 BB DB 1E 3A 38 F5 24 72 B5
RDS 10/24/2011 16:16:01 I 2538 14884 [005] NAS-Port value: -1072693248
RDS 10/24/2011 16:16:01 I 2538 14884 [006] Service-Type value: 2
[code]....
i am trying to connect clients to my AP1231 which is running C1200 Software (C1200-K9W7-M), Version 12.3(8)JED. Client authentication is against RADIUS server. [code]
View 3 Replies View RelatedI am currently useing ACS 5.2 and have no problem using Tacacs+ with AD access.
But with Radius it seems I can only get the Local identity store to work, need to do something special to get Radius to work with active directory with Cisco ACS?
i have a new server but the ISP gave me this address
IP 41.221.92.150
S/Mask 255.255.255.252
Gateway 41.221.92.145
P/DNS 41.221.87.2
A/DNS 41.221.81.132
how should I configure my server and the client cpu?
Using Cisco ASA I want the ssl clientless vpn users to be authenticated through a local Radius-Server. but it does not work, and on asa while i want to see (Debug Radius) output, there is no debuging msgs displayed. When i try to test the user which i have created on the ACS-Server 4.2, the test gets successful. where i have made a mistake in my configuration ?
View 2 Replies View RelatedI have been trying to get our IPS (ASA-SSM-10 and 4260) to authenticate with Cisco Radius ACS 5.2 and they are not working. However, I was able to get them working with Microsoft Radius. Below is the logs from the IPS:
evStatus: eventId=1321566464942057375 vendor=Cisco originator: hostId: NACAIRVIDLAB1 appName: authentication appInstanceId: 350 time: 2011/11/23 17:50:38 2011/11/23 09:50:38 GMT-08:00 controlTransaction:
[Code].....
I need to configure RADIUS VSA configuration for a my alvarion device. Following are the attributes that need to be configured.
- Packet Data Flow ID (ID 1, integer16)
- Direction (ID 4, integer8)
- Transport Type (ID 6, integer8)
- UplinkQoSID (ID 7, integer8)
- DownlinkQoSID (ID 8, integer8)
[code]....
I was able to configure the first 6 attributes, how can I add the Sub - TLV's ClassifiedID, Priority, VLAN-ID and Classifier Direction which come under Classifier. Don't see any option for that in ACS 5.x
We have 2 ACS 4.2.1 servers in Windows 2003 with SP2 installed. We have updated the first ACS to the latest patches for Windows. After that we started having problems. CSRadius either stops by itself or when some time passes we get the following error in Failed attempts "Unknown error". When we restart the ACS services by the GUI, it resumes until the next time it stops.Do you happen to know if we have any bugs related to Windows patches?
View 3 Replies View RelatedI have a questión about radius authenticaction with AD, when I log in into the network with user in AD and I make a mistake in password my radius authenticaction event in ACS 5.2 dont show me this logg. only show the authentication succeeded but dont show me the authentication failed. Maybe i must to enable same service to show the authentiaction failed. The Voice authetication works fine..
This is the confg in the port of the switch:
interface FastEthernet0/12 switchport mode access switchport access vlan 2 switchport voice vlan 10 authentication port-control auto authentication host-mode multi-domain authentication violation protect authentication event fail action authorize vlan 11 authentication event fail retry 2 action authorize vlan 11 authentication event no-response action authorize vlan 11 authentication periodic authentication timer reauthenticate 60 mab dot1x pae authenticator dot1x timeout tx-period 10 dot1x max-reauth-req 3 spanning-tree portfast end
Vlan 2: DATA
Vlan 10: VOICE
Vlan 11: GUEST
I have the next config of radius authentication:
aaa new-model
aaa authentication login default group radius local
aaa authorization exec default group radius local
aaa session-id common
ip radius source-interface Vlan31 vrf LEGACY
[Code] .....
I want to add Radius attribute to Rad ware devices , so I will have the option to grant "read only" permission to users. as I understand I need to add VSA for the "read only" permission, or configure specific "Service-Type value 255"
in the following picture you can see the required information from Rad ware:
I am using the Self RADIUS server in my Cisco ACS SE 4.2 appliance S. I have an AAA client C that interacts with S by means of the RADIUS protocol. This works fine, in that S correctly carries out authentication chores on username/password (PAP and CHAP) pairs received from C, sending back to C the corresponding Access-Accept packet when the authentication succeeds, or Access-Reject when it doesn't.
I have been able to import a set of three VSAs into S. Each of those attributes is of string type. I then configured in S a single user U with password P so that, whenever a U/P pair received in S from C is authenticated by S, S should send back to C, in the Access-Accept packet, the three attributes with the following values: [code]
With this setup, when an authentication is successfully completed by S, C receives 53 bytes worth of data from S every time. I am attaching a typical example, already disassembled. I have disguised the actual vendor ID, for legal reasons, but the rest is exactly as it was when received in C.
According to the disassembly, what we got is an Access-Accept packet, as expected. Its length is 53 bytes - again as expected, for this is the only packet that C has received from S here. However, the packet is incomplete, for attribute #3 is missing its value field.
Looking into the whole packet in more detail, it can be seen that while the wire format for the first attribute, namely, Frame-IP-Address, is correctly constructed, the remaining are not. For example, the sequence of bytes corresponding to the attribute #1 reads 1a 09 00 00 xx xx 2c 61 62 63. I believe that this is incorrect; it should be 1a 0a 00 00 xx xx 2c 61 62 63, for the wire format for this attribute consists of 10, not 9, bytes. I tried a few variations on the values for the attributes, and the results are always substantially the same, in that the wire formats for these attributes are always incorrect.
This all probably implies I have done something wrong when importing the VSAs into S, and/or when configuring things on S. I am therefore attaching the csv files I used to import my VSAs into S; as before, names and vendor ID are disguised, but their lengths are exactly the same as in the undisguised file. I used two csv files: One to import the vendor ID, and the other to import the VSAs under that vendor ID. As for user U, in S's administration GUI I clicked on User Setup and selected user U, moved to the bottom of the screen, where the attributes for this particular vendor were present,introduced the values for each attribute mentioned above, and made sure that button in front of each attribute was ticked.
Several of my older netscreen devices only support radius authentication and I'm having trouble migrating them from ACS 4.2 to ACS 5.1. When I try to authenticate, the authentication passes in ACS but it doesn't log you into the Netscreen (you see a auth failure in the Netscreen logs). I believe that the custom attributes are not being passed from ACS to the Netscreen. The custom attribute we are trying to pass is "NS-Admin-Privilege" with type integer and a value of 2. The netscreen is setup so that the user privledges are obtained from the ACS server.
Any setup where they are using Cisco radius authentication to authenticate Netscreen devices?
I've setup my ASA 5510 to use AAA to my Windows Server 2008 NAP. After many hours of troubleshooting I got my setup to work. The only thing I'm not satsified with at the moment is, that RADIUS is using PAP for communicating between ASA5510 and W2K8/NAP.I've tried ticking the box "Microsoft CHAPv2 Capable" box under Users/AAA => AAA Server Groups => Edit AAA Server.From EventViewer on W2K8/NAP I get Event ID 6278 and 6272., see attached filehow I change from the PAP to the CHAP protocol?
PS: ASA 5510 running ASA version 8.2(4) and ASDM version 6.3(5)
Wondering if it's possible to send a VSA from my radius server to my ASA-5505 that will instruct the ASA to use one of several split tunnel lists I have created, based on the user name supplied in the Radius request.For example, I can send a VSA of "ip:inacl#1=permit ..." and the ASA will dynamically create an access-list for that user.Is there a similar VSA for split tunnel?
View 8 Replies View RelatedI have defined Radius proxy on csg2 to external radius server, but pdp fails with Authorization failure message on GGSN and on Csg2 debut log I see “SAMI 3/3: Nov 23 15:11:43.937: RADIUS: Dropping the unsolicited RADIUS packet”
View 0 Replies View RelatedI need to add OPNET Radius attributes in ACS 4.2. How should I add a new VSA in ACS? The google search is pointing me to CSUtil.exe, and I cannot find this utility in the ACS install files. These are the values that I need added for OPNET. When configuring the RADIUS server to support the ACE Live Appliance, use the following Vendor Code and Vendor Specific Attribute (VSA): Vendor Code: 7119 VSA: 33.
View 2 Replies View RelatedWhen I upgraded my cisco 3750 ME from c3750me-i5k91-mz.122-46.SE to c3750me-i5k91-mz.122-58.SE2.bin all commands for radius disappeared? However, there are a lot of commands to ldap which was missing in the previous version. Seems as if the radius has disappeared and been replaced by ldap?
View 1 Replies View Related